PM to L031 PS road to Beldihi road

Trimming of grass and weeds from the shoulder / berms and disposal the same to the suitable location as per technical specification Clause 1914 of MORD as per direction of the Engineer in charge

Providing, laying, spreading and compacting graded stone aggregates to wet mixed macadam specification including Premixing the materials with water at OMC in mechanical mix plant,carriage of mixed materials by tripper to site ,laying in uniform layer with paver in sub-base/base course on well prepared surface and conpacting with vibratory roller to achieve the desire dencity as per clause of MoSRT&H Specification for road and bridge works.

Providing and applying Primer Coat with bitumen emulsion SS-1 at the rate of 0.60kg/sqm on the prepared treated with primer and cleaned as per technical specification for Road and Bridge works.

Providing & applying Tack Coat with bitumen emulsion using emulsion pressure distributor @ 0.25 to 0.30 Kg/ Sqm on prepared bituminous surface using mechanical means as per Clause- 503 of MoSRT&H Specification for Road & Bridge works(4th Revision).

Labour for surface dressing with 12 kg penetration grade of bitumen and 0.15 cum of 19mm nominal size chips per 10 sqm and rolling with PRR incl.cost and conveyance of chips and bitumen etc.all complete.

Providing and laying Semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen, transported to site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolling with smooth wheeled,vibratory roller and tandem rollers to achieve the desired compaction as per Clause-508 of MoSRT&H Specification for Road & Bridge works(4th Revision)

Construction of embankment with approved materials obtained from borrow pits with a lift upto 1.5m transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 of MoRD

Providing & fixing RCC ordinary KM stone & 5th KM stone for finished item of work as per approved drawings and technical specification and Clause 804 & 806 of MORT&H Specifications for Road & Bridge works(4th Revision)(A) Ordinary Kilometre Stone

(B) 200m road Stone

Providing and errecting direction and identification retro-reflective sign as per IRC-67-2012 made out of class-B and high intensity prismatic grade sheeting as per ASTMD4956-09 type lll amd iv strictly conforming to clause 801.3, fixed over 2 mm thick aluminium sheeting clause 6.5.2 of IRC 67-2012 with angle iron frame 75mmX75mmX6mm fixed with 2 nos and 3 nos horizontal and 1 no vertical extra supporting member of MS angle 1200 x 900mm Informatory sign board 1200 x 900mm Informatory sign board

Village identification board (600X450) mm

900 mm Equilateral Triangle

Painting two coats with including primer with syntheic enamel paint etc complete.

Supplying & fixing 15cm dia and 1m long RCC guard post in cement concrete(128-10-2025228-10-20254) including cost, conveyance,taxes, royality of all materials including centering and shuttering finished the exposed surface smooth, watering cost and labour for reinforcement Guard Post

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.