CWE/FZR- /2022-23 Provn of security wall from trg area post to MT of Inf Bn (TA) Sikh at CG Complex under GE Ludhiana

Amount

Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep, not exc. 10 Sqm on plan and getting out complete all as specified.

M&L Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling as mass concrete, complete all as specified.

M&L for use & waste wooden Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter rough finished flat surfaces of concrete, complete all as specified

M&L for use & waste wooden Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc rough finished flat surfaces of concrete, complete all as specified

M&L for use & waste Square, rectangular or polygonal wooden Formwork to sides of pillars, posts, struts, piers, columns and stanchions, rough finished surfaces of concrete, complete all as specified

S&F Mild steel TMT bars 10 mm dia cut to length, bent to shape required including cranking, bending spirally for columns, hooking ends, as in stirrups, spacers, binders and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete, FE-500/550 confirming to IS-1786-1985 all as specified & directed.

S&F Mild steel TMT bars 5 mm dia over upto and including 10 mm dia in stirrups, cut to length, bent to shape required including cranking, bending spirally for columns, hooking ends, as in stirrups, spacers, binders and binding with and including mild steel wire not less than 0.9 mm dia complete, FE-500/550 confirming to IS-1786-1985 all as specified & directed.

M&L Reinforcement cement concrete M-25 design mix concrete using 20mm graded aggregate as in foundations, including rafts, footings, foundation beams, Plinth beam, bases of columns etc, complete all as specified.

M&L Reinforcement cement concrete (Design mixed M-25) using 20mm graded stone aggregate as in Columns, pillers, piers, post & struts, complete all as specified.

M&L Reinforced cement concrete (Design mixed M-25) using 20mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5 metre span, complete all as specified.

M&L brick work with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and directed.

Returning, filling in, earth including spreading, leveling watering and well ramming in layer each not exceeding 25cm thick, complete all as specified.

Removal of surplus soil to a distance not exc 50 metre and depositing where directed at a level not exc 1.5 metre above the starting point complete all as specified.

S&F mild steel angle swan neck bracket for fixing barbed wire on top of security wall including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc.) cutting and spliting another end to embeded in concrete column including all necessary welding and cutting of angle to required size, drilling, bolting or riveting, etc, and similar work complete all as specified.

M&L for 15mm thick rendering in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

M&L for Preparation of new plastered wall surfaces and applying two coats of cement base paint over a coat of primer, complete all as specified.

M&L for Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over priming with a coat of red oxide, complete all as specified.

B.L. Chaudhri and Co.

ANUJ ABROL CONTRACTOR

H G CONSTRUCTION COMPANY