Loading…
Loading…
Tender Value
₹23.7 Cr
EMD Value
₹35.5 L
Closing Date
8 May 2026, 3:00 pmClosed
Track Maintenance including miscellaneous P.way and other ancillary works in the jurisdiction of CGM/Mumbai unit In Maharashtra State i.e from JNPT Ch JNPT Ch - 0.442 to New Umbergaon Ch 177.0 (Total 177 KM) in connection with western Dedicated Freight Corridor. (for 2 year).
MUMENTrackMaintenance
MUMENTrackMaintenance
Open
24 Months
Mumbai, Maharashtra
₹11,800
₹35.5 L
15 Apr 2026
15 Apr 2026
24 Apr 2026
24 Apr 2026
Supplying,Fabricating and fixing access ladders,inspection platforms,Trolley 1 refugesetc.,on bridges with structural steel conforming to IS:2062 including welding/bolting,priming painting with one coat of ready mixed paint of Zinc Chromate(IS:104)with DFT of 25-30 microns followed by one coat of Zinc Chrome Red Oxide(IS:2074)with DFT of 25 microns with all material ,labour,T&P as a complete job.Note: Painting shall be paid separately under relevant item.
Boxing and profiling of ballast as per procedure prescribed in latest edition of IRPWM 2 including cess dressing on both side of track .the work will include removing excess ballast from track and putting the same crib and shoulder by leading to a maximum of 50m including crossing of track ,deweeding on ballast section etc, and as directed by engineer in -charge .
Dismantling and removing of rail of all section and length from from track, laid on 3 any type and density of sleeper by removing fish plates ,fastenings and fishbolts and other material including including stacking all released materials with in an average distance of 500m as directed by engineer in charge . NOTE: cutting of rail shall be paid saprately . 2. work to be done under traffic block /for casual /scattered rail renewel work Running
Cutting and croping of rail of 60kg-90uts, manually and perfectly vertical with contractors labours ,hakshaw blade ,and tools and plants . In -situ situation.
Drilling of hole different diameter and chamfering in rail of any section and any UTS .......etc Hole of dia above 26.5 mm .
Lubrication of plate/Rail screws of point and crossing ,SEJs Bridges,curves etc. with 9 greases graphite ,including removal of screws carefully without damaging sleepers , cleaning with wire brush etc , both screws and dowel hole, applying greases graphite ,reflexing the screws and sealing the top and side of screws with greases graphite to prevent ingress of moisture and corrision with contractors, labours ,tools,consumables under traffic condtion all lead and lift complete /By using Railways/ DFCCILS grease graphite.
providing caution watchman at a location where caution order is imposed and ensuring to be on continous vigil and exhibit necessary hand signals to the train for their .....................screened for suitability as per railway norms.
DE-stressing of LWR/CWR track of any density under traffic line block with contractors labours ,tools ,equipments and consumables inclusive of all lead and lift. Activities including cutting of LWR/CWR into convenient panels of specified length , removal of ERCs linears ,greasing of ERCs sand linear contact area ,lifting rails and keeping the monorollers provided at 12 every 15 sleepers working out elongation of rails ends depending on prevailing site conditions ,pulling rail with the help of hydraulic tensors to achieve the desire enlogation ,cuuting rail as required removing rollers and placing rail in position ,re-fixing ERCs adjusment of gap at SEJs . NOTE: 1. welding of rail joint shall be paid saprately 2.rail cutting and hauling shall be paid saprately 3. opening and closing of LCs if required will be paid saprately 4.as per procedure prescribed latest edition IRPWM/CEs circular destressing of LWR/CWR ,if any with contractors hydraulic rail tensor.
Lubrication of ERCs and its liner contact area by removal of ERCs and Metal/GFN liners in rail paneal cleaning of rust /scale of ERC Metal/GFN liners &SGCI insert by using wire brush 14 scrapper/sand emery paper etc supply and application of graphite grease,as prescribed by Railway/DFCCIL for under side of liners & corresponding area of rail foot & SGCI insert withERC sand re fixing the same as per procedure prescribed in latest edition of IRPWM/DFC manual with contractors grease and all other tools & plants complete and as directed. Running
Lubrication of Guage Face of Rail on curves, crossovers,Points & Crossings,Turn in Curves and at locations........as Directed
cleaning of side drains along the track including disposing of muck beyond railway boundary as per instructions of engineer in-charge to keep drains clean and clear in cuttings etc. Running
Removing weeds and bushes in ballast section and cess up to 3.95m from center line of track in mid section and stationyard, ,as per specified by engineer in chage including disposal of branches ,bushes outside cess yard .
