8739 REPAIR, MAINTENANCE TO SUB MAIN WIRING, DISTRIBUTION BOARDS ETC IN TECHNICAL AND DOMESTIC AREAS AT AF STATION, BAREILLY

Amount

Taking down carefully aluminum/ copper sub main wiring complete including conduit and conduit accessories all as specified.

M&L for sub main wiring concealed complete with two runs of 1100 Volts grade 4 sq.mm (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade drawn through and including 25mm dia non metallic rigid PVC conduit and conduit accessories concealed in walls/ roofs/ floors etc. with one run of 1100 Volts grade 4 sq.mm (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade as earth continuity conductor all as specified. [Note:- M&L for cutting chases for concealed conduit wiring on any surfaces and making good disturbed surfaces to match with the existing surfaces in cement mortar 1:3 and finishing with existing finishes shall be deemed to be included in the quoted rate.]

All as per Item No. 2 herein before, but with 2 runs of 1100 Volts grade 6 sq.mm (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade with one run of earth continuity of same cable as for wiring.

All as per Item No. 2 herein before, but with 2 runs of 1100 Volts grade 10 sq.mm (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade with one run of earth continuity of same cable as for wiring.

S&F sheet steel powder coated distribution board Vertical type TPN 8 ways, 415 volts, with 200 Amps rated copper bus bar, neutral link, earth bar, IP 43 protection and double door, suitable for mounting MCCB up to 160 Amps as incomer and MCBs as out going complete including taking down existing unserviceable DB embedded in wall, grouting the new DB and making good the disturbed surfaces and applying finishes to match the existing all as specified and as directed. [Cat No. 5077 47 of make Legrand/ Cat No. DBVTH008DD of Make: L&T]

S&F sheet steel powder coated distribution board Vertical type TPN 6 ways, 415 volts, with 200 Amps rated copper bus bar, neutral link, earth bar, IP 43 protection and double door, suitable for mounting MCCB up to 160 Amps as incomer and MCBs as out going complete including taking down existing unserviceable DB embedded in wall, grouting the new DB and making good the disturbed surfaces and applying finishes to match the existing all as specified and as directed. [Cat No. 5077 46 of make Legrand/ Cat No. DBVTH006DD of Make: L&T]

S&F sheet steel powder coated distribution board Vertical type TPN 4 ways, 415 volts, with 200 Amps rated copper bus bar, neutral link, earth bar, IP 43 protection and double door, suitable for mounting MCCB up to 160 Amps as incomer and MCBs as out going complete including taking down existing unserviceable DB embedded in wall, grouting the new DB and making good the disturbed surfaces and applying finishes to match the existing all as specified and as directed. [Cat No. 5077 45 of make Legrand/ Cat No. DBVTH004DD of Make: L&T]

S&F MCCB 4 pole, 125 Amps, 16 KA, 415 Volts with thermal magnetic release connecting up with necessary spreader links complete all as directed.

S&F MCCB 4 pole, 100 Amps, 16 KA, 415 Volts with thermal magnetic release connecting up with necessary spreader links complete all as directed.

S&F MCCB 4 pole, 160 Amps, 16 KA, 415 Volts with thermal magnetic release connecting up with necessary spreader links complete all as directed.

S&F sheet steel powder coated distribution board TPN 4 ways, 415 volts, with 200 Amps rated bus bar, neutral link, earth bar, double door with IP 43 protection, suitable for mounting MCBs all as specified and as directed including taking down existing unserviceable DB embedded in wall, grouting the new DB and making good the disturbed surfaces and applying finishes to match the existing all as specified and as directed.

S&F sheet steel powder coated distribution board SPN 4 ways, 240 volts, with 200 Amps rated bus bar, neutral link, earth bar, double door with IP 43 protection, suitable for mounting MCBs all as specified and as directed including taking down existing unserviceable DB embedded in wall, grouting the new DB and making good the disturbed surfaces and applying finishes to match the existing all as specified and as directed.

S&F sheet steel powder coated distribution board SPN 8 ways, 240 volts, with 200 Amps rated bus bar, neutral link, earth bar, double door with IP 43 protection, suitable for mounting MCBs all as specified and as directed including taking down existing unserviceable DB embedded in wall, grouting the new DB and making good the disturbed surfaces and applying finishes to match the existing all as specified and as directed.

S&F sheet steel powder coated distribution board SPN 12 ways, 240 volts, with 200 Amps rated bus bar, neutral link, earth bar, double door with IP 43 protection, suitable for mounting MCBs all as specified and as directed including taking down existing unserviceable DB embedded in wall, grouting the new DB and making good the disturbed surfaces and applying finishes to match the existing all as specified and as directed.

S&F MCB SP, 240 volts, 6 to 32 Amps, 'C' curve, 10 KA all as specified and as directed.

S&F MCB TPN 63 Amp, 10 KA, 'C' curve, 415 V AC.

S&F MCB FP 100 Amp, 10 KA, 'C' curve, 415 V AC.

S&F MCB SPN, 240 volts, 40 to 63 Amps, 'C' curve, 10 KA all as specified and as directed.

S&F in repairs single pole and neutral sheet metal enclosure with two pin and earth plug and socket with one single pole MCB 20 Amps 240 Volts complete all as directed.

S&F LED flood light luminaire, with high power LEDs not less than 70 watt with pressure die cast aluminium housing & heat resistant toughed glass (IP 66 protection) with system lumen efficacy ≥ 110 Lum / Watt, with operating voltage range 140 - 270 V AC, 50Hz ± 3Hz, Surge protection >3KV including driver and connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm from MCB to flood light for controlling the flood light complete all as specified and as directed including taking down existing unserviceable light fitting. [Cat No. LF19-931-060-57-XX of make: Wipro/ Cat No. JETAALBAFLOODLIGHT70W of make: Havells/ Cat No. BVP120 LED 70 CW FG S1 PSU GR of make: Philips]

S&F suspended/ surface type High bay luminaire not less than 140 Watt, environmental friendly, energy saving long life corrosion resistant vertical surface mounting pressure die-cast aluminum housing and control gear with high power LED with all mounting accessories for fixing to truss of hangar/ MT garage etc complete prewired with flexible 3 core 2.50sq.mm size stranded copper conductor cable from light fitting to ceiling rose complete all as specified and as directed including taking down existing unserviceable light fitting. [Model: SAUSERPLUSHBP150WLED85790DTOLTG of make: Havells or BY415P LED160S CW HE WB FG PSU GR XTFCL S5 of make Philips or LH17-232-060-50-XX of make: Wipro]

S&F energy efficient street light fitting not less than 70W, with pressure die cast aluminum housing, heat resistant glass, IP-65 consisting of high power LED, control driver etc. along with necessary cable connection with 3 Core 2.5 sq.mm copper cable, including 40mm dia GI pipe bracket, bolts, nuts etc. fixed to walls complete all as specified and as directed including taking down existing unserviceable light fitting. [Cat No. BRP062 LED 84 CW SLC S1 PSU of make: Philips or Cat No. ENDURAOMNIPLUS SL70WLED 757SASYTOPC of make: Havells/ Cat No. LR07-781-XXX-57-XX of make Wipro]

M&L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm thick buried directly in ground (earth pit not less than 2.25m below ground level) with top edge of earth plate not less than 1.50m below normal ground level, connected to galvanized earth lead 4mm dia all as shown on electrical plate No. 3 of MES schedule 2009, Part–I (Specifications) and connected to main switch board/ main DB’s/ earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust & common salt all around the earth plate 150 mm in all directions with & including watering pipe 20mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50 mm thick precast RCC cover of size 450 mm X 450mm with 1:2:4, type B-1 duly reinforced with 8mm dia TMT steel bars @ 150mm c/c both ways with suitable lifting handle made of 10mm dia mild steel round bars to lift the cover, earth pit of PCC 1:3:6 type C-1, GI protection pipe light grade 15mm bore including testing on completion of job complete all as specified and directed.

Deduct: Amount of Schedule of Credit b/f from Sl. Page No. 16 of tender document i.e. Rs. 46,725.00

S S ELECTRICALS

SONI ENTERPRISES

M/S BABA ENTERPRISES

ZAIGHAM ENTERPRISES

Vishal Traders

M/s Agarwal Builders