REPAIR MAINTENANCE OF CIVIL AND ELECTRICAL WPROKS TO MARRIED ACCN OF OFFICERS UNDER GE (NORTH) BINNAGURI

Amount

SCHEDULE A CIVIL WORKS Taking down chowkats with shutter (without taking off shutter from the frame) n. exc 1.5 Sqm each etc including removing material from work site complete all as specified and directed.

Supply and Fixing solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supply & fixing in opening as per specification & drawing and as directed.

Supply and Fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side as gap insert for top rails bottom rail, panelling of plain colour PVC sheet to be fitting in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drg and as directed.

Supply and Fixed of 100 mm long medium weight, stainless steel butt hinges complete all as specified and directed.

Supply and fixing of aluminium, anodised, barrel tower bolts of extruded section and fixed, 150 mm length of bolt complete all as specified.

Supply and Fixing of aluminium handle cast type anodised 125 mm size etc complete all as specified and directed.

Supply and fixing in repairs 300 mm long Aluminium alloy. Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified.

Supply and Fixing in repairs 300 mm long, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Supply and fixed in repairs fancy type Harrison Rails, 20 mm dia mild steel, chromium plated with fixing brackets, stops, rollers etc. of aproved quality all as specified.

Supply and fixed in repairs of steel window pegstay copper oxide coating with nut bolt & washers complete all as directed.

Supply and fixed in repairs of steel window handles, left/right copper oxide coating with nut bolt & washers complete all as directed.

Supply and fixing in repairs of 150 mm brass floor door stopper fixed in position complete all as specified and as directed.

Supply and fixed in repairs Plain , Aluminium sheeting, 0.56 mm thickness Alloy 31000 H4 as in door shutter, drip and straight flashing ( length and girth as fixed) with screws/pins complete all as specified and as directed.

Supply and fixed in repair PVC waste pipe (1 meter length) with CP waste coupling 100 mm dia bore for steel sink complete all as specified.

Supply and fixed in repairs toilet paper holder chromium plated of approved quality complete all as specified and directed .

Supply and fixed in repair corner glass shelf of 5.5 mm thick sheet glass shelf of size 12 cm x 12 cm with chromium plated guard and railing fixed in same position all as directed.

Supply and fixed in repairs chromium plated health faucet/ hand shower 70mm dia with crutch or butterfly handle alongwith 1.50 meter flexible tube and wall hook fixed in position complete all as directed. .

Supply and fixed in repairs PTMT connections 15 mm size with PVC nuts of length 450 mm complete all as specified.

Supply and fixed in repairs brass spindle for bib tap/ stop cock/ pillar tap/ cock/ as per existing spindle complete all as specified.

Supply and fixed in repairs brass spindle for wall mixer / WHB mixer as per existing spindle complete all as specified.

Material and labour for applying rust removing chemical to hings of steel window shutter not esc. 1 sqm each, removing all rust .scalling, dirt etc. from the hinges by wire brushing including necessary minor repair if required for making shutter operational and applying greasing to hinges joints for smooth functioning of steel window complete all as directed.

Supply and fixing in repairs 100 mm size Mortice lock, verticle type brass plate, 6 lever with handle (righ/left position) for aluminium door / wooden door all as specified and directed.

Supply & fixing in repair Double action floor spring hydraulically regu-lated made up of minimum 1.25 mm thick aluminium alloy sheet foun-dation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Supply and fixing in repairs aluminium body ( extruded section ) Door closer hydraulically regulated, designation No. 3, universal type , suitable for door shutters 851 to 1000 mm in width and of weight between 61 to 80kg complete all as specified.

Supply and fixing in repairs centre lock 6 lever 125 mm long for aluminium door shutter complete all as specified.

Supply and Fixed in repairs of 100 mm long aluminoium butt hinges for aluminium door shutter complete all as specified and directed.

Supply and fixing in repairs 75 mm long Hasp and staple , safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), in floors, aprons etc .laid dry or laid dry and pointed including removing of demolished material from work site at any distance outside MD land complete all as specified and directed.complete all as specified.

Material and labour for 8 to 9 mm thick vitrified ceramic (square/rectangular) dark shade coloured polished tiles, (1st quality) area of each tiles not exc 0.38 sqm and 10mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white cement and pigment to match over 15 mm thick screeding in CM 1:4 complete all as specified ( screed bed shall not be measured and paid separately).

Material and labour for 8 to 9 mm thick vitrified ceramic (square/rectangular) Coloured polished tiles, (1st quality) area of each tiles exc 0.18 sqm but not exc 0.38 sqm and 10mm thick, in verticle surface etc. set and jointed in neat cement slurry and pointed in white cement and pigment to match over 10 mm thick screeding in CM 1:3 complete all as specified ( screed bed shall not be measured and paid separately).

Material and labour for Non Skid ceramic coloured tiles (1st quality) 7 to 8mm thick ( square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. over and including 15 mm thick screeding in CM 1:4 complete all as specified ( screed bed shall not be measured and paid separately).

Material and labour for glazed ceramic coloured / digital printed of size (300 x 200 mm / 300 x 450 mm x 7 mm thick ) as in vertical surfaces such as skirting/dado / riser to steps etc conforming to IS - 13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including cement screed bed / backing layer of 10mm thick in cement mortar (1:3) complete all as specified and as directed. (Note: screed bed shall also deemed to be included in the quoted rate by the contractor ).

Material and labour 20 mm thick Granite ( of any type) work ( table rubbed and polished) in steps , jambs, pillars, window cills, cooking plateforms and like in cement mortar ( 1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20mm thick screeding in CM 1:4 complete all as specified.( Note Screed bed shall not be measured and paid separately).

Dismantling PVC water tanks exceeding 500 litres but not exceeding 1000 litres capacity, including removing ball valve and removing unserviceable tank from work site complete all as specified

Supply and fixed rotational moulded poly-ethylene multilayer water storage tanks ( cylinderical vertical with closed top ) 1000 litres capacity ,hoisted and fixed in position complete all as specified.

Dismantling PVC water tanks exceeding 250 litres but not exceeding 500 litres capacity, including removing ball valve and removing unserviceable tank from work site complete all as specified

Supply and fixed rotational moulded poly-ethylene multilayer water storage tanks ( cylinderical vertical with closed top ) 500 litres capacity ,hoisted and fixed in position complete all as specified.

Supply and fixed ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms complete , screwed for 20 mm bore dia. pipe or brass ferrule complete all as specified.

Taking up or down steel tubing and connections, including cleaning for re-fixing and removal of unserviceable pipe from work site,15 mm bore dia all as specified.

Taking up or down steel tubing and connections, including cleaning for re-fixing and removal of unserviceable pipe from work site, 20 mm bore dia all as specified.

Supplying, laying, jointing and testing 15 mm nominal bore dia, galvanized tube medium grade fixed to walls, ceilings or laid in floors etc, any type of pipe including necessary fittings and jointing complete all as specified and as directed.

Supplying, laying, jointing and testing 20 mm nominal bore dia, galvanized tube medium grade fixed to walls, ceilings or laid in floors etc, any type of pipe including necessary fittings and jointing complete all as specified and as directed.

Refixing old steel tubing and connections in new or old position ( walls, ceiling , floors, etc.)15 mm nominal bore dia, including new fittings complete all as specified ( Note:- Refixing means including cleaning down existing pipes and fittings. )

Taking down cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, any description etc.including removing of rubbished material from work site complete all as specified.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces , in cement and sand mortar 1:4 using water liquid water proofing compound @ 200 ml per bag of cement or as per manufacturer's instructions (WPC shall be measured and paid separately) complete all as specified top surfaces finished even and smooth without using extra cement complete all as specified.

Material and Labour for rendering 15 mm thick on fair faces of brick or concrete surfaces finishing surfaces even and smooth without using extra cement in Cement mortar 1:6 all as specified and directed.

Material and labour for rendering 5mm thick on concrete surfaces in ceiling , soffit of slab, chajjas, column and beams etc. , in cement and sand mortar 1:3 complete all as specified

Supply only Integral liquid water proofing compound conforming to IS-2645-2003 complete all as specified.

Material and labour for preparation of new/untreated surfaces/ of walls and applying applying two coats of colour wash including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

Material and labour for preparation of new surfaces of walls and applying wall care white putty and sand papering surfaces to achieve smooth surfaces and applying two coats of acrylic based distemper emulsion over a coat of cement based primer, white or tinted including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

Material and labour fo preparation of new plastered or unplastered surafces of wall and applying three coats of white wash including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

Material and labour fo preparation of new plastered or unplastered surafces of ceilings and applying three coats of white wash including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

Demolition Brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles including removing of demolished materialfrom work site complete all as specified.

Material and labour for brickwork with fly ash bricks, old size, having compressive strength 75Kg sqcm, straight or curved on plan excd 6 M mean radius in built in cement and sand mortar 1:6 complete all as specified.

Supply and fixed in repairs stainless steel sink with draining board , made out of 1mm thick sheet for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets, including PCC work for fixing of brackets, connecting union overall size 915 mm x 460 mm with bowl size 410 mm x 355 mm x 165 mm completecomplete all as specified.

Supply and fixed in repairs vitreous china wash basin (WHB) , white , flat back , size 550 mm x 400 mm (1st quality) including brackets, waste fittings , brass Chromium plated for glazed basins etc. with long screw shanks and fly nuts , flange end embedded in red lead cement , including cutting for and pinning in ends of brackets or erecting stand but but incl providing brackets, waste pipe & CP waste coupling complete all as specified and as directed.

Supply and fixed in repairs low level flushing cistern (dual-flush), 9-10 litres capacity ISI marked embossed moulded from virgin poly propylene including flush pipe complete all as specified and directed.

Supply and fixed in repairs vitreous China white Squatting pan ,'Orissa' pattern size 580 mm x 440 mm with integral footrests water closet) with 'P' or 'S' trap front or back inlet complete including lime concrete for bedding, connection to drain pipe and to flushing pipe , anti syphonage pipe etc complete all as specified.

Supply and fixing in repairs Plastic water closet seat, white, closed pattern with flat bottom , and cover and PVC hinging device complete all as specified.

Supply and fixed in repairs white vitreous china wash down water closet pan (pedestal pattern) EWC, of size 520 x 360 x 390 mm with ‘P’ or `S' trap, including fixing bolts, Plastic water closet seat and cover, closed pattern with flat bottom, and mild steel chromium plated or aluminised hinging device, including PVC low level flushing cistern including making all necessary connections complete all as specified and as directed.

Supply and fixed in repairs, Chromium plated Bib taps with cup , cast copper alloy with crutch handle, screwed for 15 mm bore dia. iron pipe or for brass ferrule and fixed complete all as specified.

Supply and fixed in repair, CP stop cock ( concealed type) long fancy type screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified

Supply and fixed in repair CP angle stop cock with flange , screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified .

Supply and fixed in repairs CP Brass water Jet assembly with flexible PVC pipe 1.0 metre length connector to EWC water closet complete all as specified.

Supply and fixed in repairs, central hole basin mixer swan neck, cast copper alloy with capstan head , chromium plated screwed down, high pressure with or without lettered "hot" or "cold" with long screwed shank and fly nuts screwed for iron pipe of 15mm bore complete all as specified and as directed.

Supply and fixed in repairs, wall mixer swan neck, cast copper alloy with capstan head , chromium plated screwed down, high pressure with or without lettered "hot" or "cold" with long screwed shank and fly nuts screwed for iron pipe of 15mm bore complete all as specified and as directed.

Supply and fixing in repairs CP Brass Tubular towel rail, 20 mm dia. D type, 60 cm long between flanges complete all as specified.

Supply and fixed in repair, pillar taps, fancy type, cast copper alloy , with capstan heads, chromium plated , screwed down for 15 mm bore pipe,high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified.

Supply and fixed in repairs steel plate rack of size 600 mm x 900 mm x 250 mm, made of 0.63 mm thick stainless steel sheet, having of three different sizes of plate, shelves for cups and suucer etc and hook fixed to wall with CP brass screws etc. complete all as specified. Make : Parayg/ Blue star / Jainya.

Supply and fixed in repairs mirror cabinet of size 350 mm x 450 mm fixed in wall Brass screws and cup washers complete all as specified.

Supply and fixed in repairs Cast Brass chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union in repairs complete all as specified.

Supply and fixed in repairs of grating doom 125 mm dia of PTMT (Minimum weight 40gms) complete all as specified.

Supply and fixed in repair sheet glass assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long which necessary or directed.

Demolition of cement concrete ( unreinforced ) in ground floors and pavings not exceeding 15 cm thick above or below ground level, including removing of demolished material from work site at any distance outside MD land complete all as specified and directed.

Material and labour for 75mm thick PCC (1:3:6), type C-2 (using 40 mm graded crushed stone aggregate ) as in plinth protection; pathway / hardstanding etc laid in bays / panels not exc. 2.00 Sqm each including construction joints at suitable interval and each corner and filled with bituminous mastic filling (1 part bitumen & 3 part sand) and finished the surface even and smooth without using extra cement complete all as specified.

Material and labour for prepolished chemically treated coloured chequered cement concrete tiles of size 300 mm x 300 mm x 25 mm thick set, jointed and pointed in neat slurry in floors and steps with grey cement and pigments laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) including demolition of of old tiles complete all as specified ( screed bed shall not be measured and paid separately).

Supply and fixing in repairs 4 mm thick (nominal) Sheet glass, ordinary quality , in squares, not exceeding 0.50 sqm each each pane fixed with oil putty complete all as specified.

Supply and fixing in repairs 4 mm thick figured glass, pin head type and ordinary quality , in squares, not exceeding 0.50 sqm each each pane fixed with oil putty complete all as specified.

Material and labour for taking down and refixing in same opening of rolling shutter exc 2 sqm but not exc 6 sqm including easing & adjusting and refixing in same position with greasing rescuring etc after necessary repair works / eassing and adjusting complete all as specified and directed.

Resucuring or easing & adjusting, taking down aluminium door shutter not exc. 2sqm each and refixing in the same opening after certain repairs to shutter floor top self closing device, top pivot including changing rubber beading, fiber beading, handles etc, complete all as directed.

Suppy and fixed in repairs, powder coated anodised aluminium frame of size 100mm x 44mmx 1.5 mm thickness of sections made of Square/tubular Aluminium section for door with one or more rebates jointing cleat for fixing etc and provision of aluminium door shutter (Single/Double shutter) including necessary jointing cleats glazing clips, rubber gasket aluminium anodised snap beading, screws, hold fast, Aluminium hinges 3Nos 100mm long for each shutter, floor stopper, locking arrangements handle, 5.5mm thick tinted glass fixed in panels with aluminium guard bar complete all as directed.

Suppy and fixed in repairs, aluminium anodized louvered ventilators with glass louvers , without sash bars, of aluminium sections weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings and with suitable locking arrangements tc.complete all as specified.

Suppy and fixed in repairs, powder coated aluminium window sliding type three track (one gauge and two glazed shutter) aluminium sections weighing not less than 0.55 Kg per mtr for shutter including necessary jointing cleats, glazing cleats, rubber packing, screws, handle, locking arrangement etc complete and 5.5 mm thick tinted glass and stainless steel mosquito proof gauge complete all as specified and directed.

Supply and fixed in repairs 18 to 20 mm thickness green marble corner shelve of size 300mm cut to shape including rounding complete all as directed.

Taking down of rolling shutter of any description exc 2 Sqm each etc including removing material from work site complete all as specified and directed.

Supply and Fixing 1.25 mm thickness of laths, steel rolling shutters , without ball bearing , as specified including top cover , anchoring rod, hasp and staple and one shop coat of primer;erected in position as indicated, complete ; push pull or manual typeas directed.

Supply and Fixing Ball Bearing with spring for rolling shutters complete all as specified.

Material and labour for one coat of exterior emulsion paint 100% acrylic, white or tinted on old painted surfaces of wall/chajja//facias including prepration of old surfaces and washing floors, cleaning glass, joinery,electrical fittings, wiring etc., of drops and splashes complete all as specified .

Material and labour for preparation of new surfaces of walls and applying wall care white (Putty) thickness and sand papering surfaces to achieve smooth surfaces and applying two coats exterior emulsion paint 100% acrylic, white or any tinted, over a coat of cement based primer including washing floors, cleaning glass, joinery,electrical fittings, wiring etc., of drops and splashes complete all as specified .

Dismantling of corrugated steel sheets in roof coverings including ridges, removing of unserviceable material from work site complete all as specified and as directed.

Supply and fixed Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

Supply and fixed Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 600mm wide, 0.50mm thick of an colour having tensile strength of 550 Mpa as in ridges, valley, eaves, etc with self tapping screws as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, removing of unserviceable material from work site complete all as specified and as directed.

Supply and fixed rolled mild steel in roof trusses, ( framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing ( Beam, tee,angle,channel or flat sections ) including distance pieces , cleats etc. grade Fe-410-W ( Gde-E-250) quality -B complete all as specified.

Supply and fixed in repairs 18/19 mm thick prelaminated particle board,interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in kitchen cabinet shutter/ cupboard wall panelling including 6 mm thick wooden beading complete all as specified.

Taking down of steel window/ ventilator of any description and size complete including removing material from work site complete all as specified and directed.

Supply and fixed Steel windows with side hung shutter including box type hinges with steel handle, and steel peg stay, complete with glazing bars , dovetailed or welded complete all as specified.

Supply and fixed Steel windows with side hung shutter including box type hinges with steel handle, and steel peg stay, complete without glazing bars , dovetailed or welded complete all as specified.

Supply and fixed mild steel framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290-Gde E-165 complete all as specified and directed.

Material and labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamelled paint (1st quality) over one coat of red oxide Zinc chrome primer complete all as specified.

INTERNAL ELECTRIFICATION Taking down carefully aluminium conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified.

Material & Labour for consealed type point wiring with 1.50 Sqmm (nominal cross sectional area) PVC insulated (FRLS) unsheathed single core multi stranded copper conductor cable of working voltage 1100 volts grade conforming to IS-694 Pt I & II of 2000 drawn through and including PVC conduit of adequate size having a wall thickness not less than 1.5 mm with all accessories (including cutting chases & making good the disturbed surface to its original specification), including provision of 1.5 Sqmm (nominal cross sectional area) PVC insulated (FRLS) unsheathed single core multi stranded copper conductor cable as earth continuity conductor, connected to main switch / DBs or common earth dolly for one light / ceiling fan /exhaust fan/ bell/buzzer point controlled by one 5 Amps one way switch complete all as specified and as directed for light /fan point controlled by one way switch 5/6 amps. Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.

All as per item No.103 here-in-before but for one socket out let 5/6 amps point on the independent board

All as per item No.103 above but One socket out let 5/6 amps point on the same board complete all as specified.

All as per item No.103 above but One light point controlled by two way switch 5/6 amps.

Material and labour concealed wiring for 5/6 pin 6/16 Amp switch socket combination on independent boards controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FR earth wire and connecting to earth dolly and brass screws, washers etc. including cutting chases pinning in for concealed conduit wiring and making good of disturbed surface n exc 15 cm girth complete all as specified.

Supply and fixed switch piano flush type, single pole , 6 Amps, one way complete all as specified.

Supply and fixed switch piano flush type, single pole , 6 Amps, two ways complete all as specified.

Supply and fixed socket 2 in 1, 5 Pin, 5/6 amps, any type complete all as specified and as directed.

Supply and fixed switch socket combination 2 in 1 multipurpose 5 pin , (6 Amps ) flush type controlled by one switch complete all as specified.

Supply and fixed switch piano flush type, single pole , 15/16 Amps, one way complete all as specified.

Supply & fixed Bell push , flush type , 5/6 amp complete all as specified.

Supply & fixed ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified.

Supply & fixed in repairs Ding dong, AC 230 Volts, single pole 230 volts all as specified and directed.

Supply and fixed switch in repairs socket combination 2 and 3 Pin, 5/6 amps, multipurpose of any type flush type controlled by one switch complete all as specified.

Supply and fixed in repairs switch socket combination 2 in 1, 6 pin 5/6 amps and 15/16 amps multipurpose, of any type complete all as specified.

Supply & fixed in repairs LED white glass Lamp 1x14 Watts, 230V Base-22 complete all as directed.

Supply & fixed stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified .

Supply and fixed switch in repairs modular socket outlet 5 Pin, 5/6 amps,two-in-one 230 volts flush type complete all as specified.

Supply and fixed switch in repairs modular socket outlet 15/16 amps, 230 volts flush type complete all as specified.

Supply and fixed in repairs modular switch piano flush type, single pole , 6 Amps, one way complete all as specified.

Supply and fixed in repairs modular switch piano flush type, single pole , 15/16 Amps, one way complete all as specified.

Supply & fixed in repairs modular fan electronic regulator 1/2 module 230 volts Ac 50 Hz complete all as specified .

Supply and fixing in repairs of LED light fittings 1 x 18/20 watts 230 Volt white powder coated slim box type batten made of formed CRCA with snap on installer LED lighting fixture with and including 1x18/20 watt T8 double side connection retrofit LED tube with G13 lamp holders, connector block, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable up to cealing rose complete all as specified and directed. Make : Havells Cat No: REGALBATTEN8 UPTO 1 x 22W SSBSWH & Cat No: PHOTONULTRA 1213T8 SSTL20W LED 865 SPC (Tube) or of equivalent make as specified in list of makes

Supply and fixing in repairs LED tube light fittings 1 x 9/10 watts energy efficient, 230 V incl 1x9/10 watt LED tube, surface / wall mounted LED batten with aluminium housing and integrated driver including holders, connector block etc. complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable all as specified and directed. Make : Havells Cat No LUMILINEPLUSBS10WLED865SPCSS or of equivalent make as specified in list of makes

Supply and fixing in repairs bi-pin holder suitable for 20/40 Watt T/L fitting complete all as specified and directed. Make : Surya/CG/Bajaj.

Supply and fixing in repairs hylam sheet 3 mm thick white in colour of size 130 mm x 180 mm complete all as specified and directed.

Supply and fixing in repairs hylam sheet 3 mm thick white in colour of size 120 mm x 170 mm complete all as specified and directed.

Supply and fixing in repairs hylam sheet 3 mm thick white in colour of size 230 mm x 280 mm complete all as specified and directed.

Supply and fixing in repairs hylam sheet 3 mm thick white in colour round type of size 80 mm dia i complete all as specified and directed.

Materials and labour for Sub main wiring with 2 runs of 6.00 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core flame retardant cable (FRLS) of working voltage 1100 volts grade with stranded copper conductor including one run of 6.00 Sqmm (nominal cross sectional area) PVC insulated unsheathed flame retardant cable (FRLS) with stranded copper conductor as continuous earth wire connected to main switches DBs or in common earth dolly, drawn through and including PVC rigid non- metallic PVC conduit / casing and capping ISI marked , medium garde of adequate size with all conduit / casing and capping accessories ISI marked as required complete all as specified and as directed including taking down old unserviceable / burnt / damaged one. [NOTE : Two run of sub main wiring cable along with one run of earth wire and one run of PVC Conduit / casing and capping shall be measured as one length]

Supply & fix sheet metal enclosure for 12 way Distribution Boards (DB’s), double door , single pole and neutral with 200 amps rated bus bar, including bus bar neutral link, earth bar and din rail, IP-43, IK-09 protection including gasket and door earthing suitable for fixing MCBs/isolators fixed on wall surface and making good the disturbed surfaces of wall and connecting up including taking down old unserviceable one complete all as specified and as directed.

Supply and fixed in repairs MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Supply and fixed in repairs MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Supply and fixed in repairs MCB SPN 40 to 63 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Supply and fixed in repairs for Single pole and neautral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 20 Amps, 240 Volts, including necessry connection complete all as specified including taking down old one

Shri Amarnath Sah

MESSRS SEN BROTHERS

L. B. SHARMA

BBKundu

M/S VIRENDRA KUMAR SINGH

M/S JAGDISH PRASAD AGARWALA

Ms Singh Co