Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.8 LAccepted-AOC 51 212D 3E K V NAGAR NEAR ADARSH NAGAR KHERIA MOD AGRA UP 282001 | AGRA | UTTAR PRADESH | 282001 | L1 | Accepted-AOC ACEEPTED BEING LOWEST TENDER | |
| 2 | L2₹12.3 L+₹23,502 (1.94%)Rejected-Finance 137 3 STREET NO 4 RAJINDER NAGAR DEHRADUN UK 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L2 | Rejected-Finance SECOND LOWEST BIDDER | |
| 3 | L3₹12.9 L+₹83,295 (6.89%)Rejected-Finance H NO 02 BALLUPUR ROAD DEHRADUN UK PIN 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L3 | Rejected-Finance THIRD LOWEST BIDDER | |
| 4 | L4₹13.0 L+₹87,011 (7.20%)Rejected-Finance | L4 | Rejected-Finance FOURTH LOWEST BIDDER | |
| 5 | L5₹13.9 L+₹1.8 L (15.1%)Rejected-Finance | L5 | Rejected-Finance FIFTH LOWEST BIDDER |
| Sl No | Description | Qty | Unit | M/S Anil kumar L2 | M/S P K ARORA L5 | M/S VIJAY TRADERS L3 | KISHORE ENTERPRISES L6 | SETHI BROTHERS L1 | M/s Gupta Associates L4 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Demolition of stone/brick masonry built in cement mortar incl all quions,Arches, pillers etc complete all as specified and directed. | 5 | Cum | 150 ₹750 | 150 ₹750 | 100 ₹500 Lowest | 500 ₹2,500 | 100 ₹500 Lowest | 200 ₹1,000 |
| 2.00 | M&L for brick work with using sub class 'B' brick ,straight or curved on plan exc. 6 meter radius, built in CM (1:6) for wall complete all as spfd and directed. | 5 | Cum | 4,400 ₹22,000 Lowest | 5,200 ₹26,000 | 4,800 ₹24,000 | 5,500 ₹27,500 | 6,000 ₹30,000 | 4,800 ₹24,000 |
| 3.00 | Taking down cement plaster of any description on brick or stone walls or from concrete surface incl racking out joints hacking for key scrubbing with water etc all as specified. | 80 | Sqm | 15 ₹1,200 | 25 ₹2,000 | 10 ₹800 Lowest | 50 ₹4,000 | 35 ₹2,800 | 25 ₹2,000 |
| 4.00 | M&L for rendering 15mm thick with CM 1:4 on fair face and other than fair faces of brick work, finishing fair and even without using extra cement complete all as spfd & directed. | 150 | Sqm | 220 ₹33,000 | 220 ₹33,000 | 230 ₹34,500 | 250 ₹37,500 | 200 ₹30,000 | 130 ₹19,500 Lowest |
| 5.00 | M&L for applying two coat of oil emulsion distemper on wall old /newly decorative plastered/ unplastered wall/ceiling with 1 mm wall care putty over a coat of primer, upto any height ,after preparation. incl complete removal of existing treatment complete all as specified and directed | 300 | Sqm | 50 ₹15,000 | 65 ₹19,500 | 45 ₹13,500 Lowest | 60 ₹18,000 | 60 ₹18,000 | 55 ₹16,500 |
| 6.00 | M&L for preparation of old/ newly plastered surfaces of wall and applying two coats of weather proof exterior paint or apex (any colour) silicon based over a coat of water based suitable primering as a base course as per manufacturer's instructions including necessary scaffolding complete all as specified and directed by Engr- in Charge. | 2,500 | Sqm | 50 ₹1,25,000 Lowest | 85 ₹2,12,500 | 70 ₹1,75,000 | 100 ₹2,50,000 | 65 ₹1,62,500 | 95 ₹2,37,500 |
| 7.00 | M & L for applying one coat of synthetic enamel paint on old painted wooden surfaces of any description complete all as specified including preparation and complete removal of existing treatment complete all as specified and directed . | 130 | Sqm | 40 ₹5,200 | 30 ₹3,900 | 25 ₹3,250 | 40 ₹5,200 | 20 ₹2,600 Lowest | 40 ₹5,200 |
| 8.00 | M & L for applying one coat of synthetic enamel paint on old painted steel surfaces of any description complete all as specified including preparation and complete removal of existing treatment complete all as specified and directed | 130 | Sqm | 35 ₹4,550 | 25 ₹3,250 | 25 ₹3,250 | 40 ₹5,200 | 20 ₹2,600 Lowest | 40 ₹5,200 |
| 9.00 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges , etc complete all as specified and directed | 55 | Sqm | 10 ₹550 Lowest | 20 ₹1,100 | 30 ₹1,650 | 30 ₹1,650 | 35 ₹1,925 | 20 ₹1,100 |
