Construction of RCC Retaining Wall, RCC Road & Other Miscellaneous Civil Works at Palanpur Circle Office

Name of work:- Construction of RCC Retaining wall , RCC Road and other misc Civil Work at circle office Palanpur

Schedule -B (Price Bid)

Item.No Description Qty. Unit Rate Amount

Excavation for foundation up to 1.5 M Depth including sorting out and stacking of useful materials and

disposing of the excavated stuff up to 50 meter lead (B)Dense or Hard soil

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful

2 materials and disposing off the excavated stuff upto 50 Meter lead.(B) Dense or Hard soil 156.00 CMT 168.81

Excavation for foundation for depth from 3.0 m to 5.0 m including sorting out and stacking of useful

2A materials and disposing off the excavated stuff upto 50 Meter lead.(B) Dense or Hard soil 52.00 CMT 181.13

Demolition of brick work and stone masonry including stacking of serviceable materials and disposal

of unserviceable materials with all lead and lift

Demolition including stacking of serviceable materials and disposal of unserviceable materials with all

lead and lift 1. R.C.C. work

Filling available excavated earth ( excluding Rock ) in trnches, plinth, sides of foundations etc. in layers

5 not exceeding 20 cm. in depth consolidating each deposited layer by ramming & watering. 535.00 CMT 135.56

Filling in foundation & plinth with murrum or selected soil in layers of 20cm. Thickness including

watering, ramming and consolidating etc. complete.[Up to 10 Ton]

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing etc.

Dismentalings POP or cement asbestos hard board in ceiling or partition walls, GI or wooden trellies

8 work including trellies work including frames ,stacking of serviceable materilas and disposal of 32.00 SMT 29.30

unserviceable materials with all lead and lift.

Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters etc. stacking of serviceable

9 materilas and disposal of unserviceable materials with all lead and lift.(i) G.I.sheet roofing. 230.00 SMT 48.63

Dismentalling sanitary fittings like wash basin, W.C. pan, indian and European type flushing tank etc.

includingstacking the materials with all lead and lift.

Dismentalling tiles or stone floors laid in mortar including stacking of serviceable materials and

disposal of unserviceable materials with all lead and lift.

Removing and scraping of old deteriorated plaster of any thickness fromm wall / R.C.C member

12 including stacking of serviceable material anddisposal of unserviceable from site of work with all lead 200.00 SMT 19.69

Scraping oil paint from steel and other metal surface and making the surface even (with Hand

Providing & laying Cement concrete 1:4:8 ( 1 cement :4Coarse sand : 8 hand broken stone aggregate

14 40mm.nominal size ) and curing complete excluding cost of form work in (A) Foundation & Plinth 161.00 CMT 2627.15

Providing and laying controlled cement concrete M.200 and curing complete excluding the

15 cost of formwork and reinforcement for reinforced concrete work in (A) Foundations, 53.00 CMT 3904.28

footings, Base of columns and Mass concrete

Providing and laying Controlled cement concrete M.200 and curing complete excluding the

cost of formwork and reinforcement for reinforced concrete work in (B) Walls, from top of

foundation level upto floor two level top of foundation level upto floor two level

Providing and laying controlled cement concrete M.200 and curing complete excluding the

17 cost of formwork and reinforcement for reinforced concrete work in (D) Columns, Pillars 9.00 CMT 4528.83

posts and struts upto floor two level.

Providing and laying controlled cement concrete M.200 and curing complete excluding the

cost of formwork and reinforcement for reinforced concrete work in (C)

Slabs,landing,shelves,Balconies Lintels, Beams, Girders and Cantilever upto floor two level.

Providing & Laying C.C. M-20 or for plain or R.C.C. work for Road pavement, using 12mm. to 20mm.

Size black trap machine crushed metal including necessary centering for all sides as required , mixing

the concrete in mixer machine, ramming with Vibrator, including keeping the joints between road

20 panels & finishing the Honeycombed surface if any, immediate finishing of Top layer of road with 65.00 CMT 4700.28

trowel & spunch to create anti skid hard surface with curing etc.. complete as per drawing &

specification, & as directed by E.I.C. with supply of cement by the contractor. ( REINFORCEMENT IF

ANY WILL BE PAID SEPERATELY.)

Providing and laying cement concrete work M200 and finishing and curing complete excluding cost of

21 formwork and reinforcement for reinforced concrete work in (B) Slabs & lintels &copings 18.00 CMT 4325.71

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates

20 mm nominal size) for reinforced concrete Chhajjas not exceeding 10cm. thickness upto floor two

22 level including finishing the exposed surfaces with cement mortar 1:3 (1-cement, 3 Fine sand) to give 8.00 CMT 6804.30

a smooth and even surface centering and formwork and curing complete excluding cost of

Item.No Description Qty. Unit Rate Amount

Compaction and finishing of cement concrete road by trimix process providing extra labour charges

for the trimix vacume dewatering service process on cement concrete road surface by using vacum

dewatering pump floater surface vibrator including making groves and rough finish to surface

including levelling etc complete as directed.

Brick work using common burnt clay building bricks having crushing strength not less than 35 Kg./

24 sq.cm. in foundation & plinth in cement mortar 1:6 ( 1 cement :+6 Fine sand ) (B) Conventional 35.00 CMT 4172.60

Brick work using common burnt clay building bricks having crushing strength not less than 35 Kg./

25 sq.cm. in super structure above plinth level (upto floor two level) in cement mortar 1:6 ( 1 cement : 6 87.00 CMT 4451.53

Fine sand ) (B) Conventional

20mm. Thick sand faced cement plaster (Tipani with Gutka) on ceiling, walls up to full height of

structure above ground level consisting of 12mm.tThick backing coat of C.M. 1:3 ( 1 cement : 3 sand )

and 8 mm. thick finishing coat of C.M. 1:1 ( ! Cement :1 sand) etc.. Complete.(for all floors)

Providing 20mm. Thick double coat mala cement plaster on interior brick / concrate work for

plastering comprising of base coat of 12mm thick cement plaster in (i) Cement mortar 1:4 ( 1 cement

27 :4 coarse sand)in rough finishing and 8mm thick top coat of cement mortar 1:2 (1 cement :2 coarse 160.00 SMT 281.14

sand) finished with trovel incl. scafolding, curing etc complete. up to floo two level.

Removing dry or oil bound distemper by a washing and scraping and sand papering the wall surface

smooth including necessary repairs to scratches complete.

Wall painting two coats with weather proof acralic emulsion APEX type paint of approved brand &

manufacture and of required shade on exterior wall surface to give an even shade over and including

29 a primery coat with alkaly resistance primer of approved brand after throughly brushing surface to 1210.00 SMT 73.10

remove all dirt and remains of loose powdered materials etc comp. for all height.

Applying two coats of Birla Or Asian acrylic lapi (putty) & two coats of primer approved brand and

30 manufacture on new wall surface to give an even shade including throughly brushing the surface free 440.00 SMT 40.19

from mortar dropping and other foreign matter and sand papered smooth

Distempering (two coats) with emulsion paint (tractor emulsion type) of approved brand &

manufacturer & of required shade on wall surfaces to give an even shade, over & including a

31 priming coat with appropeate primer of approved brand & manufacture after throughly 440.00 SMT 82.62

brushing the surface free from mortar droping & other foreign matter & also including

preparing the surface even & sand papered smooth.

Providing formwork of ordinary timber planking so as to give a rough finish including centering

shuttering strutting and propping etc. height of propping and centering below supporting floor to

32 ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete 42.00 SMT 205.07

work in. (H) (1) Sides and soffits of Beams Beam Haunchings cantilevers Girders Bressumers and

Lintels not exceeding 1 M. in Depth

Providing TMT bars FE 500D reinforcement of approved make for R.C.C. works including bendings,

binding & placing in position complete (upto floor two level)

Steel work welded in built up sections, framed work including cutting, hoisting, fixing in position and

applying a priming coat of red lead paint :- (A) In beams and joints channels angles, tees, flats with

connecting cleats as in main and cross beams, hip and jack rafters, purlins connected to common

rafters and the like.

Providing and fixing chain link fencing with M.S. Angle posts 50 mm. X 50 mm.X 6 mm. And oil painting

3 coats fixed at 2.00 mt. G.I. chainlink Jali (75X75 mm, 10SWG) strained and fixed to posts with MS flat

50 x 6 mm with nut & bolts, including fixing posts in ground with 0.5m x 0.5m block in C.C.1:3:6

etc.completed as per drawing & as directed by E.I.C. (ALL THESE MATERIALS LIKE M.S. FLAT,

CHAINLINK FENCING, M.S. ANGLES, BOLTS, NUTS, WILL HAVE TO BE SUPPLIED BY THE CONTRACTOR.)

Providing fitting & fixing fully glazed/ partly glazed double leaf anodised aluminium entrance

door using extruded section fabricated by standard manufactures with framing 10.15cm

x4.45cm rectangular section with minimum Thickness 1.95mm & door shutter made from

10.15 cm x 4.45cm aluminium top / bottom section,Lock rail mimimum 15.0cmx4.45cm &

vertical section 4.70 x 4.45 cm size with minimum Thickness 1.95mm using 5.0mm thick

36 "Triveni"or HB4 smoke glass with glazing deep rubber gasket with locking 8.00 SMT 11150.00

arrangement(Godrej type) with all fixtures & fastenings of anodised section with

aluminium bedding floor spring mounted door closer with all labours & materials etc.

Complete as per drawing and as directed by E.I.C..Item also includes powder coating to

alluminium sections of approved colour / shade incl. all materials,labour,tools & tackles etc.

Providing and fixing window having extruded alluminum colour anodized section frame main

outer size 63.5 x 38.10 x 1.95mm (of Jindal Section no4605,@ wt 1.094 Kg/Rmt), horizantal

two track member size 61.85mm x 31.75 mm x 1.20mm (of Jindal section no 8687 @ wt of

0.695kg/Rmt), vertical memberof size 61.85mm x 31.75mm x 1.30mm (of jindal section no

8758 @ wt of 0.659kg/mt) with sliding shutter of horizantal member size 40mm x 18mm x

37 1.29mm (of jindal section no 8949 @ wt of 0.456kg/Rmt), vertical member of size 40mm x 15.50 SMT 1696.73

18mm x 1.29mm (of jindal section of 8947 @ wt of 0.456kg/mt, section 8948 @ wt of

0.457kg/mt) with 5mm thick transparent bronze colour tinted float glass with powder coated

alluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per

details etc complete (For two track window).

Item.No Description Qty. Unit Rate Amount

Providing and laying 24" x24" Vetrified 8 mm thick tiles in flooring, skirting etc. laid on a Bed of

mm. Thick cement mortar 1:6 (1 cement : 6 coarse sand) and jointed with colour & white cement

slurry including finished with flush pointing and cleaning the surface etc complete. (Double Charge &

Providing and laying Black granite for entrance steps,water counter etc. flooring over 20 mm.

39 (average) base of cement mortar 1:6 (1 cement : 6 coarse sand) or L.M. 1:1.5 and jointed with grey 6.00 SMT 4454.55

cement slurry including rubbing and polishing complete.

Labour charges for making moulding edge to Black granite incl. all tools,tackles etc. complete as

Providing and fixing to wall ceiling and floor 10.0 kg. F/cm2 working pressure polythylene pipes of the

following outside dia. special density, complete with special flange compression type fittings, wall

41 clips etc. including making good the wall ceiling and floor. (For rain water pipe) 45.00 RMT 335.69

A) 110mm. dia. O.D., P.V.C. Pipe.

Providing & Fixing M.S. Fan clamps type 1 of 16mm. Dia. M.S. bar bent to shape with hooked ends to

42 R.C.C. slabs during laying including painting the exposed portions of loops, all as per standard design 2.00 Nos 133.80

Providing and applying anti termite treatment, as per IS 6313 (part II & part III 2001) for building works

in pre construction & post construction stages, using chemicals conforming to relevant IS in water

emulsion and effective when aopplied uniformly over the area to treated. The chemical to be used is

chloro-pyriphos 20% EC or its equivalent. The treatment is to be carried out as per the procedure

mentioned below and treated plinth surface area is to be taken for measurement.

Providing & fixing china mosaic tiles flooring as water proofing treatment including (a )

Applying cement slurry of cement admixed with water proofing compound after cleaning the

surface properly. (b) Cracks in slab shall be open in ' V ' groove & all loose materials shall be

removed & crack filling shall be done with special & approved type of expanding crack fillet

material . ( c ) Depressions in slab if any be filled up with C.C.(1:2:4 ) I.P.S.flooring. ( d ) P / L

20 mm thick plaster layer in C.M. ( 1:4 ) with cement admixed with water proofing compound

44 including rounding of junction of walls and slab by making cement vata. ( e ) Finishing the 52.00 SMT 771.98

surface with china mosaic tiles (pieces ) flooring incl.fixing the same in cement mortar (1:2)

setting with ready made tile adhesive as recommended by manufacturer’s including fillings of

joints mixed with pigmented white cement slurry of matching shade & finally finishing the

surface with trowel with white cement slurry etc., complete ( f ) After finishing, the whole

terrace shall be flooded with water to check the performence of work.

Painting two coats (including priming coat) on new steel and other metal surfaces with enamel paint,

45 brushing interior to give an even shade including cleaning the surface of all dirt, dust and othr foreign 116.00 SMT 126.86

Providing & applying Dr.fixit( pidilite)LW+ OR equivalent, In RCC Work using 200ml per bag as directed

& instructed by E.I.C

16.00 Litres 78.00

Providing & Fixing hinged type 40mm. square. M.S. Pipe gate as per drawing & design incl.erection of

gate with necessary hinges supported to vertical girders, locking arrangement by providing & fixing

47 aldrop on both sides, with 3 coats of oil painting of approved shade & make with one coat of red oxide 25.00 SMT 2394.00

primer etc., complete as directed by E.I.C. (COST DOES NOT INCLUDE THE COST OF COLUMNS,

STEEL/JOISTS, CONCRETE, MASONRY ETC.)

P/F corrugated colour coated GI sheet roofing of Jindal or Equivalent make having width of 1050mm (

effective 1000mm) and fixed with colour coated galvenized iron 'J' or 'L' hooks, bolts & nuts 8mm

diameter , with bitumen and G. I. Limpet washers filled with white lead complete excluding the cost

of Purlins , Rafters and trusses .(0.60 mm. Thick Sheet.)

Providing & fixing of box rimless pattern wall mounted cantilever type white/coloured vitreous china

European water closet including flushing cistern with C.P bolts, nuts, CI chair (painted with two coats

of enamel paint over a coat of primer) or other hanging arrangements, bakelite / poly propylene soft

closing seat cover with C.P. hinges & rubber buffers, connector pipe from P/S trap to drainage pipe,

49 brided hose pipe complete with all accessories. Including cutting & making good the walls & floors 4.00 Nos 10895.00

wherever required. The scope include the items as per specifications and product details as under:

EWC-P:- WALL MOUNTED CERA CAT NO: S1043168 P.25 (CHANTER with slim soft close seat cover)+

Cistern Half Frame Cat No. B1130102 (CHEVRON) P. 32 + Knob Cat No B1120105 P. 32 OR EQ

Providing & Fixing white / coloured porcelain flat back wall type URINAL PAN of CERA make having

size 350 * 340 *615 mm of approved quality & make including waste coupling (Full Threded) bends &

necessary outlet of 25mm.dia. G.I. Pipe connections including providing Bottle Tarp, brass stop cock

(pillar cock type), PVC connection,spreader & spreader pipes,brackets etc., completed as directed by

E.I.C. Cera Cat No : S4020113, (CIVIC Urinal)+ WASTE COUPLING: CERA ALD-F8050101 or EQ PAGE

Providing & fixing of first quality white/coloured vitereous china table top type wash basin as per

product detail, including 300 mm Bottale Trap, 32mm CP brass full thred waste coupling as per

product detail, PVC pipe for waste connection, 12mm dia & 450 mm length nominal bore heavy rating

CP brass inlet connection with unions at end for connection of angular valve to basin as per

product detail complete including fixing wash basin with counter top by approved type poly sulphide

sealent, and making good the walls where required. The scope includes the items as per specifications

and product details as per under. Table top wash basin. CERA CAT NO: Cat. No. S2020155 (CALBURT-

Snow White) page no 37, Bottle Trap Cera Cat No. F8060301 P. 126, Connection Pipe Cera Cat No:

F8070403, P.126, WASTE COUPLING: CERA ALD-F8050101 Page no. 127 OR EQU.

Item.No Description Qty. Unit Rate Amount

Providing & laying coloured glazed tiles 6mm. Thick in flooring, treads of steps & landing laid on a bed

52 of 12mm. Thick cement mortar (1:3) (1 cement : 3 coarse sand finished with flush pointing in white 20.00 SMT 945.95

Providing and fixing FRP frame size 100x50 mm and 28mm thick FRP depress panel shutter having

extra reinforcement on sides & edges in Gel coat finish. The core of the shutter & frame is to be filed

up with injected fire retardant grade polyurethene foam done in situ alongwith embedded wooden

53 pieces for stiffening & also taking hinges & fintures. The whole FRP frame & shutter is to be water 8.00 SMT 2354.22

proof weather proof, termite proof & resistance to mild acid/alkali. Rates are to be inclusive of S.S

hinges with necessary screws & alluminium fixtures & fastenings & fastener sleeve.

Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings and clamps including stacking

the materials with all lead and lift ( for any dia, of pipe)

Providing & Fixing curtains for window with S.S. curtain rod and bracket/clamp /ring with complite

Accessories incl powder coating of approved shade & make. for fixing the same in line & level incl.

cm. boarder at top / bottom and belt with velcro at middle portion of curtain & canvas patti at top of

curtain incl.stiching charges for curtain and labour charges for fixing brackets/clamps & Power track

55 channel/curtain rod etc.complete as directed by E.I.C. NOTES : (1) The basic rate of curtain cloth 5.00 SMT 544.50

considered as Rs. 90 - 00 per Rmt length & 1.20 mt. to 1.35 mt. in width required as per width of

window. The actual payment will be made on pro-rata basis depending on cost of cloth actually

selected.(2) Measurements will be paid in sq. mt.for the area of window opening.

Providing & fixing C.P. brass pillar tap with all nuts, washer and brass flange etc complete as per

specifications and product detail as under: Cera Cat No : F1019101 or EQ

57 Providing & fixing C.P. brass waste for wash basin or sink (B) 40mm. Dia. 4.00 Nos 88.94

58 Providing & fixing brass screw down stop tap (A) 15mm. Dia. 6.00 Nos 203.79

Providing & Fixing Toilet hand spray with completed set with pipe and handle & rest socket. Fitted as

per instruction of EIC

Providing & Fixing 600X450mm. Bevelled edge mirror fixed to wooden plug with C.P. Brass screws.

Providing & Fixing PVC Gully trap with C.I. grating brick masonary chamber & water tight C.I. cover

61 with frame of 300mm X 300mm.size inside with standard weight. (i) Square mouth trap (B) 6.00 Nos 1234.57

150mm. X 110mm. size P or R type.

Providing & fixing PVC SWR Nahani trap IS 14735 for drain - 100 mm diameter with jali of the following

62 nominal diameter of self cleanising design with C.I. screw down or hinged grating including cost of 4.00 Nos 726.00

cutting & making good the walls and floor ( 100mm. Inlet and 50mm. Outlet)

Providing & Fixing chromium plated brass half turn flush cock of approved quality including fixing in

pipeline etc.. Complete……… 25MM. Dia.

Providing. Laying and jointing in true line & level 15 mm dia. U.P.V.C. pipe (Sch 40) for cold water in

ground OR on wall including fittings of make PRINCE/SUPREME/ASTRAL/FINOLEX or equivalent as

approved by EIC. pipe shall be fixed on the wall with the help of clamp at every two meter C/C or shall

be concelled as directed including necessary fittings etc and fixing the same with adhesive solvent

including testing of pipe & joints including cost of all materials etc complete.

Providing. Laying and jointing in true line & level 25 mm dia. U.P.V.C. pipe (Sch 40) for cold water in

ground OR on wall including fittings of make PRINCE/SUPREME/ASTRAL/FINOLEX or equivalent as

approved by EIC. pipe shall be fixed on the wall with the help of clamp at every two meter C/C or shall

be concelled as directed including necessary fittings etc and fixing the same with adhesive solvent

including testing of pipe & joints including cost of all materials etc complete.

Providing & Fixing & functioning of PVC ball Valve as approved make as directed by EIC A.(15 mm dia.

Providing & Fixing & functioning of PVC ball Valve as approved make as directed by EIC A.(25 mm dia.

Providing & fixing approved and tested quality bib cock with all fittings complete as per specifications

and product detail as under: Cera Cat No : F1020151 or EQ

Providing, Erecting & Fixing ready made double coated sintex P.V.C. (ISI) or equivalent ISI water

storage tank of required capacity each with cover including providing & fixing one 20mm.dia. float

69 valve ball‑cock , one 20mm dia. G.I. Waste pipe with plug, one 25mm dia. G.I. over flow pipe of length 1000.00 Litres 3.91

up to 0.30mt. including making all connection for inlet/outlet supply with necessary fittings etc.

complete on terrace. (A) 1000 Liter capacity

Providing & Fixing C.P. Brass towel rail complete with C.P. brass brackets fixed to wooden plugs with

C.P. brass screws.

71 Providing unskilled labour for movment of obstracted material during Renovation works. 30.00 Job 487.00

72 Labour charges - Plumber (Fitter) & Mistry 10.00 Job 766.00

Cutting out cracks of roof terrace to V- section , cleaning out, wetting , grouting with cement and sand

slurry 1:3 (1-cement 3-sand ) (upto 10 ton)

74 Cleaning of septick tank 1.00 Job 1500.00

Providing and fixing pre-cast Rubber Dye/steel Dye inter locking concrete block 60mm thick with

grade of concrete M300 pnumatic compressed / vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling and filling the joint with sand in

proper line and level as per guidlines of IRC : SP 63-2018 etc.

Item.No Description Qty. Unit Rate Amount

Providing & fixing precast concrete kerb stone of grey cement based concrete block having size 30 cm

length *30 cm height *15 cm thick of M-250 grade concrete as per approved design & including

excavation for fixing in proper line and level, filling the joints with C.M. 1 : 3 ( 1 Cement : 3 fine sand )

etc complete as directed

Constructing brick masonary chamber for underground C.I Inspection chamber and bends with bricks

having crushing stregth no less then 35 kg/cm2 in c:m 1 :5 C.I. cover with frame (light duty) 445 mm x

610 mm internal dimensions total weight of cover with frame to be not less than 38 kg (wt. or cover

77 23 kg. and wt of frame 15 kg) R.C.C.top slab with 1: 2 : 4 mix (1 Cement :2 coarese sand : 4 grade 5.00 Nos 2903.89

stone aggregate 20 mm size) foundation concrete 1 : 5 : 10 inside plaster 15 mm thick with cement

mortar 1 : 3 finished smooth with a floating coat of neat cement on walls and bed concerete etc.

Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not less than 35Kg.

Approved make Power Saving 50 Watt Ceiling Fan with Condenser 230 Volt A.C. 50 Cys. 1200 mm

79 sweep complete having 3 blades with aluminium blades with, canopy & 30 core flexible wire with 8.00 Nos 1929.00

earthing. (Havells, Orient, Crompton, Anchor, Bajaj)

Supplying & erecting approved make low noise decorative exhaust fan having size 250mm with

RPM with square frame ABS body with inbuilt lowers & square frame.Cat-II

Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having Tegular edge &

15 mm Thick Densified edges on the Tile Periphery for Extra Strength The Light weight calcium silicate

ceiling tiles shall have , light reflection 85% non-combustible as per B.S. 476 part IV, 100% humidity

resistance and also having thermal conductivity0.043° w/m KC.for the best thermal Insulation. The

Light weight calcium Silicate tile shall be of approved texture Fine fissured/ Spintone/Cosmos having

NRC value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of size 595 X 595 mm to be laid

on true horizontal level suspended inter locking metal grid of hot dipped galvanized steel sections

(galvanizing @120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at

joints to get required length and size of 24X38mm made from 0.30 mm thick (minimum) sheet,

1200mm centre to centre, and cross ‘T’ of size 24X28mm made out of 0.33mm (Minimum) sheet

spaced 1200mm along spaced between main ‘T’ at 600mm centre to centre to form agrid of

1200X600mm and secondary cross ’T’ of length 600mm and size 24x28mm made of 0.30 mm thick

(Minimum) sheet to be interlocked at middle of the 1200X600mm panel to form grid of size

600X600mm resting on periphery walls/partitions on a perimeter wall angle pre-coated steel of size

(24X24X3000mm made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm

centre to centre with 25mm long dry wall screws @ 230mm interval and laying 15mm thick Densified

81 edges light weight calcium silicate ceiling tiles of approved texture (Fine Fissured/Cosmos/Spintone) 40.00 SMT 1657.57

in the grid including, cutting /making opening for services like diffusers, grills, light fittings, fixtures,

smoke detectors etc., wherever required, Main ‘T’ runners to be suspended from ceiling using G.I.

slotted cleats of size 25X35X1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners,

4mm G.I. adjustable rods with galvanized steel level clips of size 85X30X0.8mm, spaced at 1200mm

centre to centre long main ‘T’ bottom exposed with 24mm of all T-sections shall be pre-painted with

polyester baked paint, for all heights, as per specifications, drawings and as directed by engineer- in-

charge.Note:- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction

shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm. The calcium

silicate ceiling tiles shall have NRC. Value of 0.50 (Minimum) for Fine fissured/Spintone/Cosmos and

0.75 NRC for Globe, light reflection 85% non- combustible as per B.S. 476 part IV, 100% humidity

resistance and also having thermal conductivity. 0.043° w/m KC.for the best thermal Insulation

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or

Polycarbonate optics with company mark/name 120 to 300 V, Power Factor more than 0.9, THD <

%, CCT 4000 K to 6500K, Uniformity ratio >0.7, Luminaire efficiency> 85 lumens/watt, LED driver

efficiency > 85 % CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED used

for luminaire. (Each fitting required LM-79 & LM-80 Certificates)(B) LED Panel Light with provision for

Plane front frame with translucent cover fixed to housing complete.IP20(iii) 12-15 watts, 6" x 6",

