Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹7.1 LAWARDED | AWARDED |
Tender Value
₹7.1 L
EMD Value
₹17,697
Closing Date
5 Jan 2026, 10:00 pmClosed
Karnataka Neeravari Nigam Limited
Extension of D.G. Room for Erection of 200-KVA Diesel Generator to Amarja Dam Site of Amarja Project for the year 2025-26
KNNL/2025-26/DA/WORK_INDENT3279/CALL-4
KNNL/2025-26/DA/WORK_INDENT3279/CALL-4
Open
Dam and Allied works
Electronic Documents, First(One Cover)
KNNL Division IPC Div No 1 Kalaburagi
₹500
₹17,697
29 Dec 2025
29 Dec 2025
29 Dec 2025
Extension of D.G. Room for Erection of 200-KVA Diesel Generator to Amarja Dam Site of Amarja Project for the year 2025-26
Earth work excavation for Foundation by mechanical means in all kinds of soils upto 3 m depth for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shori...
Providing and laying in position cement concrete mix 1:2:4 using 40 mm nominal size graded crushed coarse aggregates for levelling course for all works in foundation. The granite/ trap/ basalt crushed...
Providing random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) upt...
Providing size stone masonry with hard stone in foundation & plinth with cement mortar 1:6 (1 cement: 6 coarse sand) (CSR 2023-24 Vol-2 I.No. 5.4)
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and laying in position cement concrete mix 1:2:4 using 40 mm nominal size graded crushed coarse aggregates for levelling course for all works in foundation. The granite/ trap/ basalt crushed...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement: 4 coarse sand) inc...
Providing and fixing MS grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel w...
Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providi...
Providing and laying in position cement concrete mix 1:2:4 (M15) using 20 mm nominal size graded crushed coarse aggregates for all sub-structures of building, Irrigation works, Sub structure works of ...
Supplying, fitting and placing TMT FE550/ 550D steel reinforcement for buildings including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapping/ weldin...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: New work (two coats) over and including water thinnable priming coat with cement primer after th...
Providing Raised and cut pointing: Pointing on stone work with cement mortar 1:3 (1 cement: 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per...
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing & fixing 0.63 mm with zinc coating not less than 275 g/ sqm corrugated GS sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diamete...
Supplying of 70 Sqmm, 3.5 Core, (18 GI Strips 4 x 0.8 mm) 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouri...
Laying of 3Cx300 to 3Cx400 sqmm cable in Existing Trench/ GI pipe/ Stone Ware/ RCC Hume pipe using Wooden/ Aluminum Rollers as directed by the departmental staff (ESCOMs SR 2023-24 Vol-6 P-2 I.No. 21....
Providing, laying and jointing 63mm dia HDPE Grade PE80-PN6.0 pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading...
Supplying, fixing, wiring, earth electrode for grounding conduits, IC cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should ...
Supply, Erection, testing and commissioning of AMF panel suitable for 200 KVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland plate, al...
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .