NIT No. 71(2021-22) M-5

Amount

Replacement of MS container by stainless steel water container of 3-4 KL

TANK: THE TANK SHOULD BE ELLIPTICAL SHAPED IN CONSTRUCTION AND SHALL BE FABRICATED OUT OF 3 MM THICK STAINLESS STEEL SHEET (GRADE 304). THE DISH ENDS AT THE FRONT AND THE REAR SHALL BE FABRICATED WITH 3 MM THICK STAINLESS STEEL SHEET (GRADE 304). THE TANK WILL BE PROVIDED WITH ONE BAFFLE PLATES MADE OF STAINLESS STEEL SHEET OF 3 MM THICK INSIDE THE TANK. THE BAFFLES & THE TANK SHALL BE SUITABLY STRENGTHENED BY TIG WELDING. THE TANK SHALL BE LEAK PROOF WITH WELDING PROPERLY GROUND TO GIVE SMOOTH FINISH ALL OVER AND THEN IT WILL BE TESTED TO DETECT ANY LEAKAGE IN THE WELDING SIDE PROTECTOR: BOTH SIDE 150MM PROTACTOR OF 1MM THICK STAINLESS STEEL OF 304. MANHOLE: TWO MANHOLES SHALL BE OF 450 MM DIAMETER HAVING HINGED COVER. THE COVER SHALL BE MADE OF 3 MM THICK STAINLESS STEEL SHEET (GRADE 304) WALKWAY: SUITABLE WALKWAY 15” WIDE SHALL BE PROVIDED ONE SIDE & FIXED ALL ALONG THE LENGTH OF THE CONTAINER WITH ALUMINIUM CHEQUERED PLATE OF 1.2 MM THICKNESS AND LADDER AT THE BACK OF THE TANKER LADDER MADE OUT 40X40X5MM STAINLESS STEEL ANGLE WITH SUPPORT OF 25MM SS PIPE OF 304(G) BASE FOUNDATION:THE BASE FOUNDATION OVER WHICH THE CONTAINER WILL REST SHALL BE FABRICATED OF MS CHANNEL OF SIZE 100X50MM AND IT WILL BE FITTED WITH BASE FOUNDATION WITH NECESSARY MS BRACKETS AND STRUDY “U” BOLTS, AND NUTS AT 3 PLACES. THE BRACKETS AND “U” BOLTS, ETC. SHALL BE GOT APPROVED BEFORE THE WORK IS CARRIED OUT. MUD GUARDS: THE MUD GUARDS SHALL BE FABRICATED OUT OF 16 GAUGE SS SHEET AND WHICH WILL BE FIXED WITH THE ANGLE IRON SUPPORTS OF SIZE 40X40X5MM. PAINTING: THE TANK SHOULD BE BUFFING WITH DULL SHINE FROM OUT SIDE AND INSIDE OF TANK AND CHASIS SHALL BE PAINTED WITH ENEMAL OF APPROVED QUALITY AND MAKE AND STICKER/LOGO OF DELHI JAL BOARD WITH SLOGAN/WRITING WAORK WILL BE DONE AS PER ENGINEER INCHARGES. STICKER : BOTH SIDE STICKER ON SIDE PROTECTOR BLUE TAPE WITH WHITE WRITING WORK AND DELHI JAL BOARD LOGO ON BACK SIDE OF TANKER WITH PHONE NO OF WATER EMERGANCY /TANKER NO.

Tyre and tube of 750 x16 with flap

Draw bar of trailer tanker complete with hook and spring nut bolt etc.

New leaf spring (Kamani) of trailer tanker of 70X10mm of 13 nospatta”s.

“U” Bolt of Kamani 12 mm of 10” long.

Naka and pin of kamani new with fittings suitable for trailer tanker.

Wheel greasing of hub (04 nos.).

P/f rim on trailer tanker size of 7.50x16.

Turntable of 40X40X5 mm m.s.angle completes with Nut/Bolt/Washer and Pin complete.

New Axle of 75x75mm with ball bearing 32213/214 with 750 x16 hub size

P/F of hook and spring of 32 mm m.s.round.

New hub sturd bolt suitable for rim of double plate of 7.50X16.

Kamani Pin/Bolt suitable for Kamani of 70mm.

Retention of Kamani of 04 nos. Of trailer tankers.

Painting of trailer tanker after scrubbing the surface and make it smooth than one coat red oxide than two coat of sky blue color out side the tanker and inside the tanker after scrubbing with sand pepper & make it rust free than two coat of anti corrosive black paint complete

Chassis of Trailer tanker with Draw bar

Letter writing work of slogan with white color 03 side

Add transportation charges

Add cutting and unloading /loading

Unitedmanufacturingcompany