2216 housing M&R S.R.

Name of work: A&A to Arm.Al Cable , Pole Box , ELCB and Other Necessary Iteams in Various Hostel Building and

Resident Quarters in Rajkot City .

Item Quantities estimated but Item of work Tendered Rate Total amount

Item Quantities estimated but Item of work Tendered Rate Total amount

No. may be more or less according to

Qty. Unit estiamted

Replacing Old & u/s by Supplying & erecting approved make

SMC press moulded composite FRP. loop-in, loop-out

approx. 2mm thick box complete with Bakelite connector strip

5way(3P+N+E),DIN rail for mounting mob & hinged doors as

1 750.00 Ea per requirement having locking arrangements with mounting 515.10

clamp with nuts, bolts & washers suitable for erection on pole

with cable clamps& earth bolt of following size of box.(B)

250mm x 200mm x 100mm [deep]

Replacing Old & u/s by Supplying and erecting B class

galvanised iron pipe 32 mm outside dia 45 cm long duly

welded on 20 cm x 20 cm x 3 mm thick M.S. base plate,

erected on wall or corner for mounting street light luminaire

with necessary hardware materials duly painted.

Providing and erecting ISI mark Medium class RIGID PVC

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction boxes

fixed with adhesive solution & Clamps with following dia of

pipes, in approved manner as directed (a)20 mm

Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with

toughened glass with company mark/name engraved or

4 embossed 160 to 270 V,Power Factor more than 0.95, THD < 0.00

10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency >

85 %.( fittings required LM-79 & LM-80 certificates)(NOTE:

Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage

protection.(iii) 60 - 89 watts Cat-lll

Replacing Old & u/s by providing and erecting Miniature

circuit breaker single pole 0.5A to 2A system and having

5 750.00 Ea breaking capacity 10 KA to be erected in existing box. 297.95

confirming to IS 8828/1996 with ISI Mark Cat.III

Replacing Old & u/s by Providing and erecting FRLS-XLPE

(IS:7098)(I)-88 ISI armoured cable multistrand / Solid

Aluminium conductor for 1.1 kV. to be laid on wall with

6 1300.00 Mtr necessary clamps or in existing trench / pipe of following size 151.50

of cables (B) 4 core 6 Sq. mm

Replacing Old & u/s by Providing and erecting FRLS-

XLPE(IS:7098)(I)-88 ISI armoured cable Aluminium

conductor for 1.1 kV. to be laid on wall with necessary

7 1600.00 Mtr clamps or in existing trench / pipe of following size of cables. 112.11

(B) 2 core 6 Sq. mm

Item Quantities estimated but Item of work Tendered Rate Total amount

Item Quantities estimated but Item of work Tendered Rate Total amount

No. may be more or less according to

Qty. Unit estiamted

Making trench in Hard Murrum / Tar Road of suitable width of

90 cm or required depth for laying any size of cable or

8 300.00 Mtr locating the fault all over the run and back filling the same 74.74

and making the surface as normal ground.

(B) If additional machinery like hammer driller or JCB use

Providing & laying approved make ISI marked HDPE 6Kg /

cm2 (Class-3) as per IS:4984:1995 PE-80 to be erected at

road crossing on or floor as directed for laying of cable. The

pipes as following size of dia & weight per 6 mtr.(A) 40 mm

Providing and erecting Approved make RCCBs conforming to

IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on

phase and neutral 415V,50Hz. having characteristic of quick

action & tripping with all advance feature & do not

incorporate any electronic component for following Max.

rating erected as directed.(i) 25 Amps.FP Cat. III

Replacing Old & u/s by Providing & erecting 415V MCB Four

Pole Switch for Lighting Load (B curve) having 10KA

11 20.00 Ea breaking capacity & confirms to IS :8828 in existing box 637.31

having following capacity (a) 6 to 32 Amp. Cat.III

Replacing Old & u/s by Supplying and erecting Flexible PVC

insulated multi strand multi core 1.1 kV grade ISI marked

12 1500.00 Mtr copper wires of following size to be erected as directed.(e) 58.58

1.50 Sq.mm 3 core round PVC sheathed

Note:- The Credit of dismentalled materials for Rs.38004.00 shall be recovered from the First R.A. bill payable to the contrator

and there after the dismentalled materials shall be the property of the contractor.

I/We am/are willing to carry out the work at__________________% above/below (in

figures)_____________________________________percent Above / below (in words) the estimated rates mentioned above amount of

my\our tender works out as under :-

Estimated amount put to Tender Rs. _________

Deduct________% below Rs. _________

Net Amount Rs. _________

Estimated amount put to Tender Rs. _________

Net Amount Rs. _________

A I/We hereby declare that I/we have visited the site and fully acquainted my self / our selves with the local

situation regarding material,labour and other factors pertaining to the work before submitting this tender.

B I/We hereby declare that I/we carefully studied the conditions of contract, detailed technical specifications

and other tender documents of this work and agree to execute the same accordingly.

C Any Excess in Tender Item/Extra Item if Needs to be Execute. Contractors has to carry out work on the

instruction of Competant Authority on Tender Submitted rate,No Excuse will be Accepted.Hence Contractor

are Requested to quote the rate considering this condition.

Item Quantities estimated but Item of work Tendered Rate Total amount

Item Quantities estimated but Item of work Tendered Rate Total amount

No. may be more or less according to

Qty. Unit estiamted

D Contractor are requested to quote the Tender by considering that payment will be made after availibility of

grant.Contractor has to start the work immediately after issue of Work Order and as per instruction of Engineer-

in-Charge irrespective of availibility of grant.

E "This estimate has been prepared on the new SOR wich is exclusive of GST hence GST additional will be paid

to the agency as per existing guidelines."

(Signature of the Contractor)

Note 1 Please strike out whichever is not applicable.

2 In the case of tendered amount being quoted incorrectly the quoted pered percentage Below/Above will be