Repair, renovation & construction of new toilet blocks for Male and female and other miscellaneous work at the department of Physical Education.

m Item Description Unit Qty Rate Amount

Providing and laying cement concrete work 1:2:4 (1- Cement

: 2- Coarse sand : 4- graded stone aggregates 20 mm nominal

size) and curing complete excluding cost of formwork and

1 reinforcement for reinforced concrete worin (B) Slabs, CUM 35.00 3925.43

landing, shelves, Balconis , Lintels, Beams, Girders and

Cantilever , Columns, Pillars posts and struts upto floor two

level. upto floor two level.

Providing TMT Bar FE 500D reinforcement for R.C.C. work

2 including bending, binding and placing in position complete KG. 450.00 76.21

upto floor two level

Half brick masonry in common brunt clay building bricks

having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in foundation

and plinth (B) Conventional

Providing and laying Ceramic tiles 6mm thick in flooring

treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1- cement : 3-coarse sand ) finishing with

flush pointing in white cement.

: Providing and laying coloured glazed tiles of the size

mm x 200 mm x 8 mm / 300 mm x 450 mm x 8 mm in skirting,

risers of steps and dedo on 10 mm. thick cement plaster 1:3 (1

cement : 3 coarse sand) & jointed with white cement slurry.

Providing 20mm thick cement plaster in single coat on single

or half brick walls for interior plastering upto floor two level

and finished even and smooth in (ii) Cement mortar 1:4 (1-

cement :4-sand)

Demolition and disposal of unserviceable materials with all

lead and lift.(i) cement concrete.

Demolition of Brick work and stone masonry including

8 stacking of serviceable materilas and disposal of unserviceable CUM 37.00 536.08

materials with all lead and lift.(ii) In Cement Mortar.

Dismentaling tiled of stone floors laid in mortar including

9 stacking of serviceable materilas and disposal of unserviceable SQM 168.00 46.77

materials with all lead and lift.

Removing and scraping of old deteriorated plaster of any

thickness fromm wall / R.C.C member including stacking of

serviceable material and disposal of unserviceable from site of

work with all lead and lift

Providing and laying polished machinecut 18 mm thick

Galaxy Black Granite/ Lakha Red Granite slab with mirror

polish stone in require size and shape of approved quality &

size for flushed with wall plaster along with 10mm groove

11 separating skirting and wall plaster, also in staircase , dedo, SQM 78 2949.94

jambs, sills ,platform, pillars laid on 20 mm thick cement

mortar 1:3 (1 cement : 3 fine sand) and jointed with colour

cement slury and colour pigments including edging, rubbing

and polishing etc.all complete as per the architectural details

Providing, cutting and fixing the double side polished 20mm

thick Kota Stone for Partition /shelf etc. with sides/edge full

12 moulding in semi round shape and polish around and fixing SQM 12.50 1152.41

the same with all necessary civil work,curing, cleaning the site

watering etc. complete for all heights as per instruction.

Replacing existing rusted/broken flyproof jalee by providing

and fixing S.S. flyproof jalee 304 grade tested of requried

mesh X 28guage and of approved quality including depositing

the rusted jalee in C.D. store fixing deficite wooden battens as

per existing including using one's own khila, nails N.F. screws

and removing and refixing the existing shutter where required

etc. complete for all heights as per instructions. (N.B. :- Wood

other than battens shall be measured & paid separately)

Labour for carefully removing and refixing existing steel

welded mesh jali/ m.s. grill/ safety bars etc. for glass repair

works for doors, windows, ventilators etc. including making

14 and repairing grooves/ holes/ grip etc. where required SQM 25.00 186.72

including all carpentery/ civil/ smithy works, tools and tackles

and testing the entire work etc. complete for all heights with

necessary scaffolding as per instructions.

