Repairing of Stronge room at Umargam Ta. Umargam Dist:- Valsad (Flooring Work Plaster Work,Water proofing Door-Window Repairing and Misc. Works)

No figures

1 Providing, laying and jointing in true line and level 110 20.00 Rmt. 836.73

diametre U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall

be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size

mm diametre x 149 mm length x 145 mm heigh at every

2000 mm center to center or shall be concealed in walls

as directed including necessary fittings such as bends,

shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost of all

materials.

2 Removing and scraping of old deteriorated plaster of any 885.00 Sqmt 19.57

thickness fromm wall / R.C.C member including stacking

of serviceable material and disposal of unserviceable

from site of work with all lead and lift

3 Providing and laying water proofing treatment with 36.00 Sqmt 1099.89

china mosaic tiles flooring over avg 50 mm C.C. 1:2:4

bedding for maintaining slope for plain and curve surface

& 12 mm to 20 mm of broken piece not more than 2.5CM

of ceramic / glazed tiles ( one for more colour as directed

) to be laid over cement mortar bedding of C M 1:3 (1

cement : 3 sand ) contain water proofing materials per

bag of cement useas specified by manufactured and slops

to be tempered to bring mortar up to surface with using

white cement and colour pigment including rounding of

junctions and extending them up to 15 cm along the wall

and curing with bends any patens or design as per

drawing and cleaning by using oxalic acid etc. complete.

4 Dismentaling tiled of stone floors laid in mortar 173.00 Sqmt 48.21

including stacking of serviceable materilas and disposal

of unserviceable materials with all lead and lift.

5 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 123.00 Sqmt 1403.89

mm (average) base of cement mortar 1:6 ( 1 cement:

coarse sand) on new surface or fixing on existing flooring

by adhesive material including dismentaling of existing

flooring and jointed with color cement slurry including

finised with flush pointing & cleaning the surface etc.

complete for DARK shade

Item Rate In

Description of Item Quantity Unit Amount

No figures

6 Brick work using common burnt clay building bricks 1.20 Cumt 4295.99

crushing strength not less than 35 Kg/Sq.cm. in super

structure above plinth level upto floor two level in

cement mortar 1:6 (1cement : 6 fine sand) (B)

Conventional For Ground Floor

7 Providing and laying cement concrete work 1:2:4 (1- 1.00 Cumt 4038.02

Cement : 2- Coarse sand : 4- graded stone aggregates

mm nominal size) and curing complete excluding cost of

formwork and reinforcement for reinforced concrete

work in (B) Slabs, landing, shelves, Balconis , Lintels,

Beams, Girders and Cantilever upto floor two level.

8 Providing and fixing mirror polished 18 mm thick Green 39.00 Sqm 2004.85

Marble stone with full round edge and polished of

approved quality in clading on sill and around the doors/

windows/ ventilation with 12 mm thick cement mortor

CM (1:4) and fixing with cement slurry & adhesive

including moulding of exposed edges as directed by

engineering in charge etc. complete.

9 Provoding and fixing flush door shutters, solid core 7.00 Sqm 1797.77

construction with frame of first class hardwood with

cross board and face veneer or plywood face panels,

including anodised alluminium butt hinges with

necessary screws. (B) Non-decorative type and block

board core anodised alluminium butt hinges in flush

door shutters (2) 35 mm thick.

10 Dismentling doors, windows, ventilators etc. (wood or 8.00 Sqm 251.34

steel) shutters including chowkhats architraves,

holdfasts and other attachment etc. complete and

stacking them within all lead and lift.(ii) Exceeding

Sq.M. in area.

11 Finishing wall with water proofing cement paint of on 254.00 Sqm 57.90

wall surfaces (Two coats) to give an approved brand and

manufacture and of required shape even shade after

thoroughly brushing the surface to remove all dirt and

remains of loose powered materials.

12 Painting two coats (excluding priming coat) on new steel 28.00 Sqm 87.81

and other metal surface with enamel paint, brushing,

interior to give an even shade including cleaning the

surface an even shade including cleanicn the surface of

all dirt, dust and other foreign matter.

Item Rate In

Description of Item Quantity Unit Amount

No figures

13 Wall painting (two coats) with plastic emulsion paint of 694.00 Sqm 85.76

approved brand and manufacture on wall surfaces to

give an even shade including thoroughly brushing the

surface free from mortar dropings and other foreign

matter and sand papered smooth including applying two

coats of Birla or Asian acrylic lappy (putty) and two coats

of primer of approved brand and manufacture on Old

wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and

other foreign matter and sand papered smooth

14 Wall painting (two coats) with plastic emulsion paint of 194.00 Sqm 126.35

approved brand and manufacture on wall surfaces to

give an even shade including thoroughly brushing the

surface free from mortar dropings and other foreign

matter and sand papered smooth including applying two

coats of Birla or Asian acrylic lappy (putty) and two coats

of primer of approved brand and manufacture on Old

Celling surface to give an even shade including

thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered

15 Providing and laying polished Kota stone slab flooring 18.00 Sqm 965.59

over 20mm (Average) thick base of cement mortar 1:6 (1-

cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 -

coarse sand) laid over and jointed with grey cement

slurry mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete. (A) 25mm

16 Providing and fixing extruded aluminum window having 9.00 Sqm 2140.33

extruded aluminum Colour Powder Coated section frame

main outer size 127mm x 38.10mm x 1.35mm ,@

Wt.1.384 Kg/mt,horizontal Four track member size

1.205Kg/mt,vertical member of size 122.20mm x

31.75mm x 1.50mm ,@ Wt. 1.398 Kg/mt with sliding

shutters of horizontal member size 40mm x 18mm x

1.29mm @ wt.of 0.456Kg/mt,vertical member of size

40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,@ with

mm thick transparent bronze colour tinted float glass

with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per

details etc complete for window.

Item Rate In

Description of Item Quantity Unit Amount

No figures

17 Providing and fixing 1mm thick M.S. sheet sliding 15.00 Sqm 3688.64

shutters with frame and diagonal braces of 40 x 40 x

mm angle iron, 3.15 mm M.S. gusset plates at Junctions

and corners 25 mm dia. pulley, 40 x 40 x 6mm angle and

T-iron guide rail at top and bottom respactively with

handles, stoppers and locking agangement etc, including

applying a priming coat of red lead paint.

18 Providing and fixing eco-friendly light weight calcium 84.60 Sqm 1648.96

silicate false ceiling tiles having Tegular edge & 15 mm

Thick Densified edges on the Tile Periphery for Extra

Strength The Light weight calcium silicate ceiling tiles

shall have , light reflection 85% non-combustible as per

B.S. 476 part IV, 100% humidity resistance and also

having thermal conductivity0.043° w/m KC.for the best

thermal Insulation . The Light weight calcium Silicate tile

shall be of approved texture Fine fissured/

Spintone/Cosmos having NRC value of 0.5 & Globe

having NRC value of 0.75 NRC or equivalent of size 595 X

595 mm to be laid on true horizontal level suspended

inter locking metal grid of hot dipped galvanized steel

sections (galvanizing @120 grams per sqm including

both side) consisting of main ‘T’ runner suitably spaced

at joints to get required length and size of 24X38mm

made from 0.30 mm thick (minimum) sheet, 1200mm

centre to centre, and cross ‘T’ of size 24X28mm made out

of 0.33mm (Minimum) sheet spaced 1200mm along

spaced between main ‘T’ at 600mm centre to centre to

form agrid of 1200X600mm and secondary cross ’T’ of

length 600mm and size 24x28mm made of 0.30 mm thick

(Minimum) sheet to be interlocked at middle of the

1200X600mm panel to form grid of size 600X600mm

resting on periphery walls/partitions on a perimeter

wall angle pre-coated steel of size (24X24X3000mm

made of 0.40mm thick (minimum) sheet with the help of

rawl plugs at 450mm centre to centre with 25mm long

dry wall screws @ 230mm interval and laying 15mm

thick Densified edges light weight calcium silicate ceiling

tiles of approved texture (Fine

Fissured/Cosmos/Spintone) in the grid including, cutting

/making opening for services like diffusers, grills, light

fittings, fixtures, smoke detectors etc., wherever

required, Main ‘T’ runners to be suspended from ceiling

using G.I. slotted cleats of size 25X35X1.6mm fixed to

ceiling with 12.5mm dia and

50mm long dash fasteners, 4mm G.I. adjustable rods with

galvanized steel level clips of size 85X30X0.8mm, spaced

at 1200mm centre to centre long main ‘T’ bottom

exposed with 24mm of all T-sections shall be pre-painted

with polyester baked paint, for all heights, as per

specifications, drawings and as directed by

engineer-in-charge.Note:- Only calcium silicate false

ceiling area will be measured from wall to wall. No

deduction shall be made for exposed frames/opening

(cut outs) having area less than 0.30 sqm. The calcium

silicate ceiling tiles shall have NRC. Value of

/making opening for services like diffusers, grills, light

fittings, fixtures, smoke detectors etc., wherever

required, Main ‘T’ runners to be suspended from ceiling

using G.I. slotted cleats of size 25X35X1.6mm fixed to

Item ceiling with 12.5mm dia and Rate In

Description of Item Quantity Unit Amount

No 50mm long dash fasteners, 4mm G.I. adjustable rods with figures

galvanized steel level clips of size 85X30X0.8mm, spaced

at 1200mm centre to centre long main ‘T’ bottom

exposed with 24mm of all T-sections shall be pre-painted

with polyester baked paint, for all heights, as per

specifications, drawings and as directed by

engineer-in-charge.Note:- Only calcium silicate false

ceiling area will be measured from wall to wall. No

deduction shall be made for exposed frames/opening

(cut outs) having area less than 0.30 sqm. The calcium

silicate ceiling tiles shall have NRC. Value of

(Minimum) for Fine fissured/Spintone/Cosmos and

NRC for Globe, light reflection 85% non-combustible as

per B.S. 476 part IV, 100% humidity resistance and also

having thermal conductivity. 0.043° w/m KC.for the best

thermal Insulation

19 Providing TMT Bar FE 500D reinforcement for R.C.C. 70.00 Kgs 73.01

work including bending, binding and placing in position

complete up to All floor Level

20 Steel work, welded in built up sections framed work 3.00 Quntle 9047.86

including cutting, hoisting, fixing in position and

applying a priming coat of read lead paint & two coat oil

paint. (A)In beams and joists, channels angles Tees, flats,

with connecting plates or angle cleats as in main and

cross beams. Hip and jack rafters, purlins conneted to

common rafters and the like.

Total Rs.

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures and

words) of the estimated rate mentioned above. Amount of my /our

Tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

The Credit Value of Dismentalled Materials of Amount Rs. 4095.00 shall be recovered from the 1st Running Bill of

the Contractor.

The Contractor shall exhibit a board with detailed specification and details of work as directed by the

2 Engineer-In-Charge for which no extra payment shall be made.

3 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

4 Income tax TDS will be deducted at a source while making payments of bills

Item Rate In

Description of Item Quantity Unit Amount

No figures

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where

5 there is a change as per actual mix design the cost of difference of cement consumption have been deducted

from the rate of original item at the rate of input rate mentioned in all the tender.

Deputy Executive Engineer Executive Engineer

Vapi ( R & B ) Sub Division Valsad ( R & B ) Division

Vapi Valsad