Fabrication and Erection of Single Decker and Double Decker Trolley Of Heating Chamber Electricity Transformer Repairing Workshop Bareilly, Budaun and Shahjahanpur under EWD-Bareilly

Amount

Fabrication & Erection of Single Decker Trolley (7.5x5.5) feet • The scope of work consist of fabrication of single decker Trolley for heating chamber of size 7.5X5.5 feet approximately. The Trolley will be fabricated having provision of Four side M.S Pillar as the leg. Trolley will be fabricated having provision of Four side M.S Pillar as the leg .The Trolley will be made out of suitable size of M.S Channel of 100 x 50 x 6 mm. Top plate is to be fixed in the trolley with double support mounted of 4 mm thick sheet with welding & smooth finish for a load of 3 MT capacity . Suitable design MS Plate supported by 2 pairs of wheels with bearing on the trolley, moving on track .supports laid in the bottom floor with extension on door side for full discharge . The rail track will be made of MS Bar 02 nos. of size 50 mm x 50 mm with 18 ft. long. • The complete trolley will be painted with two coats of Red –oxide primer and then with two coats of heat resistive Aluminum Paint outside ISI Mark as per relevant both inside & outside .All Mild steel materials shall be of quality as per relevant ISS. The MS bar rail track should be properly grouted by CC the floor.

Fabrication & Erection of Double Decker Trolley (Size of Trolley) i.) Length : (2235 mm) ii.) Width : (2235mm) iii.) Height : ( 750 mm ) Heating Chamber is provided with the double Decker trolley in to two floor lower & upper. • The Trolley will be fabricated by Double Decker System with the provision of Four side M.S Pillar as the leg & frame height 750 mm . The Trolley will be made out of suitable size of M.S Channel of 100 x 50 x 6 mm. 4 mm thick steel plate is to be fixed on both Trolley with welding and smooth finishing for carrying a load of 3 MT approximately having Suitable design for moving on track, supported by 2 pairs of wheels with bearing on each trolley. M.S. Rail track will be laid in the bottom floor with extension on door side for full discharge. The rail track will be made of MS Bar 04 nos. of size 50 x 50 with 18 ft. long. The complete trolley will be painted with two coats of Red –oxide primer and then with two coats of heat resistive Aluminum Paint outside ISI Mark as per relevant both inside & outside .All Mild steel materials shall be of quality as per relevant ISS. The work also includes the fabrication and laying of rail track made of MS Bar 04 nos. of size 50 mm x 50 mm with 18 ft. long. The MS bar rail track should be properly grouted by CC the floor.

R.D. ENTERPRISES

LAXMI CHAND AND COMPANY

M/S SUPER ENGINEERING TRADERS