Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹40.7 LAccepted-AOC 24B JYOTISH ROY ROAD KOLKATA 700053 | KOLKATA | WEST BENGAL | 700053 | L-1 | Accepted-AOC Being L 1 | |
| 2 | L-2₹44.1 L+₹2.2 L (5.19%)Rejected-Finance NEAR KRIPAN GATE PO BINNAGURI DIST JALPAIGURI W B PIN 735203 | JALPAIGURI | WEST BENGAL | 735203 | L-2 | Rejected-Finance Being L 2 | |
| 3 | L-3₹44.2 L+₹2.3 L (5.51%)Rejected-Finance NEAR KRIPAN TCP GATE PO BINNAGURI DIST JALPAIGURI PIN 735203 W B | JALPAIGURI | WEST BENGAL | 735203 | L-3 | Rejected-Finance Being L 3 | |
| 4 | L-4₹44.5 L+₹2.5 L (6.00%)Rejected-Finance P O BINNAGURI 735203 DISTT JALPAIGURI W B | JALPAIGURI | WEST BENGAL | 735203 | L-4 | Rejected-Finance Being L 4 | |
| 5 | L-5₹45.0 L+₹3.0 L (7.24%)Rejected-Finance NEAR KRIPAN GATE BINNAGURI DIST JALPAIGURI W B PIN 735203 | JALPAIGURI | WEST BENGAL | 735203 | L-5 | Rejected-Finance Being L 5 |
Tender Value
₹44.6 L
EMD Value
₹89,200
Closing Date
15 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH BINNAGURI
GE North Binnaguri Post Binnaguri Dist Jalpaiguri West Bengal PIN - 735232
PROVISION OF CERTAIN REVENUE AND MINOR WORKS AT CENTRAL ZONE UNDER GE NORTH BINNAGURI
2022_MES_539013_1
NIT No. 8701/ 29/ 2022-23 / 14 / E8
Open Tender
Miscellaneous Works
Item Rate
180 days
BINNAGURI
As per Tender Documents Class D Category a(I)
8 documents required · 8 mandatory
₹500
GE NORTH BINNAGURI
₹89,200
Yes
7 Nov 2022
18 Jul 2022
18 Aug 2022
18 Jul 2022
15 Aug 2022
2 Aug 2022
Amount
SCHEDULE `A' ( CIVIL WORK) Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil all as specified and directed.
Surface dressing n.exc (not exceeding) 15 cm deep and getting out in soft/loose soil all as specified and directed.
Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundations etc. or for shafts, well cess pits, manholes,pier holes,sewage line, UG cables etc. but not exceeding 10 sqm on plan getting out in soft/loose soil complete all as specified.
Returning ,filling in , including spreading , levelling , watering and well ramming in layer not exceeding 25 cm thick in soft/ loose soil complete all as specified.
Removing excavated material (soils) not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified.
Material and labour for PCC (1:4:8), type D-2 (using 40 mm graded crushed stone aggregate ) as in foundation , mass concrete complete all as specified.
Material and labour for brickwork with fly ash bricks, old size, having compressive strength 75Kg sqcm, straight or curved on plan excd 6 M mean radius in built in cement and sand mortar 1:6 complete all as specified.
Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces , in cement and sand mortar 1:4 using water liquid water proofing compound @ 200 ml per bag of cement or as per manufacturer's instructionscomplete all as specified top surfaces finished fair and even complete all as specified. (WPC shall be measured and paid separately)
Material and Labour for rendering 15 mm thick on other than fair faces of brick or concrete surfaces finishing surfaces fair and even in Cement mortar 1:6 all as specified and directed.
Supply only Integral liquid water proofing compound conforming to IS-2645-2003 complete all as specified.
Material and labour for preparation of new plastered or unplastered surafces of wall and applying three coats of white wash including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .
Material and labour for preparation of new plastered or unplastered surafces of wall and applying three coats of colour wash including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .
Material and labour for preparation of new surfaces of walls and applying wall care white putty and sand papering surfaces to achieve smooth surfaces and applying two coats of acrylic based distemper over a coat of primer, white or tinted including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .
Material and labour for sand filling in floors or pavings laid in layers not exc 25 cm thick spread, levelled and and rammed including watering complete all as specified.
Material and labour for Hardcore of gauge n exc. 63 mm , stone or boulders, deposited , spread and levelled in layer n exc. 15 cm thick, watered and rammed to a true surface complete all as specified.
Material and labour for Non Skid ceramic coloured tiles (1st quality) 7 to 8mm thick ( square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screeding in CM 1:6 complete all as specified (Note : screed bed shall not be measured and paid separately).
Material and labour for prepolished chemically treated coloured chequered cement concrete tiles of size 300 mm x 300 mm x 25 mm thick set, jointed and pointed in neat slurry in floors and steps with grey cement and pigments laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified ( screed bed shall not be measured and paid separately).
Material and labour for glazed ceramic coloured / digital printed of size ( 300 x 450 mm x 7 mm thick ) as in vertical surfaces such as skirting/dado / riser to steps etc conforming to IS - 13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including cement screed bed / backing layer of 10mm thick in cement mortar (1:4) complete all as specified and as directed. (Note : screed bed shall not be measured and paid separately).
Material and labour for 75mm thick PCC (1:3:6), type C-2 (using 40 mm graded crushed stone aggregate ) as in plinth protection; pathway / hardstanding etc laid in bays / panels not exc. 2.00 Sqm each including construction joints at suitable interval and each corner and filled with bituminous mastic filling (1 part bitumen & 3 part sand) and finished the surface even and smooth without using extra cement complete all as specified.
Supply and fixed rotational moulded poly-ethylene multilayer water storage tanks ( cylinderical vertical with closed top ) 1000 litres capacity ,ISI marked (embosed) hoisted and fixed in position complete all as specified and as directed.
Supply and fixed rotational moulded poly-ethylene multilayer water storage tanks ( cylinderical vertical with closed top ) 500 litres capacity ,ISI marked (embosed) hoisted and fixed in position complete all as specified and as directed including taking down old unserviceable / broken one complete all as directed.
Supply and fixed ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms complete , screwed for 20 mm bore dia. pipe or brass ferrule complete all as specified.
Supplying , laying, jointing and testing 15 mm nominal bore Steel water tubes, 'medium grade' ,galvanised , with all fittings ; fixed to walls and ceilings or laid in floors complete all as specified.
Supplying , laying, jointing and testing 20 mm nominal bore Steel water tubes, 'medium grade' ,galvanised , with all fittings ; fixed to walls and ceilings or laid in floors complete all as specified.
Supply and fixed Chromium plated fancy long body Bib taps with cup or crutch handle, screwed for 15 mm bore dia. iron pipe or for brass ferrule and fixed complete all as specified.
Supply and fixed brass CP angular stop cock one way with flange long fancy type screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified
Supply and fixed CP stop cock ( concealed type) long fancy type screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified
Supply and fixed of low level flushing cistern (dual-flush), 9-10 litres capacity ISI marked embossed moulded from virgin poly propylene valveless, syphonic ac-tion type, low level, white, with inlet, ball valve, float and handle including brackets including flush pipe complete all as specified and directed.
Supply and fixed of vitreous china white Squatting pan ,'Orissa' pattern size 580x440mm with integral footrests water closet) with 'P' or 'S' trap front or back inlet complete including lime concrete for bedding, connection to drain pipe and to flushing pipe , anti syphonage pipe etc complete all as specified.
Supply and fixed of vitreous china wash basin (WHB) , counter top white , flat back , basins etc. with long screw shanks and fly nuts , flange end embedded in red lead cement , including cutting for and pinning in ends of brackets or erecting stand but but incl providing brackets, waste pipe & CP waste coupling complete all as specified and as directed.
Supply and fixed of Vitreous China half stall type urinal , White ( minimum) including providing and fixing plugs, bedding the urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, CP spreader, stainless steel tube fixed with 15 mm dia pipe. pointing around urinal back in cement and providing grating and union for discharge pipe including 32mm bore PVC discharge pipe complete all as specified and as directed.
Supply and fixed pillar taps, fancy type, cast copper alloy , with capstan heads, chromium plated , screwed down for 15 mm bore pipe,high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified.
Supply and fixing CP Brass Tubular towel rail, 20 mm dia. D type, 60 cm long between flanges with bracket complete all as specified.
Supply and fixed of Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats(Minimumweight 300gms complete all as specified.
Supply and fixed of PTMT connections 15 mm size with PVC nuts of length 450 mm complete all as specified.
Supply and fixed in repairs Cast Brass chromium plated shower rose 125 mm size with or without swivel joints, any size, with 15 mm size shower arm including fixing to steel pipe or union in repairs complete all as specified.