Providing/Replacing existing rusted guide railings/ ladders/

board with frame/ grill/ safety bars etc. from window/

ventilator/ opening ceiling/ partition/ staircase/ platformsetc.

by providing/ fabricating and fixing M.S. fabricated shutter/

grill/ frame/ members as per existing pattern and using

different M.S.sections / hollow sections of ISI mark and of

reqired size including 'Asian Paints' make one caot of metal

primer etc. complete with all smithy/ civil/ carpentery work

using one's own electric welding machien sets etc. complete

for all heights as per instructions.

Providing and fixing 15micron colour anodized aluminium

glazed ventilators with lauvers mechanism of heavy strips for

5.00mm thick frosted glass panels or as per site conditions as

under: Making frame work for of approved design and quality

including fixing in section 63mm x 38mm x 1.2 mm weight @

16 0.643 kg / mtr. including fixing rubber and weather strips of SQM 22.00 1175.55

approved quality using one's own fasterners, nuts bolts, metal

screws, approved quality bearings, including necessary civil

work where required including ceiling the entire sides and

edges of frame and wall with sealing compound and testing

the entire work etc. complete as per instructions.

Providing and fixing 30mm thick FACTORY sqm

MADE SOLID BOTH SIDE PRELAM PANEL PVCDOOR

SHUTTER consisting of frame made out of M.S. tubes of

gauge thickness and size of 19mm x 19mm for stiles, top and

bottom rails. M.S. frame shall have a coat of steel primer of

approved makde and manufactures. M.S frame covered with

5mm thick heat moulded prelim PVC ‘C’ channel of siz 30mm

thickness, 70 mm width of which 50mm shall be flat and

20mm shall be tapered in 45 degree Angle on either side

forming stiles, and 5mm thick, 95mm wide pream PVC sheet

out of which 75mm shall be flat and 20mm shall be tapered in

45 degree on the inner side ot form top and bottom rail and

115mm wide prelim PVc sheet out of which 75nmm shall be

flat and 20mm shall be tapered on both side to form lock rail,

Top, bottom and lock rails shall be provided either side of the

panel. 10mm (5mm x 2) thick 20mm wide cross PVC sheet

shall be provided as gap insert for top rail and bottom rails.

Panelling of 5mm thck both side prelim PVC sheet to be fitted

in the M.S. frame welded,sealed to the stiles and rails with

7mm (5mm + 2 mm) thick x 15mm wide PVC sheet beading

on inner Back coat Plaster up to 40 mm thick plaster in

cement mortar (1:4) using sand and cement of approved

quality including even finish for cement plaster patta, grooves,

nozing, etc. and for existing civil work i.e. R.C.C. hood, slab,

shed, parapit, canopy, floor, wall and other structures etc. and

places in required size and shape including labours, using

one's own tools, tackles, scaffolding, ladder, and cleaning the

site etc. complete as per instructions at all heights.

Labour for carefully removing the existing broken white

glazed Wallhung W.C./ Orissapan W.C./ E.W.C only with it's

19 trap of any size and throwing the rubbish as and where EACH 6.00 394.5

directed including cleaning the site etc. complete for all

heights as per instructions.

ITEM NO 120 Providing and fixing wash down water closet

(European type, W.C. Pan) with integral P or S trap including

jointing the trap with soil pipe in Cement Mortar 1:1 (1-

Cement : 1-fine sand) (Seal and cover to be measured and paid

forseparately) (A) vitreous China Pattern :(i) in white colour

including removing and refixing supply pipe, plastic seat,

Each 1303.7 1 ,303.70 waste pipe,jet-spray connections, etc.

and white cement/ solvent cement at joints, N.F. screws,

cleaning the site, testing etc. complete for all heights as per

Providing and fixing washbasin with single hole for pillar tap

including C.I. or M.S. brackets painted white including

sutting holes and making good the same but excluding

fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x

v 400mm size. (i) In white colour with removing and refixing

21 pillar cock, waste coupline and waste pipe connections, etc. & EACH 8.00 1382.36

neat cement for setting, white cement at top including fixing

in required line, level & position, testing etc. completeand

throwing the broken washbasin outside campus as directed for

all heights as per instructions

Providing and fixing solid duro type plastic seat and cover for

wash down water closer with C.P. brass hinges and rubber

buffers. (B) White / Black plastic seal and cover of approved

22 make, model and colour, ISI mark heavy type for European EACH 7.00 291.33

type/ Anglo Indian type W.C with brass C.P. bolt /hooks,

testing etc. and returning the broken cover to C.D. store if

available etc. complete for all heights as per instructions.

