CERTAIN REPAIRS TO BUILDINGS AT 314 FD HOSPITAL UNDER GE CLEMENT TOWN

Amount

Dismantling asbestos cement (corrugated, semicorrugated etc) sheets in roof coverings complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge and any thickness as in roof covering complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa and 150AZ as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa and 150AZ as in roof covering/cladding to wall, ridge etc fixed with self tapping screws complete all as specified and directed.

S&F of 1.00mm thick plain galvanised iron sheets fixed with self tapping screws using grade of zinc coating 275 for both in ridges, hips, valley gutters, drip and straight flashings etc, fixed in any pattern complete all as specified and directed.

S&F 6 mm thick cement, corrugated or semicorrugated sheets as in roof covering, walls etc fixed to purlins rafters etc complete all as specified and directed.

Demolition of cement cocrete any description and in any position not otherwise specifically provided for complete all as specified and directed.

M & L cement concrete type B1, (1:2:4) (using 20 mm graded crushed stone agreegate) as in roof kerb or mud stop rounded or chamfered on edges complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

Dismantling timber as in scantling 40 sqcm and over in section in any position unframed work complete all as specified and directed.

All as per item No.10 here-in-before but as in fillets rails posts rafter etc under 40 Sqcm in section in any position unframed work complete all as specified and directed.

M&L for GI snap grid framework including 4mm thick E-boards for false ceiling (grid size 605mm x 605mm ) including necessary notching and preparing holes and hangers 2mm dia GI adjusting level fixed to structural members. Galvanised steel section of exposes T section grid with exposed flange faces duly powder coated white/ivory colour. The suspension system consisting of perimeter wall angle of size 20x20x0.45mm of GS sheet to secured on wall/partition face with the help of rawl plug screws @450mm c/c. Universal T shaped main runner with single rotatary stiching of size 35x24mm made from 0.33mm thick GS sheet of length 3.60m to be spaced @1200mm c/c. Cross T shaped runner of size 25x24mm with double thick GS sheet 0.25mm thick spaced @ 600mm c/c. To form 600x600mm size module, intermediate T shaped cross runner of size 25x24mm made from 0.25mm thick GS sheet of length 600mm is placed inside the module of size 1200x600mm including suspension of the ceiling frame from structural members with 2mm thick GI wire and level adjusters all cut out etc to the required line and shape as per manufacturer recommendations complete all as specified and directed.

Dismantling structural steel work including doors, gates and similar work complete all as specified and directed.

Excavating in post holes ( or similar holes) each n exc 0.5 cum, getting out in any type of soil returning filling in and ramming earth or broken rubble in layers n exc 25cm complete all as specified and directed.

M & L steel work as in hollow tubular/ rectangular/square section as in posts, purlines, rafters etc including welding complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.

M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and directed.

M&L for half brick work with subclass ‘B’ bricks, straight or curved on plan to any radius built in CM (1:4) complete all as specified and directed.

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for 15mm thick plaster in CM (1:6) on fair face of brick walls finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick plaster in CM (1:4) on fair face of brick walls finished even and fair without using extra cement complete all as specified and directed.

Demolition of cement concrete (Un-reinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and directed.

M&L 40mm thick PCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate) laid in panels as in flooring including finishing top surfaces even and smooth without using extra cement complete all as specified and directed.

S&F 3mm thick and 38mm wide glass dividing strips as in floors inserted in position, conform to design complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C2 (Using 40mm graded crushed stone aggregate) as in plinth protection/path laid in panels, finish the top surfaces even and smooth complete including filling the joints with mastic compound all as specified and directed.

M&L 30 mm thick PCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in sub base of floors finishing even and fair complete all as specified and directed.

M&L for Non Skid coloured ceramic tiles 8-9mm thick grade-4 (square/ rectangular) area of each tiles exc 0.18 Sqm but n. exc 0.38 Sqm (600x600mm) as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4) to recieve tiles complete all as specified and directed.

M&L for Non Skid coloured ceramic tiles 8 to 9mm thick grade-4 (square/ rectangular) area of each tiles exc 0.18 Sqm but n. exc 0.38 Sqm (600 x 600mm) in vertical surface as skirting/dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar (1:6) complete all as specified and directed.

M&L for coloured Glazed ceramic tiles in vertical surfaces 300mmx450mmx 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over and including 10mm thick rendering or bedding layer of cement mortar (1:4) complete all as specified and directed.

M&L for Non Skid coloured ceramic tiles 7 to 8mm thick grade-4 (square/ rectangular) area of each tiles exc 0.11 Sqm but n. exc 0.18 Sqm (400mmx400mm) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar (1:6) complete all as specified and directed.

M&L for 75mm thick PCC (1:4:8) type D2 (Using 40mm graded crushed stone aggregate) as in path finish the top surfaces even and rough to receive top layer complete all as specified and directed.

M&L for white marble 18 to 20mm thick (table rubbed and polished) in floor, steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed.

M&L for machine cut Kota stone slab 10-12 mm thick as in skirting/dado, pillars, window cills and the like, laid over and including 10mm thick rendering in cement mortar (1:4), set & jointed with grey cement slurry and pointed in white cement mixed with pigment to match the shade of the slab including cutting, rubbing and polishing to achieve mirror finish complete all as specified and directed.

M&L Kota stone slab 18 to 20 mm thick as in floors etc laid over and including 20mm thick screed bed in CM (1:6) set jointed and pointed with grey cement and pointed to match with shade of slab including cutting rubbing and polishing to achieve mirror polish surface complete all as specified and directed.

M&L for rubber moulded coloured glossy finish cement concrete chequered tiles of size 30cm X 30cm X 20mm thick jointed in neat cement slurry and pointed in white or coloured cement and pigment to match the surface of tile as in floor over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

Cutting and grinding to existing kota stone flooring incl rubbing polishing to achieve mirror finish complete all as specified and directed.

M&L for PCC (1:2:4) type B0 (using 12.5mm graded crushed stone aggregate) as in coping including necessary form work complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of internal acrylic distemper including a coat of primer of approved tint over a coat of wall care putty to make the surface smooth complete all as specified and directed.

M&L for preparation of old decorated surface of internal wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers and applying two coats of acrylic distemper over a layer of wall care putty to make the surface smooth using roller all as specified and prescribed by manufacturer of paint complete all as specified and directed. Note:- (i) The old surface must be prepared in a manner so that there should not be any impression of dent and it should be made even and smooth all as per manufacture’s instruction before application of distemper. The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the rates quoted. (ii) All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by department for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iii) After carrying out preparation of surface the same shall be got approved from GE before application of distemper for each building. (iv) The colour / shade will be all as approved by GE.

M&L for preparation of newly plastered surface of external wall all as prescribed by manufacture of paint and applying two coats of exterior anti fungal acrylic emulsion paint (walmista of Berger paint or equivalent in Asian paint, Nerolac etc having three years of performance warranty) over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint complete all as specified and directed. Note:- 1. The newly plastered surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of emulsion paint. The cost of all materials, T&P and labour required for preparation of surface are deemed to be included in the rates quoted. (ii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by department for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iii). After carrying out preparation of surface the same shall be got approved from GE before application of distemper for each building. (iv). The colour / shade will be all as approved by GE. (v) The cost of Scaffolding wherever required are deemed to be included in the rates quoted by the contractor.

M&L for preparation of old decorated surface of exterior wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with dust extraction system for clean environment certified by reputed paint manufacturers, then washing the surface with Bleaching powder solution for treatment of fungal growth and applying two coats of exterior anti fungal acrylic emulsion paint (wallmista of Berger paint or equivalent in Asian paint, Nerolac etc having three years of performance warranty) over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint complete all as specified and directed. Note:- (i) The old surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of distemper. The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the rates quoted. (ii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by department for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iii). After carrying out preparation of surface the same shall be got approved from GE before application of distemper for each building. (iv). The colour / shade will be all as approved by GE. (v) The cost of Scaffolding wherever required are deemed to be included in the rates quoted by the contractor.

M&L for plain cement concrete (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as in surface channel or drain or benching in manhole complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitered/stopped ends etc complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size n.exc 1.50 Sqm complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size exc 1.5 Sqm and n.exc 4 Sqm complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm but n. exc 2 sqm each complete all as specified and directed.

All as per item No.49 here-in-before but shutter n exc 1 Sqm each complete all as specified and directed.

S&F 30mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type both sides complete all as specified and directed.

S&F second class timber framed wrought and framed hard-wood in scantlings complete all as specified and directed.

S&F 30mm thick 2nd class hard wood glazed and skelton shutter, open rebated and prepaned to receive glass, gauge etc divided in to square with plain and mitred beads and rebated sash bars any numbers edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specifed and directed.

S & F sheet glass ordinary quality 4 mm thick n exc 0.5 sqm each pane fixed with wooden beads or with glass putty complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm both side prelam PVC sheet and edges will be painted to match with the prelam sheet reinforced with MS square tube in opening incl necessary fixing arrangements as per specification and drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded prelam PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet for top rail, lock rail and bottom rail on either side as gap insert for top rails, bottom rail, panelling of both side prelam PVC sheet to be fitting in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement in the frame at site as per specification and drawing

S&F 250mm stainless steel sliding door bolts, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F 100mm size stainless steel butt hinges medium weight ISI marked, cold rolled complete all as specified and directed.

S&F 75 mm size stainless steel butt hinges medium weight ISI marked, cold rolled complete all as specified and directed.

S&F 200mm long stainless steel barrel tower bolts complete all as specified and directed.

S&F 150mm size stainless steel handles complete all as specified and directed.

S&F 100 mm size stainless steel handles complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint to new undecorated wooden surfaces over a coat of pink primer including preparation, over 10cm width or girth complete all as specified and directed.

M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, not otherwise described and applying one coat of synthetic enamel paints over 10cm width or girth complete all as specified and directed.

S&F in repair of 20mm dia SS drapery rod, fancy type, SS knobs and brackets, fixed in any length complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed.

S&F 15 mm bore dia of medium grade galvanised steel tubing with all fittings including tank nipple and fixed complete to wall or laid in floor including cutting through walls, floors, etc and their making good with existing surface complete all as specified and directed.

S&F 15mm bore gun matel globe or gate valve with iron wheel, screwed both ends for iron pipes complete all as specified and directed.

Taking up or down 20mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed.

S&F 20 mm bore dia of medium grade galvanised steel tubing with all fittings including tank nipple and fixed complete to wall or laid in floor including cutting through walls, floors, etc and their making good with existing surface complete all as specified and directed.

S&F in repair triple layer (ISI marked) rotational moulded PVC water storage tank cylinderical, vertical with closed top hoisted and fixed in position tank capacity 1000 Ltr with and including PTMT float valve 20mm dia and making connection for inlet and outlet complete all as specified and directed.

S&F 20mm bore gun metel globe or gate valve with iron wheel, screwed both ends for iron pipes complete all as specified and directed.

S&F in repair vitreous china water closet Orissa pattern of size 580mm X440mm white ISI marked including provn of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified and directed.

S&F in repair vitreous china white wash hand basin OVAL SHAPE of size 550x400mm including CI/MS brackets including cutting for and pinning in brackets but including waste pipe complete all as specified and directed. Make : Cera/Hindware/Parryware

S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action push type with inlet ball valve and float including flush pipe long 32mm dia, ball valve, handle, bracket etc complete all as specified and directed. Make : Cera/Hindware/Parryware

S&F in repair 15mm dia brass chromium plated Bib tap fancy type long body with wall flange complete all as specified and directed.

S&F in repair 15mm dia brass chromium plated pillar tap long swan neck with longscrewed for 15mm bore dia of pipe complete all as specified and directed.

S&F in repair 15mm Stop valve angle cock fancy type, chromium plated with long high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair PVC connection 15mm bore dia 450mm long with 2 Nos PTMT nuts with washer complete all as specified and directed.

S&F in repair 32 mm dia PVC flush pipe of polyethylene of low or high density for WHB, sink, urinal complete all as specified and directed.

S&F in repair 110mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches/floor or fixed to wall including necessary clamps complete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches/floor or fixed to wall including necessary clamps complete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cement including fixing waste pipe etc complete all as specified and directed.

S&F in repair PVC (SWR) junction single, (Single T) equal or unequal 110mm bore with access door complete all as specified and directed.

S&F in repair PVC (SWR) bend any radius 110mm bore complete all as specified and directed.

S&F in repair PVC (SWR) bend any radius 75mm bore with access door complete all as specified and directed.

M&L for reinforced precast cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in landings, cover slabs (for manholes /drain covers etc), shelves and similar articles (shape and size as directed) with plain faces including necessary form work, set in CM (1:4) complete all as specified and directed. (Note : Reinforcement shall be measured and paid for separately.)

S&F mild steel framed work as in manhole cover frames conforming to Fe 410-W (Gde-E-250) quality 'A' complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed.

P K ASSOCIATES

Nanda Brothers

RADHA ENTERPRISES