MODIFICATION AND REPAIRING WORK FOR CIVIL WORK OF PAL-PALANPUR SEWAGE PUMPING STATION & CIVIL MAINTENANCE WORK OF VARIOUS SPS SITUATED IN WEST (RANDER) DRAINAGE ZONE, SURAT.

NAME OF WORK:- MODIFICATION AND REPAIRING WORK FOR CIVIL WORK OF PAL-

PALANPUR SEWAGE PUMPING STATION & CIVIL MAINTENANCE WORK OF VARIOUS SPS

SITUATED IN WEST (RANDER) DRAINAGE ZONE, SURAT.

Item Description Qty. Rate Unit Amount

Excavation for foundation including sorting out & stacking of useful

materials & disposing of the excavated stuff upto 50 mt. Lead & all

1 1 lift, watering etc. Comp.

Loose or Soft soil Executed With Mechanised Efforts /

(A) Up to 1.5 Mt. depth 50.00 123.13 C.M.

Excavation for foundation includ.sorting out & stacking of useful

materials & disposing of the excavated stuff upto 50 mt. Lead & all

lift, watering etc. Comp.

Loose or Soft soil Executed With Manual Labours

(A) Up to 1.5 Mt. depth 50.00 212.52 C.M.

Dismentalling tiled or stone floors laid in mortar including stacking

3 3 of serviceable material and disposal of unserviceable material with all 300.00 50.11 S.M.

Removing the scraping of old deteriosted plaster of any thickness

4 4 from wall/R.C.C. member including stacking of serviceable material 100.00 20.55 S.M.

and disposal of unserviceable from site of work with all lead and lift.

Demolition including stacking of serviceable materials and disposal

of unserviceable materials with all lead and lift

(i) RCC work 25.00 1110.75 C.M.

Demolition of brick work and stone masonary including stacking of

6 6 serviceable materials and disposal of unserviceable materials with all

(ii) in Cement Mortar 40.00 577.92 C.M.

Dismentaling door, windows, ventilators etc. (wood or steel) shutters

including chowkhats architraces, holdfasts and other attachment etc.

complete and stacking them within all lead and lift.

(i) Not Exceeding 3 Sq.M. in area

Dismentling steel work including distempering and stacking the

maerials with all lead and lift.

Dismantling sanitary fittings like wash basin, W.C. pan Indian and

9 9 European type, flushing tank etc. including stacking the materials 5.00 425.93 Each

with all lead and lift.

Removing Sanitory fitting like bib tap, flush cock, pillar tap, angle

Dismentaling of sheet roofing including ridges, Hips, Valleys,

Gutters etc. stacking of serviceable materials and disposal of

unserviceable materials with all lead and lift.

(ii) A.C. sheet roofing.

Dismentling C.I. pipes G.S.W. pipes and A.C. rain water pipes with

12 12 fittings and clamps including stacking the materials with all lead and 50.00 78.51 Rmt.

lift. (for any dia of pipe)

\\10.65.3.55\d\Jigar Joshi\PAL PALANPORE SPS AUGMENTATION & STRENGTHNING\Tender File\Word File\Schedule -B Pal Palanpore SPS

Item Description Qty. Rate Unit Amount

Providing and cast in situ C.C. in grade M-30 proportions of

ingredients as per mix design by weigh batching using granite,

quartzite trap metal of size 12 mm to 20 mm and or 6 mm to 12 mm

including scaffolding centering formwork, needle vibrated

consolidation, curing and hydraulic testing etc. complete (excluding

cost of reinforcement) with centering and shuttering/deshuttering etc.

comp. up to 6 meter height /depth Av. G.L.for all water retaining

RCC - for top slab( With Shuttering) 0.00 8213.00 C.M.

RCC- for Beam 5.00 8486.00 C.M.

RCC- for Columns 5.00 9317.00 C.M.

RCC - for wall (Above 25cm) 0.00 8083.00 C.M.

Extra for raising/lowering of C.C. for every additional 3 meter of part

thereof in all RCC items of reservoirs or water retaining structures.