| 10.00 | S&F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified | 50 | Sqm | 780 ₹39,000 | 780 ₹39,000 | 700 ₹35,000 Lowest | 800 ₹40,000 | 750 ₹37,500 | 800 ₹40,000 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
5 Mar 2026, 6:00 pmClosed
GE I RND DEHRADUN
GE I RND DEHRADUN DEAL RESIDENTIAL COMPLEX RAIPUR ROAD DEHRADUN 248008
REPAIR/MAINT OF CGI/PPGI SHEET, PERIODICAL SERVICES, JOINERY, VARIOUS PLUMBING WORK, DOOR/WINDOW AND OTHER MISC B/R WORKS AT CQA(I) RESIDENTIAL AND TECHNICAL AREA RAIPUR DEHRADUN
2026_MES_752402_1
GE(I)RND/9532/E8/25-26
Open Tender
Civil Works
Item Rate
180 days
Dehradun
Class E Category a (i) FOR UNENLISTED CONTRACTOR (i) Enlistment criteria may be seen in Para 1.4 and 1.5 of section of Part I of MES Manual on contracts-2020 as available in all MES formations (ii) Copy of police verification /passport.
6 documents required · 6 mandatory
₹500
Yes
GE I RND DEHRADUN
₹40,000
Yes
30 Mar 2026
12 Feb 2026
7 Mar 2026
12 Feb 2026
5 Mar 2026
26 Feb 2026
12 Feb 2026 - 26 Feb 2026
Demolition of stone/brick masonry built in cement mortar incl all quions,Arches, pillers etc complete all as specified and directed.
M&L for brick work with using sub class 'B' brick ,straight or curved on plan exc. 6 meter radius, built in CM (1:6) for wall complete all as spfd and directed.
Taking down cement plaster of any description on brick or stone walls or from concrete surface incl racking out joints hacking for key scrubbing with water etc all as specified.
M&L for rendering 15mm thick with CM 1:4 on fair face and other than fair faces of brick work, finishing fair and even without using extra cement complete all as spfd & directed.
M&L for applying two coat of oil emulsion distemper on wall old /newly decorative plastered/ unplastered wall/ceiling with 1 mm wall care putty over a coat of primer, upto any height ,after preparation. incl complete removal of existing treatment complete all as specified and directed
M&L for preparation of old/ newly plastered surfaces of wall and applying two coats of weather proof exterior paint or apex (any colour) silicon based over a coat of water based suitable primering as a base course as per manufacturer's instructions including necessary scaffolding complete all as specified and directed by Engr- in Charge.
M & L for applying one coat of synthetic enamel paint on old painted wooden surfaces of any description complete all as specified including preparation and complete removal of existing treatment complete all as specified and directed .
M & L for applying one coat of synthetic enamel paint on old painted steel surfaces of any description complete all as specified including preparation and complete removal of existing treatment complete all as specified and directed
Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges , etc complete all as specified and directed
S&F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S&F pre- painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
Demolition Cement concrete (unreinforced) in ground floors and pavings n exe 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L providing cement concrete (1:3:6) type C-1 using 20 mm graded aggregate, plinth protection / sub base , lintels upto 1.5 mtr long,cills,steps, and other similar band, plinth course, string course, lacing course, parapets and railing upto 60cm in height, coping, apex stones, bed plate, water troughs and like including weathring, slightly rounded or chamfered angles and troughting etc complete all as specified and directed.
M&L prepolished, machine pressed chequred cement concrete coloured tiles 30cm x 30cm x 25 mm thick, set , jointed and pointed in neat cement slurry with mixer of white cement and pigmenet as in floors/pavements/ paths laid over screed bed or bedding layer in cement mortar 1:6, 20 mm thick screed bed complete all as specified and directed.
Dismantling floor, heart wall tiling including cement and sand mortar bedding ( but not backing ) including rubbish off the premises complete all as specified and directed
M&L for non- skid coloured creamic tiles (1st quality/ premium quality) 7 to 8 mm thick, ( square/ rectangular) area of each tiles exc 0.06 sqm but n exc 0.11 sqm, as in floor set and jointed in neat cement slurry and pointed in coloured or white cement to match the colour of tiles as in floor over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L for glazed coloured ceramic tile ,first quality( of approved class , colour and design/ dark shade ) of size 300 x 450x7 / 350x450x7 / 350x250x7 thick in vertical surfaces, as in dado / skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over with and including 10 mm thick rendering in cement mortar (1:4), rough finish to receive the tiles complete all as specified and directed.
M&L glazed vitrified coloured tiles 10 mm thick dark shade (square/rectangular) area of each tiles exceeding .18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick cement screed bed in cement mortar 1:6 for laying floor finishes. complete all as specified and directed.
M&L glazed vitrified coloured tiles 10 mm thick dark shade (square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match,over and including 10 mm thick rendering in cement mortar (1:4), rough finish to receive the tiles complete all as specified & directed
Taking down of any chowkats or frame (Wooden, steel, aluminium, press steel, pvc etc.) with shutter (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and directed.
Taking down of any chowkats or frame ( wooden, steel, aluminium. Press steel, pvc etc.) with shutter (without taking off shutters from the frame) exc 1.5 Sqm but n.exe 4.00 Sqm each complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm but n. exc 2 Sqm each complete all as specified and directed.
M&L factory made 30 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc divided into squares with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, provided with stiles and rails as specified in SSR Part-I Section-8 clause 8.20 (a) fixed to chowkats complete all as specified and directed
S& F factory made 35 mm thick 2nd class HW plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and directed
M&L factory made 30 mm thick flush shutter, solid core contruction, with block board core and plywood face panels commercial type on both side fitted to chowkats complete all as specified and directed
S&F PVC door frame of size 50mmx47mm made out of 5mm prelam PVC sheet and edges will be painted to match with prelam sheet etc.complete all as specified and directed.
S&F factory made solid PVC moulded door shutter with core 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on front face and 2mm prelam PVC sheet on back face and fixing to frame complete all as specified and directed by enginer in charge,
S&F framed work such as guard bars, grills etc and similar work confirming to Fe-410-0 or Fe-310-0 complete all as specified and directed.
S & F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed
M & L for praparation of newly steel surface over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of redoxide primer complete all as specified and directed
M&L for applying two coats of synthetic enamel paint over a coat of pink primer on wooden surface over 10 cm width or girth complete all as specified and directed
Re-securing or easing and adjusting without taking down shutters of any description exc. 1.0 sqm but n exc 2.0 sqm each complete all spcified and directed.
S&F in repair for 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and directed
S&F in repair for 3 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as spfd and directed.
M&L for PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) for embedding of hold fast etc including disturb surfase of existing position complete all as specified and directed
S&F hasp and staple 125mm size, safety type, aluminium adodised with mild steel hinge pin including bolt to hinge plate and fixed with screws but of aluminium anodised (Size of hasp and staple in 125mm) complete all as specified and directed.
S & F continuous (piano) hinges, mild steel, bright finish or electrogalvanised. (30mm Width of flaps when open) complete all as specified and directed.
S&F SS butt hinges, medium weight, cold rolled mild steel, and fixed (Size of hinges in 125 mm) complete all as specified and directed.
S&F 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 150mm long aluminium handles, cast type, anodized and fixed complete all as specified and directed.
S & F alunimium sliding door bolt 300 mm long stove enamealled black with bright bolt not less than 16 mm dia with and including and minimum of 6 boalts and nuts four on bolt plat and two on staple plate and fixed etc.complete all as spfd and directed.
S&F 300 mm long , mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as spfd & directed.
S&F in repair for s.s curtain rails minimum dia 25 mm, cromium plated including brackets, stops, rollers including fixing arrangement with drilling holes in wall brakets with screw etc completed all as specified and directed.
S&F for , grill, tec joist channel, MS pipe, angel,flat, or tee section, round or square bar as in post and strut, frame/chowkhat , in fencing including drilling holes notching for wire,welding etc, flat iron fillet (for securing wire mesh/chanelling fencing) incl all necessary drilling riveting ,bolts etc. similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.
S&F for 0.63 mm thick mild steel, plain, black sheet as in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.
M&L welding in repairs exc. 2.5 cm but n exc 5.0 cm in length and not exc 6.0 mm thick complete all specified and directed.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.16 MB
Genpage9532.pdf
Tender Documents • 0.74 MB
BOQ_842727.xls
BOQ • 1.11 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .