construction of Boundary wall and allied works for labour Sarai Khanpora Bowli, Baramulla

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : Of area of 3 sqm. and below

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: in cement mortar

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) with Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:2:4 (1Cement: 2 coarse sand: 4 grade stone aggregate 20mm nominal size)

12mm Cement plaster of mix in 1 : 4 ( 1 cement : 4 coarse sand)

Providing and fixing of HDHMR wall pennals of thickness 10-12 mm with base of 10-12 mm ply fixed on 1'6"x1'6" frame work of imported KD wood as required on site including Providing and applying of epoxy base for decopaint including surfacer and sandy wherever required and finally applying two or more coats of decopaint of requird shade and colour or as directed by Engineer incharge.

Providing and fixing french type decorative (48mm) wall moulding work over existing HDHMR panelling of approved quality (as directed by Engieer incahrge at site)

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/calcium silicate board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers’ specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting with: 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095-Part 1 : 2011 (Board with BIS certification marks)

Providing & fixing of 6mm thick PVC board panelling of approved quality (Green panel/ Action Tesa) with all necessary fittings including 12mm plyboard base under panelling fixed over 2''x2'' frame work of imported wood with cost of Nails, cornice etc of approved quality all inclusive with cost of labour, materials and carriages of all involved materials complete.

Providing & fixing of 6mm thick PVC board panelling of approved quality (Green panel/ Action Tesa) with all necessary fittings including 10-12mm plyboard base (if required) under panelling fixed over frame work of imported wood / almunium furrings (as per requireemnt) with cost of nails cornice etc of approved quality all inclusive with cost of labour, materials and carriages of all involved materials complete.