Supply and laying 110 mm bore PVC (SWR) pipes single socketed ISI marked IS-13592 , type 'B' in any length with rubber ring joints laid in trenches or in floors complete all as specified.
Supply and fixed for 110mm dia PVC (SWR) bend of any radius for PVC (SWR) pipes, fixed to walls complete all as directed.
Material and labour for concrete bed for sewer line packing under and haunching against the sides of the new pipes with PCC (1:3:6) type C-2 with using 40 mm graded stone aggregates for the 110 mm dia (Internal) of sewer pipe lines complete all as specified and as directed
Supply and fixed of PVC (SWR) floor trap, plain with C P grating including jointing with solvent cement, 75 mm dia. outlet in cement concrete (1:2:4) type Bi (using 20 mm graded stone aggregate) complete all as specified.
Supply and fixed Steel work in tubular trusses , using MS pipe , hollow section (Rectangular or square section) in vertical column and partition, roof truss (framed) etc. including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St. 240 / IS-4923-1968 and painted one shop coat of zinc chrome primer paint including preparation of surfaces before fabrication complete all as specified.
Supply and fixed of Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and as directed.
Supply and fixed Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in as in ridges, valley, eaves, etc with self tapping screws as specified.
Supply and fixing of pressed steel framed for door with one or more rebates including necessary fixing lugs, hinges, lock strike plates, size of frame 125 X 60 mm, 1.6 mm thickness of sheet, including one shop coat of primer complete all as specified and as directed.
Supply and fixed 30 mm thick factory made door Flush shutters , solid core construction, with particle board core and plywood face panels, commercial type on both sides including for the provision of suitable blocks for mortice locks, latches or other fittings etc complete all as specified and directed.
Supply and fixing of 35mm thick factory made 2nd class hard wood gauged and skeleton shutter open rebated and prepared to receive glass , gauge etc (without sash bars) for fly proof door shutter, edges of framing plain, chamfered or rounded, fitted with cut of any mitred beads for securing gauge etc, size of members of shutter as specified in SSR Part-I section 8 clause No.8.23(a) and fitted to chowkats complete all as specified and as directed.
Supply and Fixing solid PVC door frame of size 50 mm X 47 mm made out of 5 mm wood grain printed PVC sheet reinforced with MS square tube supply & fixing in opening as per specification & drawing and as directed.
Supply and Fixing factory made Solid PVC Moulded Door Shutter, 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 4mm thick Moulded prelam PVC Sheet on the front face and 4mm Plain colour PVC sheet on back face, with particle board core fixing in frame at site as per specification & drawing complete all as specied.
Supply and Fixed of 100 mm long medium weight, stainless steel butt hinges complete all as specified and directed.
Supply and fixing 150 mm size aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified.
Supply and fixing 150 mm size Extruded aluminium alloy handles, fabricated type, anodised complete all as specified.
Supply and fixing 250 mm long Aluminium alloy. Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified.
Supply and fixing for factory made steel window with side hung shutters including projecting type hinges with steel handles, and steel peg stay, fixing lugs complete with glazing bar devetailed or welded including one shop coat of red oxide primer compete all as specified and as directed.
Supply and fixing in repair factory made steel window with side hung shutters including projecting type hinges with steel handles, and steel peg stay, fixing lugs complete without glazing bar devetailed or welded including one shop coat of red oxide primer compete all as specified and as directed.
Supply and fixed mild steel framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290-Gde E-165 complete all as specified and directed.
Material and labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamelled paint (1st quality) over pre primed surfaces including cleaning / washing and preparation of surfaces complete all as specified.
Material and labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamelled paint (1st quality) over one coat of red oxide Zinc chrome primer complete all as specified.
Material and labour for preparation of untreated new wooden surface of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint, (1st quality) over a coat of pink primer all as specified and directed.
Supply and fixing 3 mm thick (nominal) Sheet glass, ordinary quality , figured glass, pin head type and glazing with oil putty in squares n exc 0.50 sq.m. in each pane complete all as specified.
Supply and fixed stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.
Material and labour for false ceiling with GI powder coated frame work and 4 mm thick E board classic design , non asbesto fibre reinforced cement board , Reinforced Designer Board tiles conforming to IS-14862 and ISO-8336 , of approved texture at all height duly suspended ceiling laid on hot dip galvanised iron imposed grid of size 600 mm x 600 mm, T section / Angle section including cutting holes in brick wall and making good surface with cement concrete 1:2:4 type B-0 / 1:3 cement mortar complete all as specifiedand having following details: (a) 27mm x 27 mm angle 0.55 mm thickness, GI powder coated hot dip galvanised plugged at the rate 600mm centre to centre alongwith the perimeter of wall. (b) 25 mm x 25 mm Tee 0.55 mm thickness, GI powder coated hot dip galvanised as main and cross runner suspended with 1.6 mm dia GI wire suspendrs (not exc. 1.20 mtr length) with adjustable clamps and dash true fastners plugged in RCC slab or angle iron runner of slopped roof placed at the rate 600 mm centre to centre alongwith the perimeter of wall. Note: The work shall be carried out as per manufacturer instruction and as directed.
M&L Mild steel bars ( TMT) 8mm dia. and over up to and including 10 mm dia. , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. Or securing with clips complete all as specified.
M&L Mild steel bars ( TMT) 8mm dia. bars as in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. Or securing with clips complete all as specified.
Material and labour for reinforced cement concrete type B-1, 1:2:4 nominal mix (using 20 mm graded aggregate) as in lintal beam, plinth beam chajja complete all as specified.
Material and labour for use and waste Formwork to sides of concrete foundation , footings , bases of columns rafts and raft beams , side and soffits (if any) of foundation and plinth beam ; girders,bresumers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams etc.or similar work ; vertical or to batter surfaces rough finished complete all as specified.
Material and labour for reinforced cement concrete , 1:1.5:3 nominal mix (using 20 mm graded aggregate) as in foundation , including rafts , footings , foundation beams ; plinth beams; bases for columns, etc ; basement slabs , under-remead piles and mass concrete complete all as specified.
Material and labour for reinforced cement concrete , 1:1.5:3 nominal mix (using 20 mm graded aggregate) as in columns , pillars , piers , posts and struts etc complete all as specified.
Material and labour for use and waste Formwork to sides of pillars , posts , struts , piers , column etc rough finished surfaces square , rectangular on plan or polygonal , vertical or to batter surfaces rough finished complete all as specified.
Excavating in post holes in soft/ loose soil ( or similar holes) each n exc 0.5 cu.m. getting out, returning,filling in and ramming earth or broken rubble mixed with earth around , in layer not exceeding 25 cm, watering and removing surplus soil to a distance n.exc 50 M complete all as specified.
Material and labour for plain cement concrete 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.
Supply and fix mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets ( for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290-Gde E-165 complete all as specified and directed.
Supply only 3.7 mm dia galvanised steel wire, (Hot dipped galvanised), 75 mm x 75 mm mesh, made up into mattresses or cages, all as specified.
Fixing only chain link fencing to post old and new including line wires, any mesh , size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire all as directed.
Material amd labour for Mild steel bars round bar 10mm dia. and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. Or securing with clips complete all as specified.
Material and labour for Mild screw bolts ( Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut, exc 15 but n exc 22.5cm long and 11 to 15 mm dia. of shank complete all as specified.
Material and labour for preparation of new steel surfaces of any description not otherwise described n.exc 10 cm width or girth and applying two coats of synthetic enamelled paint (1st quality) over one coat of red oxide Zinc chrome primer complete all as specified.
Supply and fixed mild steel in framed work as in doors frame and water staging of angle or other section with gusset plates , rails , braces , etc complete , drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings conforming to Fe 410-W(Gde-E-250) quality-A with gusset plates, rails, braces, etc,. and including fixing of steel hinges or other door fittings complete all as specified and as directed.
Material and labour 18-20 mm thick Granite ( Jet Black) work ( table rubbed and polished) in steps , jambs, pillars, window cills, cooking plateforms and like in cement mortar ( 1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screeding in CM 1:4 including full rounding the exposed surfaces complete all as specified.( Note Screed bed shall not be measured and paid separately).
Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), in floors, aprons etc .laid dry or laid dry and pointed including removing of demolished material from work site at any distance outside MD land complete all as specified and directed.complete all as specified.
Taking up or down steel tubing and connections, including cleaning for re-fixing and removal of unserviceable pipe from work site,15 mm bore dia all as directed.
Taking up or down steel tubing and connections, including cleaning for re-fixing and removal of unserviceable pipe from work site, 20 mm bore dia all as directed.
Supplying , laying, jointing and testing 15 mm nominal bore Steel water tubes, 'medium grade' ,galvanised , with all fittings ; fixed to walls and ceilings or laid in floors complete all as specified.