:Providing and fixing 152 mm x 152 mm size S.S.dome type

gratings/ jalee of approved quality and of required design for

23 waste pipe making and repairing sites using one's own neat EACH 45.00 68.34

cement / white cement and cleaning etc. complete for all

heights as per instructions.

Providing and fixing 15mm dia polythelene supply pipe of

24 required length upto 45cms. heavy type with C.P. hex nut & EACH 30.00 65.14

washer set approved quality …...do…..do….

Providing and fixing 32mm dia brass C.P. waste coupline set

of approved make and ISI mark quality heavy type including

25 removing existing connections and making it good and testing, EACH 8.00 67.91

returning the broken coupline to C.D. store etc. complete for

all heights as per instructions.

Do……do……but 40mm dia ……do…… (10 Kg./ sq.cm.)

ITEM NO 149 : Labour for carefully removing the existing

G.I./ C.I./ R.C.C./ PVC pipe of any dia including allied fittings

etc. and depositing the same in C.D. store with all laboures,

27 tools, carting lifting scaffolding etc. complete as per RMT 5.00 60.68

instruction OR Labour for collecting and carting the above

pipes from C.D. store to new site ....do....do.... for 15 to 50mm

dia pipe lines.

Labour for carefully removing the existing G.I./ C.I./ R.C.C./

PVC pipe of any dia including allied fittings etc. and

depositing the same in C.D. store with all laboures, tools,

carting lifting scaffolding etc. complete as per instruction OR

Labour for collecting and carting the above pipes from C.D.

store to new site ....do....do.... for 75 to 200mm dia pipe lines.

: Providing replacing existing broken & leaking C.I./PVC

Nanhi trap by providing and fixing 110mm inlet X 110mm

size outlet Finolex/ Supreme/ Prince Nanhi trap of approved

quality heavy type with PVC gratings on top including making

& repairing hole/groove in wall/floor including filling joint

with waste pipe with adhesives solution/solvent cement mortar

(1:1) having a neat cement vata alround watering,

testing,cleaning the site etc. complete for all height as per

Providing and fixing PVC 125mm X 110mm size P-trap of

Finolex/Supreme/ Prince make of approved quality including

30 filling joints with adhesives solution and solvent cement EACH 4.00 366.21

making and repairing hole/groove including testing,cleaning

the site etc. complete for all heights as per instructions.

Pan (Indian type W.C. Pan) size 580mm (Earthwork, bed

concrete, foot reste and trap to be measured and paid for

separately) (A) Vitreous China.(I) Long pattern = White

Providing and fixing 15mm size brass C.P./ S.S. jet spray

heavy duty of approved quality and make including making

connection where required, testing etc. complete as per

Providing and fixing chromium plated brass half trun flush

cock of approved quality including fixing in pipe line etc.

complete.(ii) 25mm dia.including making and repairing hole/

groove in wall/floor etc. including stopping water and testing,

returning the old broken flush cock to C.D. store, etc.

complete for all heights as per instructions.

Providing and laying cement based Indian type water proofing

treatment inclusive of cleaning the slab/floor by wire brush

and drench the slab with water and applying cement slurry

with Sika Latex in required proportion including cleaning,

roughning and opening the cracks in "V" groove pattern and

filling the same with C.M. (1:1) on slab/floor and providing

and laying 25mm thick layer of C.M. (1:2) mixed with water

proofing compound of 'Sika', 20 Micron Nano seal make in

given proportion, providing and laying best quality,well burnt

brick bats(minimum size of brick bats 40mm) tightly and

neatlyin C.M. in requiredthickness to get proper slope and

34 gradient at the starting point i.e. centre of terrace or at starting SQM 21.00 606

of gradient(minimum thickness at water spout should be

65mm) and filling the joints with C.M. (1:1) mixed with above

said water proofing compound. The top surface of brick bats

shall be finished with 25mm thick CM (1:3) mixed with above

said water proofing compound and finishing with finished coat

of neat cement slurry and making alroud vata 15 X 15cms.,

making chex pattern 30 X 30cms. string impressions,

watering, cleaning the site and and testing the entire work etc.

complete to work at all heights as per the instructions.

Contractor has to give 8 years of warranty for waterproofing

on Rs 300/- stamp paper.

:Providing and fixing 15mm dia new bib-cock (tap) 'Prayag'

make, catalogue no.121 standard series approved quality ISI

mark or equivelent rate and quality and model heavy type

including testing 2 years warranty Tested of approved model

& quality including making and repairing hole/groove, etc.

including stopping water and testing using one's own G.I.

Coupline elbow of ISI mark where required and returning old

broken tap to C.D. store, etc. complete for all heights as per

Providing and fixing 15mm dia new bib-cock (tap) laboratory

cock (Nozle cock) 'Prayag' make, standard series approved

quality ISI mark or equivelent rate and quality and model

heavy type including testing 2 years warranty Tested of

36 approved model & quality including making and repairing EACH 15.00 212.18

hole/groove, etc. including stopping water and testing using

one's own G.I. Coupline elbow of ISI mark where required and

returning old broken tap to C.D. store, etc. complete for all

heights as per instructions.

Providing and fixing 15mm dia Pillar-cock 'Prayag' make,

catalogue no.130 standard series approved quality ISI mark or

37 equivelent rate and quality and model heavy type including EACH 8.00 254.62

testing 2 years warranty Testedapproved quality and model,

Tested …..do……do……

Providing and fixing 600mm x 450mm bevelled edge mirrror

of superior glass mounted on 6mm thick A.C. sheet or

plywood sheet and fixing to wooden pluge with C.P. brass

screws and washers.

Providing and fixing C.P. brass towel rail comlete with C.P.

39 brass brackets fixed to wooden plugs with C.P. brass EACH 8.00 603.19

scews.(B) 600mm x 20mm size.

:Providing laying and jointing in true line and level

15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings ISI make as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including testing

of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

Providing laying and jointing in true line and level

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings ISI make as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including testing

of pipe and joints and fixing the same with adhesive solvent,

41 including cost of all materials.Providing laying and jointing RMT 90 91.84

in true line and level 15mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings ISI make as approved

by Engineer In Charge. Pipe shall be fixed on the wall with

the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level

40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings ISI makes approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including testing

of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

ForWall :-Providing, laying and jointing in true line and

level 110 diametre U.P.V.C (Type B) conforming to IS

13592-1992with one end plain and other end socketed with

rubber ring, & fittings conforming to ISI14735-1999of

approved make for drainage system pipeline ,pipe shall be

jointed with each other with rubber lubricant ,pipe shall be

fixed on wall using of 4mm thick MS/GIz-patti clamp with

Powder coated U-Bolt ring with rubber insulation for heigh

at every 2000 mm center to center or shall be concealed in

walls as directed including necessary fittings such as bends,

shoes etc. including testing of pipes and joints and jointed

with adhesive solvent cement including cost of all materials.

For Bore/ Trench / Road / Floor :- Providing and fixing

160 mm dia PVC Finolex/ Supreme/ Prince type B self fit

SWR PVC pipe of IS 13592 and approved quality including

using all necessary plug type PVC fittings of 6 kg/Cm2

heavy type such as bend, tee, 'Y', cowl vent, offset etc.

including making and reapiring hole /groove in wall/ floors/

slab/beams where required including filling the joints with

chemical solution/ rich solvent cement mixture including

doing testing with water and finishing the hole/ groove in

wall/ floors/ slab/beams with cement mortar etc. complete

for all heights as per instructions etc. complete for all

heights as per instructions.(A) 110 mm dia

For Bore/ Trench / Road / Floor :- Providing and fixing

160 mm dia PVC Finolex/ Supreme/ Prince type B self fit

SWR PVC pipe of IS 13592 and approved quality including

using all necessary plug type PVC fittings of 6 kg/Cm2

heavy type such as bend, tee, 'Y', cowl vent, offset etc.

including making and reapiring hole /groove in wall/ floors/

slab/beams where required including filling the joints with

chemical solution/ rich solvent cement mixture including

doing testing with water and finishing the hole/ groove in

wall/ floors/ slab/beams with cement mortar etc. complete

for all heights as per instructions etc. complete for all

heights as per instructions.(A) 160 mm dia

Providing and fixing Urinal or approved quality including

conecting the Urinal with waste pipe , tap etc. complete.(A)

White earthenware flat back or corner type size 430mm x

260mm x 350mm including removing and refixing supply

pipe, waste connections, fixing missing, G.I. Clamps, N.F.

screws, white cement grouting/vata including fixing in

required line, level & position, etc. and throwing broken urinal

as directed, etc. complete for all heights as per instructions.

Constructing brick masonary chamber including necessary

excavation in earth/ soil up to 1.5 mtr. depth or as per site

conditions and throwing soil as directed including laying

B.B.C.C. (1:3:6) for base @ 110mm thick and making

230mm thick masonary in C.M. (1:5) alround including

good quality bricks and making half round channel in C.C.

(1:2:4) at the bottom and 15mm thick smooth cment

plaster(1:4) in required line and level, finishing the same

with floating coat of neat cement slurry alround including

47 providing 100mm thick R.C.C. slab (1:2:4) with 8mm dia tor EACH 17.00 3888.61

bars @ 4" c/c. both way as directed including necessary

shuttering and centering and good finish on top with pre

cast concrete cover for manhole size @ 60 X 60cm heavy

and of approved quality on top and inside measurement of

the chamber 0.75m X 0.75m including …do……do…

including pro.& fix. C.I.steps for any service in wall sides as

directed.... do... , testing, watering cleaning the site, etc.

complete as per instructions.

Providing un-skilled labours using one' own transportation

48 and supervising labours for the various works for 8 hours as EACH 15.00 456.52

per given instructions by Engineer Incharge.

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine

sand)(B) Conventional

Extra for brick work in superstructure above plinth level

upto floor two level (B) Conventional

Excavation for foundation upto 1.5 m depth including sorting

51 out and stacking of useful materials and disposing off the CUM 125.00 203.82

excavated stuff upto 50 Meter lead.(A) Loose or soft soil

Providing and laying cement concrete 1:4:8 (1- Cement : 4-

coarse sand : 8- hand broken stone aggregates 40 mm

nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

Providing and fixing G.I Barbed wire weighting 9.38 k.g/

53 rmt fencing using own own clips, stappels etc. complete for all RMT 1540.00 25.71

height as per instructions.

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand)

on new surface or fixing on existing flooring by adhesive

material including dismentaling of existing flooring and

jointed with color cement slurry including finised with flush

pointing & cleaning the surface etc. complete.

Providing and fixing PUF Insulated continueous sandwich

panels for walls of total thickness not less than 50 mm and

width 1.0 m made out from continue line method on automatic

plant.Panel shall have 0.5 mm thick pre coated GI sheet on

both side of Polyurethane Foam confirming to IS

12436:1988.The Precoated sheet shall be of minimum

mpa steel grade confirming to IS 14246:1995 and shall have

zinc coating of minimum 120 gsm as per IS:277:1992 , 5-7

microns epoxy primer on both side of the sheet and polyester

55 top coat 15-18 micron.The PPGI Sheet shall have plastic SQM 110.00 3118.04

protective guard film of minimum 25 microns to avoid

scratches during trasportation.The panels shall be vertically

joined together by tongue and groove joints. The PU Foam

shall be self-extinguishing, fire retardant type having

minimum density of 40 Kg/Cu.mt.( +, - 2 Kgs) including

mm thick craft paper edging on both edges. The panels shall

be fixed to the steel frame structure with minimum 5mm thick

self tapping GI screws of required length and nos. with

minimum spacing of 300 mm c/c.

Providing, fabricating and fixing for structural steel ISI

mark for Railing, Parking Shed, Main Gates, Roof Truss

etc. as per existing design or as per given design and

direction using one's own different M.S. -S.H.S /R.H.S

Hollow sections or Box sections or Pipe Sections

including necessary M.S. bolts, nuts, washer sets including

making and repairing cut, hole, groove, joints etc.including

'asian paints' make one coat of metal primer etc. complete

with all smithy/ civil/ carpentery work using one's own

electric welding machien set etc.complete for all heights as

per instructions.- Only weight of Hollow / Box / Pipe

Sections will be considered in measurement.

Percolation Bore-well of 250 mm dia including vertical

drilling machine set with ones own all equipment for

drilling including excavation of mud pit , removing sludge

57 from site and backfilling of mudpit with available soil RMT 80.00 717.29

including bore well flushing by Heavy Duty air compressor

900 CRM ,1200 psi till clear water comes out complete for

required depth etc. all complete as per instruction.

Providing and filling best quality of sorted sevaliya

58 Unscreened rounded gravel of apporved size and shape as CUM 30.00 441.07

per instruction of Engineer In-Charge.

Slotted PVC Pipe For Bore :- Providing and fixing

mm dia PVC Finolex/ Supreme/ Prince type B of 6 kg/cm2

self fit PVC slotted / round holes at regular interval pipe of

IS 13592 and approved quality including using all necessary

PVC fittings of 6 kg/Cm2 heavy type such as Bore cape

end cap etc. offset etc. including making and reapiring hole

59 /groove in wall/ floors/ slab/beams where required including RMT 40.00 688.78

/groove in wall/ floors/ slab/beams where required including

filling the joints with chemical solution/ rich solvent cement

mixture including doing testing with water and finishing the

hole/ groove in wall/ floors/ slab/beams with cement mortar

etc. complete for all heights as per instructions etc.

complete for all heights as per instructions.(A) 160 mm dia

Bore Well flushing in existing bore well / developing by

Heavy Duty air compressor 900 CRM,1200 Psi and as per

instriction including borewell development with heavy duty

compressor machine set .

Removing dry or oil bound distemper by a washing and

scraping and sand papering the wall surface smooth

including necessary repairs to scratches complete complete for

all heights with necessary scaffolding as per the instructions.

Applying two coats of full Birla White True wall care putty

Applying two coats of full Birla White True wall care putty

/ Asian Paints Tru Care Acrylic Wall Putty / Wallplast wall

putty / JK wall putty with all required ingrediants of

approved quality, filling all the un-even spots at different

places for wall, ceiling and other surfaces and making it

even and smooth, sand papering etc. complete to work at all

heights with necessary scaffolding as per instruction

Distempeing (Two coats) with oil bound washable

distemper of approved brand and manufacture and of

required shade on wall surfaces to give an even shade, over

and including a priming coat with alkali resistance primer

ofapproved brand after thoroughly brushing the surface and

other foreign matter and also including preparing the surface

even and sand parpered smooth complete for all heights

with necessary scaffolding as per the instruction.

Providing and applying Asian paints - Apex , Kansai

Nerolac - Excel Total , Berger Paints - Weather Coat , ICI

Dulux - Weathershield or equivalent make weather proof

exterior emulsion paint anti fungal,anti dust,low voc for

different surfaces of walls, ceilings etc. of different patterns

64 etc. including using approved shade etc. complete including SQM 1350.00 114.53

applying with brushing/ by roller in two coats including

thoroughly cleaning, brooming the entire surface and other

foreign matters filling 'Birla putty' if required for even and

smooth surface as directed including cleaning the site etc.

complete for all heights as per instructions.

Providing & applying one coat cement primer of asian

paints, Kansai Nerolac, Berger Paints, ICI Dulux make

including applying as per site condition for interior/exterior

walls / ceiling surfaces in one coat, even finish and after

thoroughly cleaning the surface to remove all dirt, and

remains of loose powdered materials etc. including cleaning

the site etc. all complete for all heights with necessary M S

scaffolding as per instructions.

Providing and Fixing Plain / CNC Cut ACP sheet of ISI

mark having thickness 4 mm of Solid / Metalic series

including aluminium framing Of size 63.5x38.10x1.5 mm

piping with dimentional accuracy, neat aeges and clean

66 Joints etc by using ones own screw, nails etc and seal the SQM 101.00 2824.6

joint by using silicon 789np and other required hardware

material complete for all heights using stagging scaffolding

( H frame) including grinding ,groove etc complete as

specified and directed by EIC

Providing and erecting M.S. - H frame scaffolding for

various works in campus using one's own tools and tackles

with all safety measures as per instructions of Engineer In

Providing and fixing 3 layer PVC White tank with threded

cover at top of PLASTO RUF-TUF /OXYGEN ECO or

equivalent ISI make having 10 years guarranty , approved

quality as per required capacity, shape and design etc.

including making and repairing hole, groove, lifting, carting,

and testing with water etc. complete for all heights as per

instructions of Engineer Incharge. (A) 500 LITRES

Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire

of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multistrand copper wires, in following

type of pipe to be erected concealed in/ on surface on

wall/celing complete with 6A Modular type switch / bell push

& accessories and earth continuity of following type, erected

on PVC / Metallic box, single mounting base frame covered

with textured/metallic front plate modules erected on / in wall

/ ceiling as per pipe erected,with necessary Lamp

holder/ceiling rose / H.D. Connector as directed. for Cat.III

(Max. length upto 10mtr.) (A) with medium class Rigid PVC

pipe and accessories

Point wiring for FAN with 2-1.5 sq.mm & earthwire of

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multistrand copper wires, in following type of

pipe to be erected concealed in / flushed on wall/celing

complete with 6A Modular type switch and hum free EME

four or more step type electronic fan regulator with separately

mounted and accessories with earth continuity of following

type erected on PVC / Metallic box, single mounting base

frame covered with textured/metallic front plate modules

erected on / in wall / ceiling as per pipe erected.with necessary

ceiling rose / H.D.Connector as directed. For Cat. III (Max.

length upto 10mtr. (A) with medium class Rigid PVC pipe

Point wiring for Looped Plug with 6A Modular type switch &

5 pin socket erected on PVC / Metallic box, single mounting

base frame covered with textured / metallic front plate

modules erected on / in wall / ceiling with following type

Providing following type of Modular Type Accessories

mounted with pvc / metallic box, single mounting base frame

72 covered with textured / metallic front plate, modules erected Each 7 23

with necessary connection. As desired by Engineer Incharge.

Cat.III (A) Blank Plate Single

Supplying & erecting M.S. Box having 16 Gauge painted with

red oxide or Heavy duty PVC box erected flushed on wall or

concealed in wall with necessary plastering & finishing as

directed Anchor Roma sheet metal/PVC concealed/ open

boxes with suitable frame of following size. (A) 12 Module

Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to

be erected concealed in /flushed with wall/ceiling, with 1.5 sq.

mm copper conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size (A) with

medium class Rigid PVC pipe and accessories. (a) 2 wire

Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to

be erected concealed in /flushed with wall/ceiling, with 1.5 sq.

mm copper conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size (A) with

medium class Rigid PVC pipe and accessories. (b) 2 wire

providing and erecting Miniature circuit breaker single pole

suitable to operate on 240 V A.C. system and having breaking

76 capacity 10 KA to be erected in existing box. confirming to IS Each 20 111

8828/1996 with ISI Mark Cat-III(A) 6 Amp. to 32 Amp.

Single Pole MCB

providing and erecting Miniature circuit breaker single pole

suitable to operate on 240 V A.C. system and having breaking

77 capacity 10 KA to be erected in existing box. confirming to IS Each 10 301

8828/1996 with ISI Mark Cat-III (B) 6Amp. to 32Amp.

Double Pole MCB.(C curve)

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

3, IEC 61439-1 & 3 without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company of MCB to

be used) suitable for (A) single phase incoming and horizontal

single phase outgoing (a) sheet steel double door (IP-43) (i)

Single phase 6way SS Double door.

Supplying & erecting approved make low noise decorative

79 exhaust fan having size 200mm with 1350 RPM with square Each 20 1563

frame ABS body with inbuilt lowers & square frame.

Providing & erecting Power Saving white colour Ceiling Fan

with Energy Efficient star rating, double ball bearing ISI mark

with Condenser 230 volt A.C. 50 Hz 1200 mm sweep

complete having 3blades with aluminium blades with , canopy

& 30 cms. down rod erected with 24/ 0.2, 3 core flexible wire

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with body housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with

diffuser with company mark/name 160V to 270V, Power

Factor more than 0.9, THD < 15%, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED LED driver

efficiency > 85 %( fitting required LM-79 & LM-80

Certificates) (NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)(A)

Tube light with intergral driver Cat-III (a)22-24 watts ,surge -

2KV,IP -20, 4 feet

Supplying and erecting LED street light/Flood light fittings

with high power white LEDs of wattage of 1 watt and above

assembled on single MCPCB,efficacy more than 130 lm/w and

corrosion free high pressure die cast aluminum housing with

smooth finish powder coated and heat sinnk extruded with

diffuser and polycarbonate optics/lenses with company mark

name engraved or embossed.120 V to 300 V, power factor

more than 0.95,THD < 10 % ,CCT 5000K to 5700 K,

Uniformity ratio >0.45, Luminaire efficacy >85%

lumens/watt. LED driver efficacy> 85 % (each fitting shall

require LM-79 and LM-80 certificates) (NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (A) Street Light (IP-65),

Surge protection -4KV integral and 10 kv non integral ,Light

must have 440VAC line supply protection. It should withstand

48 hours for 440VAC line supply. Cat-III (a) Street light (IP-

65), surge 4KV above 36watt to 48 watts

Providing and erecting "B" class iron pipe 32 mm outside dia

and 45 cms long duly welded on 20 cms X 20 cms X 3 mm

83 thick M.S. base plate, to be erected on wall or corner for Each 6 343

mountin street light luminaire with necessary hardware

material duly painted as per instruction of Engineer in charge.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand / solid Copper conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench / pipe

of following size of cables (A) 4core 4.00sq.mm.

Making trench in soft soil of suitable width and 90cms Deep

for laying cable or locating the fault all over the run and back

filling the same and making the ground proper etc. complete as

per instructions.

Making trench in Hard Murrum / RCC Surface/ Tar Road of

suitable width and 90cms depth for laying any size of cable or

locating the fault all over the run and back filling the same and

making the surface as normal ground.

Providing and fixing heavy duty flange type brass cable gland

with rubber ring for PVC insulated armoured cable complete

with outgoing tails insilating tape etc. following size of cables.

(A) 2 to 4core 2.5/4sq.mm.

Solder less crimping type Copper lugs confirming to IS

suitable for cable of following size evenly crimped with high

pressure tools an connected to switchgear terminal with brass/

cadmium plated nut-bolts in approved manner. (A) 1.5/2.5 to

Providing and laying Double walled corrugated pipes (DWC)

of polyethylene (confirming to IS- 1493011) with necessary

connecting accessories of same material at required depth for

laying cable below ground/road surface for enclosing cable

and backfiling the same to make the ground as per original.

(A)50 mm outer dia