PROVN OF SPLIT AC, GEYSERS AND BATHROOM OF CERTAIN UNIT AT ARMY AREA UNDER GE (ARMY) NO 2 JODHPUR

Amount

Excavation in trenches n.exc 1.5 m wide & n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.

M&L PCC 1:4:8 type D2 (40 mm graded aggregate) in foundation filling and mass concreteetc complete etc.all as specified and as directed.

M&L for brick work with fly ash bricks (Modular size bricks), straight or curved on plan exc 6mtr mean radius, built in cement mortar (1:6) complete all as specified and as directed.

M&L for brick work with fly ash bricks (old size bricks), straight or curved on plan exc 6mtr mean radius, built in cement mortar (1:4) complete all as specified and as directed.

M&L for Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides of soffits (if any) of foundations and plinth beams and similar work etc; rough finish surfaces complete all as specified and as directed.

M&L for Form work to sides of concrete pillars, posts, struts, piers, columns and stanchion etc;as in square/rectangular or polygonal of rough finish surfaces complete all as specified and as directed.

M&L for Form work to sides and soffits of floor or roof RCC beam sides of lintel beam flat rough finish surfaces to receive the plaster, complete all as specified and as directed.

M&L for Form work to soffits of suspended slabs such as roof slabs, landings and similar work; not exceeding 200mm thick (horizontal or sloping), rough finish surfaces complete all as specified and as directed.

M&L for Form work to edges of concrete flats, floor and roofs not exceeding 20cm wide (horizontal or sloping), rough finish surfaces complete all as specified and as directed.

Formwork to chullah hoods, chajjas,troughs and similar items including edges

M&L for providing RCC M-25 (using 20mm graded stone aggregate) as in foundations, including raft footings, foundations beams, plinth beams, bases of columns etc; complete all as specified and as directed.

M&L for providing M-25 (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts etc; complete all as specified and as directed.

M&L for providing M-25 (using 20mm graded stone aggregate) as in beams, lintel up to 1.5m clear span, lintel bands etc; complete all as specified and as directed.

M&L for providing M-25 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in roof, landings, balconies, canopies and in shelves etc; complete all as specified and as directed.

M&L for providing M-25 (using 20mm graded stone aggregate) as in chhaja.

M&L for Reinforcement 10mm dia and over TMT bars cut to length, bent to shape required and binding with MS wire not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for Reinforcement 8 to 10mm dia TMT bars cut to length, bent to shape required and binding with MS wire not less than 0.9mm dia in stirrups complete all as specified and as directed.

M & L for 15 mm thick rendering in CM 1:4 using 100% course sand on roof surfaces with WPC @ 3% by weight of cement provided as floating/setting coat of cement complete all as specified and directed (Note :- WPC shall be measured and paid seperatelly)

Supply only integral water proofing liquid ISI marked Make: Pidiproof LW

Returning,filling in,including spreading,levelling,watering and well ramming in layers not exc 25 cm each layer in hard/dense soil all as specified and directed.

Removing excavated soil n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point all as specified and directed.

M&L for 15 mm thick rendering on stone/ brick masonary wall surfaces in CM 1:4 finished fair and even all as specified and as directed.

M&L for rendering 15 mm thick in CM 1:6 finished even without using extra cement over stone wall surfaces all as specified and as directed.

M&L for 10mm thick rendering in CM 1:3 on ceiling surfaces finished surfaces even and smooth without using extra cement complete all as specified and as directed.

Forming V grooves in plaster n exc 10mm deep and n exc 10mm on face complete all as specified.

M&L for 75mm thick PCC 1:4:8 type D-2, (40mm graded stone aggregate) as in sub floor, sub bases, floor and paving etc; complete all as specified.

M&L for PCC 1:2:4 type B0 25 mm thick using 12.5mm graded stone aggregates as in sub floors/base floors under tiles as in levelling course etc all as specified and directed.

M&L for non skid ceramic coloured tiles of approved shade and pattern, 7 to 8 mm thick ,of sixe 400x400mm laid in floor, set and jointe (square/ rectangular) in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of approved shade and pattern of size 300x600x7 to 8mm thick or any other nearer size as approved by Engineer incharge in vertical surface set and jointed in neat cement slurry and pointed in coloured cement to match laid over 10mm thick screed bed bedding layers in CM 1:4,complete all as specified and as directed.

M&L for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed.

Cement concrete (1:3:6) type C-2 using 20 mm graded stone aggregate as in plinth protection, 50 mm thick, surfaces finished even and fair to receive the stone patti etc including Jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted and set, jointed and grouted in cement mortar 1:3 complete complete all as specified.

M&L for fabrication of aluminium powder coated window any pattern & design (openable with hinges, sliding, tilt and turn, casement , fixed type, villa type, ventilators) fabricated with anodized aluminium rectangular or any type section in frame with approved design & patterns including provn of fixing galvanised mild steel wire cloth on the outer side of frame etc; fixed in position all as specified and directed. Note:- Glass pane & galvanised mild steel wire cloth shall be measured and paid separately.

S&F for figured glass, pin head type ordinary quality, 4mm thick, area of each pane not exceeding 0.5Sqm and glazing with aluminium beading in aluminium frame all as specified and as directed.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer -in- charge. complete all as specified.

S&F of Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specifed.

S&F of 100 mm size Butt hinges, heavy weight, cold rolled mild steel, and fixed, complete all as specified and as directed.

S&F of alluminium anodised handles 150 mm long fixed to windows, complete all as specified and as directed.

S&F Aluminium anodised, barrel tower bolts 150 mm long of extruded section and fixed , complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt 150 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and as directed.

S&F of 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specifide.

S&F of 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specifide.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified.

M&L vitreous china wash down water closet pan (pedestal pattern), white including white plastic seat cover with mild steel CP hinging device, including making connections and fixed in position complete in all respect as specified. incl making connection to inlet flush pipe, & to 'P' or 'S' drain trap, incl supply of long special 'P' or 'S' trap complete all as specified and directed.

S&F PVC 10 ltr. Cap. valveless syphonic action type, flushing cictern, low level, white/ coloured with inlet, ball valve, float and handle including brackets and connection to pipe etc. all as specified.

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 142 gms.) all as specified and as directed.

S&F 15mm Bib taps,fency type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified.

S&F Chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union suitable for 15mm bore pipe etc; complete all as specified.

S & F fancy type chromium plated with long shank and cup stop valves, (concealled type) cast copper alloy,screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F 15mm bore stop valve/ angle stop cock chromium plated, fancy type cast copper alloy, screwed down, high pressure, screwed both ends for iron pipe with long shank and cup complete all as specified.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as aspecified and directed.

S&F 100mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, laid in trenches or in floor etc; complete all as specified.

S&F 100mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, fixed to walls etc; complete all as specified.

S&F 75mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, laid in trenches or in floor etc; complete all as specified.

S&F 75mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, laid in walls etc; complete all as specified.

S&F 100mm bore pipe cast iron 'P' or 'S' trap, complete all as specified.

S&F 100mm bore pipe cast iron cowls, complete all as specified.

S&F 100mm bore pipe cast iron cowls, complete all as specified.

M&L cast iron up to 150mm bore fittings of Bends (any type, radious and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces, single branch, 'Y' junctions, double branch, cross (all sockets or socket and spigot) collars, caps and plugs etc; complete all as specified.

M&L 100mm bore cast iron pipes and fittings joints or connections are filled/ sealed properly by epoxy sealant of ISI mark or M-Seal (Make:- Dr Fixit) apply as per manufacturing instructions, complete all as specified.

M&L 75mm bore cast iron pipes and fittings joints or connections are filled/ sealed properly by epoxy sealant of ISI mark or M-Seal (Make:- Dr Fixit) apply as per manufacturing instructions, complete all as specified.

S&F for 100mm bore pipes stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall etc; complete all as specified.

Preparing new plastered surfaces and M&L for applying chalk whitening/ concrete primer and /or cement base putty as required incl preparing the surfaces smooth by rubbing and / or sandpapering and M&L two coats of Distemper oil Emulsion on new plastered surfaces all as directed by Engr in charge.

Preparation of new plastered surfaces of walls etc. & applying two coats of lime white wash on walls complete all as specified.

Preparation of new plastered surfaces of ceiling etc. & applying three coats of lime white wash on ceiling complete all as specified.

M&L for cement concrete (1:4:8) type D-2 for 150mm dia pipe bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in complete all as directed and specified

M&L for Reinforced concrete pipes, of 150mm bore, class NP3, laid in trenches and jointed in cement mortar as specified complete with collars including all fixing connections complete all as specified.

M&L for PCC (1:3:6) type C2 using 40 mm graded stone aggregate as in surfaces channel and drain of man holes finishing surfaces even and smooth complete all as specified and as directed.