Trimming of tree branches coming with in 6m of center line of track and those 18 obstructing views of curves/lc/signal/indicator at locations insection and station yard ,as specified by engineer in charge including disposal of branches ,bushes outside cess/yard. NOTE; girth of more than 20cm will only be considered as a tree branches.
Making kutcha trapezoidal side drain of bottom width as 300 mm and depth of 450mm in cutting section by excavation in all types of soil including utilising excavated muck for dressing of cess,slopes etc.inRailway/DFCCIL land.
Providing Assistant to Patrol man for patrolling during cold/ hot weather on track for protecting track as per IRPWM. Note:1.The person deployed for patrolling must have the following items:• Valid certificate of competency issued by Railways.•FitforA-3medicalcategory-certificate 20 issued by registered medical practitioner 2.Necessary equipments prescribed shall be supplied by Railways/DFCCIL for each patrol man and same to be handed ove rback to Railways/DFCCIL in good condition. 3.Thefollowing equipment to be arranged by contractor for each patrol man :H.S. Flags Green-1No(Standardsize), H.S Flags Red-2Nos.(Standardsize),Torch light 3cell-1no., Staffforflags- 1no.,Whistle Thunder-1no, Protective clothing to withstand climate,Gumboots,Haver sack.
Painting 2 coats to bridge refrence/boards, structures etc. along track with enamel paint of approved make with different colours and letters as directed by engineer in-charge.
156010 -Unimat machine related works /carrying out pre -tamping ,during tamping 25 and post tamping works for tamping of turnouts of all types under traffic block condition which include 1 . Re adjustment of Ballast ,heaping of ballast ,filling up of activities in tamping zone by picking ballast from stacks / shoulder /crib of adjoining ............................etc.
Hiring of machinery for minor miscellaneous works for short duration including 36 operator/driver, fuel, lubricants and consumable. The contractor shall arrange all statutory permits as required by rules and regulations prevailing in the area of work. Payment shall be made for actual working hours at site.
supplying and filling 50kg size empty cement polythene bag with rly.ballast /moorum/earth/sand/quaary dust etc .placing the filled bags on high bank ...........complete as directed by engineer in charge at site including crossing of track where necessary.
proving and laying filter material as per RDSO specification underneath pitching in slopes complete as per drawing and technical specification
Thermo-mechanically treated of bars of grade Fe-500D or more of approved brand makes
Providing and laying in position machine batched, machine mixed and machine vibrated Cement Concrete of specified grade as per approved Design Mix (mixed in Mobile Concrete Batching/Mixing Plant at site using 20mm graded crushed stone aggregate and coarse sand of approved quality in jacketing of piers and abutments from bottom of foundation up to a height of 41 10m for designed thickness of jacketing including finishing, using Plasticiser in approved proportions (as per IS:9103), to modify workability without impairing strength and durability complete as per specifications and direction of the Engineer in charge. Note: 1. Payment for cement, reinforcement and shuttering shall be paid extra under relevant item. 2. Plasticizer shall invariably be used in approved proportion to increase workability with minimum possible quantity of cement for all grade of Design Mix Concrete unless it is specifically approved citing reasons for notusing plasticisers at the stage of Mix Design and in that case deduction shall be made as per relevant item.
Cess repair/widening work as per RDSO Specifications and guidelines RDSO/2020/GE: IRS-0004 or latest in running line with suitable soil to the designed profile The work shall include uprooting and disposing of all the vegetation, benching at every 30 Cm vertical height, earthwork in benching portion and compaction using suitable slope vibratory Rollers/Compactors etc. to achieve 42 prescribed MDD. Note: 1. Payment of cess repairs shall be based on the quantities worked out from the cross sectional calculations only and worked out from the initial ground levels before doing benching and final levels as done for new embankment. The earth work in benching portion shall not be paid extra as the same has been included in the rate. 2. The earth work shall be started only after Completing of the benching and certified. 3. The benching Work shall be done for a maximum height of 1.50 m at any time based on the progress of earthwork starting from toe of the embankment.
