Construction of Toilet block and Urinals for Gents and Renovation of Ladies Toilet at Market Yard, Kadapa

Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts. lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming whenever necessary dressing the bottom of foundations to levels in all direction, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.

Filling of foundations with conveyed Gravel free from admixture of foreign material in layers of 15cms. Thick, watering, tamping, including cost and conveyance of all materials to site from approved source, labour charges of all items of work and all incidental and operational charges etc., complete as per standard specification referred and direction of the departmental officers

P.C.C. (1:5:10) prop. Using 40mm HBG / HBT Machine crushed metal with screened sand including cost and conveyance of all materials to site from approved source, seignior ages charges, machine mixing, laying concrete in layers of 15cms. Thick well-compacted in position, curing for required period protecting the sides of foundation trenches whenever necessary and all incidental and operational charges and labour charges etc., complete as per standard specification referred and as per directions of the departmental officers.

VRCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work including centering, shuttering. For Column Footings

VRCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work including centering, shuttering. For Column Pedastals

VRCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work including centering, shuttering. For G.L.Beam / Plinthe beam

VRCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work including centering, shuttering. For Lintel Beams

VRCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work including centering, shuttering. For Roof beams

VRCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work including centering, shuttering. For Columns upto 3.66 Height

VRCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work including centering, shuttering. For Slab 125mm thick

Providing High Yield Strength Deformed steel bars (Fe 415 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work.

P.C.C. (1:3:6) prop. Using 40mm and 20MM HBG / HBT Machine crushed metal in 2/3 and 1/3 respectively with screened sand including cost and conveyance of all materials to site from approved source seigniorage charges machine mixing laying concrete in layers of 150mm thick well compacted in position curing for required period, protecting the sides of foundations trenches when ever necessary and all incidental and operational charges and labour charges etc., complete as per standard specification and direction of the departmental officers.

Brick Masonry in C.M. (1:6) prop. Using 2nd class well burnt bricks from approved quarry free from warping, distortion cracks, chips, flows stones and nodules free from lime in accordance with IS-3495-1966 and screened sand including cost and conveyance of all materials to site, scaffolding charges, seigniorage charges of all materials, seigniorage charges of all materials, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the deptl., officers.

Supply and fixing in position M.S Ornamental Grill Gates using M.S flats, square rods, angles etc., of approved design weighing at the rate of 35 Kg.per Sqm, including necessary cuttings, bending, fabrication, welding grinding, and finishing smooth including cost of making holes in RCC or Masonry works and making good the same where ever necessary, including cost and conveyance of all materials, labour charges and all other incidental and operational charges etc., complete as directed by the departmental officers.

Plastering 20mm thick in CM (1:5) including cost and conveyance of all materials like cement, sand, water etc., to site, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing mortar,scaffolding charges, lift charges, finishing,including cutting of Grooves wherever necessary as directed by Engineer - in - charge, curing, etc., complete for Uneven Surfaces of Brick Wall for finished item of work. (APSS 901,903 & 904)

Plastering 12mm thick in CM(1:5) including cost and conveyance of all materials like cement, sand (screened), water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., complete for finished item of work(APSS No. 901 & 903)

Ceiling Plastering 12mm thick in CM(1:3) including cost and conveyance of all materials like cement, sand (screened), water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., complete for finished item of work(APSS No. 901 & 903)

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work

Painting to walls with 2 coats of acrylic interior emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and ramains of loose powdered material, including cost and coveyance of all materials to work site and all operational, incidental, labour charges etc,. complete for finished item of work For Inside walls

White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials

Painting to walls with 2 coats of acrylic exterior emulsion paint of approved brand over primary coat (total 3 coats) and shade after thoroughly brushing the surface to remove all dirt and ramains of loose powdered material, including cost and coveyance of all materials to work site and all operational, incidental, labour charges etc,. complete for finished item of work For outside walls

Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers. For New Iron Work

Constructing 457.2 mm x 457.2 mm (1'6" x 1'6") brick in CM 1:6 prop. Masonry Inspection chamber upto 914.4mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6" x 1'6") C.I. Frame andcover of 20Kg., including cost and conveyance of materials, labour charges etc., complete. (BMW-B-06)

Constructing 904.0 mm (3’0”) dia brick masonry inspectionchamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mmincluding plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification andincluding cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental andoperational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.

Dadooing with decorated white back ground glazed tiles, set over base coat of cement mortar (1:6), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials

Flooring with full Ceramic Tile flooring in specified thickwith ceramic tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials.

Supply and fiixng of paving and interlocking tiles set over base coat of CM (1:6) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of conveyance loading and unloading charges of tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials

Providing and fixing 30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame BMT-N.92

Door Frame section of 50 x 75 MM . The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member.BMT-N.83.A

Supplying and fixing Orissa Pan white glazed W.C. 1st quality ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap 580 mm x 440 mm (BMW-D.04)

Supply and fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 min nomianl size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko / Senior / Nice / Eso or equivalent complete with standard CI brackets including wooden block: 550 x 400mm - Single C.P.Pillar cock (BMW-D.24)

Supplying and fixing Pedastal for Wash Hand Basin (H.S.W. / Parry / Earthenware including cost and conveyance of all amterials and all labour charges etc., complete (BMW-D.29)

Supply and fixing white glazed flat back Bowl urinals of size 440mm x 265 mm x 315mm with internal flushing rim fixed with screws complete Indian make conforming to IS2556-1995 (BMW-D.33)

Supply and Fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007). For 22.20mm OD CPVC Pipe - SDR 13.5

Supply and Fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007). For 28.60mm OD CPVC Pipe - SDR 13.5

Supply and Fixing of 110mm dia PVC Pipe 4kg/cm2, including cost and coveyance of all materials and all labour charges etc., complete.

Supply and Fixing of CP Short body bibcock fancy type deluxe heavy duty 12.7mm dia Indian make, including cost and coveyance of all materials and all labour charges etc., complete.(BMW-E-22)

Supply and Fixing of 12.7 mm dia NP Pillar cock heavy duty 1st quality Indian make, including cost and coveyance of all materials and all labour charges etc., complete.(BMW-E-28)

Supply and Fixing of 19.05 mm dia heavy duty NP Stop cock Indian make with ISI mark, including cost and coveyance of all materials and all labour charges etc., complete.(BMW-E-37)

Supply and Fixing of 12.7 mm dia NP Push cock 1st quality, including cost and coveyance of all materials and all labour charges etc., complete.(BMW-E-29)

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet& outlets and over flow pipes but without fittings & base support for tanks including cost and conveyance of all materials to work site and all labour charges etc., Complete for finished item of work.

Supply and fixing G.I. Union 12.7mm of 1st quality, including cost and conveyance of materials, labour charges etc., complete. (BMW-F-01)

Supply and fixing G.I. Union 25.4 mm of 1st quality, including cost and conveyance of materials, labour charges etc., complete. (BMW-F-03)

Supply and fixing G.I. Union 31.75 mm of 1st quality, including cost and conveyance of materials, labour charges etc., complete. (BMW-F-04)

Supply and fixing G.I. Union 25.4 mm dia, including cost and conveyance of materials, labour charges etc., complete. (BMW-F-07)

Supply and fixing 12.7 mm dia T A class of 1st quality, including cost and conveyance of materials, labour charges etc., complete. (BMW-F-08)

Supply and fixing 31.75 GI Bend of 1st quality, including cost and conveyance of materials, labour charges etc., complete. (BMW-F-09)

Supply and fixing 25.4 copper ball cock ith PVC ball Indian make ISI mark, including cost and conveyance of materials, labour charges etc., complete. (BMW-F-11)

Supply and fixing 19.05 copper ball cock ith PVC ball Indian make ISI mark, including cost and conveyance of materials, labour charges etc., complete. (BMW-F-13)

Supply and fixing 38.1 C.P waste coupling Half or Full Thread 1st quality Indian make Parryware or equivalent, including cost and conveyance of materials, labour charges etc., complete. (BMW-E-31)

Supply and fixing of PVC low level system with internal components & short bend:10 Liters capacity Single Flush, including cost and conveyance of materials, labour charges etc., complete. (BMW-G-08)

Supply and fixing of 38.1 mm dial PVC Solid waste pipe outlet, including cost and conveyance of materials, labour charges etc., complete. (BMW-G-06)

Supply and fixing of 75mm dia 3 M PVC/ SWR pipe 4 Kg/Sq.cm, including cost and conveyance of materials, labour charges etc., complete.

Supply and fixing of 90mm dia 3 M Doible socket PVC/ SWR pipe 4 Kg/Sq.cm, including cost and conveyance of materials, labour charges etc., complete. (BMW-G-15)

Supply and fixing of 110mm dia 3 M Doible socket PVC/ SWR pipe 4 Kg/Sq.cm, including cost and conveyance of materials, labour charges etc., complete. (BMW-G-16)

Supply and fixing of 75mm dia - 45 Degree Bend - UPVC / SWR pipe fittings, including cost and conveyance of materials, labour charges etc., complete. (BMW-G-61)

Supply and fixing of 75mm dia Vent Cowl UPVC / SWR pipe fittings, including cost and conveyance of materials, labour charges etc., complete. (BMW-G-98)

Supply and fixing of 90mm dia Vent Cowl UPVC / SWR pipe fittings, including cost and conveyance of materials, labour charges etc., complete. (BMW-G-99)

Supply and fixing of 110mm dia Vent Cowl UPVC / SWR pipe fittings, including cost and conveyance of materials, labour charges etc., complete. (BMW-G-100)

Supply and fixing of 75mm dia Pipe clip UPVC / SWR pipe fittings, including cost and conveyance of materials, labour charges etc., complete. (BMW-G-104)

Supply and fixing of 90mm dia Pipe clip UPVC / SWR pipe fittings, including cost and conveyance of materials, labour charges etc., complete. (BMW-G-105)

Supply and fixing of 110 mm dia Pipe clip UPVC / SWR pipe fittings, including cost and conveyance of materials, labour charges etc., complete. (BMW-G-106)

Supply and fixing of Round Jali UPVC / SWR Pipe fittings, including cost and conveyance of materials, labour charges etc., complete. (BMW-G-121)

Supply and fixing of 110mm x 90mm - Internal Reducer UPVC / SWR Pipe fittings, including cost and conveyance of materials, labour charges etc., complete. (BMW-G-150)

Supply and fixing of 31.75mm dia PVC flexible waste pipe of 914.4mm length of 1st quality, including cost and conveyance of materials, labour charges etc., complete. (BMW-G-05)

Supply and fixing of 110mm Nahany Trap, including cost and conveyance of all materials and labour charges etc., complete for finished item of work.

Electrical items

Supply and fixing of 25mm dia 1.8mm thick P.V.C. Pipe (ISI MARK) concealed in wall with all required accessorice including masonary work for light, fan and separate plug point with well seasone metalic box incluidng all labour charges etc.,

Wiring with 2 runs of 14/0.3mm (1.0 Sqmm) Fire Retardant PVC insulated flexible copper cable (ISI Mark) in existing pipe with 6A Switch, Ceiling rose and 3mm thick hylem sheet covering to switch control box inlcuindg all labour charges etc., complete For Light point as per standard data.

Wiring with 2 runs of 14/0.3mm (1.0 Sqmm) Fire Retardant PVC insulated flexible copper cable (ISI Mark) in existing pipe with 6A Switch, Ceiling rose and 3mm thick hylem sheet covering to switch control box inlcuindg all labour charges etc., complete For Fan point as per standard data.

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of >=90 lumens/watt , PF>0.9, Surge protection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty.Makes: As per list of recommended brands as category II (MAT-03348)

Supply of 48" (1200mm) Sweep 5 star rated BLDC (Brush less Direct Current) Ceiling Fan with double ball bearings, input voltage 230V AC converted to 24 V DC, power input not more than 30W, air delivery not less than 220 cubic meter/min and a minimum service value of 7.0, with remote and without Regulator. Makes: As per list of recommended brands MAT- 05508

Supply and fixing of 6A 3Pin wall plug with 6 A swithc control on a common swith board with earth continuty including cost and conveyance of all materials etc., complete.

Supply and fixing of 16A 3Pin /6A 3 Pin plug socket with indicator lamp and 16Amps fuse unit and 16 amps switch control (5 in one ) on decolom sheet Covered board including earth connection and all labour charges etc., complete on wall. as per standard data.

Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 7W LED, 490Lumens bulb (for new installation).Holder Make: Anchor / Gold Medal Olive / Million Zoom LAMP Make:Phillips / OSRAM / GE / Crompton.

Supply and run of 2 of 36/0.3mm (2.5 Sqmm) FR P.V.C insulated flexible copper cable in existing pipe for mains including all labour changes etc., complete as per standard data.

Supply and run of 1 of 14/0.3mm (1.0 sqmm) F.R.P.V.c insulated fixible copper cable in existing pipe for earth continuity including all labour charge etc,. Complete.

Supply and run of 2 of 56/0.3mm (4.0 sqmm) F.R.P.V.c insulated fixible copper cable in existing pipe for earth continuity including all labour charge etc,. Complete.

MAINTENANCE FOR EXISTING TOILET AND URINALS TO C.WALL

Supply, installation and commissioning approved make floor mounted EWC (Suit) CASCADE model ‘P’ or ‘S’ trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap 15mm angle stop cock 450mm long PVC inter connection pipe wall flanged all of approved make etc., complete for finished item of work in all respects

Supplying & Fixing white glazed flat back half stall Urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader of overall size 95x95x57mm conforming to IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian make: 410 x 265x 305mm etc., complete (BMW-D.33)

Providing and fixing 30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame BMT-N.92

Door Frame section of 50 x 75 MM . The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member.BMT-N.83.A

Supply and Fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) For 22.20mm OD CPVC Pipe - SDR 13.5

Supply and Fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) For 28.60mm OD CPVC Pipe - SDR 13.5

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet& outlets and over flow pipes but without fittings & base support for tanks including cost and conveyance of all materials to work site and all labour charges etc., Complete for finished item of work.

Supply & fixing Angular stop cocks with wall flange with 7 years warranty: Chrome plated etc., complete

Supply and fixing of Round Jali UPVC / SWR Pipe fittings, including cost and conveyance of materials, labour charges etc., complete. (BMW-G-121)

Supply and fixing of 110mm Nahany Trap, including cost and conveyance of all materials and labour charges etc., complete for finished item of work.

Supply and fixing of 31.75mm dia PVC flexible waste pipe of 914.4mm length of 1st quality, including cost and conveyance of materials, labour charges etc., complete. (BMW-G-05)

Dadooing with decorated white back ground glazed tiles, set over base coat of cement mortar (1:6), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials

P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, Centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work

Flooring with ceramic tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials.

Supply and Fixing of 110mm dia PVC Pipe 4kg/cm2, including cost and coveyance of all materials and all labour charges etc., complete.

Supply and Fixing of 75mm dia PVC Pipe 4kg/cm2, including cost and coveyance of all materials and all labour charges etc., complete.

Supply and Fixing of CP Short body bibcock fancy type deluxe heavy duty 12.7mm dia Indian make, including cost and coveyance of all materials and all labour charges etc., complete.(BMW-E-22)

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work