ADDL/ALTN AND SPECIAL REPAIR TO BUILDING NO 1/2/4 (BN STORE) OF JAT AT BINNAGURI MILITARY STATION UNDER GE (NORTH) BINNAGURI

Amount

Roughening the surfaces of old concrete floor by picking, sweeping, cleaning and washing down with water to remove dust and brushing neat cement slurry with 3.0 kg of cement per Sqm complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and as directed.

M&L for non skid coloured joint free ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but n. exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in whiter or coloured cement to match complete all as specified and as directed.

M&L for 10mm thick rendering in CM (1:4) as in vertical surfaces of skirting, dados etc complete all as specified and as directed.

M&L for glazed ceramic colour tiles of size 300 x 450 x 7 mm thick as on vertical surfaces of wall such as skirting, dado, riser etc. jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile approved by Engr-in-Charge complete all as specified and as directed.

Dismantling water tanks and removing to store of capacity exc 500 & n.exc 1000 ltrs complete all as specified and as directed.

S&F 1000 ltrs rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) including connecting up pipes securing access covers etc complete all as specified and as directed.

S&F 20 mm dia PVC ball cock (PVC float valves) high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required using reducer and check nut complete all as specified and as directed.

Taking up or down GI 15mm bore pipe and connection including cleaning for refixing or removal from site as directed complete all as specified and as directed.

Taking up or down GI 20mm steel tubing and connections including cleaning for refixing or removal form site complete all as specified and as directed.

S&F 15mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors or fixed to wall etc complete all as specified and as directed.

Refixing old 15mm GI tubing and connections in new or old position (walls, ceiling, floor etc) complete all as specified and as directed. Note: The serviceable GI tubing obtained from taking down shall be reused.

S&F 20mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors or fixed to wall etc complete all as specified and as directed.

Refixing old 20mm GI tubing and connections in new or old position (walls, ceiling, floor etc) complete all as specified and as directed. Note: The serviceable GI tubing obtained from taking down shall be reused.

Taking down cement plaster on wall & ceiling of any description including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and as directed.

M&L for applying average 15mm thick plaster in two coats (10+5mm) with ready mixed prepacked dry mix mortar, blended with PP fibres, mixed with liquid water proofing compound on top layer on brick wall or concrete surfaces addititives on external surfaces including transporting of material, mixing, curing scaffolding etc finished the surface even and fair without using extra cement complete all as specified and as directed. Note : Liquid water proofing compound will be measured and paid separately as supply only.

Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar 1:6 on fair face of brick work or concrete surface finished fair and even (without using extra cement) complete all as specified and as directed.

M&L for rendering 5mm thick plastering in CM (1:3) on ceiling, soffits of slabs, chajjas, columns and beams etc and finished the plastered surface even and fair without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying three coats of whitewash on wall surface complete all as specified and as directed.

M&L for preparation of old plastered surfaces of walls and applying two coats of whitewash wall surface complete all as specified and as directed.

M&L for preparing newly plastered or unplastered surface of ceiling and applying three coats of white washing complete all as specified and as directed.

M&L for preparation of old surfaces of ceiling & applying two coats of white washing complete all as specified and as directed.

Material & Labour preparation of new plastered surface and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces including providing and applying exterior putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed.

Complete removal of existing surface and Material & Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces including Providing and applying exterior putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed.

S&F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size including CP waste coupling, PVC connection 450 mm long, waste pipe & removing the existing Basin, cutting for and pinning ends of brackets or erecting stand complete all as specified and as directed.

S&F in repair 10 ltr capacity dual type PVC flushing cistern low level white colour including PVC connection PVC flush pipe of required length complete all as specified and as directed.

S&F in repairs Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed.

S&F in repairs Vitreous china urinal partition white of size 310x700 mm complete all as specified and as directed.

S&F in repair vitreous china squatting pan Orissa pattern of size 580 x 440mm white with integral foot rest complete including provision of cement concrete bedding complete all as specified and as directed.

S&F in repairs 15mm dia bib taps fancy type cast copper alloy, chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule complete all as specified and as directed.

S&F in repairs 15mm dia stop valves fancy type cast copper alloy, chromium plated with long shank and cup (concealed type) for 15mm bore pipe, screwed both ends including necessary fittings such as sockets for pipe or for union complete all as specified and as directed.

S&F in repair 20mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S & F in repair 15mm bore PVC Connection with PTMT nut of length 600 mm complete all as specified and as directed

S&F in repair 15mm dia fancy type pillar taps, cast copper alloy with capston heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore complete all as specified and as directed.

S&F in repair 15 mm bore angle cock CP with flange complete all as specified and as directed.

S&F in repair for brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed.

S&F in repair soap dish, stainless steel of approximate size 160 x 160 x 90 mm embedded in the wall complete all as specified and as directed.

S&F in repair PTMT towel ring fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 90 gms) complete all as specified and as directed.

S&F in repair swivel shower of brass CP with shower arm 150 mm size for fixing with 15 mm bore GI pipe complete all as specified and as directed

S&F in repair steel ventilator top hung shutter including hinges, steel peg stay, fixing lugs etc complete with or without glazing bars including shop coat red oxide primer compete all as specified and as directed.

S&F figured glass, pin head type 3mm thick in squares n. exc 0.50 Sqm in each pane complete all as specified and as directed.

S&F in repair for 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F in repair 40mm (HDPE) of pressure rating 6 Kgf/Cm2 fixed complete to walls ceilings or in floors etc complete all as specified and as directed.

Taking down chowkat with shutter exc 1.5 sqm and n.exc. 4.00sqm each including Builder's Hardware and removing from site complete all as specified and as directed.

Taking down shutter of any description but exc 1 sqm and n. exc. 2 sqm each including Builder's Hardware complete all as specified and as directed.

Refixing shutter of any description but exc 1 sqm and n. exc. 2 sqm each in same opening after easing etc complete all as specified and as directed.

S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 105 x60 mm complete all as specified and as directed.

M&L for providing plain cement concrete type C-1, 1:3:6, (using 20 mm graded stone aggregate), as in copings, bed block for filing hollow space of steel chowkats, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and as directed.

S&F 30 mm thick Flush shutters, solid core construction, with blackboard core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F Rolled Mild Steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other recovering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges FE-290 Grade E 165 complete all as specified and as directed.

S&F 100 mm butt hinges stainless steel complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section 200 mm long complete all as specified and as directed.

S&F aluminium handles 200mm size cast type anodised complete all as specified and as directed.

M&L for aluminium alloy, anodised sliding door bolt of length 300mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

M&L for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

M&L for preparation of old wooden surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Taking down chowkat with shutter n.exc 1.5sqm each (without taking off shutter from the frame) including Builder's Hardware complete all as specified and as directed.

S&F Solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed including fixing of hold fast as per specification and drawing complete all as specified and as directed.

S&F of factory made solid plain coloured panel PVC door shutter, 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stile and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying & fixing in the frame at site as per manufactures instruction, specification complete all as specified and as directed.

S&F 150 mm long Aluminium anodised barrel tower bolts complete all as specified and as directed.

S&F aluminium handles 125 mm size cast type anodised complete all as specified and as directed.

M&L for preparation of new or previously untreated steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

M&L for preparation of new primer applied steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (Below or above ground level) complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) Type C-2 (40 mm graded stone aggregate) as in plinth protection including finishing the concrete surface even and smooth without using extra cement complete all as specified and as directed. Note: The unit rate quoted shall be deemed to include for providing the concrete in alternate bays n exc 3 mtr long with 12 mm wide and 50 mm deep joint between the bays which shall be filled with mastic filling with hot bitumen 85/25 and 1:2 mix by volume.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mmthick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

M&L for PCC 1:2:4 type B-I (using 20 mm graded stone aggregate) as in coping /benching to sides of foot path diminished fair and even etc complete all as specified and as directed.

Demolition of Reinforced cement concrete of roofs, floors(other than ground floors), beams, staircase, landings, chajjas, facia and similar suspended work complete all as specified and as directed.

M&L for RCC 1:2:4 type B1 using 20mm garaged stone aggregate as in chajjas, beam, column, roof, landing, shelf, platform, facia and like complete all as specified and as directed.

Use and waste form work to chajjas, facia, roof, landing and like for rough finished surface of concrete flat complete all as specified and as directed.

M&L for machine cut pre polished kota stone slab flooring 12-15 mm thick over 15mm thick cement screed bed using cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing(mirror finish) complete all as specified and as directed.

M&L for machine cut pre polished kota stone riser/skirting 12-15 mm thick over 10mm thick rendering using cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and beewax polishing complete all as specified and as directed.

M&L for cement concrete type C2 (1:3:6) using 40mm graded stone aggregate as in surface channels and drains complete all as specified and as directed .

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed .

Taking down tarfelt with cement plaster from roof surfaces and lowering and removing the same to a distance exc. 50m and n. exc. 100m including roughening of old concrete surface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified and as directed.

M&L for 10mm thick screed bed or bedding layer in cement mortar (1:4) mixed with WPC in order to maintain proper slope over existing roof surfaces for applying roof treatment, finished even and smooth without using extra cement complete all as specified and as directed.

M&L PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in roof kerbs, slightly rounded or chamfered on edges, mixed with water proofing compound 200 ml per beg of cement or as per manufacturer instructions finished even and smooth on exposed concrete surface without using extra cement all complete as specified and as directed. Note: Water proofing compound shall be measured and paid separately under relevant item of Schedule 'A'.

M&L for waterproofing coating with polyurethane based water proofing liquid membrane of approved make to be applied by brush with multi coats with minimum dry film thickness of 1 mm including provision of PVC fabric wire mesh of standard size and shall be cured by reaction with atmospheric moisture to give a tough elastomeric waterproof membrane complete all as specified and as directed. Note: The above treatment will be carried out by authorised applicator of approved firm/company.

INTERNAL LELECTRIFICATION Taking down carefully old/unserviceable copper/alluminium any type of point wiring for one light, socket, fan, bell or power etc including all fittings such as switches sockets, holders, light fittings, fan regulators, call bell etc and making good the disturbed surface of wall ceiling complete all as specified and as directed.

M&L for concealed Point wiring including cutting and chasing on wall / roof surface controlled by one switch with 1.50 Sqmm (nominal area) FRLS, PVC insulated 1100 volts grade multi stranded copper conductor single core unsheathed cable and FRLS, ISI marked, PVC insulated 1100 volts grade multi stranded copper conductor single core of size 1.50 Sqmm as earth continuity conductor connected to common earth dolly, not less than 1.5mm thick, drawn through in and including rigid PVC conduit (Medium Grade) of suitable size, with all fittings, ISI marked and accessories, the pipe shall be fixed with clamping and saddle including provision of mild steel terminal boxes/Sunken boxes of suitable size made with 1.22 mm thick mild steel sheet recessed in wall with a coat of black bituminous paint and providing of with 3mm thick bakelite/PVC sheet ISI marked top cover , suitable for fixing of switches / sockets / regulators etc. fixed in recess of wall with brass chromium plated screws and cap washer complete all as specified and as directed for the following :-

One light point controlled by one way switch 5/6 amps complete all as specified and as directed.

One ceiling fan/Exhaust fan point controlled by one way switch 5/6 amps complete all as specified and as directed.

One socket out let 5/6 amps point on the independent board complete all as specified and as directed.

One socket out let 5/6 amps point on the same board complete all as specified and as directed.

All as per item No 82 above but wiring with 2.5 sq mm single core multistranded copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and as directed

S&F switch piano flush type 5/6 amps single pole one way complete all as specified and as directed.

S&F socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and as directed.

S&F of socket outlet 2 in 1, 5 Pin 5/15 Amp multipurpose 230 volt flush type complete all as specified and as directed.

S&F Switch socket combination 2 and 3 Pin, 5/6 amps, multipurpose flush non shutter, non inter locking type white ivory finish with complete all as specified and as directed.

S&F in ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and as directed.

S & F lamp holder, insulated body, with back plate suitable for batten/angle fittings complete all as specified and as directed.

S&F LED white glass Lamp 1x9 Watt 230V Base-22 complete all as specified and as directed.

S & F in deluxe fan Electronic regulator 120/280 volts AC 50 Hzs rotary step white/ivory finish complete all as specified and as directed.

S&F in replacement 4 feet LED light fittings 1 x 18/20 watts 230 Volt white powder coated slim box type (decorative) batten made of formed CRCA with snap on installer LED lighting fixture with and including 1x18/20 watt T8 Single side connection retrofit LED tube with G13 lamp holders, connector block, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable up to ceiling rose complete all as directed by Engineer-in-Charge. Make : Havells, Batten Cat Part No. REGALBATTEN5UPT0X18WDSBSWH, Tube Cat Part No. PHOTONULTRAE2.01213T8SSTL18WLED865SPC or techno commercially equivalent make as listed in List of Makes and as approved by the GE.

M&L for sub main wiring with 2 run of 6.00 sqmm (nominal cross-sectional area) PVC insulated unsheathed single core cable of working voltage 1100 volts grade with stranded copper conductor including one run of 6 Sqmm (nominal cross sectional area) PVC insulated unsheathed cable with stranded copper conductor as continuous earth wire connected to common earth dolly drawn in PVC rigid non-metallic conduit of suitable dia with and including taking down unserviceable sub main, complete all as specified and as directed. Note : Two runs of submain wiring cable alongwith one run of earth wire with and including PVC conduit pipe shall be measured as one unit length.

S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/lsolators complete with and including taking down old unserviceable one complete all as specified and as directed.

S&F MCB, Single pole & neutral, 35 to 63 amps, 240 volts, ‘C’ curve, 10KA all complete with and including taking down old unserviceable one complete all as specified and as directed.

S&F MCB, Single pole, 5 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete with and including taking down old unserviceable one complete all as specified and as directed.

Disconnecting and removing unserviceable building security light fitting of any type from bldg and Supply and fixing new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening separate driver compartment with IP 66 protection and impact resistance of IK07system of not less than 35 Watts IP 66 type including standard fittings pressure die cast aluminium housing, heat resistant toughened glass, epoxy powder coated finish complete with Electronic driver, Surge protector not less than 5 KV ,bracket made out of GI pipe light grade 32 mm dia 1.2 mtr length bent to shape and reduced to required size at top upto 1.2 mtr length by cutting, welding and well finishing including MS clamp of flat iron of size 25 x 5 mm suitable length 2 Nos complete with drilling, hole, fixing with nuts bolts and washers including painted and all accessories duly prewired complete all as specified and as directed. Make : Havells, Cat Part No. ENDURAPEARLSL25WLED75SASYTOPC or techno commercially equivalent make as listed in List of Makes and as approved by the GE.

Material and labour for earthing complete with galvanized steel plate electrodes of size600x600x6mm thick buried directly in ground with earth pit not less than 2.25 meter deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised wire 4.00 mm earth lead by means of nuts, bolts, check nuts and washers including 15 mm bore galvanized iron pipe, medium grade for protection of earth lead upto the length of 7.5 meter towards test terminal and 20 mm bore galvanized iron pipe, medium grade for watering, and providing of charcoal and common salt in alternate layers, including necessary earth work in any type of soil and including PCC pit in PCC 1:2:4 with provision of wire mesh and funnel, complete all as shown in electrical plate No 5 of SSR Part- I including testing complete all as specified and as directed.

M/S RATNESH KUMAR SINGH (BID ID -3097257)

flexpro construction company (BID ID -3096813)

M/s. MD IRSHAD (BID ID -3097496)

S.N. GHOSH AND CO. (BID ID -3096536)

M/S RELIABLE CONSTRUCTION CO. (BID ID -3096847)

BINOD TRADING CO. (BID ID -3096866)

Tirupati Construction (BID ID -3097472)