WELCOME MAINTENANCE TO OFFRS ACCN PB MARG AND CWL AND ZONE - I TO IV UNDER AGE B/R - II OF GE (WEST) BAREILLY.

Amount

Demolition of brick or stone / boulder work built in cement mortar as in quoins, arches,pillars etc. complete all as specified and directed.

M&L for Brickwork with fly ash brick in CM 1: 6 straight or curved on plan exc 6 m mean radius. complete all as specified and directed.

Demolition of cement concrete (un-reinforced) including terrazzo, tiling etc of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Supply only liquid water proofing compound all as specified and directed( Make : Dr. Fixit of pidilite or equivalent)

M&L for cement concrete type D2,1:4:8 (using 20 mm graded stone aggregate) as in mass concrete complete all as specified and directed

M&L for 25 mm thick cement concrete type B0, 1:2:4 (using 12.5 mm graded stone aggregate) in floors, finished rough to receive floor tiles complete all as specified and directed

M & L for 75 mm thick cement concrete 1:3:6 type C-2, using 40 mm graded stone aggregate as in plinth protection laid to slop of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm wide joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed.

Dismantling floor, stone, hearth or wall tiling/terrazo/sotne slab including cement mortar bedding complete or in patches and removing rubbish off the premises complete all as specified and directed.

M&L for glazed coloured ceramic tiles 450 x 300 mm x 7 mm thick in vertical wall complete or in patches surfaces set and jointed in neat cement slurry and pointed in white cement using pigment to match the shade of tiles incl plastering 10mm thick in CM 1:4, complete all as specified and directed.

M&L for non skid ceramic coloured tiles Edge cut 7 to 8 mm thick (Square) size of each tiles 400 x 400 mm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screeding 15mm thick in CM 1:6, complete all as specified and directed.

All as per Serial item No 10 above but as in vertical surfaces incl plastering 10mm thick in CM 1:4 complete all as specified and directed

M&L for Vitrified tiles light shade 10mm thick (square) polished, size of each tiles 600 x 600 mm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement incl screeding 15mm thick in CM 1:6, complete all as specified and directed

All as per serial item No 12 but as in vertical surfaces incl plastering 10mm thick in CM 1:4, complete all as specified and directed

M&L for glazed coloured ceramic tiles 300 x 200mm x 7mm thick in vertical wall complete or in patches surfaces set and jointed in neat cement slurry and pointed in white cement using pigment to match the shade of tiles incl plastering 10mm thick in CM 1:4, complete all as specified and directed.

S&F 16 to 18 mm thick granite stone slabs mirror polished of colour and shade as approved by GE, machine cut bedded & jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of granite stone fixed as in steps, jambs, pillars window cills, cooking platforms & the like over a screed bed of 15mm thick CM 1:6 etc complete all as specified and directed

Rounding to edges of stone slabs one edge , such as in steps , cooking platform , and other similar situations complete all as specified and directed

S&F in repairs 20 mm dia Stainless Steel fancy type drapery curtain rod with brackets and lattu & other connected accessories etc complete all as specified and directed.

S&F in repairs 20 mm dia Mild steel fancy type drapery curtain rod with brackets and lattu & other connected accessories etc complete all as specified and directed.

M&L for 15mm thick cement plaster on brick surfaces or concrete surfaces in CM (1:4) including finishing the surface even and fair complete all as specified and directed.

M&L for 15mm thick cement plaster on brick surfaces or concrete surfaces in CM (1:6) including finishing the surface even and fair and applying two coats of oil bound distemper over a coat of birla wall care putty and including taking down existing defective cement plaster on brick or stone masonary complete all as specified and directed.

M&L 15mm thick rendering on walls brick or concrete surfaces in cement mortar 1:4 with water proofing compound, incl finish even and fair w/o using extra. Cement and then applying three coat white wash after preperation of newly plastered surface including taking down cement plaster on brick wall/stone wall, ceilings etc, racking out joints, hacking for key & scrubbing with water complete all as specified and directed.

M&L 5 mm thick cement plaster on fair faces of bricks or concrete in ceiling & chajja using CM 1:4 finished even and smooth without using extra cement and then applying three coat of white wash after preparing the surface including Taking down cement plaster on brick wall/stone wall, ceilings etc, racking out joints, hacking for key & scrubbing with water completely

M&L for preparation of new plastered surfaces of walls and applying two coats of Cement base paint over a coat of primer complete all as specified and directed

M&L for preparation of old distempered surface of walls including plugging nail holes with cement based putty,making good surface to match existing surface and applying one coat of oil bound distemper complete all as specified and directed.

M&L for preparation of old distempered surface of walls including plugging nail holes with cement based putty,making good surface to match existing surface and applying two coats of oil bound distemper complete all as specified and directed

M&L for preparing of old distempered surface of ceiling and applying one coat of oil bound distemper including rubbing down old white wash or oil bound complete all as specified and directed

M&L preparation of old plaster surfaces and applying one coat of white wash on walls including rubbing down old white wash complete all as specified and directed

M&L preparation of old plaster surfaces and applying one coat of cement base paint on walls including rubbing down old white wash/Cement base paint complete all as specified and directed

M&L preparation of old plaster surfaces and applying one coat of white wash on ceilings surface including rubbing down old white wash . complete all as specified and directed

S&F in repairs door seal of aluminium powder coated with cotton mat of length 90 cm to 100 cm long complete all as specified and directed.

Complete removal of existing treatment from wall/ ceiling surfaces and rubbing down with sand paper to have even and smooth surfaces complete all as specified and directed.

M&L for applying layer of birla wall care putty on wall/ceiling surfaces including rubbing down the surfaces with sand paper after getting dried to obtain a smooth & even surface complete all as specified and directed.

S&F in repairs Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint inlcuding complete all as specified and directed

M&L for preparation of old painted steel surfaces of any description and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F 15mm bore tubes medium grade galvanised iron with all new fitting and fixed to walls and ceiling or laid in floors including taking down old unserviceable steel tubing complete all as specified and directed.

S&F 20 mm bore tubes medium grade galvanised iron with all new fitting and fixed to walls and ceiling or laid in floors including taking down old unserviceable steel tubing complete all as specified and directed.

S&F in repairs Vitreous china wash down water closet (pedestal pattern) white complete, including connection to drain pipe and to flushing pipe antisyphonage pipe etc complete all as specified and directed

S&F in repairs vitreous china Orissa pattern IWC size 580x440mm white with integral foot rest complete including trap complete all as specified and directed

S&F in repairs plastic water closet white seat cover closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed

S & F in repairs PVC low level flushing cistern of capacity 10 ltrs with inlet, ball valve, float and handle including brackets and flush pipe of PVC 32mm dia complete all as specified and directed.

S&F in repairs Vitreous china wash basin white flat back 550mm x 400mm excluding tap, waste, chain & plug but including brackets complete all as specified and directed

S&F in repairs kitchen sink with drainage board made of stainless steel 1 mm thick with plugs washers and waste pipe and coupling including bedding in cement mortar on dwarf walls including brackets and connecting union to pipe overall size of sink 915 x460 mm and bowl size 410x330x160 mm complete all as specified and directed.

S&F in repairs plate rack made out of 1 mm thick stainless steel sheet of size 75 cm x 90 cm x 25 cm with all internal fittings (as per sample) complete all as specified and directed

S&F in repairs waste coupling for wash basin and kitchen sink complete all as specified and directed

S&F in repairs PVC waste pipe 25 mm dia 750 to 800mm long fixed to waste fitting of wash basin including socket suitable for waste fitting complete all as specified & directed

S&F in repairs centre hole basin mixture 15 mm dia chromium plated complete all as specified and directed.

S&F in repairs chromium plated fancy type stop vlave /angle valves/ two way angle valve with cup cast copper alloy screwed down high pressure, screwed both ends for iron pipes or for unions for 15 mm bore pipe complete all as specified and directed.

S&F in repairs chromium plated fancy type long body bib taps with cast copper alloy screwed down, screwed for iron pipe or for brass ferrule for 15 mm bore pipe complete all as specified and directed.

S&F in repairs 100 mm dia shower rose of Chromium plated brass for fixing 15 mm pipe with shower arm size 195 mm long with bend of 45 degree with flange complete all as specified and directed.

S&F in repairs chromium plated wall mixture with connection for shower arragement complete all as specified and directed.

S&F in repairs water jet for ETWC chromium plated with PVC connection complete all as specified and directed.

S&F CP heavy duty extension pieces 15mm bore and 25 mm long in repairs complete all as specified and directed

S&F in repairs hand shower (health faucet) 1 mtr PVC tube with wall hook complete for ETWC complete all as specified and directed.

S&F in repairs PVC connections 15mm dia & 450mm long with PTMT nuts complete all as specified and directed.

S&F in repairs Chromium plated toilet paper stand as per directed by engg-in-charge

S&F in repairs Chromium plated towel ring as per directed by engg-in-charge

S&F in repairs glass shelf with chromium plated brackets of suitable size as per directed by engg-in-charge

S&F in repairs Bib tap (15 mm)standard of PTMT any colour high pressure screwed for iron pipe and screwed complete all as specified and directed

S&F in repairs pillar tap (15 mm)standard of PTMT any colour high pressure screwed for iron pipe and screwed complete all as specified and directed

S&F in repairs stop cock/ angle valve (15 mm)standard of PTMT any colour high pressure screwed for iron pipe and screwed complete all as specified and directed

S&F in repairs Stainless steel soap dish complet all as specified and directed.

S&F in repairs PVC toilet cabinet with mirror of size 20"X16" of selecred quality complete as specified and directed .

S&F rotational moulded polythene water storage tanks tripple layer white in colour (cylindrical vertical with closed top) hoisted and fixed in position capacity 500 ltrs including dismantling of existing unserviceable water tank capacity exceeding 250 ltr and not exceeding 500 ltr complete all as specified in SSR Part I and directed

S&F rotational moulded polythene water storage tanks tripple layer white in colour(cylindrical vertical with closed top) hoisted and fixed in position capacity 1000 ltrs including dismantling of existing unserviceable water tank capacity exceeding 500 ltr and not exceeding 1000 ltr complete all as specified in SSR Part I and directed

S&F in repairs Vitreous china wash down water closet single piece-WC with UF seat cover, hinges, fixing accessories, cistern fittings, size 655x665x760, S trap-300mm including connection to drain pipe etc complete all as specified and directed.

Repair of aluminium door/window/ ventilator/ partition wall etc of any size / any number of panels including taking down (if required) & refixing for easy closing/ opening/ tightening of hinges or changing the position of hinges, adjustment of floor door spring of hydraulic door closure, adjustment of tower bolts, sliding bolts etc changing of mortice lock complete all as specified and directed

S & F repair wall panelling of plastic vinyl composite of size 3050 x 254 x 8 mm thick with wooden/plane surface waterproof , termite proof, chemical resistant of light weight fixed with wooden screw with rawl wall plug complete all as specified and directed.

S&F in repairs Mortie lock, verticle type size 100 mm mild steel complete all as specified and directed.

Dismantling of asbestos cement or GI based sheet (corrugated, semicorrugated, etc) sheets in roof coverings complete all as specified and directed.

M&L for 6mm thick asbestos cement, corrugated or semi corrugated sheets including ridge in roofs, walls etc fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

S&F prepainted galvalume aluminium zinc coating GI based corrugated sheet of 0.50 mm thick and colour having tensile strength of 550 mpa as in roof covering /callading, riges,to wall fixed with screw complete as specified and directed by engg-in-charge

S&F prepainted galvalume aluminium zinc coating GI based plain sheet of 0.50 mm thick and colour having tensile strength of 550 mpa as in roof covering /callading, riges,to wall fixed with screw complete as specified and directed by engg-in-charge

Repairs to steel windows by replacing all old friction hinges with box type hinges, making the windows functional incl all necessary welding etc as required at site and complete all as specified and directed.

S & F handles/stoppers with welded or revating to steel windows by replacing all old handles/stoppers making the windows functional incl all necessary welding etc as required at site complete all as specified and directed.

Repair of flush or skeleton doors with aluminum /wooden/PVC sheet including taking down the door and fitted in same opening complete all as specified and directed.

M&L Grinding and polishing to old terrazzo flooring/ skirting,complete all as specified and directed.

Repairs of WHB mixture/shower pannel/float valves of one piece EWC/angle vagle/bib tap including all required accessories complete all as specified and directed.

M&L for polishing to old wall panelling, complete all as specified and directed.

Taking down shutter of any description exc 1 sqm and n/exc 2 sqm each incl removing from the premises complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off single shutter/ double shutter from the frame)exc 1.5 sqm and n exc 4.00 swm incl removing from the premises complete all as spd and directed

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n. exc 1.5 sqm incl removing from the premises complete all as spd and directed

S & F solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube all as specified or as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) one side prelam pvc in place of plain and another side decorative, consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width strucks inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either to side and as gap insert for top rail & bottom rail panelling to be fitted in MS frame welded/sealed to stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site complete all as specified and directed.

S&F 2nd class hard wood chowkhat or frames, plain solid, wrought, framed and rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified & directed by Engr-in-Charge

S& F for Flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 2nd class hardwood glazed and Skelton shutters 30 mm thick open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, stiles and rails as specified in SSR Part I section 8 clause 8.20 (a) supplied and fitted to chowkhats complete all as specified and directed.

S&F factory made PVC Cupboard frame of the size 75mm x 40mm with a wall thickness of 5mm, made out of extruded 5mm thick plain/prelam PVC sheet of density 600 kg/cbm, having bottom width of 50mm and thickness of 10mm. All four frame lengths reinforced with 15 mm x 15mm M. S. square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners adjointed with 2 nos. of 15mm long brackets 0f 10mm x10mm M S square tubes. The door frame shall be fixed to the wall using 8/100 long M S screws through the frame by using PVC fasteners. A minimum of 4 nos. of screws to be provided for each vertical member and minimum of 2nos. of screws to be provided horizontal member etc. complete as per direction of Engr-in-Charge, manufacturer's specification and drawing.

S&F factory made PVC cupboard flush type shutter of 30mm thick consisting of frame made out M S tubes of 19 gauge thickness and size 19mm x 19mm for stiles and rails. The inside panel shall consist of 20 mm thick multichamber hollow PVC section of 1mm wall thickness, bonded using solvent cement/ cynoacrylate adhesive with 5mm thick plain/prelam PVC sheet, on both side of inside panel incliding necessary items to fix the shuter to frame such as 100mm stailess steel hinges, 100 mm long handles made of anodised aluminium and magnetic ball catch for each pair of shutter.All four edges of the panel to be sealed with lipping of 10mm thick and 20mm wide PVC sheet baton (made by sticking 2nos. PVC foam sheet of 5mm thickness using PVC solvent cement adhesive). complete as per direction of Engr-in-Charge.

S&F PVC boards 18/19 mm thick any colour/ prelaminated as in cabinets incl shelves and shutters, fixed with screws and adhessive as per direction of Engr-in-Charge and, manufacturer's instructions including piano hinges, magnet catcher, handles etc.

S&F PVC boards 5 mm thick any colour/ prelaminated as in fixed in almirah/wall or as per direction of Engr-in-Charge etc.

S&F in repairs steel windows with pressed steel frame (size 95 x 45 x 1.25 mm ) side hung shutter including box type hinges with steel handle and steel peg stay with glazed openable shutter with glazing bar ( open out side ) and wie gauged openable shutter without glazing bar ( open inside ) dovetailed or welded complete all as specified and all as per DRG No TD/088 dt 07 Jan 2002 Note :- (i) Two shutters ie wire guaged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit (II) rate for filling PCC in frame deemed to be included in quoted rates (iii) MS grill shall be measured and paid seperatly under relevant item of schedule

S&F mild steel framed work such as grills grating etc with ends of bars shouldered and/or riveted or forged into spikes framed guard bars, barrel iron doors ladders framed balusters walk ways railing frame work of water tanks, hole fast and similar work confirming to Fe -290 Gde-E-165 all as spd and directed .

S&F in repairs 140 mm double legged door stopper of aluminium alloy with rubber complete all as specified and directed

S&F Butt hinges, medium weight, Stainless steel and fixed of size 150mm. complete all as specified and directed.

S&F aluminum anosided barrel tower bolts 150mm long, of extruded section and fixedcomplete all as specified and directed.

S&F aluminum anosided handle 150mm long of extruded section and fixed complete all as specified and directed.

M& L for 125 mm long Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repair 300mm size aluminium alloy anodised sliding door bolt with hasp & staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolt and sliding bolt of extruded section or cast alluminium alloy complete all as specified and directed.

S & F in repairs of wooden door stoppers between chowkat and shutters including 100mm butt hinges fixed on chowkat complete all as spd and directed

M&L preparation of new wooden surfaces and applying two coats of synthetic enamel paint over one coat of pink primer over 10 cm width or girth complete all as specified and directed.

M& L for Preparation of new iron surface and two coat of synthetic enamel paint ovar a coat of red oxide primer complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed

S&F sheet glass 3 mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.

S & F in repairs stainless steel wire mesh 0.36 mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned takes or galvanised Wire staples complete all as specified and directed

S&F in repairs150mm helical door spring complete all as spd and directed

M&L in repairs 4 mm thick E board classic (everest /equivalent) tiles for insulation and accoustic purpose 60X60 cm with and including powder coated galvanium iron snap grid with 32X25X1.5 mm thick tee section and 32X25X1.5 mm thick angle section with all hanging /sopporting arragements as in false ceilling with frame and making good disturbed surface complete all as specified and directed .

Dismantling of cast iron /PVC/AC/SGSW pipes 100mm dia jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

S&F PVC(SWR) 110mm dia soil waste and rainwater drainage pipes single socketed in any length with rubber ring joint fixed to wall complete all as specified and directed

S&F PVC (SWR) 110mm dia bends complete all as specified and directed.

M& L for providing precast cement concrete rubber moulded chequered coloured tiles 20 to 25 mm thick even finished on top of approved design and pattern complete all as specified and directed

M& L for providing precast cement concrete rubber moulded coloured interlocking tiles 60 mm thick with grey cement and pigment of approved design and pattern laid over a layer of 25 mm thick sand cushion including filling the joint with sand complete all as specified and directed

M&L for 40 mm thick cement concrete type B1, 1:2:4 (using 20mm graded stone aggregate) finishing sufaces even and smooth without using extra cement complete all as specified and directed.

M&L PCC 1:2:4 type B-0 (using 12.50 mm stone aggregate) as in, levelling course with to be finished even and fair without using extra cement on roof surface / chajja/ mud stoppers (thickness of concrete will be provided as per site requirement and as directed by engr-in-charge) complete all as specified and directed.

Taking down hood covers of rolling shutters of area not exceeding 6 sqm loose brackets plates or guide properly greasing helical spring,shafts, and guide, channel for proper functioning of rolling shutter of any size and refixing covers in position after repairs complete all as specified and directed.

Notes:- (a) Materials not included in sch of credit and debris from the dismantling having lowest value/Nil value shall be the property of department. The same shall be removed/ disposed or deposited by the contractor in MES stores yard of GE (West) Bareilly as directed for which no additional payment shall be made. The contracotor shall be fully responsible to safe guard these materials against losses/theft/deterioration etc till the same are deposited by him in MES Store yard (b) The contractor or his authorised representative shall attend office of AGE B/R daily at 0830 hrs on all working days to take orders/instructions regarding the jobs to be done. A proper record of jobs ordered and completed shall be entered in a register duly signed and dated by Engineer-in-Charge and contractor.

Notes:- (c) Penalty shall be imposed on the contractor for not completing the jobs in time bound manner as under :- (i) Not completing the jobs requiring one tradesman within 24 hrs - Rs 300/- per day per job (ii) Not completing the jobs requiring two tradesman within 48 hrs - Rs 500/- per day per job. (iii) Not completing the jobs requiring more than two tradesman within 7 days - Rs 1500/- per day per job (d) The above aspects shall be borne in mind by the tenderer while quoting the rates. The rates quoted by the tenderer shall be deemed to include the above aspects. (e) Tenderers may note that amount as given in schedule of credit will be deducted from the total amount to worked out the net contract sum at the time of Acceptance of tender.

SURYA CONSTRUCTION (BID ID -3139330)

novell engineers (BID ID -3142828)

madhur buildtech (BID ID -3149544)

SHRI BALA JI STORE (BID ID -3142499)

NIN & COMPANY (BID ID -3142251)

M/S Gupta and Company (BID ID -3150081)

ASIAN FOODS (BID ID -3143406)

RIYASAT ALI KHAN (BID ID -3143509)