M&L for Jodhpur stone patti slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, laid dry as in manhole coveres / sizes as directed by Engineer incharge complete all as specified and as directed.

S&F vitreous china oval type under counter wash basin, white/ coloured, including PTMT waste fittings, 32mm bore size, waste pipe pvc 32mm bore and angle iron brackets of required size and length etc. and making good disturbed surfaces to match with the existing complete all as specified.

S&F 15mm Pillar taps, cast copper alloy, with capstan heads,chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed complete all as specified and directed.

S&F CP towel rail 450mm long fixed with and including CP brass screws and wooden/ plastic cleats complete all as specified.

S&F soap dish, vitreous China white, approximate size 160x 160x90mm fixed to plugs with chromium plated brass screws complete all as specified.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed to plugs with chromium plated brass screws complete.

S&F glass corner self assembly, fancy type, made of 6 to 7mm thick sheet toughened glass of size 250x250mm, fixed with CP brackets, complete, all as specified and directed. Make: Jaquar range OR equivalent

S&F stainless steel 25 mm dia pipe as in curtain rods including brackets with fancy end knob wall to wall complete all as specified.

M&L for Sub main wiring with PVC insulated but unsheathed 2x4 sqmm single core multi stranded copper conductor cable passing through and including PVC casing caping on wall (by means of screw incl making good existing surface) ISI marked and casing caing accessries fixed on surface of wall, ceiling etc, making good the disturbed surface with and incl 1x4 sqmm single core copper conductor cable PVC insulated and unsheathed as earth wire (green colour) . Note:- Two run of 4 Sq.mm. and one run of 4 Sq.mm (earth wire) cable incuding one run of PVC casing caping will be measured as one length including making good the disturbed surfaces. Make of wire : Finolex/Havells/KEI/Polycab

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed by engineer-in-charge.

Supply & Fixing Sheet metal enclosure SPN 240 Volts having 2 pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed by engineer-in-charge. Make:Legrand/ Indoasian/ Havells.

Supply and fixing electric water heater,storage type ABS plastic and SS tank and heating element upto 2 KW capacity 25 litre, BEE 5 Starrated complete with all accessories such as safety valve, thermostate,NRV, flexi PVC connection pipes of size 15 mm with brass nut suitable for hot & cold water etc. complete all as specified and directed by Engr-in-Charge. Make:- Havells / Bajaj/ Crompton

Supply & Fixing 15 mm dia GI tubing medium grade with all fittings fixed, to walls, ceiling or laid in floors, complete all as specified and directed by Engr-in-Charge. Make : Tata/Jindal/Zenith.

Supply & Fixing Gun-metal, globe or gate valves 15 mm bore ,with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed by Engr-in-Charge. Make : Leader /Zenith / Zoloto

Supply & Fixing Bib taps of 15mm bore CP with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed long body fancy type complete all as specified and directed by Engr-in-Charge. Make :- Leader / Zenith / Zoloto

Supply and install 5 star rated Split Air Conditioner unit working on gas R-32 (Refrigerant) of capacity 1.5 Ton AC consisting of outdoor unit with fan motor, hermetically sealed rotary compressor with accessories and condensing unit of copper tubing complete duly connected with seperately erected indoor unit with blower motor, PM 2.5 filter and complete accessories by means of proper insulated copper tubing up to 5 m suitable 1.5 TR, including MS stand with painting, gas charging, internal copper wiring, remote control complete Make: Voltas,LG,Hitachi,Daikin Note:-Permanent stickers indicating the CA number , Job Number and year of instatllion of AC are to be affixed

sub main wiring and M&L for concealed sub main wiring with 2 run of 4 Sqmm FRLSH, PVC insulated, unsheathed and stranded copper conductor cable with and incl 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn in to separate concealed medium grade, ISI marked, non metallic PVC conduit 20 mm dia size incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed. Note : Two run of 4 Sq.mm. and one run of 4 Sq.mm (earth wire) cable incuding one run of conduit pipe will be measured as one length including making good the disturbed surfaces.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4 KVA MAKE V GUARD/ MICROTEK

S&F Distribution board sheet steel phosphatised powder coated for MCB/DB with copper bus bar and neutral link earthing stud (confirming to IS-13032, IS-8623) SPN 08 way 240 volts double door complete all as specified and dirted by the Engr-in-Charge. MAKE ABB/LEGRAND/HAVELLS

S&F MCB, C Curve type, 10 kA, 63 Amp, SPN with over load and short circuit protection, complete all as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core MAKE HAVELLS/POLYCAB/KEI

Excavation in trenches n exc 1.5 mtr wide, n exc 1.5 mtr in depth and n exc 10 sqm on plain and getting out in soft loose/dense soil for cable, pipe etc. all as specified and as directed by the Engr-in-charge .

Returning, filling in, incl. spreading, leveling, watering and well ramming in layers n exc 25 cm deep in soft/loose soil complete all as specified and as directed by the Engr-in-charge

Removing surplus excavated soil to a distance not exc 50 m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed.

Supplying and laying (length perpendicular to axis of cable) un-reinforced precast concrete cable cover, ISI marked ,class LT, type 1, size 250mm x 150mm x 40mm duly all as specified and as directed.

M & L for fine dry river sand cushioning by laying 8cm thick layer below the cable for making soft bed and 15 cm above the cable and then punning down to its consolidated thickness of 18cm after the cable is laid all as specified in SSR Part I and as directed.

Supply and lay 50 mm bore galvanised steel tubing Light grade with all fittings and fixtures laid in trench or ceiling or laying in floors complete all as directed.

Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2..25 mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below the normal ground level, earth plate surrounded by 15cm thick and packed with layers of charcoal dust and common salt, earth lead GI wire 4mm dia ( 8 SWG) connectd to GI earth plate elcectrode by means of bolts, nuts, check nuts, washers of galvanised iron, thimbles and other end of earth wire connected to main switch board and protected by galvanised iron pipe medium grade 15mm bore and 20mm bore medium grade GI pipe with funnel and wire mesh for watering all as shown in electrc plate No 5 connected to earth test point. 40mm thick pre cast RCC M-15 ( Nominal mix) cover reinforced with XPM weight not less than 4 Kg/Sqm with suitable handle of 6mm dia MS bar and angle iron 40X40X3mm frame for cover, PCC chamber in cement concrete M-15 ( Nominal mix) , excavation and earth work in any type of soil and connected all as specified and as directed by Engineer-in-charge.

M&L for Point wiring with 1.5 Sqmm (nominal area) copper conductor FRLSH cable (multi-stranded) PVC insulated and unsheathed electric cable 1100 volts drawn through PVC concealed conduit of suitable size (as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 1.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including METAL FLUSH BOX made out of MS with of suitable size and shape complete all as specified and directed by Engr-in-Charge for ne light/exhaust point controlled by one 5 Amps one way switch

All as per item No 99 above but for one 3 pin socket outlet 5 Amps on same board

All as per item No 99 above but for one 3 pin socket outlet 15 Amps independent with cable of size 4 Sqmm for point wiring and 2.5 sqmm in continuous earth wire complete all as specified and directed by Engr-in-Charge.

S & F switch PT 1 way 5A, 240 Volts complete all as specfied and directed by Engr-in-Charge.

S & F switch PT 1 way 15A, 240 Volts complete all as specfied and directed by Engr-in-Charge.

S & F socket, 6A - 2/3 pin complete all as specfied and directed by Engr-in-Charge.

S & F Socket 6A/16A - 2/3 pin complete all as specfied and directed by Engr-in-Charge.

Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 67 protection complete.

Ceiling rose surface backelite ISI marked with 3 terminal including connecting and testing complete all as specified and dirted by the Engr-in-Charge.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 200 mm

Supply, laying, testing and commissioning of LT UG cable, XLPE insulated, PVC sheathed, galvanized steel strip armoured electric power cable with stranded aluminium conductor, 1100 volts grade of size 25 sqmm 2 core, suitable for earthed system, laid in duct/trench/along pole/wall etc including nuts, bolts, washers, saddles & screws etc and making connection, complete all as directed. Note : 1. The cost of Al thimbles/lugs and cable gland etc is included in quoted rate and no extra payment will be made for it. 2. Excavation, earth work, sand cushioning and brick protection will be measured and paid separately under respective items.

Supply and lay pipe galvanized, “Medium class”, including fittings 50 mm (1”) dia.

Supply and fix Valve, stop, screwed,50 mm (2”) dia pipe

Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm (1”) dia.

Supply and fix Valve, stop, screwed,25 mm (1”) dia pipe

Cutting the existing water supply DI/GI pipe line 80 mm dia and taking branch connection of 50 mm dia pipe by inserting Tee complete.

Chamunda construction company (BID ID -3497958)

D DEV COMPANY (BID ID -3504910)