Systemic overhauling of track under traffic as per procedure prescribed in latest edition of IRPWM , including removing the crib ballast in 50mm to 75mm depth below bottom of sleeper and complete shoulder ballast without breaking core under the bottom of sleeper, to recover 43 clean ballast by screening on wire mesh and disposing off the muck including throwing & leveling, if required beyond minimum 5m from the edge of cutting which are up to 3m deep or alternatively carting it up to 50m for disposing it off beyond cutting or platforms away from the track, as directed by Engineer in-charge including cutting & making up the cess and ensuring proper drainage slope and then re-inserting cleaned ballast into track and compaction of shoulder and crib ballast by wooden mallet and dressing / profiling ballast as per railway specifications.
Maintenance of Track on Main line & Loops,Point & crossings etc. including Special attention to Section for Carrying Out Various Maintenance work Listed .....one Gang Comprising of 20 Physically Fit Labour Plus 1 Mate .
Manufacturing, supplying and laying factory made CC block pavers for road surface 45 of level crossings to RDSO Drg. No. M.00003, manufactured using 20mm size graded hard stone aggregates of approved quality over a well compacted sand bedding 50 thick with all contractor's cement, labour, tools/plant and curing with all lead & lift as per specifications and as directed by Engineer in-charge.:_ 80mm thick Block of M-35 Grade for Medium Traffic
137010 - Anti-corrosive painting of rail outside track on rail bottom, web, foot and 47 fishing plane with two coats of thickness of 100 microns each by bituminous black paint confirms to IS- 9862 of reputed make including surface preparation, as a complete job as per procedure prescribed in latest edition of IRPWM.
Anti-corrosive painting of rail on running track of any sleeper density on web, foot etc. including liner contact area (excluding bottom of foot) and fishing plane as per requirement with two 50 coats of thickness of 100 microns each by bituminous black paint confirms t o IS-9862 o f reputed make including painting of liners, ERCs and including surface preparation, as a complete job as per procedure prescribed in latest edition of IRPWM Note: 60% of payment shall be made if painting on only gauge face side is done.
Quick cutting with abrasive rail cutter of alltypes of rail sections including 52 wearresistant, head hardened rails up to 110UTS, with contractors tools & plants, equipment, consumable with all lead & liftetc. complete as directed by Engineer in-charge. Abrasive Rail Cutter will be as perRDSO Specification No. TM/SM/1 (Rev. 01of 2012) with latest status of RDSO; RailCutting Wheel Abrasive Disc will be as perRDSO Specification No.TM/SM/2 (Rev. 01 of2020)
Sleeper Spacing, Re-spacing / Squaring of sleeper by Hydraulic Sleeper Spacer with 53 contractor's tools & plants, equipment, consumable with all lead & lift etc. complete, as directed by Engineer in- charge. Hydraulic Sleeper Spacer shall be as per RDSO's Specification No. TM/SM/17, dated 31.03.1992.
Extraction of jammed ERC by Heavy Duty Hydraulic Extractor with contractor's tools 54 & plants, equipment, consumable with all lead & lift etc. complete, as directed by Engineer in- charge. Heavy Duty Hydraulic Extractor for jammed ERCs (10 Ton capacity) shall be used as per RDSO's Specification No. TM/SM/6, dated 8.05.1991.
Clearing waterway of major & minor bridges by removing weeds / shrubs / bushes, 55 removing silt deposit, filling scours, if any up to 10 metre from centre of bridge on either side including disposing waste and silt away from waterway. Note: Rate is for a single line and per metre of bridge span.
Providing lighting arrangements with halogen lamps on and around machine during machine working in night time blocks, with contractor's generator, consumables, all necessary electrical fittings, operators etc. Note: 1. Lighting arrangement is to be provided as per advance 61 planning of Night Blocks and written communication. 2. In case lighting arrangement is made available but not used due to non-availability of block, payment @ 60% of the item rate shall be made. 3. In place of Halogen, LED lamps of equal lumen capacity may be used with the approval of Engineer -in-Charge. 4. If lighting arrangement fails during block, recovery shall be made twice the rate per day.
Measuring of Toe Load of ERC during service in field by Electronic Toe Load 62 Measuring Device with contractor's tools & plants, equipment, consumable with all lead & lift etc. complete, as directed by Engineer in-charge. Electronic Toe Load Measuring Device will be as per RDSO's Specification No.TM/SM/ETLMD/218 dated 13.9.2012. Above/
Supplying ans stacking at site moorum (note:stack measurement shall be done as per DSR specification). Quarry dust
Centering and shuttering including stutting propping etc and removal of form work
Providing and laying in position specified grade in reinforced cement concrete excluding the cost of centering , shuttering ,finishing and reinforcement .All work up to plinth level .......etc.
" Reinforced cement concrete work in wall (any thickness) including attached pilaster 5 ,buttress ,plinth and string courses fillets, columns ,pillars piers, abutments posts and struts etc, above plinth level upto five floor level excluding cost of centering shuttering finishing & reinforcement "/"1:1.5:2........etc.
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means 6 over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in- charge. Above/
Cutting vetiver ,weed /bushes from track embankment by contractor disc cutter NS machine and dispossed of the waste material near or outside DFCCIL Row as per instruction of engineer in charge with all lift ,lead icluding crossing of track, if required including patrol ,maintenance of machine and disc .
'Tamping of track picking up slaks in cpncrete sleeper track by hand held of track NS tamper (engine mounted version) to be used in pair of make atlas copco/chakardhar industries /lakshmi engineering works or equivalent with contractor manpower .........as per RDSO specification no. TM/SM/OTT/321,dated 28.01.2009"
Arranging labour performing duties of keyman/mts as and when required by engineer ,for various under DPM /APM ,with contractors t$p ,equipments hand signal flags etc. as per specification ,special conditions and detailed scope of work as furnished in the tender and as NS directed by engineer in-charge. NOTE: 1. the person deployed for patrolling must have the following item : valid certificate for competency issued by DFCCILs .medical certificate issued by DFCCIL fit for A3 medical category 2. the following equipment will be supplied by DFCCILs for each patrolman and same to be handed over back to DFCCIL in good condition. .detonators -10nos if used,brusted detonator to be handed over back and report with reason for use. for maximum duration of 08 hours .
Maintenance of track on main line and loop ,point crossing etc. including special attention to section for carrying out various maintenance works listed in DFCCILs p.way manual /bridge manual / LWR manual for safe running of goods and passenger train with contractors tools/labours etc. complete as directed by engineer in chrge including but not limited to keeping of stores ,materials ,taking out and stacking materials of stores repair to ssd ,assistance in shedule NS inspection of Exe/ser exe /apm ,casual shifting /putting in of ballast in yard or mid section ,material stacking and removal in mid section/ yard NOTE: 1. contractor shall arrange one team comprising of minimum 7 labours one p.way supervisor with sufficient experience in p.way working for full month, further weekly rest shall be given to the workers and alternarte arrangement of worker shall be done on such weekly rest. 2. in case,contractor provides less no. of labour/supervisors payment will be deducted @ 0.5% of the accepted rate per person. 3.payment shall be given for the above team (7labour+1supervisor ) per station wise.
Unloading of ballast from railway/DFCCIL hopper wagon under block condition NS including taking out jammed ballast from hopper gate as per need and manually emptying out of ballast if due to some condition it remains in hopper only emptying out of ballast shall be done in yard or as per instruction of engineer in charge
Supplying empty HDPE bag of 750mm x 350 mm at specified location as desired by NS engineer incharge /his representative including cost of all lead lift labour material T&P C&P taxes GST etc the rate also including cost for crossing of track nalla , ascent descents or any other obstructions to be met with as a complete job Above/
Any item of USSOR 2021 required to be operated in field in extreme conditions
Item Breakup - A-SCHEDULE A(SOR ITEM)
Each Total 683488.00 Cutting and croping of rail of 60kg-90uts, manually and perfectly vertical with contractors labours Item- 6 ,hakshaw blade ,and tools and plants . In -situ situation. S No. Item Description of Item Unit Qty Rate Amount No
Each Total 96993.60 providing caution watchman at a location where caution order is imposed and ensuring to be on Item- 11 continous vigil and exhibit necessary hand signals to the train for their .....................screened for suitability as per railway norms. S No. Item Description of Item Unit Qty Rate Amount No
Each Total 265339.50 Painting 2 coats to various P.Way Reference Post, Structures etc. with enamel paint of approved Item- 22 make with 2 coats of different colours & letters, as directed by Engineer in-charge. S No. Item Description of Item Unit Qty Rate Amount No
850.00 station. Total 1434788.70 Painting 2 coats to bridge refrence/boards, structures etc. along track with enamel paint of Item- 23 approved make with different colours and letters as directed by engineer in-charge. S No. Item Description of Item Unit Qty Rate Amount No
general board,structures etc. Total 4692500.48 156010 -Unimat machine related works /carrying out pre -tamping ,during tamping and post tamping works for tamping of turnouts of all types under traffic block condition which include 1 . Re Item- 25 adjustment of Ballast ,heaping of ballast ,filling up of activities in tamping zone by picking ballast from stacks / shoulder /crib of adjoining ............................etc. WDFC FIELD UNIT-VALSAD-CIVIL/WDFC S No. Item Description of Item Unit Qty Rate Amount No
15.00 Total 2123454.90 Rails/Loading of rails of any section and length upto 13 meters in wagon/Truck/trailer including lead Item- 27 upto 50 meters and lift upto 5 meters. S No. Item Description of Item Unit Qty Rate Amount No
40.00 handling by machenical means is not possible
40.00 not operned to traffic but handing by mechanical means is not possible Total 19104.00 Loading of 52 kg/60kg PSC normal line and special sleeper upto 2.75 meter length in Depot /Station Item- 28 /Mid section between station in a neat manner to department material train (DMT) for contractor's /Railway,s Truck /Trailer with crane or any other S No. Item Description of Item Unit Qty Rate Amount No
100.00 handling by mechanical means is not possible
100.00 not opened to traffic but handling by mechanical means is not possible
40.00 and traffic block is required.
20.00 and traffic block is not required or in Truck / trailer Total 46450.60 Loading, leading and unloading of all types of P.Way fittings and all other miscellaneous material except Rails, sleepers, switches, crossings, SEJs and Glued Joints by road vehicles for different Item- 29 leads. Note: Lead shall be the shortest motorable road length between the points of loading and unloading. S No. Item Description of Item Unit Qty Rate Amount No
100.00 item no. 172047 Total 339377.40 transportation of rail sleeper switches crossing SEJ and glue joints by road vehical for different lead Item- 30 ---etc S No. Item Description of Item Unit Qty Rate Amount No
MT WDFC FIELD UNIT-VALSAD-CIVIL/WDFC
100.00 item no. 172047 Total 131503.70 Unloading of 52kg / 60kg PSC line and special sleepers up to 2.75 metre length in Depot / Station / Mid-section between stations in neat manner for Railway usage from departmental material train Item- 31 (DMT) or contractor's / Railway's Truck/Trailer with crane or any other means including crossing of one track and lead up to 250 metre & lift up to 5 metre with contractor's labour, tools & plants, machinery, consumables etc. Note: In case of any damage to sleeper during loading, penalty S No. Item Description of Item Unit Qty Rate Amount No
40.00 lines, not opened to traffic
MT Total 23073.60 Unloading of 52kg / 60kg PSC special sleepers beyond 2.75 metre length in Depot / Station / Mid- section between stations in neat manner for Railway usage from departmental material train (DMT) or contractor's / Railway's Truck/Trailer with crane or any other means including crossing of one Item- 32 track and lead up to 50 metre & lift up to 5 metre with contractor's labour, tools & plants, machinery, consumables etc. Note: In case of any damage to sleeper during loading, penalty @ 50% of the all inclusive cost of sleeper shall be levied. S No. Item Description of Item Unit Qty Rate Amount No
50.00 not opened to traffic
MT Total 23418.50 Spreading of New / SH , normal or wider base PSC sleepers from stack along track on either side for Item- 33 different leads with all lifts by any means S No. Item Description of Item Unit Qty Rate Amount No
6000.00 every 500m or part thereof beyond 500 m Total 741900.00 Collection, segregation and stacking of various scattered P.Way materials at nominated stacking Item- 34 location with serviceable and un-serviceable ones separately within a lead up to 500 metre and lift up to 5 metre including crossing of track(s) wherever necessary as directed by Engineer-in-Charge. S No. Item Description of Item Unit Qty Rate Amount No
70.00 Check Rails etc.
70.00 items Total 88622.10 Manufacturing, fabricating and supplying retro-reflective Engineering Indicator boards, made of 2mm thick aluminium sheet or 3mm thick aluminium composite sheet, face to be fully covered with high intensity encapsulated type heat activated retro-reflective sheeting conforming to type-IV of ASTM-D4956-01 in yellow & black or other colour combination including subject matter, message, symbols, borders etc. as approved by Engineer In-charge or as per IRPWM guidelines, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure Item- 35 conforming to class-2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back-support frame of M.S. angle iron of size 25mm x25mm x 3mmprovided all along the edges of board with theft resistant measures back side of board shall be with non- peelable weatherproof paint, consisting of one coat of zinc chromate primer and two coats of epoxy paint. Vertical post shall have black & white anti-corrosive paint or powder coating complete, as directed. S No. Item Description of Item Unit Qty Rate Amount No WDFC FIELD UNIT-VALSAD-CIVIL/WDFC
50.00 with back support frame fixed to vertical post of ms angle of size 50mm*50mm*06mm of 3650mm long.
50.00 shape having each side of 1000mm with back support frame fixed to vertical post of ms angle size 50mm*50mm*06mm of 3650mm long.
50.00 with back support frame fixed to vertical post of MS angle of size 50mmx50mmx6mm of 3650 mm long
50.00 having diameter of 1000mm with back support frame welded to vertical post of ms angel.
500.00 Indicator / Point Indicator / SEJ Boards to be provided at various locations on formation, made out of MS sheet 2mm thick of size 450mm x 300mm duly fixed with MS frame of 25mm x 25mm x 3mm angle welded to 50mm x 50mm x 3mm MS angle, 1000mm long post split and bent 100mm at bottom end with all lead & lift as per specification and including painting of details with enamel paint, as directed by Engineer in- charge (Earthwork & concreting will be paid separately) Total 2020530.00 Hiring of machinery for minor miscellaneous works for short duration including operator/driver, fuel, lubricants and consumable. The contractor shall arrange all statutory permits as required by rules Item- 36 and regulations prevailing in the area of work. Payment shall be made for actual working hours at site. S No. Item Description of Item Unit Qty Rate Amount No
700.00 minimum 1.10 cum bucket capacity .
500.00 crane of 12 T capacity of misc . Works of handling materials .
2000.00 other misc. work. Total 1714383.00 proving and laying filter material as per RDSO specification underneath pitching in slopes complete Item- 39 as per drawing and technical specification S No. Item Description of Item Unit Qty Rate Amount No
70.00 specification underneath pitching in slopes complete as per drawing and technical specification ..........at worksite.
