COMPREHENSIVE MAINT OF CENTRAL INSTITUTE ZONE A AREA UNDER GE (A) AHMEDABAD

Amount

Notes : (i) The work consists of 01 job as under:- JOB (A) : MAINT GRANT 2025-2026 (ii) Please refer schedule 'A' notes before quoting the tender. (iii) Amount of Schedule of Credit shall be deducted off line by the department.

Dismatling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings incl ridge etc.complete all as specified and directed.

Dismatling of Plain or corrugated steel sheeting, any guage , thickness including Nainital or similar pattern roof covering incl ridge etc.complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

M & L for Non - skid Ceramic tiles coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl and over screed bed or beeding layers of mortar 15mm thick in CM 1:6 in floors, complete all as specified and directed. complete all as specified and directed.

M&L for Glazed ceramic tiles coloured (300x450mm) x 7mm thick, on wall dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:4) complete all as specified

M & L for vitrified ceramic tile, light shade flooring of size of tile 600x600x8-10mm thick as in floor, set and jointed in neat cement slurry and pointed in coloured cement to match the suraface over and including screed bed or bedding layer 15mm thick in cement mortar 1:4 including roughening of old surface complete all as specified and directed.

M & L for coloured double charged Virified Ceramic tiles Dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchover and including screed bed or bedding layer 15mm thick in cement mortar 1:4 including roughening of old surface complete all as specified and directed.

M & L for vitrified ceramic tile, light shade of size 600x600x8-10mm thick as in skriting set and jointed in neat cement slurry and pointed in coloured cement to match the suraface over and including 10 mm thick rendering in CM 1:4 complete all as specified and direceted.

Taking up or down steel tubing and connections of any description and from any position incl cleaning for refixing or removing from site.

15mm bore of pipe

20mm bore of pipe

S&F bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed.

15mm bore of pipe

20mm bore of pipe

S&F Unplasticised PVC pipes of pressure rating 10 Kgf/cm2 fixed complete to walls, ceilings or in floors etc, any type of pipe. Complete all as specified and directed.

15mm bore of pipe

20mm bore of pipe

Cutting chases of brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends for concealed water tubing etc and making good, cutting exceeding 10cm but not exc 20 cm girth.

S&F in repair ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe 20mm bore (Minimum weight 210 gms) complete all as specified and directed.

S&F in repairs bib taps 15mm bore of cast copper alloy chromium plated fancy type, screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed.

S&F in repair 15 mm dia bore pillar taps cast copper alloy with capstan heads chromium plated fixed in repairs 15mm bore fancy type screwed down, high pressure with long screwed shanks and fly nuts, screwed down for iron pipe or for union.

S&F in repair stop/angle valve cast copper alloy screwed down high pressure with crutch or butterfly handle for pipe of 15mm/20mm bore complete all as specified and directed.

S & F in repairs 32 mm bore Brass chromium plated Waste coupling for wash basin with inlet and outlet screwed for pipe or connections includding necessary packing, union and cap and fixed complete all as specified and directed.

S&F in repair 10 litres PVC valveless, syphonic action type flushing cistern, with inlet ball valve, float and handleincloding brackets and PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified

S&F in repair Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 litres capacity hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F in repair Rotational moulded polyethylene Water storage tanks (cylindrical vertical with closed top) 1000 litres capacity hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed

S&F in repair PVC lids for water storage tank of cap 500 Litres/1000 Litres complete all as specified and directed .

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes ; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting unions to pipe, overall size 495mmX420mm bowl size 410mmX330mmX160mm.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples all as specified and directed by Engineer in Charge

S&F in repair Floor door stopper 150mm of amuminium alloy body and tongue, nodised, with dard drawn steel spring all as directed fixed in repairs.

S&F in repair vitreous china squatting pan, Orissa pattern, size 580 x 440 mm white with integral foot rests and connection with cast iron P trap and to flushing pipe, anti syphonage pipe etc (excluding flushing cistern and flush pipe) complete with provision of lime concrete bedding including taking down/ Dismantling existing unserviceable WC of any description and in any position & fixing new WC in repair and making good the disturbed surfaces to match with existing surfaces complete all as specified and directed.

S & F in repair vitreous china wash basin, white flat back , size 550mmx450mm with and including Waste fittings, brass, chromium plated for basins with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed with and including Supplying and fixing cast copper alloy chromium plated fancy type pillar tap 15mm bore, screwed down high pressure with or without lettered hot or cold with long shanks, screwed for iron pipe complete all as specified and directed.

S&F in repair vitreous china Wash down water closet (pedestal pattern), complete including Pedestal pan and trap and seat cover, including connection to drain ( or outgoing pipe) and flushing pipe, antisyphonage pipes etc (excluding flushing cistern and flush pipe) complete

S &F in repairs wash (Cascade type) down water closet (wall hung type) with seat cover of Jaquar florentine or equivalent Jaquar catalog No ONS - WHT-10953BIUFSM(inclusive of brackets) to pedestral pan including all joints, trapets complete all as specified and directed.

S&F in repair PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumised hanging device complete all as directed.

S&F for 19/20 mm harrison rail/curtain rails stainless steel chromium plated with fixing brackets stops fixed in repairs.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L Granite slab work 18-20mm thick in floors steps,riser,wall cladding, cooking platforms and like including pointing in white cement with admixture of pigment to match with granite shade over & including screed bed 15mm thick in CM 1:6 including cutting recess opening for the sink portion and embedding complete all as specified and directed by Engineer-in-Charge. (Note : No deduction shall be made for opening of sink portion, shall deemed to be included in the quoted rate)

Taking down chowkats or frame with shutters (without taking off shutters from the frame) n exc 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm and n exc 4.0 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but n exc 2.0 Sqm complete all as specified adnd directed.

Taking down shutter resecuring, easing and cutting refixing in the same opening shutters of any description exc 1 Sqm and not exc 2 Sqm complete all as specified and directed.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides incl decorative laminated sheet on both faces.

S&F factory made 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated sash members, any numbers and mited beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20(a) supplied and fitted to chowkats

S & F stainless steel wire cloth 0.36 nominal dia wire & average width of aperature 1.40 mm fixed with stainless steel wire staples complete all as specified and directed

Preparation of new or previously untreated wooden surfaces of any description, not otherwise, described, over 10cm width or girth and applying two coats of synthetic enamal paint over a coat of pink primer complete all as specified.

M & L for preparation of old painted wooden : surfaces of any description postion and location not otherwise described over 10cms width or girth and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified and directed

M&L for preparation of new or previously untreated surfaces and applying two coat of synthetic enamel paint (ordinary tint) over a coat of red oxide primer on steel surfaces, complete all as specified and directed

M&L for preparation of old painted surfaces and applying one coat of synthetic enamel paint (ordinary tint) on steel surfaces, complete all as specified and directed

S&F for butt hinges 100mm size medium weight aluminum anodised complete all as specified and directed.

M&L for 150mm long extructed aluminium handle fabricated type complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt of extruded section 200 mm size complete all as specified and directed.

S&F aluminium alloy anodised sliding door bolt with hasp and stapple (bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section 300mm length & dia not less than 12mm with & including 6 Nos of bolts complete all as specified and directed.

S&F factory made single extruded WPC (wood polymer composite) solid door/ window/Ceosetory windows & other frames/chowkat of size 45x70mm comprising of virgin PVC polymer of K value 58-60 (suspension Grade), calcium carbonate and natural fibres (wood power/ rice husk/ wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100 gms fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS Screws having minimum frame density of 750 kg/ cum , screw withdrawl strenth of 2200N face & 1100 N (Edge) minimum compressive strength of 58 N/mm2 moudules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer -in- Charge Note :- for WPC solid door/ window frames minus 5mm tolerance in dimension ie depth and width of profile shall be made

All as above item 1.56 but to frame size 65x100mm. Complete all as specfied directed

Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

All as above item 1.58 but 35mm thick complete all as specified and directed.

S&F Aluminium powder coated door frame of size 100 x 44 x 1.98mm thick with one or more rebates and shutters pull and push type or side hung type (with or without aluminium sash bars) comprising of top & lock rails of section 115 x 44 x 1.98 mm thick, botom rail of section 150 x 44 x 1.98mm thick and stiles of section 85 X 44mm X 1.98mm thick including necessary jointing cleat, glazing clip, rubber packing anodized aluminium beading, screws, anodized aluminium fittings such as floor spring or hinges 100mm size with hydraulic door closer, handles 'D' type 125mm, floor door stoppers, tower bolt 200 mm, sliding door bolt 300 mm or mortice lock,hydraulic door closer with 5mm thick tinted glass / preleminated particle board (Novapan) panel and making good of wall surface to match existing surface complete all as specified Note :- Rates include all glazing/aluminium wire cloth, rubber packing, jointing cleats, glazing clips, aluminium snap beading, locking arrangements, handle etc

S&F 3 Track aluminium powder coated window frame consisting of 92x31.75x1.5mm thick sliding track size and size of window shutter should not be less than 40x10x1.5mm thick and two shutters will be fitted with 5mm thick tinted glass and one shutter with S.S wire clothes and all the window frame will be fixed in the opening as window above 92x36x1.5mm thick aluminum section including necessery rubber packing complete all as specified and as directed Note :Rates include all glazing/Stainless steel wire cloth, rubber packing, jointing cleats, glazing clips, aluminium snap beading, locking arrangements, handle etc

S & F aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass including necessary channel frame work, including rubber gasket and frame with wire mesh of aluminium,and deco grill ,aluminium beading complete all as specified and as directed.

S&F for butt hinges 100mm size medium weight stainless steel .

S&F 150 mm size fancy type SS handles,door handles complete all as specified and directed.

M&L for 300mm long SS Aldrop, to fixed with all the ftittings and fixture etc. complete all as specifed and directed.

Dismantling wall and ceiling boards any thickness including cover fillets complete all as specified and directed.

S&F Tee grid suspension system of size 600 mm x 600 mm type-1 made out of roll framed hot dipped galvanised steel zince coated of not less than 120 gm/Sqm, main runner 0.3 mm thick of section 24 mm x 33 mm crross runner 0.30 mm thick of section 24 mm x 25 mm, wall angle shall be 0.63 mm thick of section 24 mm x 24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod, system exposed portion shall be pre painted polyester coated in off whitee/white in colour complete with material, fixing, jointing etc., with Coloured textured designer ceiling board (Everest)/Asbestos Cement white fiber Board 4mm thick of size 595 x 595 mm fixing with screws/clips complete all as per manufacturers instructions and direction.

S&F PVC wall panelling with decorative finish / wood finish having thickness minimum 5 mm thick premium quality over supporting standard grid to rest panelling including all necessary fittings,fixtures and required aluminium/GI section of standard quality to hold false ceiling complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise as dircetd and as specified.

M&L 75mm thick PCC 1:4:8 using 40 mm graded stone aggregate as in sub base complete all as specified and directed

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;

Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete all as specified or directed.

M&L for rendering on external wall fair faces of brick work in two layers i.e., 10 mm thick in CM 1:6 and top layer of 5 mm thick in CM 1:4 mixed with water proofing compound in top layer @3% by the weight of cement or as per manufacturer's instructions finishing the surface fair and even without using extra cement complete all as specified and as directed.

M&L for 10 mm thick rendering on internal wall surfaces other than fair faces of brick/concrete surfaces in CM (1:6) and finished even and smooth without using extra cement complete all as specified and directed

M & L for 10mm thick rendering on cement concrete as in ceiling with cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed

M&L for preparation of new plastered surfaces on walls and applying two coats of cement based paint over one coat of Primer on walls complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of walls & applying two coats Oil bound distemper, white or tinted over a coat of primer surfaces of wall putty complete all as specified and directed.

M&L for preparation of new surfaces of ceiling plastered sheet and applying two coat of oil bound distemper over a coat of primer complete all as specified and directed

M&L for preparation of old decorated surface of ceilling (plastered/unplastered) by brooming down or steel wire brushing, scraping down smoke, soot moulds, moass and effloroscent salts trading oil and greasy spots and applying one coat of oil bound distember on ceilings.

M&L for preparation for old decoratived surfaces of walls and applying one coat of oil bound distemper on walls complete all as specified and directed

M&L for preparation for old decoratived surfaces of walls and applying one coat of cement base paint on walls complete all as specified and dircted.

Material & Labour for complete removal of existing treatment on wall surfaces applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. Complete all as specified and directed

M&L for complete removal of existing treatment on wall and applying two coats of plastic emulsion paint with anti algal properties (Apex ultima or equivalent) with white wall care putty on over one coat of primer on walls complete all as specfied and directed

M&L for preparation of old painted surfaces on walls and applying two coats of plastic emulsion paint with over one coat of primer complete all as specified and directed

S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed

S&F designer false ceiling made of 12mm thick gypsum board of saint Gobin or equivalent over and including all GI grid of standard quality to hold false ceiling including two coats of plastic interior emulsion of any colour over one coat of primer and two coats of acrylic putty complete all as specified and directed

Demolition of Brick work or stone/boulder masonry, build in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed.

M&L Brickwork with old size sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in In CM (1:4) complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty & pins/spring pins complete in squares n.exc 0.50 sqm each pane complete all as specified and directed

S&F 3mm thick frosted glass panes and glazing with oil putty & pins/spring pins complete in squares n.exc 0.50 sqm each panes complete all as specified and directed

Dismantling structural steel work including doors, gates,but excluding framed truss etc. complete all as specified and directed.

S&F Mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed

S&F Rolled sections as in Purlin ,rafter ,main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plate conforming to Fe – 410 W Grade – E 250 complete all as specified and directed.

S&F mild steel tubular / rectangluar section as in coloumn, posts, raffetrs beams gasset plate and struts embedding in concrete , and screwing Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. Fe – 290 Grade – E 165 complete all as specified and directed.

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified.

S&F in repairs shower rose 150 mm dia/square of brass chromium plated fancy type with or without swivel joint suitable for fixing to 15mm bore GI pipe complete all as specified and directed.

S&F in repair health faucet with one meter tube and hook complete all as specified and directed

S & F in repair 15mm size PVC connections with PTMT nuts of length 450mm and fixed in repairs complete all as specified and directed.

S/F grating doom 150 mm size of Stainless Steel (Minimum weight 100 gms) complete all as specified and directed.

Taking down CI/PVC/AC soil pipe with fittings from wall, treches of any description including fittings.

S & F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors incl fittings and fixtures like bend , elbow,tee etc.complete all as specified and directed.

S & F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls incl incl fittings and fixtures like bend , elbow, Y(equal or unequal),tee etc.complete all as specified and directed.

S&F in repairs 75mm bore for PVC (SWR) pipes single socketed in any length with rubber joints, laid in trenches or in floor complete all as specified and directed.

S&F in repairs 75mm bore for PVC (SWR) floor trap, plain with grating including jointing with solvent cement including jointing with solvent cement..complete all as specified and directed.

S & F in repairs , 2 way bib cock , fixed in 15mm bore pipe of of Jaquar cat part no QQT-7041 or equivalent complete all as specified and directed

S & F in repairs for wash basin mixer for mixing hot and cold water screwed down for iron pipe & fixed 15mm dia bore pipe of Jaquar Make catalog no QQT-7167B or equivalent complete all as speceified and directed

S & F in repairs Wall mixer double lever arm kit of Hi flow Divertor consisting of operating lever wall flange with seat and button only mixing hot and cold water screwed down for iron pipe & fixed 15mm dia bore of pipe of Jaquar make CATALOG NO QQT-7273UPR Complete all as specified and directed

Complete removal of existing water proofing treatment with washing and brushing and removal of all bushes and algaes and after drying surface providing & applying first coat of acrylic polymer based elastomeric water proofing chemical coating and after drying of 1st coat applying fiber mesh and agrain applying 2nd coat of acrylic polymer based elastomeric water proofing coating application of of both coat of chemical should't be less than 1 kg/Sqm complete all as specified and directed as Engr-in-Charge.

M&L for cleaning of 1000 litre PVC Rotational moulded polyethylene Water storage tanks by empty the tank completely use mild detergent of tank cleaning solution, to scrub the inside of the tank, rinse the tank thoroughly to remove any residue, Use a disinfectant like bleaching powder or calcium hypochlorite to kill bacteria and other microorganisms and finaly Rinse the tank again to remove any remaining bleach complete all as specified and directed.

M&L for cleaning of 500 litre PVC Rotational moulded polyethylene Water storage tanks by empty the tank completely use mild detergent of tank cleaning solution, to scrub the inside of the tank, rinse the tank thoroughly to remove any residue, Use a disinfectant like bleaching powder or calcium hypochlorite to kill bacteria and other microorganisms and finaly Rinse the tank again to remove any remaining bleach complete all as specified and directed.

S&F stainless steel kitchen plate rack, 1 mm thick of size 900 mm x 780 mm x 222 mm fixed to wall in repairs with brass screws complete all as specified and directed.

S & F in repairs single towel rail of 600 mm lomg of Jaquar cat part no aqn -7711 or equivalent complete all as specified and directed

S & F in repairs soap dish of Jaquar cat part no AKP-35731P or equivalent complete all as speified and directed

S & F in repair Glass corner self fancy type 250x250 and 10mm thick fixed its brass bracket and screwed complete all as specified and directed. Make : Jaguar Cat No 7771 or equivalent of Marc/ESS

S & F in repair PVC coloured bath cabinet overall size 560 x 410mm decorative design with looking mirror including all fittings complete all as specified and directed. Make :- Prayag or Equivalent

S&F in repairs door closer aluminum (extruded section body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repairs Mortice lock verticale type size 100mm aluminum 4 levers include for escutcheon plates and two keys complete all as specified and directed.

Taking down and refixing of aluminum partition in same position including builder hardware if any complete all as specified and directed

Taking down and refixing of aluminum door of any size and refixing in same or any other opening including builder hardware if any complete all as specified and directed

S&F aluminum anodised section size 100x44x1.48mm for partition all other members channel tracks including gasket aluminum cleat 6mm dia rounded bars, 5mm thick tinted glass panes top and prelaminated particale board bottoms including aluminum handle hinges and locking arrangement sliding rail, rollers etc. complete all as specfied and directed

S&F glass door made of 12mm thick toughned glass with all fittings arrangement incl hydraulic type door closer, glass round handle , locking arrangement and all necessary fittings and fixtures complete all as specified and as directed.

Taking down carefully copper / aluminium point wiring (light, fan socket or power) through steel / PVC conduit / casing caping including complete fittings such as switches, ceiling roses, pendants, regulators, sockets, buzzer, bell, switch sockets, etc removing and making good to the disturbed surfaces of walls/ceiling etc, with its original specification complete all as specified and directed.

M & L for point wiring concealed with 1.5 sqmm (nominal area) PVC insulated and unsheathed multistranded FRLS copper conductor cable (using colour code as per IS), 1100 volts grade drawn through and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked with all accessories and terminated in modular sunken boxes (concealed in wall) for mounting switches, sockets, fan regulators, etc including 1.5 sqmm size PVC insulated, unsheathed, multistranded FRLS copper conductor cable for continuous earth conductor and connecting to earth all as specified and as directed. Note- i) The cost of cutting chases in stone /brick masonary and making good disturbed surfaces using cement mortar (1:3) shall deemed to be included in quoted rate. ii) Colour coding shall be folowed as (i) Phase- Red/Yellow/Blue (ii) Neutral - Black (iii) Earth - green.

One light point controlled by one switch.

One fan point /Exhaust fan point controlled by one switch.

One light point controlled by two, two way switches.

One socket outlet 6 amp controlled by one switch on the same board with other switches.

One socket outlet 6 amp controlled by one switch on indepdendent board.

One bell point controlled by one bell push.

M & L for point wiring PVC concealed conduit with 2.5 Sqmm (nominal area) PVC insulated and unsheathed multistranded FRLS copper conductor cable (using colour code as per IS), 1100 volts grade drawn through and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked with all accessories and terminated in modular sunken boxes (concealed in wall) for mounting switches, sockets etc including 2.5 Sqmm size PVC insulated, unsheathed, multistranded FRLS copper conductor cable for continuous earth conductor and connecting to earth dolly for one socket point 16 Amp controlled by one switch. Note- i) The cost of cutting chases in stone /brick masonary and making good disturbed surfaces using cement mortar (1:3) shall deemed to be included in quoted rate. ii) Colour coding shall be folowed as (i) Phase- Red/Yellow/Blue (ii) Neutral - Black (iii) Earth - green.

M & L for point wiring PVC casing caping with 1.5 sqmm (nominal area) PVC insulated and unsheathed multistranded FRLS copper conductor cable ISI marked 1100 volts grade drawn through and including wide PVC casing caping (ISI marked) with all accessories and terminated in and including PVC surface mounted modular box with modular cover plate and frame of sutable size and module including 1.5 sqmm size PVC insulated, unsheathed, multistranded FRLS copper conductor cable ISI marked for continuous earth conductor and connecting to earth dolly for the following :- Note: Colour coding shall be folowed as (i) Phase- Red/Yellow/Blue (ii) Neutral - Black (iii) Earth - green

One light point controlled by one switch.

One fan point /Exhaust fan point controlled by one switch.

One light point controlled by two, two way switches.

One socket outlet 6 amp controlled by one switch on the same board with other switches.

One socket outlet 6 amp controlled by one switch on indepdendent board.

One bell point controlled by one bell push.

M & L for point wiring PVC casing caping with 2.5 Ssqmm (nominal area) PVC insulated and unsheathed multistranded FRLS copper conductor cable (using colour code as per IS), 1100 volts grade drawn through and including concealed rigid non metallic PVC casing caping medium grade not less than 20 mm dia ISI marked with all accessories and terminated in modular sunken boxes (concealed in wall) for mounting switches, sockets etc including 2.5 Sqmm size PVC insulated, unsheathed, multistranded FRLS copper conductor cable for continuous earth conductor and connecting to earth dolly for one socket point 16 Amp controlled by one switch. Note- i) The cost of cutting chases in stone /brick masonary and making good disturbed surfaces using cement mortar (1:3) shall deemed to be included in quoted rate. ii) Colour coding shall be folowed as (i) Phase- Red/Yellow/Blue (ii) Neutral - Black (iii) Earth - green.

S&F modular switch one way 6 amp 1 module complete all as required at site or directed by Engr -In- Charge

S&F modular switch one way 16 amp 1 module complete all as required at site or directed by Engr -In- Charge.

S&FModular switch 2 way 6A, 1 module complete all as specified and directed.

S&F modular bell push, 6 amp, 1 module complete all as required at site or directed by Engr -In- Charge.

S&F door bell, Multi Music type AC, 240 volts, single pole complete all as required at site or directed by Engr -In- Charge.

S&F modular socket 6/16 - 3 pin 2 module (Twin socket) complete all as required at site or directed by Engr -In- Charge.

S&F modular socket 6 amp 3 pin 2 module (with shutter) complete all as required at site or directed by Engr -In- Charge.

S&F modular hum free electronic step fan regulator, 120 watt 2 module complete all as required at site or directed by Engr -In- Charge.

S & F in repair Ceiling rose, 3 Terminal/PVC/polycarbonate, isolated body complete all as specified and directed.

Taking down carefully aluminium or copper submain wiring with PVC casing caping / PVC surface conduit and making good disturbed surfaces complete all as specified and directed.

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FR-LS multistranded copper conductor cable (Phase - R,Y,B, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked along with accessories of following nominal sizes complete all as specified and directed.

2x4 sqmm + 1x4 sqmm earth wire in 20 mm dia conduit.

2x6 sqmm + 1x6 sqmm earth wire in 25 mm dia conduit.

Taking down old u/s light fitting of any type, any make and any capacity after disconnecting complete all as specified and directed.

Supply and fixing of LED light fitting 1x20W made out of pressure die cast aluminium housing and IP20 protection, PF > 0.95 , 100 Lumen/watt , CRI> 80, driver efficiency > 85% including electric connections all as specified and directed with fwg specifications Make - Havells /Bajaj/Wipro/Crompton/Halonix:- (a) Main Housing : Aluminium Extruded (b) Front Cover : PC (c) LED : LM 80 Certified LED (d) Lumen Maintenance : 50000 hours @ L70 (e) Control Gear : Electronic, CC Driver (f) Internal Wiring : Insulated Copper wire (g) Hardwares : SS & MS Zinc plated and passivated

Supply and fixing of LED light fitting 1x10W made out of pressure die cast aluminium housing and IP20 protection, PF > 0.95 , 100 Lumen/watt , CRI> 80, driver efficiency > 85% including electric connections all as specified and directed with fwg specifications Make - Havells /Bajaj/Wipro/Crompton/Halonix:- (a) Main Housing : Aluminium Extruded (b) Front Cover : PC (c) LED : LM 80 Certified LED (d) Lumen Maintenance : 50000 hours @ L70 (e) Control Gear : Electronic, CC Driver (f) Internal Wiring : Insulated Copper wire (g) Hardwares : SS & MS Zinc plated and passivated

S&F in repair energy efficient LED 2x2 edge-lit luminaire suitable for armstrong/grid ceiling complete for low ceiling applications with flat diffuser as per make Halonix Cat No (HLFPR22-27-36-CQ-HL2) and LED Driver with driver efficiency >=85%, lumen output of 6500K lumens having power factor >- 0.95 constant current electronic drivers duly connected with 1 sqmm with insulated & sheathed three core flexible multistranded copper conductor cable having open & short circuit protection, reverse polarity protection and surge protection of 4KV internal. equvivalent in Philips/Wipro.complete all as specified and directed. Note: Module + Driver both should be ordered.

S&F LED Lamp 14 watt, 230 volts, 180 lumen/watt, with 5 star complete all as specififed and directed.

S&F LED Lamp 18 watt, 230 volts, 180 lumen/watt, with 5 star complete all as specififed and directed.

Supply & fixing of 15W/ Mtr LED Strip for cove lighting complete with driver & in all respect including testing & commissioning on completion as per make Havells Cat No. LHEHCPPGNN1B024 PROFESSIONAL LED strip IP-65 WH White or techno comeercial equvivalent in Philips/Wipro.

S&F in 3 in 1 Wave Colour Changing Panel Circular LED light fitting including fixing arrangement on wall with suitable size for fitting capacity of LED 15 watt, complete all as specified and directed

S&F in Wall LED light fitting including fixing arrangement on wall with suitable size of GI pipe bend into shape, clamps and nut & bolts for fitting capacity of LED 30 watt, with pressure diecast aluminum housing & polycarbonate having top opening seperate driver compartment with IP66 protection and impact resistance IK07 duly prewired connection complete all as directed.

Supply and fixing post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

S&F Power unit for AC or geyser 3.5 KW 4 module including sunken modular GI metal boxes not less than 1.2 mm thick and white modular mounting plates with frame complete all as specified and directed.

Taking down MCB distribution boards with incoming and outgoing controls any make, any capacity after disconnecting complete all as specified and directed.

Supply & Fixing for sheet double door metal enclosure MCB distribution board, double door with IP43 -IK09 protection single phase 240 volts 4 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification

S&F MCB distribution board SPN, 240 volts, 8 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

Supply & Fixing for sheet metal enclosure MCB distribution board, double door with IP43 -IK09protection single phase 240 volts 12 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification

S & F Distribution board (ETPN)iron clad, double door with IP-54 1K-09 protection suitable for MCC TP as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar and neutral link complete Including with one MCB TP 3 pole 415 Volts 63 Amps rating with rupturing cap 16 KA of the same make as of distribution board & including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge (Outgoing MCB will be measured separately).

S&F tripple pole and neutral, powder coated, CRCA steel sheet Vertical bus bar distribution board (VTPN) constructed as per IEC-61439-3 , IP-54 IK-09 suitable for 4P MCCB incomer upto 125 amp, 4 way, 415 volts, degree of protection IP 43 with metal door, recess mounted, having 200 amp insulated tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces etc as required.

S&F MCCB 125A 4 Pole suitable for MCB DB complete all as specified and directed.

S&F MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-

Single pole 6 to 32 amp.

Double pole 6 to 32 amp.

Four pole 32 to 63 Amp

Taking down fan, any size any make from various satellite area locations, for repair/replacement of defective parts and rehanging/refixing in its original location after reconditioning complete as specified and directed for Cieling fan of size 1200/1400 mm sweep, wall fan/Exhaust fan upto 450mm sweep. Note:- Items for reconditioning will be measured and paid separately under respective items of BOQ.

Material and labour for Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. complete all as specified and directed.

All as per item No 2.80 but for wall fan/Exhaust fan upto 450 mm sweep.

M&L for removing the burnt out winding, cleaning slots, rewinding the motor with super enamelled copper wire of equivalent size to the original winding including warnishing, drying etc replacement of body screws, testing and commissioning on full load for 8 hours continous runing for Ceiling fan 1200/1400mm sweep complete.

All as per item No 2.82 but for wall fan/Exhaust fan/Pedestal fan upto 450 mm sweep.

Supply and replace capacitor 2.5/3.15/4 mfd, 240 volts, AC suitable for fans etc.

Supply and replace ball bearing made out of high carbon steel as per existing suitable for Ceiling fan any type any size.

Supply and replace bush bearing made out of brass alloy as per existing suitable for Ceiling fan any type any size.

Supply and replace bakelite body nichrome connectors, 2 way with fixing screws of suitable size for ceiling fans any type any size including dismantling old one complete all as specified and directed.

Supply and replace 1100 volts grade PVC flexible twisted twin core cable with multistranded coppr conductor of size 23/0.0076 all as specified

Earthing complete with galvanised steel earth plate electrode 600 ×600 × 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion

S&F RCCB/ELCB (as required at site) for Earth Leakage Protection of 30mA, 63A, Having braking capacity 10KA, ISI marked including required wiring connections with copper lugs of suitable size provided in circuit braker DBs.

S&F Voltage Circuit Breaker for under voltage and Over Voltage Protection, over current, of 63A rating, having breaking capacity 10KA, with adjustable setting and digital display, including required wiring connections with copper lugs of suitable size provided in Circuit Breaker DBs.

S&F Voltage Circuit Breaker for under voltage and Over Voltage Surges, 275/320V (as required at site) of 100A rating having breaking capacity 20KA, with adjustable settting and digital display, including required wiring connections with copper lugs of suitable size provided in Circuit Braker DBs

DMA PROJECTS (BID ID -3336752)