Construction of Govt. Senior Secondary School Dhaliara Tehsil Dehra Distt. Kangra HP

Amount

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains of soil such as pick work, jumper work, pick jumper work, blasting work, soft and hard blasting and saturated soil, de-watering, including wedging out rock where blasting is prohibited, chiseling or any other mixed variety of soil including shoring, strutting or bailing out water upto any depth or any height quantum of water including de-watering removal of slush and stacking the serviceable and un-serviceable material clear from the edge of excavation as direction of Engineer-in-Charge and returning the stacked soil in 15cm (fifteen centimetre) layers, when required into plinths, sides of foundation etcetra consolidating each deposited layer by ramming, watering and then disposing of all excavated earth as directed by Engineer-in-Charge including carriage of material within all leads and lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST and any other taxes imposed by the Government.

Filling in plinth with sand of approved quality under floors including watering ramming, consolidating and dressing complete as per HPPWD specifications and as directed by Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetra, with wooden battens and ballies, height of propping and centering in all heights. below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in foundation footings, basis of columns etcetera and mass concrete, and as directed by the Engineer-in-Charge including carriage of material. Within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax and any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetra, with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings, shelves, and the like floor, etcetra. up to any thickness, up to all floor level and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax and any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeter) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetra, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Columns, pillars, posts and struts, (square, rectangular/ polygonal in plan), upto all floor level, and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax and any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetra, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams, cantilevers, girders and lintels, sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto any depth/heights, up to all floor level and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals.The rate is including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax and any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone aggregate 40mm (Forty millimeter) nominal size) and curing complete, in or under water, including pumping or bailing out water/dewatering, removal of slush which may arise at the time of laying under water complete excluding the cost of form work in foundation and plinth in all depths/heights as per HPPWD specifications and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST and any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:6:12 (one cement isto six sand isto twelve graded crushed stone aggregate 40mm (forty millimeter) nominal size) and curing complete, excluding the cost of form work in foundation and plinth/under floors in all depths including pumping or bailing out water/dewatering and removal of slush as required at site complete as per HPPWD specifications and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Royality, Malkhana, Toll tax, Sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete mechanically mixed and vibrated Grade M-20 mix design to obtain the minimum crushing strength of 20N/mm2 with minimum cement contents of 330 Kgs/cum mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundation, footing , basis of columns and the like and mass concrete work in complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as per directed by the Engineer-in-Charge. The rate is inclusive of Octroi, Royality, Malkhana, Toll tax, Sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete mechanically mixed and vibrated Grade M-20 mix design to obtain the minimum crushing strength of 20N/mm2 with minimum cement contents of 310 Kgs/cum mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landing shelves and their supports balconies, beams , girders, bressumers and cantilevers upto floor two level. concrete work in complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as per directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete mechanically mixed and vibrated Grade M-20 mix design to obtain the minimum crushing strength of 20N/mm2 with minimum cement contents of 310 Kgs/cum mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in Coulumn, pillars posts and struts above plinth upto floor two level. complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as per directed by the Engineer-in-Charge. The rate is inclusive of Octroi, Royality, Malkhana, Toll tax, Sale tax, GST and any other taxes imposed by the Government.

Providing and laying Tor steel of SAIL reinforcement thermo mechanically coated bars of grade Fe 500D for Reinforced Cement Concrete work including TATA Tiscon/ straightening cutting bending, binding and placing in position complete including cost of binding wire for its completion up to all floor levels as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Royality, Malkhana, Toll tax, Sale tax, GST and any other taxes imposed by the Government.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point five) in foundation and plinth above plinth level upto all floor level in cement mortar 1:6 (one cement isto six sand) and curing complete including carriage of material within all leads, lifts and other incidental, or as directed by the Engineer-in-Charge. The rate isincluding Royality, Malkhana, Octroi, GST, Toll Tax, Sales tax and any other taxes imposed by the Government.

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5mm (Thirty five into thirty five into five millimetre) joints mitred and welded by angle iron 35x35x5mm (Thirty five into thirty five into five millimetre) or 35x5mm (Thirty five into five millimetre) flat pieces to the existing T iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including applying a primer coat of red lead paint after pretreatment of the surface and carriage of materials within all leads, lifts and other incidentals. The rate inclusive Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing factory made double steel window side hung (one glazed other wire gauzed) including frame of channel ISLC-75 (seventy five) flapped with mild steel flat 75x4mm (seventy five into four millimeters) and 50x4mm (fifty into four millimeters) in the opening side of channel to make multi-frame and shutters of rolling steel Z-section and T-section and T hinges, handles with closing device and making provision of windows fixing, where required, with 16x3.15mm (sixteen into three point one five millimeters) lugs, 10cm (ten centimeters) long, embedded in cement concrete block 15x10x10cm (fifteen into ten into ten centimeter) size of 1:3:6 (one cement isto three sand isto six graded crushed stone aggregate 20mm (twenty millimeters) nominal size) or with wooden/steel plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required including providing and fixing of handles and tower bolts etcetra and fixing 4mm (four millimeter) thick plass panes with glazing clips and special metal sash putty of approved make for glazed shutters and metal beading with screws etcetera and including fixing of wire gauze using galvanized MS wire gauze of IS gauge designation 85-G (eighty five-G) with wire of diameter 0.56mm (zero point five six millimeters) and for fixing wire mesh with MS flat 20x3mm (twenty into three millimeters) for metal beading and screws complete for wire gauge shutter including applying a priming coat of approved steel primer after pretreatment of the surface as directed by Engineer-in-Charge including carriage of materials within all leads and lifts. Side hung window (one glazed and other wire gauzed).The rate inclusive Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing M.S. grills (TATA/SAIL) of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer Fixed to steel windows by welding .all complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing & Fixing 12mm (Twelve millimetre) thick prelaminated particle board with decorative lamination on both side of Uniply /Greenply ISI marked Gradel Type-II IS No. -12823 marked and above lock rail 5mm (Five millimetre) thick is glass of saint gabain or mode paneling for panelled or panelled and Glazed shutter 40mm Forty millimetre) thick including cost of adhesive of approved quality as per HPPWD specifications and as directed by Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST or any other taxes imposed by the Government.

Providing and fixing 250x16mm (Two hundred fifty into sixteen millimeters) aluminum Matt finished sliding door bolts, make of PILOT/Sheel or equivalent anodized transparent or dyed to required colour and shade with necessary bolts, nuts and screws etcetera complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST or any taxes imposed by the Government.

Providing and fixing 200x10mm (Two hundred into ten millimeters) aluminum Matt finished tower bolts (Barrel type) make of pilot/sheel or equivalent anodized transparent or dyed to required colour and shade with screws etc. complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST or any taxes imposed by the Government.

Providing and fixing 150x10mm (One hundred fifty into ten millimeters) Aluminum Matt finished tower bolts (Barrel type) make of pilot/sheel or equivalent anodized transparent or dyed to required colour and shade with screws etc. complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST or any taxes imposed by the Government.

Providing and fixing 125mm (One hundred twenty five millimeters)fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty millimeters) bright finished brass hard drawn hooks and eyes complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST or any other taxes imposed by the Government. :

Providing and fixing Single socketed pipes 110mm dia (One hundred ten millimetre) on wall face unplasticised Rigid PVC rain water pipes of Supereme/finolex,vectus make conforming to IS : 13592 Type-A, including jointing with seal ring conforming to IS : 5382, leaving 10mm (Ten millimetre) gap for thermal expansion complete with all accesseries as required as per direction of Engineer-in-Charge, including carriage of materials within all leads and lifts complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads and lifts. The rate inclusive of Octroi, Toll tax, GST or any taxes imposed by the Government.

Providing and fixing 110mm dia (One hundred ten millimetre) unplasticised -PVC pipe clamps/Supereme/ Finolex/Vectus make approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm (Fifty into fifty into fifty millimetre) hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (One cement isto four coarse sand) and making good the wall etc. complete with all accesseries as required as per direction of Engineer-in-Charge, including carriage of materials within all leads and lifts complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads and lifts. The rate inclusive of Octroi, Toll tax, GST or any taxes imposed by the Government.

Providing and fixing on wall face 110mm (One hundred ten millimetre) diametre plain shoe unplasticised - PVC (Polyvinyl chloride) moulded fittings/ accessories for unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592 Type A of Finolex/ Relpipe (Reliance)/Supreme including jointing with seal ring conforming to IS : 5382, leaving 10mm (Ten millimetre) gap for thermal expansion complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and applying 6mm (Six millimeter) thick cement plaster to ceiling with cement mortar 1:3 (one cement isto three sand), upto all floor level complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and applying 15mm (Fifteen millimeter) thick cement plaster with cement mortar 1:6 (One cement isto six sand) in single coat on rough side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers or rounded angles in all girth and finished even and smooth as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and applying 15mm (Fifteen millimeter) thick cement plaster with cement mortar 1:6 (One cement isto six sand) in single coat on fair side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers or rounded angles in all girth and finished even and smooth as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Applying priming coat With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm (Zero point nine zero litre per ten square metre) over an under coat of primer applied @ 0.75 ltr/10 sqm (Zero point seven five litre per ten square metre) of approved brand and manufacture and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm (Zero point nine zero litre per ten square metre) over an under coat of primer applied @ 0.80 ltr/10 sqm (Zero point eight zero litre per ten square metre) of approved brand and manufacture and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

White washing with lime to give an even shade new work (three or more coats) and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Distempering with oil bound washable distemper of (Nerolac/Asian/Dulux/Berger) approved brand and manufacture (two or more coats) of required shade on new work over and including water thinnable priming coat with cement primer to give an even shade complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Finishing wall with weather proof emulsion paint of Apex/Vltima paint of (Nerolac/Asian) required shade new work (Two or more coats applied @ 1.67 ltr (One point sixty seven liter)/10sqm (ten square metre)over and including primer coat of exterior primer applied @ 2.20 kg (Two point two zero killograme)/10sqm (Ten square metre) complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Making plinth protection 50mm (Fifty millimetre) thick of cement concrete 1:3:6 (One cement isto three coarse sand isto six graded stone aggregate 20mm (Twenty millimetre) nominal size) over 75mm (Seventy five millmetre) thick bed of dry brick ballast 40mm (Forty millimetre) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying Precast terrazo tiles 22mm (Twenty two millimetre) thick with graded marble chips of size upto 12mm, (Twelve millimetre) laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20mm (Twenty millimetre) thick bed of cement mortar 1:4 (One cement isto four coarse sand) Light shade pigment using white cement complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Royality, Malkhana, Toll tax, Sale tax, GST or any other taxes imposed by the Government.

Providing and laying Precast terrazo tiles 22mm (Twenty two millimetre) thick with graded marble chips of sizes upto 12mm, (Twelve millimetre) in skirting and risers of steps not exceeding 30cm (Thirty centimetre) in height, on 12mm (Twelve millimetre) thick cement plaster 1:3 (One cement isto three coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of : Light shade pigment using white cement The rate is inclusive of Octroi, Royality, Malkhana, Toll tax, Sale tax, GST or any other taxes imposed by the Government.

MAHINDER CHAND CHAUHAN

AKSHAY RANA GOVT CONTRACTOR

SUBHASH CHAND

SURESH KUMAR GULERIA