CWE/FZR-29/2021-22 Special repair to internal road of MT Park of HQ AD BDE (CAMP) at Dholewal Mil Complex under GE Ludhiana

Amount

M&L Repair to pot holes in road surface not exceeding 1 Sqm in area & depth 30 mm (average) of each including sweeping free from dust and mud or water, scoring sunken surfaces in roads etc cutting around edges at least 25mm in depth, making good by applying a tack coat of bituminous primer (paving bitumen VG-30) @ 5kg/ 10sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8kg/10sqm, blinded with 0.06 cum of stone chipping, 6.3 mm size as specified for bituminous carpet 30 mm thick, well rammed, complete all as specified.

M&L preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, applying evenly a priming/tack coat with bituminous primer (paving bitumen VG-30) @ 5 kg per 10 Sqm of road surface by sprayer operated by hot pressure mechanism to receive butumen macadam, complete all as specified and as directed.

M&L Premix bituminous macadam laid/rolled and compacted to required gradient and camber (consolidated) thickness 75 mm or less by binder content (paving bitumen VG-30) of 4% by weight of total mix laid with self propelling mechanical paver and rolling with 8 to 12 tonne power road roller to the required camber and gradient to uniform smooth surface, complete all as specified and as directed.

M&L Bituminous premixed asphaltic semi dense concrete (Design Mix), 30 mm consolidated thickness using minimum 5.5% binder content paving bitumen (VG-30) by weight of total mix laid with self propeling mechanical paver and rolling with 8 to 12 tonne power road roller to the required camber and gradient to uniform smooth surface, complete all as specified and as directed.

M&L for Providing and marking broken/continuous central/end line on the road pavement and the like of any description and width using hot applied thermoplastic compound 2.50mm thick (excluding thickness of glass beads) and providing reflective glass beads @ 250 gm per square metre as per IRC-135,confirming to MOSRT&H, complete all as specified. Make-STP/Asian Paint/Auto Mark. Note:- The painted surface shall stand out boldly and solidly without showing signs of brush marks or surface underneath, if necessary, the surface shall be repainted untill the desired results obtained.

S&F as in repair road studs/cat eye of size 100x100x25mm, body of studs is made of ABS material with two reflectors fitted in the body. The road stud is dyanamically designed so that it can bear load upto 25 Tons and its impact strength is about 230 KN weight of stud is 130gms. Body colour yellow with swareflex beads of size 100mmx19mm fixed on roads by nails at intervals complete all as specified and as directed.

H G CONSTRUCTION COMPANY