DMF

Brick Masonry in superstructure with CM (1:8) prop: using 2nd class traditional Bricks of size 23x11x7 cms having minimum crushing strength of 50 kg/cm2 including Cost and Conveyance of all materials, scaffolding charges, etc complete for finished item of work. -For superstructure

VRCC M- 30 grade design mix 20mm size HBG (SS-5) metal from approved quarry using minium 370 kg of cemnet of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication & seigniorage charges Columns above Lintel Level

VRCC M- 30 grade design mix 20mm size HBG (SS-5) metal from approved quarry using minium 370 kg of cemnet of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication & seigniorage charges Total Qty of Columns in GF Lintel

VRCC M- 30 grade design mix 20mm size HBG (SS-5) metal from approved quarry using minium 370 kg of cemnet of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication & seigniorage charges Roof Beam

VRCC M- 30 grade design mix 20mm size HBG (SS-5) metal from approved quarry using minium 370 kg of cemnet of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication & seigniorage charges Slab 125 mm thick

VRCC M- 30 grade design mix 20mm size HBG (SS-5) metal from approved quarry using minium 350 kg of cemnet of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication & seigniorage charges for 60cm wide sun-shades of 75mm thick at fixed end and 50mm thick at free end with an average thickness of 62.5mm, and Lofts. (As per BLD-CSTN) Sunshades of 0.60 mt wide

Flooring with vitrified tiles of Ist quality set over bse coat of CM(1:8) 12mm thick over CC bed already laid or RCC roof slab including neat cement slurry of honey like consistency spread at 3.30Kg per sqm & Jointed neatly with white cement paste to full depth mixed with mixed with full depth of pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete for finished item of work.

Providing skirting to internal walls to 15 cm height/risers of steps with soluble salt porcelain vitrified tiles length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like Cuddapah stone, cement, sand and water for finished item of work.

Ornamental plastering to Ceiling 12mm thick in CM (1:3) with dubara sponge finish ,mixing mortar, finishing, scaffolding, lift charges, including cutting of Grooves wherever necessary as directed by Engineer-in-charge, curing, etc., complete for finished item of work. -GROUND FLOOR

Plastering with CM 2 coats, 12 mm thick, base coat in CM (1:6), 8mm thick and top coat in CM (1:3), 4mm thick with sponze finishing for internal walls. GROUND FLOOR

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work

Supply and fixing of sal wood Door double shutter of size 1.20x 2.13 mt with frame made of well seasoned sal Wood scantlings of size 100 x 75mm and Flush door shutters, solid bond wood block board type with commercial ply on both faces.: 30 mmthick including fixers of 6 nos of 9" ' z" holdfasts, 300 mm long Aluminum aldrop-1 no, 250mm Aluminumtower bolt - 2No, 150mm Aluminum tower bolt - 2no, 125 long Aluminium butt hinges 6 No's, Aluminum fancy handles 150 mm -2nos with necessary screws complete.

Supplying and fixing of Fixed Louvered Ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, The section for louvered ventilators should be of of 33 x 56 mm Box section paneled with 4 mm pinhead glass with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner bracket . corner brackets made of CRCA with Zinc Phosphate. The frames to be fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6" pitch complete for finished item of work. Ventilators: Fixed louvers 2'-0" x 1'-0" (609.6x609.6mm)(Box section) outer frame section size of 33 x 56 mm

Painting to New wood work with two coats of ready mixed first quality synthetic enamel paint of approved brand and shade over primary coat of wood primer grade I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors (APSS No. 1201 &1208).

Supplying, fitting and placing HYSD bar reinforcement Fe-415, in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded For Stilt floor

Supply and Fixing of 20mm dia 1.5mm thick surface P.V.C. pipe (ISI MARK) Concealed in slab with all accessories fixing on chromium plated metallic base saddles and decolam board for switches for Light, Fan and separate plug point including all labour charges etc., complete

Supply and Fixing of 25mm dia 1.5mm thick surface P.V.C. pipe (ISI MARK)Concealed in wall with all accessories fixing on chromium plated metallic base saddles including all labour charges etc., complete for run of mains.