SPL REPAIRS TO INTERNAL ROAD 500M AND FROM MAINT GATE TO MT GATE AND OFFICE COMPLEX AREA AT NAA UNDER GE (N) TEZPUR

Amount

Note 1: (Applicable for all parts/items) : The bidders/contractors are advised to read tender document, all drawings & all corrigendum/amendments and general condition of contracts before entry/quoting the rates. Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading of incorrect/ pre-revised BOQ shall be treated as non bonafide and rejected. Fixed credit has been given in technical documents which shall be taken into account during acceptance of bid/tender.

M & L for preparation of old black bituminous top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and apply a tack coat with paving bitumen of VG-10 or VG-30 @ 5 kg per 10 square meter complete in all respect as specified and directed.

M & L for premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) using paving bitumen of VG-10 or VG-30 at the rate of 4% by weight of total mix complete in all respect as specified and directed.

M & L for repair to pot holes of any depth not exceeding 1.00 Sqm each including sweeping free from dust and mud of water scoring sunken surface in road etc, cutting around edges to at least 25mm in depth making good by applying tack coat @ 5Kg per 10 sqm and filled with bituminous premixed carpet mix, 25mm consolidated thickness, with 0.33 cu.m. of stone chippings mixed with 18.25 kg of binder (paving bitumen of VG-10 or VG-30) per 10 square meter, rolled and consolidated to required gradient and camber with power road roller exceeding 8 tonne and not exceeding 12 tonne complete in all respect as specified and directed.

Providing and laying semi dense bituminous concrete 40mm consolidated thickness with 5.5% binder content by weight of total mix, using paving bitumen of VG-10 or VG-30, rolled and consolidated to required gradient and camber with power road roller exceeding 8 tonne and not exceeding 12 tonne complete in all respect as specified and directed.

M & L for repair to pot holes of any depth not exceeding 1.00 Sqm each including sweeping free from dust and mud of water scoring sunken surface in road etc, cutting around edges to at least 25mm in depth making good by applying tack coat @ 5Kg per 10 sqm and filled with bituminous premixed carpet mix, 25mm consolidated thickness, with 0.33 cu.m. of stone chippings mixed with 18.25 kg of binder (paving bitumen of VG-10 or VG-30) per 10 square meter, rolled and consolidated to required gradient and camber with power road roller exceeding 8 tonne and not exceeding 12 tonne complete in all respect as specified and directed.

S & F in repair solar road stud having 3 LEDs of colours red/ yellow to a side (total 6 Nos) housed in a tough pressure die casted aluminum alloy of any size (120 x 130 mm), (100x130mm) and (125x125mm) of height 20 mm with built in stem-nail 30 mmx 50 mm long for fixing with epoxy. LEDs, solar - cells, battery & light sensor well protected in side under tough unbreakable polycarbonate transparent sheet roof. System workable for 2-3 days (nights) after full charge in 8-10 hours. Make: GREENS/GREENLITE , 3M, Ladwa, Adstar, Fasteck Metro plus, Dark Eye

S & F in repair dual directional reflective cat eye of impact resistanct ABS plastic stud 120X120mm having ultra violet resistant colour white having 4x2=8 large glass lens reflectors (Tiger-eye) of colour white a side fixed with epoxy and steel zinc plated nail of dia 12mm of length 120mm for fixing to road by hammering. Make: GREENS/GREENLITE , 3M, Ladwa, Adstar, Fasteck Metro plus , Dark Eye

S & F Road safety convex mirror of size 600mm dia having polycarbonate body, unbreakable orange colour including mountinted over metallic stand not less than 65mm dia pipe duly painted of standarad height 150cm. All steel parts black powder coated to make all weather resistant. The same is embeded in ground with 300X300X300m size PCC of 1:2:4) including necessary excavation, the cost is included in the item. Make Honesty Automation Private Limited, GREENS/GREENLITE , 3M, Ladwa, Adstar, Fasteck Metro plus, Dark Eye or equivalent.

M & L 100mm thick PCC (1:2:4) type B-2 (using 40mm nominal size crushed and graded stone aggregate) laid in floor, path, hard standing etc. or of similar nature of work including necessary dividing strips/form work, finished the surface fair and even including demolition of existing PCC complete in all respect as specified and directed.

M & L 75 mm thick PCC (1:3:6) type C-2 (using 40 mm nominal size crushed and graded stone aggregate)etc. or of similar nature of work including necessary dividing strips/form work, finished the surface fair and even complete including demolition of existing PCC in all respect as specified and directed.

M&L for sand filling under floor or below paver blocks incl. watering and consolidation complete in all respect as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment complete in all respect as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade with grey cement and pigment complete in all respect as specified and directed.

M & L for Broken stone or boulders hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete in all respect as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete in all respect as specified and directed

Material and Labour for 2mm thick Thermoplastic road marking material/Hot making paint (minimum qty of material @ 2.02 gm per Cucm) of specified shade/colour using hot process by fully automatic thermplastic materials applicator machine filled with profile shoe, glass beads (minimum qty of mglass beads @ 30% of main material's by weight) to be embedding and anchoring at a depth of 50-60% and should be pressure type system, having tank heater and profile shoe heater, driven by experienced operator on road surface including cost of all materials, labour, T&P, transportation, cleaning the road surface of all dirts, seals, oil grease, grass and foreign materials etc., complete in all respect as specified and directed. Road marking material should comply with BS 3262:Part 1:1989,AASHTO M-249, MORTH ( Ministry of Road Transport and Highways, India ) Clause 803.4.2 1, JIS K 5655 of Make: IRA road marks, Asian paints (Apcomark), Automark Technologies (India) Pvt. Ltd., Metalite (Hibrite), STP

Material and Labour for 2.5mm thick Thermoplastic road marking material/Hot making paint (minimum qty of material @ 2.02 gm per Cucm) of specified shade/colour using hot process by fully automatic thermplastic materials applicator machine filled with profile shoe, glass beads (minimum qty of mglass beads @ 30% of main material's by weight) to be embedding and anchoring at a depth of 50-60% and should be pressure type system, having tank heater and profile shoe heater, driven by experienced operator on road surface including cost of all materials, labour, T&P, transportation, cleaning the road surface of all dirts, seals, oil grease, grass and foreign materials etc., complete in all respect as specified and directed. Road marking material should comply with BS 3262:Part 1:1989,AASHTO M-249,MORTH ( Ministry of Road Transport and Highways, India ) Clause 803.4.2 1, JIS K 5655 of Make: IRA road marks, Asian paints (Apcomark), Automark Technologies (India) Pvt. Ltd., Metalite (Hibrite)

M/S K.K.TRADERS

LUIT CONSTRUCTION

M/S SHYAMAL SARMAH

DRISTEE ASSOCIATES