Supplying , laying, jointing and testing 20 mm nominal bore Steel water tubes, 'medium grade' ,galvanised , with all fittings ; fixed to walls and ceilings or laid in floors complete all as specified.
Taking down cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, any description etc.including removing of rubbished material from work site complete all as specified.
Supply and fix in repairs Sheet glass shelf assembly consisting of 5.50 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long fixed with CP brass screws and plastic cleats complete all as specified.
Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 sqm each etc including removing material from work site complete all as specified and directed.
Material and labour for 80 mm thick coloured rubber moulded machine pressed precast conctete interlocking paver block chemically treated any shape , size and colour confirming to IS 15658-2006 of M-40 Grade with grey cement and pigment over and including 25 mm thick sand cushion spread and laid levelled in layers complete all as specified.
Material and labour for precast cement concrete type B-1 (1:2:4) using 20 mm graded crushed stone aggregate as in apex stones or kerb stone or similar article to with plain fair faces, including chamfers, weatherings, throating etc. and jointing and pointing in cement mortar 1:4 mortar including weathering, slightly rounded or chamfered angles finished the surface even and smooth without using extra cement complete all as specidied.
Suppy and fixed in repairs, aluminium anodized louvered ventilators with glass louvers , without sash bars, of aluminium sections weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings and with suitable locking arrangements tc.complete all as specified.
Supply and fixed 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with necessary clamps complete all as specified
Supply and fixed for 75 mm dia PVC (SWR) bend of any radius for PVC (SWR) pipes, fixed to walls complete all as directed.
Demolition of cement concrete (un-reinforced) as in ground floor and paving n.exc 15 cm thickness ( below or above ground level ) complete all as specified and as directed.
Material and labour for 100 mm thick PCC (1:2:4), type B-2 (using 40 mm graded crushed stone aggregate ) as in flooring / hard standing including finishing the surfcae fair and even complete all as specified.
INTERNAL / EXTERNAL ELECTRIFICATION Material & Labour for surface type point wiring with 1.50 Sqmm (nominal cross sectional area) PVC insulated (FRLS) unsheathed single core multi stranded copper conductor cable of working voltage 1100 volts grade conforming to IS-694 Pt I & II of 2000 drawn through and including PVC conduit/ PVC caping casing of adequate size having a wall thickness not less than 1.5 mm with all accessories & making good the disturbed surface to its original specification), including provision of 1.5 Sqmm (nominal cross sectional area) PVC insulated (FRLS) unsheathed single core multi stranded copper conductor cable as earth continuity conductor, connected to main switch / DBs or common earth dolly for one light / fan point / exhaust point/bell push point controlled by one 5 Amps one way switch complete all as specified and as directed. Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.
All as per item No.95 here-in-before but for one socket out let 5/6 amps point on the independent board
All as per item No.95 above but One socket out let 5/6 amps point on the same board complete all as specified.
Material and labour wiring for 5/6 pin 6/16 Amp switch socket combination on independent boards controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC conduits/ PVC caping casing and fittings, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FR earth wire and connecting to earth dolly and brass screws, washers etc. including cutting chases pinning in for concealed conduit wiring and making good of disturbed surface n exc 15 cm girth complete all as specified.
Supply and fixed switch piano flush type, single pole , 6 Amps, one way complete all as specified.
Supply and fixed socket 2 in 1, 5 Pin, 5/6 amps, any type complete all as specified and as directed.
Supply and fixed switch socket combination 2 in 1, 5 Pin, 5/16 amps, any type complete all as specified and as directed.
Supply and fixed switch socket combination 2 in 1 , 5 pin , 5/6 amps multipurpose, of any type complete all as specified.
Supply and fixed in repairs switch piano flush type, single pole , 15 Amps, one way complete all as specified.
Supply & fixed ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified.
Supply & fixed of stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified .
Supply & fixed lamp holder, PVC/polycarbonate type with back plate straight or anglar suitable for batten fittings complete all as specified.
Supply and fixing of LED light fittings 1 x 18/20 watts 230 Volt white powder coated slim box type batten made of formed CRCA with snap on installer LED lighting fixture with and including 1x18/20 watt T8 single side connection retrofit LED tube with G13 lamp holders, connector block, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable up to cealing rose complete all as specified and directed.
