Construction of Toilet Block & Community Hall at villege Bhoyan,Vithodar,Ramun,Baiwada,Malgadh2,Bhachalva&Vadaval Ta deesa DistB.K.

Excavation for foundation upto 1.5 m depth including sorting out and stacking of

useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or

( It.Code 04B001A -P.no 71)

Providing and laying cement concrete1:4:8 (1- Cement : 4- coarse sand : 8-hand

broken stone aggregates 40 mmnominal size) and curing completeexcluding cost of

formwork in (A)Foundation and Plinth

( It.Code 05004A - P.no 73 )

Providing and laying controlled cement concrete M.250 and curing complete

excluding the cost of formwork and reinforcement for reinforced concrete work in (C)

3 111.97 Slabs,landing,shelves,Balconies, Lintels, Beams, Girders and Cantilever upto floor two 4471.70 44.72 4516.42 Cmt

( It.Code 05025CA - P.no 77 )

Steel work, riveted in built up sections framed work including cutting, hoisting, fixing

in position and applying a priming coat of read lead paint. (A) In beams and joists,

channels angles Tees, flats, with connecting plates or angle cleats as in main and cross

beams. Hip and jack rafters, purlins conneted to common rafters and the like. (upto

( It.Code 11002AA- P.no . 115 )

Brick work using common burnt clay building bricks having crushing strength not less

than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -

fine sand)(B) Conventional

( It.Code 06001BA -P.no . 86 )

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single

or half brick walls for interior plastering upto floor two level and finished even and

smooth in (i) Cement mortar 1:3 (1-cement:3-sand)

( It.Code 17002A -P.no . 136 )

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending,

7 14554.80 binding and placing in position complete upto floor two level 76.52 0.77 77.29 Kg.

( It.Code 05014C -P.no . 75 )

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick

base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 -

coarse sand) laid over and jointed with grey cement slurry mixed with pigment to

match the shade of slab including rubbing and polishing etc. complete. (A) 25mm

( It.Code 14012AA -P.no . 128 )

Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including throughly

9 1118.16 brushing the surface free from mortar droppings and other foreign matter and sand 82.36 0.82 83.18 Smt

papered smooth.

( It.Code 18031 -P.no . 142 )

Painting two coats (excluding priming coat) on new steel and other metal surface with

10 47.52 synthetic enamel paint, brushing to give an even shade including cleaning the surface 67.89 0.68 68.57 Smt

of all dirt, dust and other foreign matter. ( It.Code 19005 -P.no . 143 )

Filling in foundation and plinth with murrum or selected soil in layers of 20cm.

thickness including watering, ramming and consolidating etc. complete.

Providing and laying white glazed tiles 6mm thick in skrting risers of steps and dedo

12 313.20 on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white 1020.37 10.20 1030.57 Smt

cement slurry ( It.Code 14009AA -P.no . 128 )

Providing and fixing 30mm thick factory made wire guazed solid PVC Door shutter consisting of

frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19mm for stiles and

15mm x 15mm for top, lock and bottm rails, M.S. frame shall have a coat of steel primers of

approved make and manufacture, 19mm x 19mm M.S. square tubes shall be coveed with 5mm

thick head mouled PVC ‘C’ channel of size 30mm thickness, 90mm width out of which 75mm

shall be flat and 15 mm shall be bent in 90 degree angle on either side forming stiles and 5mm

thick 115mm wide PVC sheet out of which 100mm shal be flat and 15mm shal be betn in

degree on the inner side to from top and bottom rails and 130mm wide PVC sheet out of which

100mm shal be flat and 15mm shal be bent in 90 degree on both side to from lock rail 10mm

13 22.68 (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail and bottom rail, panel will 1968.00 19.68 1987.68 Smt

be of G.I. wire gauge of 24 gauge to be fitted in by ‘C’ channel of size 10mm x 35mm on the

either side in the stiles.The inner side ‘C’ channel is fixed by 19mm x 19mm M.S. tube on both

side with screws. The wire mesh in top, bottom and lock rail is sealed with 15mm x 15mm tube

with G.I.wire, 1mm (5mmm x 2) thick PVC strip of 25mm width is to be stuck and screw on both

side of G.I. wire guage interior at the top, bottom and lock rails. An additional 5mm thck PVC

strip of 20mm width is to be stuck on the interior side of the ‘C’ channel using PVC solvent

cement adhesive etc. complete as per dirction of Engineer in charge, manufacture’s specification

( It.Code 10047 -P.no . 108 )

Constg.Of Toilet Block& Community Hall

Village- , Ta-Deesa Dist-B.K

Qty Descripation Rate Total Rate Per Amount

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre C/C or shall be concealed

14 180.00 as directed including necessary fittings etc. including testing of pipe and joints and 90.93 0.91 91.84 Smt

the same with adhesive solvent, including cost of all materials.

( It.Code 23062 -P.no .168 )

Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm

(Earthwork, bed concrete, foot reste and trap to be measured and paid for separately)

15 12.00 (A) Vitreous China.(I) Long pattern = White colour 983.33 9.83 993.16 Smt

( It.Code 23009 -P.no . 163 )

Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S.

brackets painted white including sutting holes and making good the same but

fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In

white colour. ( It.Code 23018 -P.no . 164 )

Providing and fixing Urinal or approved quality including conecting the Urinal with

36.00 waste pipe , tap etc. complete.(A) White earthenware flat back or corner type size

260mm x 350mm. (It.Code 23033 -P.no . 166 )

Providing And Supplying in standard length isi mark rigid unplasticised pvc pipes

suitable for potable water with ringfit joint including cost of rings, as per is

540.00 specification No 4985/1988 including all local and central taxes, transportation ,freight

charges, octroi,inspection charges , loading , conveyance to the depatmental stores and

including cost of jointing material etc.Complete .P.V.C. Pipes 6 kgf / Sq.cm. 90 mm

Technically sanctioned for Rs.

T.S.Register Page No............Sr. No..........

for year 2026-27

Deputy Executive Engineer