Building Works

(with brief specification and reference to book of Quantity Unit Rate Amount

specifications)

[1] Applying general insecticide pest control treatment to 2120.00 Sqm 89.280

floors, cupboards etc including labour materials etc.

complete. Using Imidacloprid 30.5 SCas Per IS 6313 part -

II ( (0.075% concentration by mass) is recommended

10.5ml chemical diluted with 5 liters of water

application 0.5 litre chemical /Sqm of surface is

recommended as per I.S

[2] Providing and laying Mirror polished Machine polished 25.20 Sqm 2433.090

Granite stone slab 18mm (Average) thick for doors &

windows sill & Jams clading as per design including full

moulded round front steps & 1cm nosing & necessary

groove on trads of steps ;laid on 20mm thick cement

mortar 1:6 (1 cement : 6 coarse sand) jointed with gray

cement sluury including rubbing and polsihing etc.

complete.for Doors / windows sill & jams clading.

[3] Dismentling doors, windows, ventilators etc. (wood or 11.00 Each 244.980

Steel) shutters including chowkhats architraves, oldfasts

and other attachment etc. complete and stacking them

within all lead and lift. (ii) Exceeding 3 Sq.M. in area.

[4] Dismentaling tiled of stone floors laid in mortar 171.00 Sqm 46.770

including stacking of serviceable materilas and disposal

of unserviceable materials with all lead and lift.

[5] Providing 15mm thick cement plaster in single coat on 109.00 Sqm 194.070

Rough (Similar) side of single or half brick walls for

interior plastering upto floor two level and finished even

and smooth in (iii) Cement mortar 1:6 (1-cement:6-

[6] Providing and fixing standared extruded of alluminium 6.00 Sqm 1175.560

section of size 63mm x 38.10mm x 1.2mm @ Wt.

Kg/mt) with colour anodized alluminium frame for

ventilation with 5 mm thick frosted glass as details etc

complete for Ventilation {Colour as directed by Engineer

in charge except black & Alluminum section and glass

[7] Wall painting with Applying two coats of putty & two 62.00 Sqm 160.010

coats of primer of approved brand (three coats) plastic

emulsion paint of approved brand and manufacture on

undecorated wall surface to give an even shade

including throughly brushing the surface free from

mortar droppings and other foreign matter and sand

papered smooth.

Description of Item

(with brief specification and reference to book of Quantity Unit Rate Amount

specifications)

[8] Providing and laying Vitrified tiles 8 to 10 mm thick, 36'' 19.00 Sqm 1484.610

x 36'' in flooring treads of steps and landing laid on a bed

of 12mm thick cement mortar 1:3 (1-cement : 3-coarse

sand) finishing with flush pointing in white cement.

[9] Providing and laying Vitrified tiles 8 to 10 mm thick, in 1.00 Sqm 1538.850

skrting risers of steps and dedo on 10mm thick cement

plaster 1:3 (1-cement : 3-coarse sand) and jointed with

white cement slurry

[10] Providing and laying 60 x 60cm Antiskid Vitrified tiles 8 41.00 Sqm 1073.130

to 10 mm thick in flooring treads of steps and landing

laid on a bed of 12mm thick cement mortar 1:3 (1-

cement : 3-coarse sand) finishing with flush pointing in

white cement.

[11] Providing and laying Vitrified tiles 8 to 10 mm thick, in 116.00 Sqm 1538.850

skrting risers of steps and dedo on 10mm thick cement

plaster 1:3 (1-cement : 3-coarse sand) and jointed with

white cement slurry

[12] Provding and filling the joint with epoxy grout 3 mm 177.00 Sqm 25.250

width and 8 to 10 mm deep, including cost of necessary

materials, PVC spacers, filling grout and cleaning etc

complete as directed by engineer in charge. { Colour and

Pattern as directed by engineer in charge.}

[13] Providing and fixing door Single shutter having factory 24.00 Sqm 4515.710

fabricated std. Extruded aluminium colour anodized

hollow section {Section 63.50 x 38 mm x 2.50 mm thick }

for door frame, hollow portion of door frame shall be

filled with wood to be insert for durable grip of door

hinges, with factory made 38 mm.thick flush door both

side pre laminated with 6 Lever Mortice lock, SS Aldrop

30cm long, SS Handle size 15 Cm Long, Tower Bolt size

20 cm etc. as per detail colour & pattern approved by

this office including necessary anodized alluminum

fixtures and fastenings.

[14] Providing and fixing Anodized Alluminum Section Jindal 4.00 Sqm 2809.820

Deluxe Sliding Window System 27mm series THREE

track window as shown in elevation, shutter with 5mm

thick transparent plain float glass, with transparent

silicon sealant with allu. anosized coated fittings and

fixture etc complete.

[15] Providing and fixing standared extruded of alluminium 6.00 Sqm 1525.000

section of size 63.50 x 38.10 x 1.95 mm @ Wt 1.094Kg /

Rmt with colour Powder Coated alluminium frame with

5 mm thick transparent bronze colour tinted float glass

as details etc complete for Fix window.

Description of Item

(with brief specification and reference to book of Quantity Unit Rate Amount

specifications)

[16] Providing and fixing Safety grills of required pattern for 850.00 Kgs. 106.150

windows/ Door using necessary 16mm square M.S bar

at , M.S flats and other structural steel at 10cm C/C

horizontally spacing including cutting, welding and

fabrication etc. including one coat of primer of approved

quality and two coats of oil painting as per detail

drawing etc complete.

[17] Providing laying and jointing in true line and level 15mm 56.00 Rmt 72.650

dia. U.P.V.C. Pipe (SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two

metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost

of all materials.

[18] Providing laying and jointing in true line and level 25mm 62.00 Rmt 91.840

dia. U.P.V.C. Pipe (SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two

metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost

of all materials. [B] 25mm dia.

[19] Providing laying and jointing in true line and level 40mm 60.00 Rmt 148.120

dia. U.P.V.C. Pipe (SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two

metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost

of all materials.[D] 40 mm.

[20] Providing laying and jointing in true line and level 50mm 60.00 Rmt 195.670

dia. U.P.V.C. Pipe (SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two

metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost

of all materials.[E] 50 mm.

[21] Providing and fixing Stainless Handle vlave of aprroved 8.00 Nos. 259.570

brand (A) 15mm dia.,

[22] Providing and fixing Stainless Handle vlave of aprroved 6.00 Nos. 393.900

brand (B) 25mm dia.,

[23] Providing and fixing Stainless Handle vlave of aprroved 6.00 Nos. 611.050

brand (C) 40mm dia.,

[24] Providing and fixing Stainless Butterfly valve of IS 2.00 Nos. 699.930

aprroved brand (C) 50mm dia.,

Description of Item

(with brief specification and reference to book of Quantity Unit Rate Amount

specifications)

[25] Providing, laying and jointing in true line and level 75 40.00 Rmt 714.460

diametre U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall

be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size

mm diametre x 149 mm length x 145 mm heigh at every

2000 mm center to center or shall be concealed in walls

as directed including necessary fittings such as bends,

shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost of

all materials.

[26] Providing and fixing to wall ceiling and floor 10.0 Kg. 105.00 Rmt 336.240

F/Cm2 working pressure poluthene pipes of the

following outside Dia. Low densidy, complete with

special flange compression type fittings, wall clipsetc.

including making good the wall ceiling and floor. (A)

110mm dia.

[27] Providing, laying and jointing in true line and level 110 50.00 Rmt 835.150

diametre U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall

be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size

mm diametre x 149 mm length x 145 mm heigh at every

2000 mm center to center or shall be concealed in walls

as directed including necessary fittings such as bends,

shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost of

all materials.

[28] Providing, laying and jointing in true line and level 160 90.00 Rmt 831.220

diametre U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall

be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size

mm diametre x 210 mm length x 196 mm heigh at every

2000 mm center to center or shall be concealed in walls

as directed including necessary fittings such as bends,

shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost of

all materials.

[29] Providing and fixing MS Z clamp on Wall or celling for 708.00 Nos. 2903.750

Pipe Fitting including all type necessary fittings and

accessory etc. completed as per directed engineer in

Description of Item

(with brief specification and reference to book of Quantity Unit Rate Amount

specifications)

[30] Providing and fixing PVC SWR Nahni trap IS 14735 for 10.00 Nos. 558.360

drain - 100 mm diameter with jali of the following

nominal diameter of self cleansing design with C.I scread

down or hinged grating including the cost of cutting and

making good the walls.

[31] Providing and fixing screw down quarter turn bib taps of 12.00 Nos. 186.830

following size (A) Brass chromium plated screw down

bib tap (i) 15mm dia. or as per the instruction of

Engineer incharge.

[32] Providing and fixing CP brass Quarter turn pillar tap, 12.00 Nos. 308.730

capstan head screw down high pressure with screw,

shanks and back ndts (A) 15 mm dia Long pipe} or as per

the instruction of Engineer incharge.

[33] Providing and fixing wash basin with pedestal of std. 10.00 Nos. 1818.000

Height with single hole for pillar tap with C.I or M.S

brackets painted white including cutting cutting holes

and making good the same including C.P. brass waste

and waste pipes and bottal trap (A) Vitreous China: (ii)

Flat Back washbasin 550 mm x 400mm size.In colour.

[34] Provision and fixing water closet squatting orissa type 4.00 Nos. 1289.770

W.C. pan size 580mm integral footrest and 100mm p or s

trap and including 25mm dia. C.P. brass flush valve and

G.I. inlet connection etc. complet (A) Viterous china long

pattern white or colour

[35] Pro. & Fix.wash down water closet (European w. c .pan) 6.00 Nos. 3171.400

with integral" p " or " s " trap and PVC flushing cistern

with a pair of C.L.I. Or Mild steel Brackets, complete with

fittings such as lead value siphon, 15 mm. Nominal size

brass ball valve with polythene float, C.P. Brass handle

unions and couplings for connections with inlet, outlet

and over flow pipes, 40 mm. dia. flush bend including

cutting holes in walls and making good the same

connecting the flush bend with cistern and closet etc

comp incl plastic sheet cover including jointing trap with

pipe in cm 1:1 (a) Viterous china in white or colour

[36] Providing and fixing Special Needs Range CRUSE SET, 1.00 Nos. 58378.000

EWC, 710 x 370 x 810 mm, New Cat No: S1021113 S

Trap, S1021114 P Trap, S1060106 Cistern, B1520118

Soft Close Seat Cover, B1810112 Twin Flush Fittings,

S2040101 Wash Basin 510 x 400 mm, F9030451 Spatula

Lever basin mixer, B2210106 Wall mounted Grab bar

600 mm long, B2210106 Wall mounted Grab bar 600mm

long, B2210108 Wall mounted Hinged rail 750 x

{Cera or equivalent} as directed by Architect Office

{SUGAMYA BHARAT Instruction}

Description of Item

(with brief specification and reference to book of Quantity Unit Rate Amount

specifications)

[37] Providing and fixing urinal of approved quality 4.00 Nos. 1036.270

connecting the urinal with P.V.C waste pipe, trap etc.

complete. (A) White earthenware flat back or corner

type size 430mm x 260mm x 350mm.

[38] Providing erecting and fixing double coated 4-layer 4000.00 Litre 8.590

tough virgin plast ISI water tank of required capacity

each with all necessary fittings and connection etc.

complete on terrace.

[39] Providing and fixing 600mm x 450mm bevelled edge 6.00 Nos. 833.730

mirrror of superior glass mounted on 6mm thick A.C.

sheet or plywood sheet and fixing to wooden pluge with

C.P. brass screws and washers.

[40] Providing and fixing C.P. brass towel rail comlete with 3.00 Nos. 603.190

C.P. brass brackets fixed to wooden plugs with C.P. brass

scews. (B) 600mm x 20mm size.

[41] Providing and fixing S.W. gully trap with C.I. grating 5.00 Nos. 1246.920

brick masonry chamber and water tight C.I. cover with

frame of 300mm x 300mm size (inside) with standard

weight. (i) Square mouth traps. (B) 150mm x 100mm

size P of R type

[42] Providing and fixing CP brass screw down stop cock of 12.00 Nos. 205.830

approved quality 15mm size with adjustable wall

flange..or as per instrction of engineer incharge.

[43] Providing and Fixing Impulse Blackout Roller Blinds 27.00 Sqm 2562.993

with fabric of 0.53mm thickness and Top channel of non-

rusting aluminium alloy with 1.25mm thickness and

bottom channel of 1.50mm thickness & 21mm diameter.

Tilt channel of ABS plastic with 1.50mm polyster cord

with 4.50mm balls with stop lock arrangement including

all necessary fixture, fastners, fittings, labour material

machinary etc complete as seletced and diretced by

Engineer Incharge.

Description of Item

(with brief specification and reference to book of Quantity Unit Rate Amount

specifications)

[44] Providing And Arranging table for judge chamber having 1.00 Nos. 51685.790

overall thickness of Top 40 mm (18+18+4mm) 18 mm

thick MR Grade plywood and 4.00 mm thick veneer at

top with melamine polish finish including 8mm thick

back painted glass. Top to be made from 75mm x 50 mm

Indian teak wood with half round moulded on long side

with melamine polish. Leg 50 mm x 50 mm x 1.6 mm

thick CRCA Square pipe and supporting pipe 50 mm x

25mm x 1.8 mm finishing with epoxy powder coated

micron with leveller. Appron having 18 mm thick MR

Grade plywood with 4.00 mm thick veneer having

melamine polish finish. Drawer Unit-450 x 550 x

mm having all Structure 18 mm thick MR grade plywood

with veneer and teakwood border of specified size with

melamine polish finish. Drawers (3 Nos) slides on Ebco

make telescopic channel with Godrej make lock with two

keys and necessary fixtures and fastening as approved

with balancing laminate inside 0.8 mm thick of approved

shade including all materials and labour etc. Complete as

per drawing and instruction of engineer-in charge. Side

Unit to be provided saparetly.Judge Table with MDU

veneer Size :- 1800mm x 900mm x 750mm

[45] Providing and Arranging side unit with top 40mm 3.00 Nos. 27475.900

overall thickness made from 18 mm thick MR grade

plywood with 4.00 mm thick veneer on top with

melamine finished polish. Side and drawer made of

18mm thick MR grade plywood with 4.00 mm thick

veneer with melamine finished polish and inside 0.8mm

thick balancing laminate of approved shade. Teakwood

border with melamine finished polish of specified size to

be provided all around the borders of plywood. Drawer

run on Ebco make telescopic channel with Godrej make

lock with Two keys and shutter fixed with auto hinges

incld. all necessary fixtures and fastening as approved

and back of the unit with 6mm thick MR grade playwood

with 0.8 mm thick laminate of approved shade with

nylon bullet including all materials and labour etc.

Complete as per drawing and instruction of Engineer-in

charge .Side Table veneer Size :- 1200mm x 450mm x

[46] Providing and Arranging book storage having top 18 mm 2.00 Nos. 47924.960

thick MR grade plywood with 4.00 mm thick veneer

melamine polish finish with 0.8 mm balancing

laminate.Shelves made of 12 mm thick clear float glass

with all edge polish. Side and shutter made of 18mm

thick MR grade plywood with 4.00 mm thick veneer

melamine polish finish with 6mm thick clear float glass

and Lock and nylon bullet including all necessary

fixtures and fastenings as approved, incld. all materials

and labour etc.Complete as per drawing and instruction

of engineer-in charge (with T.W. border patti with

melamine polish) Glass Storage veneer : 900mm x

Description of Item

(with brief specification and reference to book of Quantity Unit Rate Amount

specifications)

[47] Providing and Arranging PREMIUM EXECUTIVE 1.00 Nos. 33439.010

REVOLVING CHAIR (High Back) Sigma chrome Base with

Knee Tilt Synchro Mechanism with Any Position back

Lock, Seat & Back - Made from High Density U - FOAM,

Arms - Aluminium Die Casted with Cushion Pad

Including all materials and labour etc. Complete as per

drawing and instruction of engineer-in charge.Size : max

Height : 1290 mm to Min. 1170mm, Seat : 530 mm. x

mm. back 740 mm x 500 mm.

[48] Providing and Arranging fix chair having structure of 30.00 Nos. 5909.830

CRCA M.S. pipe 20mm dia and 16 guage with 50 micron

powder coated of approved seat and back 40 density PU

foam covered with fabric of approved shade and texture

with one year replacement warranty. Wooden armrest

to be provided as per approved design. Complete chair

should be in suitable shape including all materials and

labours etc. complete as per drawing and instruction of

engineer-in charge. Vita 1001 Chairs

[49] Providing, fixing & Arranging linear workstation as per 5.00 Nos. 19429.570

drawing,framing the skeleton with 18mm + 18mm thick

vertical and horizontal plywood patti both side cover

with 6mm thick plywood for grooving design and

finishing with seletced laminate 1.00mm thick.Before

installation,make hole/face plate for conduit pipes of

eletcrical/networking cables with openable stud from

horizontal partition.vertical support of 18mm + 18mm

thick double plywood cover with 1mm laminate finish

including 18mm thick curvica on exposed edges.Fitted

25mm thick (Partical board,interior grade) post forming

laminated top, fixed with metal clamps including

suspended metal keyboard-mouse tray fixed with

telescopic channel,cable manager and separate drawer

with lock,telescopic channel and box,made from 18mm

plywood with 1mm outside and 0.8mm inside laminate

as well as 18mm post forming outside of shutter with

auto hinges of hafele or equivalent for left or right

side.Drawer run on Ebco make telescopic channel with

Godrej make lock with Two keys.Providing and fixing of

softboard (12mm thick) finished with tapestry of good

quality.partition hight 1200mm.Including all materials

and labour etc.Complete as per drawing and instruction

of engineer-in charge. W/S with MDU Size :- 900 x

[50] Providind and Arranging Medium Back Chair - Seat & 30.00 Nos. 15219.830

back cushioned on ply, aluminum die casted arms with

cushioned pad, Synchro mechanism with single back

lock, gas lift, chrome base.Including all materials and

labour etc.complete as per detail drawing and

instruction of engineer-in charge.Size : max.Height

1070mm, Min.970mm,Seat: 490mm x 510 mm,Back :

640 mm x 510 mm MARCO 1002 Meduim back Chairs

Description of Item

(with brief specification and reference to book of Quantity Unit Rate Amount

specifications)

[51] Providing and Arranging three seater gang seater having 5.00 Nos. 14976.970

seat and back made from CRCA capcular Tubular frame

welded with perforated Die moulded CRCA sheet. base

frame made from round Tubular welded with horizontal

beam Two side armrest welded with frame including

finishing metal parts with epoxy polyster powde coating

of 50 micron thickness Including all materials and labour

etc.Complete as per drawing and instruction of engineer-

in charge 3 Seater S.S. Gang Seater : HOF MAKE :

[52] Providing and Arranging 50mm thick Seat cushion for 20.00 Nos. 892.960

chair made from 40 density foam with 12mm supersoft

HD for softness Covered with high quality fabric (Basic

Rate Rs. : 400 / Rmt) of approved shade including all

materials and labour etc.Complete as per drawing and

instruction of engineer-in charge. Chair Cushion : size -

[53] Wall painting with Applying two coats of putty & two 913.00 Sqm 160.010

coats of primer of approved brand (three coats) plastic

emulsion paint of approved brand and manufacture on

undecorated wall surface to give an even shade

including throughly brushing the surface free from

mortar droppings and other foreign matter and sand

papered smooth.

[54] Wall painting with Applying two coats of putty & two 805.00 Sqm 165.280

coats of primer of approved brand & (three coats) with

plastic emulsion paint of approved brand and

manufacture on undecorated ceiling surface to give an

even shade including throughly brushing the surface

free from mortar droppings and other foreign matter

and sand papered smooth.

[55] Finishing wall with weather proof exterior emulsion 1608.00 Sqm 114.530

paint on wall surface (two coats) to give an required

shape even shade after thoroughly brushing the surface

to remove all dirt, and remains of loose powdered

materials.etc complete

[56] Providing and laying Syn-roof High bond centromeric 741.00 Sqm 569.640

premium quality acrylic coating as a water proofing

membrane finished which consists of a coat of bitumen

primer & 80GSM membranes in sunk slab, on terrace

slab with ultraviolet resistance and working up to any

height etc. complete as directed by Engineer in Charge of

surface excluding grading complete.

Description of Item

(with brief specification and reference to book of Quantity Unit Rate Amount

specifications)

[57] Distempeing (Two coats) with oil bound washable 1963.00 Sqm 71.900

distemper of approved brand and manufacture and of

required shade on wall surfaces to give an even shade,

over and including a priming coat with alkali resistance

primer of approved brand after thoroughly brushing the

surface and other foreign matter and also including

preparing the surface even and sand parpered smooth.

[58] Painting Two coats (excluding priming coat) on 225.00 Sqm 55.210

previously painted steel and other metal surface with

enamel paint, brushing to give an even shade including

cleaning the surface of all dirt, dust and other foreign

[59] Providing & arranging Wheel chair for Physically 2.00 Nos. 10929.140

Hanicapped person having. Dimension 790 (L) X

(W) X 70 (H) MM . WITH FOLDABLE FRAME Structure

made of carbon steel setction 22 x 1.2 mm. A3 carbon

sheet with crome finish cross bars made of A3 carbon

Steel material with setcion 25.4 x 1.2mm, 24 inch solid

mag wheels with alloy in the in the rim, hand rim of

section 16 x 1.2 mm . carbon steel with chrome finish,

front wheel of 8 inch hub made of PA polymer and outer

side of solid rubber pu moulded armrest & base made of

abs, leather finish calf rest and seat with cushion

alumuinum footrest with with updown movement

having extended base footpress with moulded plastic

including handbrakes & full structure is anti rust chrome

finish with user capacity of 100kg. Including all

neccasary fixture, fatser,fittings, labours materails

engineer incharge

[60] Providing and casting in situ Ordinary cement concrete 30.00 Cum 3637.070

M-150 for R.C.C. Raft and cut-off walls including

necessary shuttering laying, vibrating, ramming and

curing complete.

[61] Providing and fixing pre-cast Rubber Dye / steel Dye 300.00 Sqmt 686.900

inter locking concrete block 60mm thick with grade of

concrete M300 pnumatic compressed / vibrated

mechanically and as per approved design Confirming to

IS 15658 : 2006 including 35 mm Sand layer for levelling

and filling the joint with sand in proper line and level as

per guidlines of IRC : SP 63-2018 etc. Complete.

[62] Structural steel work (Confirming to IS 4923-1997) 300.00 Kg 127.950

riveted, bolted or welded in builtup for all type sections,

in framed work, including cutting, hoisting, fixing in

position and applying a priming coat of approved steel

primer all complete as per the structural designs and

directions of Engineer in charge.Column (122 x 61 x

Description of Item

(with brief specification and reference to book of Quantity Unit Rate Amount

specifications)

[63] Providing corrugated G.I. sheet of class-3 roofing fixed 602.00 Sqmt 727.130

with glavanished iron J or L Hooks, Bolts and nuts 8mm

diameter with bitumen and G.I. limpet washer or G.I.

limpet washer. filled with white lead complete excluding

the cost of purlins, Rafters and Trusses. (1) 0.80 mm

thick sheet.

(A) Total Tendered Amount…..................................................

(B) Rebate on above tendered amount (if any) % (in figure) ………………………………

(in words) ………………………………………………….…………………………………………………

(C) Net Tendered Amount (A-B) (in figure) ………………………………

(in words) ………………………………………………….………………………………………………...

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C.

items where there is a change as per actual mix design the cost of difference of cement consumption

have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

5. Credit of Dismantal Material amount of Rs. -------- must be recovered from Contractor's R.A Bill.

6. Payment will be given only if the material testing result is satisfactory.Testing of material shall be

done as per statement attached with specification

Dated Signature Deputy Executive Engineer Executive Engineer

the Contractor. R & B Sub Division Kheda R & B Division

Nadiad Nadiad