114.00 brands/makes Total 1198719.10 137010 - Anti-corrosive painting of rail outside track on rail bottom, web, foot and fishing plane with two coats of thickness of 100 microns each by bituminous black paint confirms to IS- 9862 of Item- 47 reputed make including surface preparation, as a complete job as per procedure prescribed in latest edition of IRPWM. S No. Item Description of Item Unit Qty Rate Amount No
RM Total 2370600.00 WDFC FIELD UNIT-VALSAD-CIVIL/WDFC Renewal of Switch Rails (Tongue rails, Stock rails and fittings) of all rail sections, under line block conditions ensuring proper housing & changing of stretcher bars and fittings as required. Work also includes drilling of hole, if any, and leading of rails laying anywhere in station yard to site of work. Released switch rails shall be stacked at indicated place in a countable manner within the lead of Item- 49 250m & all lift, clear of infringements, crossing of track, if any complete, as directed. with contractor's vehicles, consumables, stores, labour etc. complete, as directed by engineer in- charge. Note: 1).One set means Two Tongue rails and Two Stock rails (2) One tongue & stock rail shall be considered as 1/2 set. (3) One tongue rail or one Stock rail shall be considered as 1/4 Set. S No. Item Description of Item Unit Qty Rate Amount No
Set Total 224457.95 Anti-corrosive painting of rail on running track of any sleeper density on web, foot etc. including liner contact area (excluding bottom of foot) and fishing plane as per requirement with two coats of thickness of 100 microns each by bituminous black paint confirms to IS-9862 of reputed make Item- 50 including painting of liners, ERCs and including surface preparation, as a complete job as per procedure prescribed in latest edition of IRPWM Note: 60% of payment shall be made if painting on only gauge face side is done. S No. Item Description of Item Unit Qty Rate Amount No
TRM Total 6305000.00 Quick cutting with abrasive rail cutter of alltypes of rail sections including wearresistant, head hardened rails up to 110UTS, with contractors tools & plants, equipment, consumable with all lead Item- 52 & liftetc. complete as directed by Engineer in-charge. Abrasive Rail Cutter will be as perRDSO Specification No. TM/SM/1 (Rev. 01of 2012) with latest status of RDSO; RailCutting Wheel Abrasive Disc will be as perRDSO Specification No.TM/SM/2 (Rev. 01 of2020) S No. Item Description of Item Unit Qty Rate Amount No
Each Total 44025.40 In-situ re-conditioning of worn out 1:8½ built-up / fabricated crossing on all types of rail sections under traffic by RDSO approved agency, as prescribed in 'IR's Reconditioning of Points & Crossings Item- 58 Manual' with RDSO approved electrodes and suppliers, finishing & grinding within permissible tolerance limit, as directed by engineer in-charge. Note : One obtuse crossing shall be considered equivalent to two nos. of 1:8½ crossing for payment. S No. Item Description of Item Unit Qty Rate Amount No
Each Total 40299.75 In-situ reconditioning of worn out 1:12 or flatter built-up / fabricated crossing on all types of rail sections under traffic condition by RDSO approved agency, as prescribed in 'IR's Reconditioning of Item- 59 Points & Crossings Manual' with RDSO approved electrodes and suppliers, finishing & grinding within permissible tolerance limit, as directed by engineer in-charge : S No. Item Description of Item Unit Qty Rate Amount No
Each Total 46607.00 Systematic Overhauling Works - Systemic overhauling of track under traffic as per procedure prescribed in latest edition of IRPWM , including removing the crib ballast in 50mm to 75mm depth below bottom of sleeper and complete shoulder ballast without breaking core under the bottom of sleeper, to recover clean ballast by screening on wire mesh and disposing off the muck including Item- 60 throwing & leveling, if required beyond minimum 5m from the edge of cutting which are up to 3m deep or alternatively carting it up to 50m for disposing it off beyond cutting or platforms away from the track, as directed by Engineer in-charge including cutting & making up the cess and ensuring proper drainage slope and then re-inserting cleaned ballast into track and compaction of shoulder and crib ballast by wooden mallet and dressing / profiling ballast as per railway specifications. S No. Item Description of Item Unit Qty Rate Amount No
12000.00 1540 sleepers/Km or more WDFC FIELD UNIT-VALSAD-CIVIL/WDFC
12000.00 in yards Total 3063960.00 Providing lighting arrangements with halogen lamps on and around machine during machine working in night time blocks, with contractor's generator, consumables, all necessary electrical fittings, operators etc. Note: 1. Lighting arrangement is to be provided as per advance planning of Item- 61 Night Blocks and written communication. 2. In case lighting arrangement is made available but not used due to non-availability of block, payment @ 60% of the item rate shall be made. 3. In place of Halogen, LED lamps of equal lumen capacity may be used with the approval of Engineer -in-Charge. 4. If lighting arrangement fails during block, recovery shall be made twice the rate per day. S No. Item Description of Item Unit Qty Rate Amount No
15.00 generator and 8x500 W) Total 154556.55
Item Breakup - B-SCHEDULE B(SOR ITEM)
Sqm Centring and Shuttering..........Retaining wall..... (4.3.2) Total 447004.00
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
NITF.pdf
ATTACHMENT
Finaltenderdoc.pdf
ATTACHMENT
Download all tender documents and submit your bid