SPECIAL REPAIR TO BLDG NO T-13 AND T-14 F SINGLE JCOs LIVING ACCN T-14 JCOs CLUB MESS AND T-33 SPWD ATG STORE AT HAWS GULMARG UNDER GE 969 EWS

Amount

Demolition of cement concrete pavings n.exc 15cm (unreinforced) in ground floors and depth (below or above ground level) complete all as specified.

M&L 75mm thick PCC 1:3:6, type C-2, (40mm graded aggregate) as in plinth protection and similar works including finishing the surface of concrete topping even and fair, without using extra cement complete all as specified.

M&L for 75mm thick PCC type 1:4:8, type D-2 (using 40mm graded aggregtate) as in sub base floors complete all as specified and directed.

M&L for 25mm thick PCC type 1:2:4, type B-0 (using 12.5mm graded aggregtate) as in leveling coarse complete all as specified and directed.

S&F chequerred cement concrete tiles 30cmx30cmx25mm thick, with grey cement and pigments, set jointed and pointed in neet cement slurry in floors including screed bed 15mm thick complete in CM 1:6 complete all as specified and directed.

Demolition of brick work or stone masonery of any type built in cement mortor in foul condtion etc complete all as specified

M&L Brick work with sub class 'B' bricks (old size bricks) straight on curved on plan exc 6 M mean radius built in CM 1:4 complete all as specified.

M&L Brick work with sub class 'B bricks, straight or curved on plan any radius in half brick thick wall with old size bricks built in cement mortar 1:4 complete all as specified.

Dismantling wall and ceiling boards (Fibre, pulp, insulation etc) and boarding any thickness including cover fillets complete complete all as specified and directed.

M&L for 6mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face has decorative veneer fixed with nails to timber frame work in partition, wall panelling etc. complete all as specified.

M&L for 6mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face has decorative veneer fixed with nails to timber frame work in ceiling etc. complete all as specified.

S&F second class softwood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exc 6 Sqcm and n.exc 13 Sqcm complete all as specified and directed.

S&F second class softwood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exc 13 sqcm and n.exc 25 Sqcm complete all as specified and directed.

Dismantling boarding, any description fixed in any position with nails complete all as specified.

S&F second class softwood weather boarding, clean sawn, plain, 20mm thick or feather edged 15mm to 20mm thick and fixed with 30mm laps complete all as specified.

S&F second class softwood 20mm thick facia boarding fixed with nails in any situation planed one side with butt joints complete all as Specified.

S&F second class softwood boarding in floor and skirting 40mm thick planed one side with butt joint and fixed with nails for repair to existing floor in patches etc complete all as specified.

All as per item 17 above but except boarding fixed with nails.

Dismantling of plain or corrugated steel sheeting, any gauge and thickness in roof covering including Nainital or similar pattern roof covering complete all as specified.

S&F Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating Gl based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified and directed.

Taking down cement plaster on brick work or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified.

M&L for rendering 15mm thick cement plaster in CM 1:4 on fair faces of brick or concrete surfaces on walls and finished surfaces even and smooth without using extra cement using water proofing compound 3% by weight of cement complete all as specified. (Note: Water proofing compound to be measured and paid seperately).

Supply only integral waterproofing compound.

Dismantling timber scantling 40 Sqcm and over in section in any position framed work.

M&L second class hard wood clean sawn as in scantling in framed work.

All as per srl item no 26 above but except timber only

Taking down chowkats or frames but with shutters (without taking off shutters from the franme) not exc 1.50 Sqm and removal from site all as Specified and directed

Taking down chowkats or frames but with shutters (without taking off shutters from the frame) exceed 1.5 Sqm and not exceed 4.00 sqm.

S&F 2nd Class softwood plain, solid straight chowkats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joint all as specified and directed.

S&F 2 class soft wood 35mm thick factory made panelled shutters with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Pt-1) kiln seasoned and chemically pressure treated.

S&F 2nd class soft wood 30mm thick skelton shutters open rebated and prepared to receive etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beeds for securing glass etc and fitted to chowkats size of members of shutters as specified in SSR Part I Section 8 Clause 8.24 (b) for windows ventilators etc are provided with stiles and rails complete all as specified.

MS Cold rolled butt hinges medium weight 100mm long complete all as specified.

MS Cold rolled butt hinges medium weight 75mm long complete all as specified.

S&F 300mm long aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all specified.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified.

S&F 150mm long extruded, aluminium alloy handles, fabricated type anodised and fixed complete all as specified.

S&F 100mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified.

S&F 100mm long extruded, aluminium alloy handles, fabricated type anodised and fixed complete all as specified.

M&L sheet glass ordinary quality 3.00 mm thick and glazing with oil putty in square n exc 0.50 sqm in each panes fixed to steel or wooden window frames complete all as specified.

Preparation of new plastered surfaces of walls and applying two coats of Cement Base Paint of approved tint, complete all as specified.

Complete removal of existing treatment of walls and applying two coat of Cement Base Paint of approved tint, complete all as specified.

Prepartion of new or previously untreated surfaces of wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer all as specified.

Prepartion of old painted surfaces of wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint all as specified.

S/F pvc door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as perspecification and drawing sown in SSR Part II , complete all as specified.

S/F factory made solid PVC moulded door shutter 28 to 30 mm thk (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C channe having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as shown in drawing of relevant item in complete all as specified. MES, schedule Part ll, 2020 as specified.

M&L non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exc 0.06 Sqm but n.exc 0.11 Sqm in floors set and jointed over cement screed base of 15mm screed bed in CM 1:6 and pointed in white or coloured cement to match complete all as specified.

M&L glazed coloured ceramic coloured tiles in vertical surface 300x450x7mm thick set and jointed in neat cement slury and pointed in white or coloured cement to match complete including rendering 10mm thick in cement mortar 1:4

Taking down or up 15mm bore Gl tubing including cleaning for refixing or removal to store etc.

Taking down or up 20mm bore GI tubing including cleaning for refixing or removal to store etc.

S&F 15mm bore medium graded GI tubing with ali fittings and fixed complete to wall and ceiling or laid in trenches complete all as specified.

S&F 20mm bore medium graded Gl tubing with all fittings and fixed complete to wall and ceiling or laid in trenches complete all as specified.

S&F vitreous china wash hand basin with pedestal, white, flat back size 550x400mm excluding tap, chain, plug but including brackets and cutting for providing ends of brackets fixed in repair complete all as Specified.

S&F in repairs 15mm bore angle stop valve cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed all as specified.

S&F 15mm dia bore chromium plated fancy type pillar tap screwed down high pressure with or without lettered Hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified.

Demolition and breaking up 150mm internal dia of drain pipes (SGSW, AC or Re-inforced concrete) set in cement laid in trenches incl all fittings & accessories complete all as specified.

M&L Salt glazed stone ware (drain pipe) laid in trenches and jointed as specified of 150mm dia complete all as specified.

M&L for concrete bed to drain pipes in PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate including packing under haunching against the sides of pipe after they are laid and tested for 150mm dia. complete all as specified.

M &L for 100mm dia (internal) SGSW pipes laid in trenches & jointed complete all as specified.

S&F 110mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint laid in trenches or in floors etc complete all as specified.

M&L PCC 1:3:6 type C-2 concret bed using 40mm graded stone agg to drain pipe including packing under & haunching against the sides of pipe 100 mm dia (internal) after these are laid in trenches complete all specified.

Cutting in to existing manhaoles for connecting new drains, making good to pipe and rendering, cutting out existing benching for as specified dia of pipe 150mm complete all as specified.

Taking down pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc. complete all as specified.

S&F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls etc complete all as specified.

S & F 75 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls etc complete all as specified.

S&F 110 mm bore PVC (SWR) Bends with accesss door etc complete all as specified.

S&F 75 mm bore PVC (SWR) Bends complete all as specified.

S&F 110 mm bore PVC (SWR) junction single (Single T) equal of unequal complete all as specified.

S&F 75 mm bore PVC (SWR) junction single (Single T) equal of unequal complete all as specified.

M&L for 125/110 mm PVC (SWR) trap setting and jointed with solvent cement complete all as specified.

M&L for 75 mm PVC (SWR) floor trap setting and jointed with solvent cement complete all as specified.

S&F in repair 15 mm dia bore chromium plated bib taps, screwed for iron pipe, or for brass ferrule complete all as specified and as directed.

S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified.

Corner glass shelf assembly consisting of 5.5mm thick sheet glass with chromium plated bracket guard complete all as specified.

S&F in repair CP soap tray fixed to walls with rubber plugs complete all as specified and directed.

S&F 125mm dia grating doom with/without waste hole of PTMT (Minimum weiqht 40 gms) complete all as specified.

S&F in repair PVC connection 15 mm 450 size with PTMT nuts of length mm of approved quality complete all as specified.

S& F in repair PVC low level cistern of 10 liter capacity inclusive of brackets and PVC bend long type and connecting to flush pipe of any size and pattern with inlet ball valve float and handle complete all as specified.

S&F continous (piano) hinges of brass, bright finish or electrogalvanised 30 width of flap (When open) complete all as specified and as directed

S&F 18/19mm prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work complete all as specified.

Extra over rates of block board or veneered particle board (18/20mm) for external teek wood lipping, 6mm thick fixed with nail complete all as specified.

S&F 0.63mm thick, galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 275 grams per square metre complete all as specified.

S&F 0.80mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) with grade of zinc coating 275 grams per square metre complete all as specified.

Preparing new zinc (or galvanized) surfaces to receive painting by coating with mordant solution including washing and cleaning etc of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified.

Preparation of old painted zinc or galvanised surface of any description and in position and applying one coat of synthetic enamel paint all as specified.

M&L for complete removal of existing treatment applying a coat of chalk whiting, on plastered surfaces, preparatory to distempering and applying two coats of oil bound distemper on existing surfaces on walls.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L glazed coloured ceramic coloured tiles in vertical surface 450x350x7mm thick set and jointed in neat cement slury and pointed in white or coloured cement to match complete including rendering 10mm thick in cement mortar 1:4 complete all as specified.

M&L for machine cut kota slab flooring 20-25mm thick over20mm thick screed bed in CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

S&F 500 Ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as per specified and directed.

M&L for providing precast cement concrete type B-1, 1:2:4 (20mm graded aggregate) and set in cement mortar 1:6 in landings, cover slabs, chullah hoods, chajjas, water troughs etc complete all as specified.

M&L TMT bars 10 mm dia and over cut to length, bend to shape required including cranking, bending spirally for hookings for cols, hooking ends and binding with and including mild steel wire (anealed) not less than 0.9mm dia. complete all as specified.

M&L for 10mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes complete all as specified.

M&L non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exc 0.18Sqm but n.exc 0.38 Sqm in floors set and jointed pointed in white or coloured cement to match complete all as specified.

S&F vitreous china wash hand basin coloured with pedestal, flat back size 630x450mm excluding taps,waste chain, & plug and porcelain stopper but incl bkts waste pipe, PVC connection, 32mm CP waste coupling etc complete all as specified.

S&F 15mm dia CP Basin Mixer for mixing hot and cold water, screwed for iron pipe and fixed complete all as specified.

S&F 15mm dia bib taps chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe of size 15mm dia and conforming to IS-781-1977, complete all as specified.

S & F Viterous China Squatt pattern of pattern long pan, size 580mm white with 'P' or 'S' trap, front or back inlet and food rests and pattern including seat cover (excluding flushing cistern and flush pipe), complete all as specified.

Taking down carefully copper/aluminum point wiring (light. Fan, socket or power) complete, incl fittings such as switches. ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe Custody for reuse at site and making good disturbed surfaces of walls, floors etc. complete all as specified.

M&L for point wiring in PVC casing caping with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqm including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor.

One light point/fan point/Exhuast fan point controlled by one 5 Amps switch one way

One 3 pin 5 Amp switch socket outlet on independent board

M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated fire retardant cable of size 2.5 Sqmm as earth continuity conductor.

S&F switch piano Flush type, single pole, one way 6 amp 240 volts, complete all as specified and as directed.

S&F Socket outlet 2 in 1, 3 pin, 5 Amps, flush type complete all as specified and as directed.

S&F Switch socket combination 2 in1, 3 pin,5 Amps and 15 Amp flush type,universal complete all as specified and as directed.

S&F Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body complete all as specified.

S&F in repairs Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed.

S&F Distribution Board, SPN 12 Way, single door complete all as specified and as directed.

S&F Distribution Board, SPN 8 Way, single door complete all as specified and as directed.

Supply and fixing 240v, 10 KA B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB SPN 40 Amp complete with connection testing and commissioning.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB SPN 32 Amp complete with connection testing and commissioning.

S&F LED Lamp 15 W complete all as specified.Make: Havells cat part No : LHLDEREEMK8X015 or equivalent in approved makes.

S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as specified and as directed.

S&F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size comlpete all as specified and directed by Engineer-in-charge.

S&F Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed by Engineer-in-charge

S&F exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers, 50 Hz, RPM 1200, Copper winding complete all as specified and directed.

M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with of the top edge plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.5 of SSR 2020 part I including necessary excavation and earth work in any type of soil PCC 1:3.6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 6 mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia Gi pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note: The rate is inclusive of necessary earth work, RFR and removal etc

Note:- Schedule of credit Rs. 1,23,872.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

Javeed And Co

M/S SHEIKH FEROOZ AHMAD

M/S ALTAF HUSSAIN KHUROO

ALI MOHD NAJAR

M/S ANUSHA ENTERPRISES