Supply and fixed new generation energy saving and environmental friendly long life LED street light fitting with 35 watts LED made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening including separate driver comportment with IP 66 protection & impart resistance of IKO7 with operating voltage range of 140V to 270 V olts, 120 Lumen per watt complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable up to cealing rose to fitting and GI pipe bracket made our of GI pipe medium grade 32mm dia 1.5 mtr long bend to required shape complete all as specified.
Supply and fixed new generation energy saving and environmental friendly long life LED street light fitting with 25 watts LED made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening including separate driver comportment with IP 66 protection & impart resistance of IKO7 with operating voltage range of 140V to 270 V olts, 120 Lumen per watt complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable up to cealing rose to fitting and GI pipe bracket made our of GI pipe medium grade 32mm dia 1.5 mtr long bend to required shape complete all as specified.
Supply & fix sheet metal enclosure for 8 way Distribution Boards (DB’s), double door , single pole and neutral with 200 amps rated bus bar, including bus bar neutral link, earth bar and din rail, IP-43, IK-09 protection including gasket and door earthing suitable for fixing MCBs/isolators fixed on wall surface and making good the disturbed surfaces of wall and connecting up complete all as specified and as directed.
Supply and fixed in repairs MCB SPN 40-63 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).
Supply and fixed in repairs MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).
Material and labour for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI lead wire 4.00 mm dua by means of bolts, nuts , check nuts and washers of galvanised ironor of steel to earth plate at one end and connected to equipments at another end, GI earth lead wire shall be encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. Note :- (i) Note: Excavation/PCC/Earth work/Charcoal/ Salt shall be deemed to be include in this unit rate. (ii) If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.
Supply & fixed LED retrofit white glass Lamp 1 x 09 Watts, 230V Base-22 with polycarbonate body and aluminium heat sink complete all as directed.
Supply and fixing of ceiling fan 1200 mm sweep, 230 volts AC 50 Hz (min air delivery 210cfm) , metal body with BEE 5 STAR rating comforming to IS-374-1979 including necessary connection with prewired 3 core flexible multistrand copper cable complete all as specified.
Supply and fixed in repairs for Single pole and neautral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 20 Amps, 240 Volts, including necessry connection complete all as specified
Supply and fixing of exhaust fan 250 mm sweep strudy plastic rust proof body, blade with louvers 1250 rpm 50 Hz 230 volts AC including opening of wall and fixing exhaust fan and making good distrubed surfaces complete all as specified.
Supply, installation, testing and commissioning of electric water heater, storage vertical type, BEE 5 star rated, 25 ltr capacity 230 volts AC, 50 Hz comprising of high wattage heating element for instant heating, extra thick SS inner tank of superior 304 grade, rust & shock proof ABS outer body, non-ferrous pressure plate with & including provision of Pressure relief valve and grouting bolts suitably flushed to wall or any other surface including electric connection with 3 core PVC insulated, sheathed, stranded copper conductor cable/flexible chord and hot and cold water connection pipe of best quality as per manufactuer instruction complete all as specified and as directed.
Supply, laying , testing LT underground electric power cable crossed linked XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade, cross-sectional area 16 sqmm 2 core laid in trenches / laid under floor or fixed to walls/on poles / in ducts including all fixing and connecting accessoties such as Aluminium cable lugs, nut, bolts , washers etc complete all as specified Note: (Excavation, earth work, sand cushioning, protection brick and pipe shall be measured and paid separately under appropriate items)
Material and labour for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed .
Material and labour for laying old size bricks, fly ash bricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified.
Supplying and fixing Galvanised mild steel pipe /tubing, light grade complete with all fittings of 50 mm bore dia, laid in trenches / under roads, fixed to poles/ walls with Mild steel clamps , bolts , nuts and washers complete all as specified and directed. Note :- Excavation & Earth work shall be measured and paid separately)
EXTERNAL WATERSUPPLY Supplying , laying, jointing and testing 20 mm nominal bore Steel water tubes, 'medium grade' ,galvanised , with all fittings ; fixed to walls and ceilings or laid in floors complete all as specified.
Supply and fixed of Gunmetal , globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore dia. iron pipe and fixed complete all as specified.
Material and labour for cutting existing G I Pipe / alteration or addition of 20 mm dia bore for insertion of reducer ,/ Tee complete with all accessories complete all as specified and as directed.
N K Construction
R K AGARWAL
BBKundu
SS SHARMA
M/s. RAMPHAL GARG
M/S S.K. CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .