Repairs to Static water tank No. 18, 20 and 22 of Dighi Magazine area at AFK.

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level).

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc.

M&L for Hard core of gauge n.exc 63mm deposited, spread, and levelled in layers n.exc 15cm thick, watered and rammed to a true surface using broken stone or boulders.

M&L for Moorum /red bajari filling in floor or pavings, laid in layers n exc 15cm thick,spread, levelled and rammed including watering

M&L for providing cement concrete type B 1:2:4 mix (20mm graded aggregate) in foundations, filling and mass concrete fair finished with necessary centering.

M&L for providing formwork to faces of walls of static water tank, retaining walls, abutments, parapets and staircase railing and similar work including attached pillasters, buttresses, etc. vertical or to batter rough finished curved surfaces of concrete.

M&L for providing Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc rough finished curved surfaces of concrete.

M&L for providing Reinforced Cement Concrete M-30 grade (Design mix) (20mm graded aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete.

M&L for providing Reinforced Cement Concrete M-30 grade (Design mix) (20mm graded aggregate) in walls/water tank walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses.

M&L for providing Reinforced Cement Concrete M-30 grade (Design mix) (20mm graded aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span

M&L for deformed or twisted bars 10mm Dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L for deformed or twisted bars 6mm to 8mm Dia, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

Supplying only Liquid water proofing compound for mixing in cement mortar in RCC and plastering work. Make: Pidilite of Dr. Fixit (303 Pidicrete MPB) and (301 Pidicrete URP).

M&L for rendering 15mm thick in CM 1:3 on fair faces of brickwork or concrete surfaces of walls including setting coat 3mm thick, trowelled to even and smooth finish in cement plaster 1:2.

Removing surplus excavted and demolished material up to a distance exc 1.50 km but n exc 5 km and depositing where directed soil,,P.C.C,Debris etc.

B.K. Associates (BID ID -761774)

J J ENTERPRISES (BID ID -761754)