Surge-2 KV ii) Cat-III

Item.No Description Qty. Unit Rate Amount

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

83 Luminaire efficacy> 85 lumens/watt , 6.00 Nos 1777.00

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the

ranges shown.)(B) LED Panel Light with provision for Plane front frame with translucent cover fixed to

housing complete.IP20 (vi) 36 watts, 24" x 24", Surge- 2KV Cat III

Point wiring for light with 2-1.0 sqmm & earthwire of 1.0 sqmm (green) both are of ISI marke

approved make PVC insulated multistrand copper wires, in existing pipe duly erected complete with

6A Modular type switch/bell push & accessories of approved make and earth continuty of following

type, erected on PVC/Metallic box covered with appropriate front plate modules erected concealed in

wall/ceiling. (Loop point include) (a) Single mounting base-frame & Textured/Metallic front plates.

Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of .ISI marked

KV Grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected

concealed in / flushed on wall/ceiling complete with 6A Modular type switch and hum free EME four

or more step type electronic fan regulator with separately mounted and accessories with earth

continuity of following type erected on PVC / Metallic box, single mounting base frame covered with

textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected. with necessary

ceiling rose / H.D.Connector as directed.(a) with medium class Rigid PVC pipe and accessories Cat. III

86 Providing & Fixing 20/10/06 SP MCB Haggger make 10.00 Nos 200.00

P&F Carpet Lawn Levelling and planting the same at required place and maintaining the same till well

established by regular watering,weeding,cleaning, lawn moving four times in a month, Applying

Fertilizer,Pesticides & all other garden related work should be done ( about 60 days ). Company will

supply only water free of cost.

Providing, planting & Development of SELECTED best quality of green / red mehndi, golden Durant

hedge on both side of road including digging for excavation spreading.

Providing plantation & development of plants, small trees of plants of selected & approval name

quality, size and growth in good condition. The work including cost of plants, materials, digging pit in

the soil of size 0.60 x 0.60 x 0.60 mtr. Soil for planting trees, mixing of manure & refilling the pit with

good earth, watering as and when required. Providing pesticides / fertilizer with twelve months of

89 maintenance, replacement & replacing of dead plants during maintenance cleaning, removing, 45.00 Nos 940.00

labours, tools & tackles transportation, loading, unloading etc., complete ad directed by the E.I.C., but

for following plants. Spethodia, Bottle Palm, Sampion Palm, Terminalia Etc Bag Size Of (21 x 21) &

maintaining till well established OR as approved by EIC.

P/F Mechanical double face movable unit of 900mm deep including all materials by using 22 SWG

mm thick C.R.C.A. steel sheet, 30mm solid round guide channel press fit in to cold formed 'U' channel

made from 14G Thick material, 4 nos. of C.I. wheels 128mm dia x 35mm, traction chain of 1/2" size,

Anti tilt arrangement on rear side of unit, driving wheel of 3 inseratble arms with central hub, 10 lever

central locking arrangement, Individual unit lock system & stoppers, Indexing arrangement made of

acrylic sheet for numbering and naming.

P/F Mechanical single face mechanical unit of 450mm deep including all materials by using 22 SWG

mm thick C.R.C.A. steel sheet, 30mm solid round guide channel press fit in to cold formed 'U' channel

made from 14G Thick material, 4 nos. of C.I. wheels 128mm dia x 35mm, traction chain of 1/2" size,

91 Anti tilt arrangement on rear side of unit, driving wheel of 3 inseratble arms with central hub, 10 lever 8.00 SMT 13268.20

central locking arrangement, Individual unit lock system & stoppers, Indexing arrangement made of

acrylic sheet for numbering and naming.

Powder coating on metal sheet for anti-rust treatment & finishing.

Item.No Description Qty. Unit Rate Amount

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with

92 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of 270.00 RMT 82.00

following size (a) with medium class Rigid PVC pipe and accessoriesb) 2 wire 2.5 sq. mm

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of

Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminium housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity

ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-

93 79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED 40.00 Nos 2058.00

fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (a)

LED Bollard fittings of minimum height 400 mm & dia.100mm having polycarbonate clear/milky

diffuser mounted on 3mm thick aluminium finished powder coated pipe with base plate 160x160mm

with erection by M8x75mm fastner with required RCC foundation.IP65 for 9 to 20 watt ,surge-4kv cat-

Providing, Supply, fabrication, and installation of Artistic Sculpture, Font, Wall Art of Modular

wire‑mesh basket (gabion) system filled with decorative rock or stone aggregate, forming an

architectural,landscape feature up to [specify height,length] m. Wire baskets manufactured

from heavy galvanised steel (or PVC‑coated steel) in accordance with specification; placed,

filled, compacted and firmly fixed to prepared foundation or sub‑base. Feature includes.

stone fill selected for size and colour, internal ties, corner,edge stiffeners, drainage provision,

94 and finish to top of fill. Suitable for erosion control & structural walling, as well as aesthetic 3.75 CMT 3076.00

landscape screening and seating elements. Flexible, permeable, robust construction that

blends natural stone texture with engineered basket form. Construction to conform to BS,EN

(or relevant local) standards for gabion baskets.All works to be carried out as per approved

drawings and under the direction of the Engineer-in-Charge.

Providing and erecting decorative wall bracket fittings complete with LED lamp and rust free

fittings components mounted in chrome finish housing with holder ,clear/opaque glass

diffuser complete erected with lead wires with minimum 15 wattage capacity as per

instruction engineer incharge/architect/authority .cat-III

Providing & fixing sliding gate of 40mm. Dia Mild Steel Pipe `B' class all round and 20mm.

dia. Mild Steel Pipe at 200mm. C/C and 12mm. Mild Steel Square bars at 200mm.C/C

alternatively (i.e. ONE BETWEEN TWO PIPES)vertically welded to 40mm. dia. pipe frame as

per drawing and design with necessary brackets, hold fasts, locking arrangement on

top & aldrop on both the sides including base rail for sliding the gate having ball bearing

rollers & guide track of 50X6mm. M.S. Flat with hold fast, fabrication of side supports

including fixing . ‘letters on front side etc., complete with three coats of approved oil

painting & one coat of red oxide primer as directed by E.I.C. (THE COST DOES NOT INCLUDE

THE COST OF REINFORCEMENT, COLUMN SUPPORT, JOISTS, CONCRETE, MASONRY WORK.)

Providing formwork of ordinary timber planking so as to give a rough finish including

centering shuttering strutting and propping etc. height of propping and centering below

supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced

concrete and plain concrete work in. (C) Vertical surface such as walls (any thickness)

partitions and the like including attached buttresses & string course & the like.

Providing formwork of ordinary timber planking so as to give a rough finish including

centering shuttering strutting and propping etc. Height of propping and centering below

98 supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced 67.00 SMT 178.61

concrete and plain concrete work in. (A) Foundations Footings Bases of Columns etc. and

Providing formwork of ordinary timber planking so as to give a rough finish including

centering shuttering strutting and propping etc. height of propping and centering below

99 supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced 95.00 SMT 315.87

concrete and plain concrete work in. (G) Columns PillarsPosts and struts. (1) Square

Rectangular Polygonal in plan.

Item.No Description Qty. Unit Rate Amount

Providing formwork of ordinary timber planking so as to give a rough finish including

centering shuttering strutting and propping etc. height of propping and centering below

supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced

concrete and plain concrete work in. (H) (1) Sides and soffits of Beams Beam Haunchings

cantilevers Girders Bressumers and Lintels not exceeding 1 M. in Depth.

Providing formwork of ordinary timber planking so as to give a rough finish including

centering shuttering strutting and propping etc. Height of propping and centering below

101 supporting floor to ceiling not exceeding 4M. and removal of the same for in situ reinforced 60.00 SMT 264.6

concrete and plain concrete work in. (B) Flat surfaces such as soffits of supspened floors slabs

Landings and the like. (1) Floors etc. upto 200 mm in thickness.

A ESTIMATED COST - RS =

B Bidder’s Offer (+ / -) in % ------------- [B]

C Grand Total C = A +/- (A*B)]

C Grand Total C = A +/- (A*B)]

D Add 1% Welfare cess on C

E Total including Welfare Cess ----- D = C + D -------------------------------

F Goods & Service Tax F = E x GST% i.e. 18%as applicable on the date of tender in amount Rs.

G Grand Total including Welfare Cess & GST ---- G = E + F ----------

G Grand Total including Welfare Cess & GST ---- G = E + F ----------

Final Offer (in Rs.)

Final Offer (Rs. In Words)

We have read and clearly understood the terms, conditions, Schedule ‘B’ and Technical specifications put up by UGVCL on WEB site.

I/We hereby accept all the conditions and specifications of this tender document, and accordingly,

I/We am/are willing to carry out the work at quated rate as above.

SIGNATURE OF CONTRACTOR Chief Engineer (Operation)

(With rubber stamp/seal of the company) UGVCL R.O. MEHSANA