Providing & laying ordinary cement con.1:1.5:3 (1cement : 1.5 sand :

3 graded stone agg. 20 mm nominal size) finishing smooth curing etc.

comp. Incld. Cost of form work but excl. Cost of reinforcement for

R.C.C. Work in :

(D) Lintel 2.00 9982.37 C.M.

(E) Chajjas: 2.00 5576.87 C.M.

(F) Vertical Fins 2.00 11613.07 C.M.

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 crushed

16 16 stone agg. 20 m.m Nominal size) & curing comp. incl. cost of from 5.00 4085.83 C.M.

work in: wall caps/ copings.

Providing and fixing IS MARK TMT Bar FE 500 / FE 500D

17 17 reinforcement for R.C.C. work including binding, bending and

placing in position etc. comp.

Ground Floor 750.00 77.29 Kg

Providing Brick work using common burnt clay building bricks

having crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(C) Fly

Providing & Applying 10mm. th. cement plaster in single coat on

brick/ concrete walls similar surfaces for plastering & finished even

19 19 & smooth with a floating coat of cement slurry mixed with admixture

of lime or neeru in required proportion etc. comp. in

C.M 1:3 (1 cement : 3 sand) (A) For wall and similar surfaces

(A) for wall and similar surfaces 50.00 199.28 S.M.

(B) for ceilings and soffits of stairs 50.00 225.34 S.M.

Providing & Applying 20mm thick sand faced cement plaster on on

walls or similar surfaces at all floor levels consisting of 12mm thick

backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick

finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

Providing & Laying white glazed tiles 6mm. th. of Orient, Kajaria,

Jhonson,Nitco,Somani ,Bell make at all floor levels, in flooring,

21 21 treads of steps & landings laid on a bed of 12 mm. Av. 30.00 900.29 S.M.

Th.C.M.1:3(1cement :3 sand) finished with flush pointing in white

cement etc.com. For all floors

Providing & Laying white glazed tiles 6mm th. Of Orient, Kajaria,

Jhonson,Nitco,Somani, Bell make at all floor levels in skirting risers

22 22 of steps & dado on 10 mm. th. C.M.1:3(1cement :3 sand) including 25.00 932.02 S.M.

necessary cement paste for fixing and joined with white cement

slurry etc. complete. For all floors

\\10.65.3.55\d\Jigar Joshi\PAL PALANPORE SPS AUGMENTATION & STRENGTHNING\Tender File\Word File\Schedule -B Pal Palanpore SPS

Item Description Qty. Rate Unit Amount

Providing & Laying green polished kota stone slab flooring at all

floor levels,over 20 mm av.th.base of C.M. 1:6 (1cement: 6 sand) laid

23 23 over & joined with grey cement slurry incl. Rubbing & polishing etc. 100.00 1019.39 S.M.

(A) 25 mm thk For All Floor

Providing & Laying polished kota stone of machine cut edge slab

mm. th. in riser of steps, tread, dedo & pillars center piece not less

24 24 than 1.2 mt.in width &side pieces of equal size as per design, laid on

10 mm.th. C.M.1:3(1 cement:3 sand) joined & polishing etc. For all

for all floor 0.00 1130.79 S.M.

Providing and fixing FRP FRAME size 125 x 65 mm and 35 mm

thick FRP shutter with wood grain raised panneled design finish

shutter having extra reinforcement on sides & edges in Gel coat

finish. The core of the shutter & frmae is to be filed up with injected

polyurethene foam done in situ along with embedded wooden pieces

25 25 for stiffening & also taking hinges & fixtures. The whole FRP frame 15.00 2019.98 S.M.

& shutter is to be water proof weather proof,termite proof

&resistance to mild acid/alkali. Rates are to be inclusive of

S.S.hinges with fastener sleeve & alluminium fixtures & fastentings.

Product should have 3 years performance guarantee and company

have ISO 9001-2000 certificate.

Providing & laying granite slab 18mm thick in Window-Door seal

Frame Etc laid on 10mm thick cement mortar 1:4 (1 Cement :

26 26 Coarse sand) with nessary adhesive material and finished with flush

pointing in white or colour cement, including rubbing & polishing

comp.. (Basic Rate:- Rs.1000.0/S.M.) MR

All Floor 50.00 2026.00 S.M.

27 27 Labour Charges for Edge Finished For Granite

All Floor 50.00 43.43 Rmt.

Providing and fixing window having extruded aluminium Powder

Coated section frame main outer size 63.50 x 38.10 x1.95 mm (of

Jindal section no.4605, @ Wt. 1.094Kg/mt) horizontal Two track

member size 61.85 mm x 31.75 mm x 1.20 mm (of jindal section

no:8687, @ Wt. 0.695 Kg/mt.) vertical member of size 61.85 mm x

31.75 mm x 130 mm (of jindal section no:8758 @ wt. of

kg/mt) with sliding shutters of horizontal member size 40 mm x18

mm x 1.29 mm ( of jindal section no:8949, @ Wt. of .456 Kg/mt)

vertical member of size 40 mm x 18 mm x 1.29 mm (of jindal section

no:8947, @ Wt. of 0.456 Kg/mt/section 8948, @ Wt. of

Kg/mt) with 5 mm thick tranparent bronze colour tineted float glass

with powder coated aluminium fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc. complete for

(A) Same as above but Colour anodized 50.00 1705.67 S.M.

Providing & fixing M.S. Grills of required pattern to wooden frames

of windows etc. at all floor levels with M.S. flats at required spacing

& frame around square or round bars with round headed bolts &

round headed bolts and nuts or by screws incl. Priming coat of Red

lead paint etc. comp.

(A) Plain Grill For all floors

All Floor 100.00 109.41 KG.

Providing and fixing standared extruded of alluminium section of

size 63mm x 38.10mm x1.2mm, @ Wt. 0.643 Kg/mt with colour

Powder Coated alluminium frame for ventilation with 5 mm thick

frosted glass as details etc complete for Ventilation

(A) Same as above but Colour anodized 10.00 1175.56 S.M.

\\10.65.3.55\d\Jigar Joshi\PAL PALANPORE SPS AUGMENTATION & STRENGTHNING\Tender File\Word File\Schedule -B Pal Palanpore SPS

Item Description Qty. Rate Unit Amount

Painting two coat (excluding priming coat) on new steel and other

metal surface with synthetic enemal paint, burshing to give an even

shade including cleaning the surface of all dirt, dust and other foreign

Painting one coat (excluding priming coat) on previously painted

steel and other metal surface with synthetic enemal paint, burshing to

give an even shade including cleaning the surface of all dirt, dust and

other foreign matters.

(A) for wall and similar surfaces 50 39.93 S.M.

Applying two coats of putty and two coats of primer of approved

brand and manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from mortar dropping

and other matter and sand papered smooth.

(A) for wall and similar surfaces 700.00 40.59 S.M.

(B) for ceilings 250.00 40.59 S.M.

Distempering two coats with oil bound washable distemper of

approved brand & manufacture & of required shade on wall surface

to give an even shade over and & including a priming coat of alkali

34 34 resistance primer of approved brand after throughly brushing the

surface to give an even shade after throughly brushing the surface

free from mortar droppings and other foreign matter and also

including preparing the surface even and smooth.

(A) for wall and similar surfaces 500.00 75.84 S.M.

(B) for ceilings 350.00 84.37 S.M.

Providing & applying two coats of weather shield max paint (3 coats

may be required in case of darker colours) of ICI Dulux or Apex

Ultima of Asian Paint including applying exterior acrylic primer coat

35 35 as per manufacturers specification and directions in shade and colour

approved by architects, on exterior surfaces of the building including

scaffolding, preparing the surface, watering, curing etc. complete and

as directed by the architects and manufacturers.

All Floor (M.R.) 500.00 82.00 S.M.

Providing and supplying Medium duty injection adhesive HY200 R

for rebar fixing in Dry conditions for dia upto 32mm. Drilling hole to

the required depth by rotary hammer drill, cleaning with brush and jet

of clean air, filling resin and hardener with standard dispenser in hole

and then fixing the re-bar, The system should be made of two foils

consisting of resin and Hardener foil pack.The installation and the

setting instructions should be strictly followed as per the

manufacturers Recommendations.Reinforcements will be supplied

free of cost at site. (Pull out testing upto 1% of total rebar is to be

produced by manufacturer). as per specification given by HILTI

Providing cement vata (10 cm x 10 cm size) quarter round in cement

mortar 1:1 including neat cement finishing, watering etc. complete

\\10.65.3.55\d\Jigar Joshi\PAL PALANPORE SPS AUGMENTATION & STRENGTHNING\Tender File\Word File\Schedule -B Pal Palanpore SPS

Item Description Qty. Rate Unit Amount

Scaffolding:- Providing, erecting and Dismantelling safe H frame

38 38 and/or Pipe scaffodling including working platform to facilitate all 1900.00 157.00 C.M.

works etc. completed. (Height range as per site condition)

Steel work welded in built up sections, framed work including

39 39 cutting, hoisting, fixing in position and applying a priming coat of red

(A) in beams & joists channels angles, tees, flats with connection

plates or angle cleats as in main & cross beams,hip & trussed purlins 75.00 91.08 KG.

connected to common raffers & the like.

(B) For work like chain link fencing, above compound wall etc. 75.00 91.08 KG.

Providing and fixing and fitting TATA or Jindal make G.I. barbed

wire fencing with necessary barbed wire (12 x 14 guage, weight not

40 40 less than 0.14 kg./mt.) pins, hooks, excluding M.S. angles etc. 75.00 125.00 KG.

complete as per relevent IS specification.& directed by engineer in

Providing and applying cement mortar (1:3) modified by using

polymer and expanding grout additives in required thickness for

repair/strengthening of various RCC elements at all floor levels, lead,

lift, including breaking, chipping, dismentling existing cover concrete

and exposing existing reinforcement, applying wirebrush for making

41 41 surfaces of steel and concrete free from rust and other loose

materials, applying rust removing chemical on existing

reinforcement, applying anticorrosive coating on existing

reinforcement, applying polymer bonding agent on existing concrete

surfaces before applying polymer modified mortar in specified

thickness as directed by the Engineer-in-charge.

The rates shall include providing and applying 12 mm thick cement

mortar (1:4) modified with plasticizer for finishing smooth the

repaired surfaces, providing and applying curing agent on the

repaired surfaces, etc. complete as directed by the Engineer-in-

charge. The make and quality of rust removing chemical, anti-

corrossive coating, polymer bonding agent, polymer and expanding

grout additives, plasticizer, curing agent, etc. shall be approved by

engineer-in-charge. The procedure for application shall be strictly in

accordance with manufacturer's detail specification, which shall be

submitted before start of work and shall be approved by the Engineer-

The rates shall include the cost of providing, erecting and

maintaining leakproof shuttering /formwork /scaffolding, etc. to be

used for the purpose, providing and erecting props, temporary frame

work and maintain them in position for required time, to existing load

bearing elemnts for reliving loads coming on to structural members

being repaired/strengthened but excludes the cost of reinforcement.

Chemical use BASF, Sunanda, Fosroc, Pidilite etc as per

Approved by Engineer-in-charge

Beams / Column / Ceiling

25 mm thickness 3.00 1208.00 S.M.

50 mm thickness 3.00 2348.00 S.M.

\\10.65.3.55\d\Jigar Joshi\PAL PALANPORE SPS AUGMENTATION & STRENGTHNING\Tender File\Word File\Schedule -B Pal Palanpore SPS

Item Description Qty. Rate Unit Amount

Providing and applying cement mortar 1:4 enriched with expanding

grout additive in required proportion in cement for repair of cracks in

RCC and Non-RCC members after making 25mm x 25mm groove,

cleaning the surface and applying coat of bonding, finishing smooth

the repaired surfaces, providing and applying curing agent on the

repaired surfaces, etc. complete at all floor levels as directed by

engineer-in-charge. The make and quality of expanding grout

additives, bonding agent, curing agent, etc. shall be approved by the

engineer-in-charge. The procedure for application shall be strictly in

accordance with manufacturer's detail specification, which shall be

submitted before start of work and shall be approved by the Engineer-

Providing Formwork of ordinary timber planking so as to give rough

finish including centering, Shuttering, Struting and propping etc.

43 43 height of propping and centering below supporting floor to ceiling

not excluding 4m and removal of the same for Cast in situ reinforced

concrete and plain concrete work

(G)Column, pillers, post and strusts

(i)Square rectangular polygonal in plan (upto 10 ton) 850.00 317.52 S.M.

Carrying out Injection grouting for cracks in RCC structural members

by drilling holes of 15 mm diameter upto minimum depth of 75 mm,

fixing aluminium nozzle / rubber pipe using cementitious compound,

injecting polymer modified slurry (SBR+cement+water) 1:1:1

material at specified pressure with grouting pump till it the material

refuses to impregnate inside the hole. If required or suggested by the

44 44 Engineer-in-charge, injection grouting shall be carried out more than

once for a hole to assure proper spreading of grout material and

filling of capillaries / voids within the element. After satisfactory

injection grouting, the nozzle/pipe shall be cut and sealed by non-

shrink epoxy putty. The surface shall be finished smooth with C:M

(1:4) and reinstated to the original condition as directed by the

Engineer-in-charge.

The rate shall include the cost of providing and supplying all tools,

materials, labour, scaffolding, props, formwork, etc. complete. The

make and quality of epoxy grout, epoxy putty, etc. shall be approved

by the Engineer-in-charge. The procedure for application shall be

strictly in accordance with manufacturer's detail specification, which

shall be submitted before start of work and shall be approved by the

Engineer-in-charge. (Actual no of holes and their locations shall be as

decided by the Engineer-in-charge)

chemical use BASF, Sunanda, Fosroc, Pidilite etc as per

Approved by engineer incharge

Carrying out Injection grouting for cracks in RCC structural members

by drilling holes of 15 mm diameter upto minimum depth of 75 mm,

fixing aluminium nozzle / rubber pipe using non-shrink epoxy putty,

injecting epoxy grout material at specified pressure with grouting

pump till it the material refuses to impregnate inside the hole. If

required or suggested by the Engineer-in-charge, injection grouting

shall be carried out more than once for a hole to assure proper

spreading of grout material and filling of capillaries / voids within the

element. After satisfactory injection grouting, the nozzle/pipe shall be

cut and sealed by non-shrink epoxy putty. The surface shall be

finished smooth with C:M (1:4) and reinstated to the original

condition as directed by the Engineer-in-charge.

\\10.65.3.55\d\Jigar Joshi\PAL PALANPORE SPS AUGMENTATION & STRENGTHNING\Tender File\Word File\Schedule -B Pal Palanpore SPS

Item Description Qty. Rate Unit Amount

The rate shall include the cost of providing and supplying all tools,

materials, labour, scaffolding, props, formwork, etc. complete. The

make and quality of epoxy grout, epoxy putty, etc. shall be approved

by the Engineer-in-charge. The procedure for application shall be

strictly in accordance with manufacturer's detail specification, which

shall be submitted before start of work and shall be approved by the

Engineer-in-charge. (Actual no of holes and their locations shall be as

decided by the Engineer-in-charge)

chemical use BASF, Sunanda, Fosroc, Pidilite etc as per Approved by

engineer incharge

Dewatering by pumping set of required capacity including temporary

46 46 platform carting pumping at site and fixing the same in position 10000.00 18.32 HP/Hr

including all accessories, and fuel and labour etc. complete.

Providing and fixing Wash Down Water closet European type W.C.

pan with integral P or S trap including jointing the trap with soil pipe

47 47 in cement mortar 1:1 (1 cement : 1 find sand) (seat and cover to be

measured and paid for separately) (A) Viterous china pattern - I (i) in

approved colour

make: Cera ; Parry Ware ; jaquar ; HindWare 5.00 1356.81 No

Providing & Fixing Wash Hung basin with single hole for pillar tap

Size - 550x400 mm at all floor levels, with C.I. or M.S. Brackets

painted white including cutting holes & making good the same etc.

complete. For all Floor

make - Cera ; Parry Ware ; Jaquar ; Hindware 5.00 3276.63 No

Providing & Fixing C.P. brass pillar cock with copper connection

C.P. brass screws complete.

Make: Cera ; Parry Ware ; Hindware, Jaquar 5.00 1457.97 No

Providing & Fixing PVC SWR Nahni trap IS 14735 for drain -

mm diameter with jali of the following nominal diameter of self

cleaning design with screwed down or hinged grating incl. cost of

cutting making good the walls & floors etc. For all Floor

Providing & Fixing U-PVC pipe (SWR) confirming to IS no.

(Type "B") of Prince/Supreme/Jain/Astral/Tulsi make for soil and

51 51 waste discharge system at all floor levels incl. All fixtures like bends,

tees, shoe etc. jointed with resin of approved brand & manufacture

etc. comp. (M.R.)

(A) 75 mm dia 0.00 412.00 Rmt.

Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary (C.M

1:5) chamber & water tight Pre cast R.C.C. cover of 300mm x300mm

52 52 size (inside) includ. plastering smooth inside & outside 15mm. th' in 5.00 1098.48 No

C.M.1:3 etc. comp. (i) Square mouth traps---(A) 300mm x 300mm

Providing & Fixing to wall, ceiling floor at all floor levels, galvanised

mild steel tubes (medium grade) TATA / ZENITH / ASIAN /

JINDAL MAKE of the following nominal bore, tube, fittings &

clamps incl. making good the wall ceiling and floor etc complete.

\\10.65.3.55\d\Jigar Joshi\PAL PALANPORE SPS AUGMENTATION & STRENGTHNING\Tender File\Word File\Schedule -B Pal Palanpore SPS

Item Description Qty. Rate Unit Amount

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/ Jain/

Astral/ Tulsi/Finolex make for water supply line at all floor levels

incl. fixtures like bends, tees, shoe etc joined with resin of approved

brand & manufacture etc. comp. Pipe shall be fixed on the wall the

help of Z-clamp at every two meter C/C or shall be concealed as

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all

Providing & Fixing 15 mm Dia bib tap with wall Flange at all floor

levels, polished brigth etc, compl.

Make: Cera ; ParryWare ; HindWare 10.00 1353.77 No

Providing & fixing 15mm C.P. brass angle valve (Stop Cock) with

C.P. copper connecting pipe 450 mm long and nuts, washer and brass

flange complete, including cutting and making good the wall where

Make: Cera ; ParryWare ; HindWare 5.00 1564.36 No

Providing and fixing abonite ball cock of approved qualities directed

Providing & fixing U-PVC pipes Confirming to IS no. 13592 (Type

"A") of Prince/Supreme/Jain/Astral/ Tulsi/Finolex make for rain

58 58 water at all floor levels incl. fixtures like bends, tees, shoe etc joined

with resin of approved brand & manufacture etc. comp.

Providing & fixing G.I. Rain water spout of 50 mm. Dia & 30 cm

All floors level 4.00 101.91 No

Providing and fixing Z-clamp at all floor levels of approval design to

60 60 C.I. S.C.I. or P.V.C. pipes including the cost of cutting holes and

making good the wall etc.Complete -

C) 110 mm dia to up to 150 mm dia 15.00 90.00 No

D) 150 mm to 200 mm dia. 15.00 98.00 No

Providing & Fixing in position PVC Cowl vent to pipes of

Prince/Supreme/Jain/Astral/Tulsi/Finolex make etc. Comp.

(1) The whole work is to be executed through specialised agency with a

guarantee of 10 years given no a prescribed proforma duly stamped

(2) the rate shall include for work at all floors and conducting water proof

test as directed.

\\10.65.3.55\d\Jigar Joshi\PAL PALANPORE SPS AUGMENTATION & STRENGTHNING\Tender File\Word File\Schedule -B Pal Palanpore SPS

Item Description Qty. Rate Unit Amount

(A) Providing and laying water proofing treatment to vertical and horizontal

surfaces of depressed portions of W.C.,kitchen and water tank the like

consisting of :

(a) I course of applying cement slurry @ 4.4 kg/sqm mixed with water

proofing compound conforming to IS:2645 in recommended proportions.

(b) II course of a layer of plaster in C.M. 1:3 with water proofing compound

confirming to IS:2645 about 25 mm. th' in the floor of the depression &

about 18mm th' On the side walls of the depression up to the floor level, 1500.00 296.00 S.M.

water proofing plaster about

mm. th' be continued on the walls above the floor level for a height of

mm. with surface suitable to receive further treatment

(c) Finishing top with stone aggregate 10mm to 12mm nominal size

spreading @0.008 C.M./S.M., thoroughly embedded in plaster layer.

as per specifications & instructions of Engineer in charge (Cement

Consumption 0.316 Bags/S.M.)

(B) Providing and laying integral cement based water proofing treatment

including preparation of surface as required for treatment of roofs,

balconies, terraces etc. consisting of following operations.

(a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of

cement admixed with proprietary water proofing compound comforming to

IS:2645 over the R.C.C. slab including cleaning the surface before tratment.

(b) Laying cement concrete using broken bricks/brick bats 25 mm to

mm size with 50% of cement mortar 1:5 (1 Cement : 5 Coarse sand)

admixed with proprietary water proofing compound conforming to IS:2645

,brick bats is finally covered by jointless cement plaster 20mm th. in C.M.

1:4 added with special water proofing compound confirming to IS:2645 &

top smooth finished with trowel with false chequered marking of

mm.size.The treatment is carried along the vertical surface of the parapet &

other adjoining wall up to height of about 300 mm in a shape of quarter

round vata Incl. curing etc. Comp. With average thickness of 120 mm and

minimum thickness at khurra as 65 mm.

(c) The whole terrace so finished shall be flooded with water for a minimum

period of two weeks for curing and for final test. All above operations to be

down in order and as directed and specified by the engineer-in-charge. With

average thickness of 120 mm and minimum thickness at khurra as 65 mm.

Providing and filling in depressions of Bath and W.C. At all floor

63 63 levels, after completing plumbing work of pans, pipes,traps etc. With 5.00 500.00 C.M.

cinder or fly ash as directed by Engineer in charge etc. comp.

Providing Flush Cock consisting lever, cartridge sleeve & flange &

Make: Cera ; ParryWare ; Hindware 5.00 2056.47 No

Providing and Laying Broken China mosaic flooring for terrace using

12 mm to 20 mm broken pieces of glazed tiles to be laid over cement

mortar 1:3 to plain or slope and to be tempered to bring mortar crème

out upto surface using white cement including rounding off junctions

and extending them upto 15 cm along the wall, clearing with water

and oxalic acid etc. as directed.

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) &

66 66 disposal of the surplus excavated soil as directed within a lead of

M. For following diameter of piles.

Providing and filling rubbles including hand packing and filling

67 67 interstices with quarry spoils behind abutments and between returns 0.00 1094.11 C.M.

Providing & laying cement concrete 1:4:8 (1 cement:4 sand:8 graded

stone agg. 40 mm nominal size) & curing comp. incl.cost of form

(A) Foundation and Plinth

\\10.65.3.55\d\Jigar Joshi\PAL PALANPORE SPS AUGMENTATION & STRENGTHNING\Tender File\Word File\Schedule -B Pal Palanpore SPS

Item Description Qty. Rate Unit Amount

Providing & laying ordinary cement con.1:1.5:3 (1cement:1.5sand:

graded stone agg. 20 mm nominal size) finishing smooth curing etc.

comp. Incld. Cost of form work but excl. Cost of reinforcement for

R.C.C. Work in : Up to G.L./P.L.

(1)Having c/s area up to 0.08 sq.mt 0.00 12844.32 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 0.00 11166.97 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 15.00 9201.68 C.M.

(1)Having c/s area up to 0.08 sq.mt 0.00 9102.61 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 0.00 8174.41 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 20.00 7086.88 C.M.

Providing & filling with Mix soil in layers of 20 cm. Th'. Incl.

watering, ramming & consolidation etc. complete.

Providing and laying cement concrete flooring 1:2:4 (1 cement :

71 71 course sand : 4 graded stone aggregate 20mm nominal size) laid in

one layer finished with a floating coat of neat cement

(A) 40mm thick 50.00 319.03 S.M.

(A) 50mm thick 100.00 374.14 S.M.

Providing & fixing 35mm.th. Flush Door Solid Double Core type

Both Face water proof Ply Vennered & 1.5 mm th.laminate shall be

pasted on both side with adhesives as specified by the manufacturers.

72 72 The laminate shall be as per approved shade & texture, of make incl. 30.00 3720.00 S.M.

Sal wood frames of finished size 12cm x 7cm.incl. S.S. Hinges with

nessary screws & Anodized aluminum fixtures & fastenings For all

Same as Above But Without Frame 0.00 2520.00 S.M.

Providing and fixing 35mm thick shutters for Doors, windows and

clearstory windows including anodised alluminium butt hinges with

necessary screws.

(A) Indian teak wood. (i) Fully Panelled.

Providing & fixing colouron galvaniced steel, zinc / aluminium allus

coated sheet 0.5 mm. thick roofing fixed with gslvanised grom J or L

74 74 hook bolts and bolt 8mm dia with bituman and impet washer filled 15.00 999.00 S.M.

with white lead etc. Excluding the cost of purlins rafter and

trusses.(TATA or Jindal Make)

Providing & fixing 150mm wide 450mm over all semicircular plain

G.I. sheet class-3 gutter with iron brackets 40mm x 3mm size bolts,

75 75 nuts, washers etc. including marking necessary connection with rain 15.00 412.00 R.M.

(i) 0.63mm thick

Providing ridges or hips 600mm over all in plain G.I. sheet fixed with

76 76 G.I. "J" of "L" hooks bolts and nuts 8mm dia G.I. limpet and bitumen 0.00 464.00 R.M.

washer complete (1) 0.63mm thick sheet

Providing and Fixing Hollow steel Sections Framed Work including

77 77 Cutting,Hoisting, Welding & Fixing in position Purlin, Main Chord 100.00 126.00 Kg

etc. as per Engineerin-charge.TATA/ JINDAL/ ASIAN Make

\\10.65.3.55\d\Jigar Joshi\PAL PALANPORE SPS AUGMENTATION & STRENGTHNING\Tender File\Word File\Schedule -B Pal Palanpore SPS

Item Description Qty. Rate Unit Amount

Providing and fixing rolling shutters of approved make made of

mm wide M.S. laths inter locked together through their entire lenght

and jointed together at the ends by end locks mounted on specially

78 78 designed pipe shaft with bracket plates, guide channels and 50.00 3554.40 S.M.

arrangements for inside and outside locking with push-pull operation

including the cost of hood cover and spring etc. complete

(A) Shutters having width below 3.5 M.

Providing, erecting and fixing double coated Sintex/Super/Reno PVC

79 79 (ISI) mark water tank of required capacity each with all necessary 5000 3.95 lit.

fittings & connection etc. complete on terrace.

Providing & fixing Urinal or approved quality including conecting

80 80 the Urinal with waste pipe, tap etc. complete. (A) White earthenware 2.00 1,074.86 No.

flat back or corner type size 430 mm x 260mm x 350mm

(A) Cement plaster 20 mm thick in C.M. 1:2 using water proofing

compound of approved quality including finishing etc. complete.

(B) -do- without water proofing compound 300.00 195.00 S.M.

Total Estimate Amount Rs.

Note:- Rate Quoted by bidder shall be inclusive of all taxes but Excluding GST. GST shall be paid extra as per prevailing rules.

Executive Engineer

Drainage Department

Surat Municipal Corporation

\\10.65.3.55\d\Jigar Joshi\PAL PALANPORE SPS AUGMENTATION & STRENGTHNING\Tender File\Word File\Schedule -B Pal Palanpore SPS