Bid Documents for Providing, Installing and Testing of L.E.D Street light Fixture with Tubular Pole at Various Locations at Santrampur Nagarpalika Dist: - Mahisagar under 26th January 2024 District level Rastriya Parve 2024-25 2nd Attempt

Name of Work: Bid Documents for Providing ,Installing and Testing of L.E.D Street light Fixture with Tubular

Pole at Various Locations at Santrampur Nagarpalika Dist:- Mahisagar under 26th January 2024 District level

Rastriya Parve 2024-25 2nd Attempt

SCHEDULE - "B1"

Name of Work :- Providing ,Installing and Testing of L.E.D Street light Fixture with Tubular Pole at

Ward No 1 Bhinda talavdi Vistar at Santrampur Nagarpalika

Item No. Item Total Qty. Rate Per Amount

Supplying & erecting Steel tubular pole (Swaged)

confirming to IS - 2713 (Part-II)

Manufacturing process of steel tubular pole should

be as per IS specification. Basic steel tube should be

ISI Marked. Pole should be painted by one coat of

Zinc comet Primer and two coat of Aluminium

/approved paint to be erected on / in existing

Foundation. The length of poles are as below.

(C) 9.0 mtr. Long Swaged Steel tubular pole (i)

Pole as per IS code 410-SP-25 with 300 X 300 X

mm base plate with necessary G.I. J Bolts

(Approximate weight 78 Kg) For burial erection

(ii) Add Extra for M.S. Base plate 300 X 300 X

mm for pole, mounting on surface of foundation on 11.00 982.73 Ea.

GI foundation bolt. with required stiffeners.

(iii) Add Extra for PU base primer and PU Paint on

Providing and erecting street light pole bracket

comprising main B class MS pipe of 4.2 cms.out side

dia complete with suitable sleeve tubing 45 cms long

M.S. Pipe (medium class) Suitable for

mm/80mm/required size of pole top having

2 sufficient fastners for fixing the brackets and having

spread of 1.5mtr length with 110 deg with vertical

plane & suitable welded stays, reducer, and with

check nuts complete painted with one coat of Red

oxide / PU base primer and two coats of Aluminium /

PU paint. paint with following nos of arms.

[B] Double Arm Bracket 1.5 Mtr 10.00 1002.93 Ea.

[C] Triple Arm Bracket 1.5 Mtr 1.00 1331.18 Ea.

Supplying & erecting approved make SMC press

moulded composite FRP. loop-in, loop-out approx.

2mm thick box complete with bakelite connector

strip 4way & hinged doors having locking

arrangements with mounting clamp with nuts, bolts

& washers suitable for erection on pole with cable

cIamps& earth bolt of following size of box.(A)

300mm x 200mm x 100mm [deep]

SANTRAMPUR NAGARPALIKA, SANTRAMPUR

Supplying and erecting LED street light / Flood light

fittings with High power White LEDs wattage of

Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/

lenses, with toughened glass with company

4 mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency >

85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.))(A) Street Light (IP-

65), Surge protection -4KV integral and ,Light must

Providing & erecting approved make street light /

wall mounting junction box compression moulded

from SMC ( thermoset Plastic) vertical sliding cover

5 having locking with square head stud loop in / loop

out in built terminal suitable for four core cable,

waterproof of I.P 54 protected with clamp or built

nut & earth bolt of following size

Supplying and erecting Flexible PVC insulated

multistrand multicore 1.1 kv grade ISI marked

copper wires of following size to be erected as

(e) 1.50 Sq.mm 3 core round PVC sheathed 104.50 46.46 Ea.

Providing & erecting XLPE (IS:7098) (I)-88 ISI

unarmoured cable multistrand Aluminium conductor

for 1.1 KV to be laid on wall with necessary clamps

or in existing trench / pipe at road crossing or floor

of following size of cables.(A-1) 3 1/2 core 35 Sq.

mm ( 16 Sq. mm 1/2 core)

“ B ” class Galvanised iron pipe havingsmooth

finished bore of the pipe on both ends erected nuts

and bolts along the pole / wall shaping the pipe as

per site requirement. Pipe dia as following.(c)

mm dia. 22.00 249.47 Rmt

Pipe type earthing having 150 cms.longand 2.5 cms.

dia. galvanised iron pipe with coupling and buch

buried in specially prepared earth pit complete with

necessary 8 SWG earth wire.

For using salt and charcoal / coke asrequired for

pipe type earthing.

SANTRAMPUR NAGARPALIKA, SANTRAMPUR

Supplying & erecting earth pit ofminimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe- in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having

200-250 Micron galvanising, connection terminal dia

of 12mm with constant ohmic value surrounded by

highly conductive compound with high charge

dissipation suitable for following type of applications

11 with chamber and heavy duty cover. (A)(approved

make OEM has to submit test certificate including

value of earth resistance of installation duly stamped

and signed by agency and officer Incharge has to

ensure the value of earthing resistane mentioned in

test Certificate) & having back filling compound of

(B) Inner chemical (CCM Compound)- Resistivity:-

0.2 ohm / meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form,

Sulphar content:- <2%(C) Back fill Compound :-

Earthing compound should be capable to retain

(a) For Electrical Installation up to 440V in normal

soil Length of pipe - 1 Mtr Back filling compound -

Nos Bag of 15 Kg. 1.00 4591.46 Ea.

Making trench in Hard Murrum / Tar Road of suitable

width of 90 cms or required depth for laying any

12 size of cable or locating the fault all over the run

and back filling the same and making the surface as

(B) If additional machineries like hammer driller or

Providing & laying approved makeDouble walled

corrugated pipes (DWC) of polyethylene(conforming

to IS 14930 II )with necessary connecting

13 accessories of same material at requireddepth for

laying of cable. below ground/ road surface for

enclosing cable and back filling the same to make

ground as per original. (A)50 mm dia

Terminal board of size 5.0 x 127 x

mm.bakeIite sheet with 15 Amp. kitkat pattern

14 porcelain fuse unit with suitable brass studs with

nuts, washers and clamps of size 25mm x 3mm

suitable for pole painted with one coat of red lead

Providing 1:2:4 cement concrete foundation & 70 %

PCC from bottom including excavation for the pole of

size 60 x 60 x 150 cm. Deep in below ground level

with plinth of 45 cm x 45 cm (or 45 cm dia x

cm) high upper ground level with necessary curing

and finishing in approved manner.( for 9 & 10 mtr

Providing and, fixing heavy duty flange type brass

cable gland with rubber ring for PVC insulated

16 armoured cable complete with out going tails,

insulating tape etc for following size of cables.(d)

to 4 core 16 Sq. mm

Providing and, fixing heavy duty flange type brass

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables.(a)

SANTRAMPUR NAGARPALIKA, SANTRAMPUR

Solder less crimping type Aluminium lugs

conforming to IS suitable for cable of following size

18 evenly crimped with high pressure tool & connected

to switchgear terminals with brass/cadmium plated

nut bolts in an approved manner.

Supplying & erecting IP 55 grade following size

section pillar fabricated from joint less M.S. Sheet

with angle iron legs made from jointless M.S. Angle

with cable clamps to be buried in ground to have

appropriate erection to work uniform until erected

with cement concrete foundation and 45 cms high

bricks work finishing with plaster etc. hinged double

19 door internally supported on both side,with internal

and outside looking arrangement with look and keys

in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos.

one is welded and other with nut and bolt for

erecting bakelite sheet. Painting the Section Pillar

inside and out side with three tank powder coated

paint. section pillar roof should be without joint with

water leakage proof & tested as per IP 55 test &

(C) 60 Xby 30ISX2147

section pillar fabricated from

16 Gauge MS Sheet with angle iron legs 45 cm long 1.00 1884.66 Ea.

made from 35 X 35 X 5 mm thick MS angle.

Supplying and erecting HYLAM sheet on existing

angle iron frame.for following thickness (C) 6mm

Supplying & erecting approved make time switch

with single pole airbreak contacts suitable for

V.15/16A.complete with self starting motor driven

21 clock ‘ON’ &’ OFF’ automatic arrangement at any

predetermined time during each 24 hours,With

nickel cadmium rechargeable battery backup erected

Providing and erecting AC-3 duty 3 pole power

contactor with 2 NO & 2 NC aux contacts complete

with 415V/220V operating coil suitable for (L&T,

BCH,T.C., Siemens, C&S make).(C) for 60 / 70 A

rating 1.00 8141.61 Ea.

Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 35 KA. at

415 V. having normal current rating up to 125A.

with Fixed thermal & magnetic release suitable to

work on A.C.supply 50 c/s. with all internal

connections & complete erected in existing

G.M.S. housing. ICS=100% of ICU only Cat III 1.00 8055.76 Ea.

SANTRAMPUR NAGARPALIKA, SANTRAMPUR

Add 18% GST Charge

Add 3%Contingency Charge

SANTRAMPUR NAGARPALIKA, SANTRAMPUR