GENERAL-RM/2024-2025 -RC2 Phase 2/ One year RC -Zone XI for various PWD Roads under Section Muttom in Idukki- District2 Road stretches for a length of 7.750 KM-

Amount

Reactive maintenance(Initial Rectifications works)

5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

OD195516/2024-2025:Providing laying and rolling of close graded premix surfacing material of 20mm thickness composed of 11.2mm to .9mm(Type A) or 13.2 mm to .9mm (Type B) aggregate using penetration grade bitumen to required line ,grade and level to serve as wearing course on previously prepared base.including mixing in asuitable plant laying and rolling with afree wheel 8-10 kN static roller and finishing to required level and grades as per Technical specification

55.2:Supplying and stacking 12mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a)

55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement.

55.6.a:Providing pre mix bitumen leveling coarse having thickness between 20mm and 40mm with 12mm deptl metal by spreading the metal to line and levels and rolling until the compacted coarse aggregate has a firm surface and applying hot bitumen (vg 30) with pressure sprayer at the rate of 48 Kg per M3 metal including all cost of bitumen conveyance heating mixing spreading in appropriate locations to proper levels compacting with power roler and other sundry stores.

55.7.a:Providing bitumen leveling coarse between 40mm and 150mm with 36mm deptl metal by spreading the metal to line and levels and rolling until the compacted coarse aggregate has a firm surface and applying hot bitumen with pressure sprayer at the rate of 20 Kg per M3 metal including all cost of bitumen conveyance heating mixing spreading in appropriate locations to proper levels compacting with power roler and other sundry stores.

12.8.1.C.1:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications RCC Grade M20 - Using Concrete Mixer

12.40:Supply, Fitting and Placing un- coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications

8.13:Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads on Bituminous Surface @ 250 gms per sqm area, the thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform, and free from streaks and holes.

OD53145/2024-2025:Vinyl stickering on existing RC board.

Premonsoon works

OD46028/2024-2025:Engaging mazdoor

OD46029/2024-2025:Engaging small Tipper for various works in roads asper the direction of engineers in charge

OD46030/2024-2025:Engaging Excavator (JCB) for various purposes

55.15:Refurbishment of existing signboardsRefurbishment of existing signboards of all size except gantry mounted ones to their original reflectivity & position by removing obstructions like overgrowth vegitation etc ,if any,washing the signboards with water & soap solution to remove all dirt, oil etc. , correcting any dislocations including minor repairs, replacement of lost nut and bolts etc complete.

OD46031/2024-2025:Supplying instant road repair mix to roads section Muttom in packets which contains 50kg of compounds

Proactive/Preventive maintenance

OD46033/2024-2025:Supplying instant road repair mix to roads section Muttom in packets which contains 50kg of compounds

OD46034/2024-2025:Engaging mazdoor for clearing drain to prevent water logging

OD46035/2024-2025:Engaging Excavator (JCB) for various purposes for clearing water logging

OD53146/2024-2025:Supplying granular material at site

55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement.

4.1.B.1:Construction of granular sub-base by providing graded material, spreading in uniform layers with a motor grader on a prepared surface, mixing by mix in-place method with rotavator at OMC, and compacting with a vibratory roller to achieve the desired density, complete as per clause 401. Grading-V - For sub-base cum drainage layer - Mix in Place Method

OD46036/2024-2025:Conducting and Reporting Inspection Inspection for the entire length of the Project Road frequency of 7 days throughout thr agreement project for the Running Contract as directed by the departmental officers at site

55.22:Supplying and laying interlocking tile 100 mm or nearest size thickness, minimum strength M 40 including providing a layer of 6 mm aggregate for 5 cm thickness, then laying interlock cobbles in lines and levels as per the directions of the departmental officers at site inclusive of all cost & conveyance charges etc.; complete.

12.8.A:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications<br> PCC Grade M15 ( Without formwork) <br>

55.2:Supplying and stacking 12mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a)

55.6.a:Providing pre mix bitumen leveling coarse having thickness between 20mm and 40mm with 12mm deptl metal by spreading the metal to line and levels and rolling until the compacted coarse aggregate has a firm surface and applying hot bitumen (vg 30) with pressure sprayer at the rate of 48 Kg per M3 metal including all cost of bitumen conveyance heating mixing spreading in appropriate locations to proper levels compacting with power roler and other sundry stores.

55.7.a:Providing bitumen leveling coarse between 40mm and 150mm with 36mm deptl metal by spreading the metal to line and levels and rolling until the compacted coarse aggregate has a firm surface and applying hot bitumen with pressure sprayer at the rate of 20 Kg per M3 metal including all cost of bitumen conveyance heating mixing spreading in appropriate locations to proper levels compacting with power roler and other sundry stores.

5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

5.10.1.a:Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade, and cross fall using crushed stone chipping of 6.7 mm size and bitumen (VG-30) @ 9.8 kg per 10 sqm

OD94118/2024-2025:Providing laying and rolling of close graded premix surfacing material of 20mm thickness composed of 11.2mm to .9mm(Type A) or 13.2 mm to .9mm (Type B) aggregate using penetration grade bitumen to required line ,grade and level to serve as wearing course on previously prepared base.including mixing in asuitable plant laying and rolling with afree wheel 8-10 kN static roller and finishing to required level and grades as per Technical specification

Emergency works

OD46026/2024-2025:Engaging mazdoor for various purposes

OD46027/2024-2025:Engaging Excavator (JCB) for various purposes

OD77798/2024-2025: Hire charges of wood cutting equipments ,pullies etc.

OD77799/2024-2025:Engaging wood cutter for cutting branches of trees of any girth

BABU JOSEPH (BID ID -2041598)

Bidder Name

BABU JOSEPH

SHIJU THOMAS