SPECIAL REPAIRS TO ROAD AND PATH HARSHAN ENCLAVE, 260 FD WKSP AT PANGODE MIL STN UNDER GE (ARMY) TRIVANDRUM

M&L for repair to potholes any depth, not exceeding 1 Sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed.

M&L for premix bituminous, macadam (75 mm consolidated thickness or less) with binder (Paving bitumen of VG-30) content at 4% by weight of total mix, laid/ rolled and compacted with 8 to 12 tonne power roller to required gradient and camber including use of mechanical paver complete all as specified and directed.

M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming/ tack coat with bituminous primer at 5 Kg per 10 Sq metre using paving bitumen VG-30 complete all as specified and directed.

M&L for bituminous premix semi-dense asphaltic concrete 40mm consolidated thickness with 5.5% binder content using paving bitumen VG-30 by weight of total mix, rolled and compacted to required camber and gradient with 8 to 10 tonne capacity power roller complete all as specified and directed.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA strip lens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions including taking out old cat eye reflector complete all as specified and directed.

M&L for applying road marking paint with reflective thermostatic white road marking paint either continuous or broken lines over existing or new painting surfaces of cement or bituminous surface, laid down through road marking machine using thermostatic material by incorporating the white glass powder for reflectively in width not exceeding 10 cm in white or golden yellow colour by using applicator machine fitted with profile shoe, glass beds dispenser, propane tank heater and profile shoe heater including cleaning the road surface of all dirt, seals, oil grease and foreign material etc complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons etc. complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and removing debris outside MD land complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking coloured paver block any shape and size conforming to IS 15658-2006 of 80mm thickness, M-40 Grade with grey cement and pigment complete all as specified and directed.

M&L for machine pressed precast concrete interlocking coloured paver block any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed.