SPECIAL REPAIR TO BLDG NO A 20 21 PATIENT COOK HOUSE AT MH RANIKHET UNDER GE RANIKHET

Amount

BOQ ( Sch 'A') B/R items Dismantling plain or corrugated steel sheeting, any thickness including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall , fixed with self tapping screw complete all as specified and directed

S&F Pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall , fixed with self tapping screw complete all as specified and directed.

Dismantling of timber scantling 40 Sqcm and over in section in any position as in framed/unframed work complete all as specified and directed.

Dismantling of boarding, any description, fixed in any position with nails complete all as specified and directed.

M & L for mild steel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 290 Gde E -165 complete all as specified and directed.

S&F 20mm thick 2nd class soft wood (Chir) boarding plained one side fixed with butt joints with nails in any situation/ position except flooring and skirting complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding layer in CM 1:6 to receive floor finishes complete all as specified and directed.

M&L for 10 mm thick rendering in CM 1:4 to vertical surface complete all as specified and directed.

M&L for 300x450x7mm thick glazed digital ceramic tiles coloured including highlighter tiles , design and pattern as approved fixed as in vertical surface etc, set and jointed in neat cement slurry and pointed with white cement with colour pigment to match complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tiles exc. 0.11 sqm but n.exc. 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement with colour pigment complete all as specified and directed.

M & L for black Granite (of any type) tiles 20 mm thick machine cut , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishig as in cooking platforms and like Complete all as specified and directed.

M & L for Kota stone slab 20-25mm thick as in vertical surfaces such as floor , riser of steps, skirting, dado and pillar laid over cement screed and jointed with with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing Complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or PCC blocks or stone wall or concrete surface etc including racking out joints, hacking for keys, scrubbing down with water etc all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on wall surfaces of brick work, finishing the surfaces fair and even complete all as specified and directed.

M&L for 15 mm thick rendering in CM (1:4) mixed with WPC @ 3% by weight of cement finished even and smooth without using extra cement with additional thickness is provided as floating / setting coat in vertical surfaces all as specified and directed.(NOTE- WPC shall be measured and paid seperately)

M&L for applying a layer of JK/ Birla putty on wall surfaces including cornics etc for proper levelling of plaster and applying two coats of oil bound distemper over a coat of chalk whitening on new surface complete all as specified and directed.

M&L for finishing walls with Acrylic Smooth exterior paint of required shade : New work/old work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection laid to slope in bays and finishing the surfaces of concrete topping fair and even and exposed edges fair or rounding or chamfering laid in panels incl necessary form work complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.

M&L for extra for forming fair finished drain or channels 30cm inner girth in cement concrete using extra cement including forms, moulds mitred/stopped ends etc all as specified and directed.

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M in depth for foundation, laying underground cable, etc., and getting out in Hard/ Dense soil complete all as specified and directed.

Demolition and breaking up drain pipes 150 mm (salts glazed ware ,AC or Reinforced concrete) set in cement mortar all as specified complete all as specified and directed.

M & L for 150 mm dia Salt Glazed stone ware drain pipes Grade-A laid in trenches and jointed as specified complete all as specified and directed.

M & L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150mm bore complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in hard/dense soil complete all as specified and directed.

Removing Excavated soil to a distance exceeding 250 M but not exceeding 1.50KM and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) finished fair and even as in sub base Complete all as specified and directed.

M&L for chequred cement concrete tiles of size 300x300x25 mm thick coloured rubber pressed glossy finish, set and jointed in neat cement slurry and pointed in white or colour cement and match the surace of tiles as foor/steps, complete all as specified and directed.

Taking down chowkats or frames exc 1.5 Sqm but not exc 4 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkats or frames not exc 1.5 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

S&F 2nd class hard wood (SAL) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints and fixed to any position complete all as specified and directed.

S&F factory made 35 mm thick flush shutter solid core construction with block board and ply wood face commercial type complete all as specified and directed.

S&F factory made 35mm thick IInd class hard wood glazed and skelton shutters open rebated and prepared to receive glass, guage etc, with out sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, guage etc, size of members of shutters as specified in MES SSR Part-I, Section 8, Clause 8.24 (a) complete all as specified and directed.

S&F factory made 30mm thick IInd class hard wood glazed and skelton shutters open rebated but divided into squares with plain chamfered or rounded mitred and sash bars and prepared to receive glass, guage etc, with out sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, guage etc, if window, ventilators etc are provided with stiles and rails as specified size of members of shutters as specified in MES SSR Part-I, Section 8, Clause 8.24 (b) complete all as specified and directed.

S&F factory made soild PVC door frame of size 50mmx47mm made out of 5mm thick single side prelam PVC sheet reinforced with mild steel square tube and edges will be painted to match with single side prelam sheet as per specification and drawing given on MES schedule Part-II (2020) complete all as specified & directed.

M&L for Pre laminated exterior grade both side laminated board , 19/20 mm thick, grade 1 quality, exterior grade,Commercial type , fixed with screw to timber frame work in cup board shutters/shelves complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames, glazed with putty or fixed with beads including punching or drilling out old glazing pins/spring clips and providing and fixing new ones all as specified complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and directed.

S&F in repairs of galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S&F 100 mm size aluminium handle plate type anodised complete all as specified and directed.

S&F 100mm size MS butt hinges, medium weight, cold rolled and fixed complete all as specified and directed.

S&F 75mm size MS butt hinges, medium weight, cold rolled and fixed complete all as specified and directed.

S&F 150mm long Aluminium tower bolt and fixed complete all as specified and directed.

S&F 100mm long Aluminium tower bolt and fixed complete all as specified and directed.

S&F 250mm long Aluminium sliding door bolt, bolt type with bright bolt not less than 12mm dia with and including a minimum of 6 bolt and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

Supply and fix Continuous (piano) hinges width 30 mm mild steel , bright finish or eletrogalvanised complete all as specified and directed

Taking up or down 15mm dia steel tubing and connections by disconnecting fittings/tubing from existing tubing where required including cleaning for refixing or removal from site complete all as specified and directed.

Taking up or down 20mm dia steel tubing and connections by disconnecting fittings/tubing from existing tubing where required including cleaning for refixing or removal from site complete all as specified and directed.

M&L for 15mm bore GI tubing, medium grade, galvanised with and including all GI fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Cutting chases for water tubing for concealed , etc, and making good to facings where required and plastering in cement mortar (1:4) cutting not exceeding 10cm girth in brick walls complete all as specified and directed.

M&L for 20 mm bore GI tubing, medium grade, galvanised with and including all GI fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repair 15mm dia bib tap long body CP, screwed for iron pipes complete all as specified and directed

S&F in repairs angle cock 15 mm bore brass chromium plated, screwed both ends for pipes or for unions including making good to match with existing surface complete all as specified and directed

S&F in repairs pillar taps 15 mm bore, Brass chromium plated , screwed down high pressure with or without letter HOT or COLD with long screwed shanks and fly nut complete all as specified and directed

S&F in repair polymer white (polypropeylene Delrin and ABS) low level flushing cistern 10 Ltrs capacity, valveless, syphonic action type complete with inlet, ball valve float valve, bends brackets, rawl plug, brass screws handle etc complete, complete all as specified and directed.

S&F in repairs, 550x400mm white vitreous China, wash hand basin , flat back with pedestal excluding trap and waste chain and plug and porcelain stopper including sutaible size brackets waste pipe and waste coupling complete all as specified and directed.

S&F white in repairs vitreous china squatting pan, 'Orissa' pattern, size 580mm x 440mm, white, with integral foot rests with 'P; or 'S' trap, including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. in reapairs including Provn of lime concrete bedding and making good to floor complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Dismantling water tanks of any description, capacity exceeding 500 litres but not exceeding 1000 liters complete all as specified and directed.

S&F Green Colour rotational moulded polyethylene water storage tanks, (Cylindrical vertical with closed top )hoisted and fixed in position, 1000 liters capacity, three layered complete all as specified and directed.

S&F in repairs 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed.

Demolition of brick work or stone masonry or precast PCC block walling built in cement mortar complete all as specified and directed.

M&L for brick work with sub class 'B' bricks using old size bricks straight or curved on plan exc 6 mtr mean radius, built in CM 1:6 all as specified and directed.

S&F in repairs Hot & cold mixer CP with long swan neck for WHB complete all as specified and directed.

Dismantling of wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards / slabs / blankets, any thickness including cover fillet complete all as specified and directed

S & F powder coated Aluminium anodised snap grid frame work for false ceiling comprising of following section for making partitions of 600 X 600 mm size fixed to walls with rawl plugs and screws and hang to roof with 2 mm dia in double layer GI wire suspender of suitable length and butterfly clips size of main tee shall be :- (i)37mmx24mmx0.3mm thick, (ii)Cross Tee 28mmx24mmx0.3mm thick and (iii)Wall angle 24mmx24mmx0.3mm thick.

S & F 4 mm thick disigner ceiling (E-board classic) board / tiles for insulation and accoustic purpose, 595 X 595 mm size fixed with staples on snap grid as in ceiling with and complete all as specified and directed

BOQ ( Sch 'A') E/M items Taking down carefully aluminium/copper wiring of any size (for light, fan, socket or power etc complete) ( fittings such as switches, sockets, ceiling roses, pendent holders regulators, tube lights etc to be measured and paid separately) and making good disturbed surfaces of wall, roof etc to match with existing surface complete all as specified and directed.

S & F point wiring for one light point / fan point / bell point / 5 Ampere socket outlet point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable (FRLS) drawn into and including medium grade PVC conduit concealed (not less than 20 mm dia) all necessary fittings and accessories fixed concealed (including chase cutting in brick/stone masonery wall for fixing conduit and plastering the external surfaces and matching the same with existing suface) and sunk cast iron or pressed steel terminal boxes for mounting fitting like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size FRLS copper conductor cable (multi stranded) as in earth wire and connected to common earth dolly complete all as specified and directed :- (a) One light/one fan/one bell point controlled by one, one way switch.

All as per item No 73 above but one socket outlet 5 pin 5 Amp controlled by one, one way switch on same board complete all as specified and directed.

All as per item No 73 above but one socket outlet 5 pin 5 Amp controlled by one, one way switch on independent board complete all as specified and directed.

All as per item No. 73 above but wiring with using cable 2.50 sqmm size multi stranded copper wire (FRLS) and earth wire of PVC insulated (Green colour) 1.50 Sqmm size FRLS multi stranded copper wire for one 6 pin socket outlet, 16 Amperes on independent board complete all as specified and directed.

S&F switch piano flush type single pole, one way 5 Amp complete all as specified and directed.

S&F socket out let multi 5 pin, 5 Amps, flush type complete all as specified and directed.

S&F switch piano flush type single pole, one way 15 Amp complete all as specified and directed.

S&F socket out let 2 in1,3 pin, 5 and 15 Amp, flush type complete all as specified and directed.

S&F ceiling rose, PVC/ Poly carbonate,isolated body three terminal complete all as specified and directed.

S & F lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed.

Taking down unservicable MCB and S&F MCB SP, 240 volts,AC C curve, 10 KA 6 to 32 Amps complete all as specified & directed.

Taking down unservicable MCB and S&F MCB SPN , 240 volts,AC B curve, 10 KA 40 Amps complete all as specified & directed.

Supply and fixing LED bldg security light fitting 35 /36 Watt 230 V, AC, outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete all as specified and directed .

Taking down unservicable DB and S&F sheet metal enclusure for DBs(double door type) single pole and neutral 12 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed .

S & F LED bulk head fitting, 1 x 10 watt with PDC aluminium housing and milky diffuser including LED light driver holder, complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230 Volts, 50 Hz complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V, AC, decorative type with driver holder and LED lamp including connecting up with two core flexible copper conductor cable of suitable size complete all as specified and directed

S&F sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 240 Volts 20 Amps complete all as specified and directed.

M&L for earthing complete with galvanised steel, earth plate electrode 600x600mm x 6mm thick burried directly in ground verticaly (earth pit not less than 2.25 mtrs below ground level ) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron/steel all as shown in electrical plate No 3 on page 497 of MES schedule 2009 part - I connected to main switch board/main DBs/earthing test point including all necessary excavation and earth work in hard/dense soil common salt and charcoal dust mixed and packed 150mm thick all round the GI earth plate, watering pipe 20mm dia GI medium grade. GI sheet 0.63 mm thick funnel, wire gauge, 50mm thick RCC cover in PCC 1:2:4 type B1 duly reinforced with MS round bars 6mm dia @ 150c/c both ways and pit/chamber in PCC 1:3:6 type C1 with suitable lifting handle to cover, GI protection pipe 15mm dia light grade up to 7.5mtr from electrode GI pipe to be fixed with complete all as specified and directed. Note :- (i) Earth lead beyond 7.5 mtr from electrode to earth terminal point/main switch & GI pipe light grade 15mm dia for protection against mechanical damage to lead shall be measured separately. (ii) On testing after completion if desired earth resistance is not obtained, the earthing will be redone at no extra cost by the contractor.

S& F LED Bulb of 9 watt with minimum 5 years warrantee complete all as specified & directed.

S&F Exhaust fan metallic body ISI mark, 450 mm size with louvers including cutting openings, through brick/ stone wall , making of holes and grouting of suitable size of nuts and bolts for 450 mm exhaust fan and making good dismantled portion and making connection with wire of suitable size and connecting accesssories complete all as specified and directed.

S&F Exhaust fan metallic body ISI mark, 380 mm size with louvers including cutting openings, through brick/ stone wall , making of holes and grouting of suitable size of nuts and bolts for 380 mm exhaust fan and making good dismantled portion and making connection with wire of suitable size and connecting accesssories complete all as specified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece, etc. complete all as specified and directed.

Supply, laying, jointing and commissioning LT XLPE 1100 volts 16 sqmm 2 core grade heavy duty under ground cable PVC insulated,strandred aluminium conductor served with inner sheathing of PVC tape, armoured with GI steel or tape and over all PVC sheathing laid in trenches, floor through pipes, in duct on pole and roads etc. complete all as specified and directed.

Removing of surplus soil to a distance not exceeding 50 Mtr and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed.

M&L for sand cushioning in trenches spreading and consolidation 8cm thick before laying the cable & 15 cm of sand after laying the cable complete all as specified and directed. Note: Punned thickness of sand shall be measured and paid.

M&L for laying of bricks well burnt sub class ‘B’ (old pattern) laid flat for cable protection width equal to the lengrth of brick complete all as specified and directed.

M & L for galvanised steel water tubing 'light grade' 25 mm bore with all GI fittings laid under the roads, drains, culverts and fixed on poles etc complete all as specified and directed .

Supply and fixing LED batten light fitting 20W, 220V,with microwave motion sensor based technology with aluminium housing & integrated electronic driver of make Havells with Cat part No LUMILINESMART20WLED865PCWH or equivalent approved make of C&S, Bajaj, Philips, Wipro, Eveready complete all as specified & directed.

M/S NAYAL ELECTRICALS

Builders Harpal

M/s RN Kharwar & Sons

aditya construction