Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.1 LAccepted-AOC | L1 | Accepted-AOC AGREEMENT EXECUTED | |
| 2 | Rejected-Technical 275 THURUTHY LAKSHAMVEEDU COLONY ANGANWADY ROAD TILE PAVING WARD 7 | THRISSUR | KERALA | 679105 | - | Rejected-Technical L2 | |
| 3 | Rejected-Technical LID AND EW SECTION VELLIYAMATTOM GP RENJU R 1005 SUB TREASURY THODUPUZHA | IDUKKI | KERALA | 685501 | - | Rejected-Technical L3 |
| Sl No | Description | Qty | Unit | BASIL P VARGHES L2 | BHARATH ENGINEERING SERVICE L3 | ANANTHAKRISHNAN P V L1 |
|---|---|---|---|---|---|---|
| 1.00Maintenance | ||||||
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 2.5 | cum | 270 ₹675 | 300.37 ₹750.93 | 257.2 ₹643 Lowest |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 2.9 | cum | 6,000 ₹17,400 Lowest | 7,712.03 ₹22,364.89 | 6,603.72 ₹19,150.79 |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 2,011.6 | kg | 145 ₹2,91,682 | 162.22 ₹3,26,321.75 | 138.9 ₹2,79,411.24 Lowest |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 376.32 | kg | 135 ₹50,803.2 | 156.19 ₹58,777.42 | 133.74 ₹50,329.04 Lowest |
| 1.00 | OD275760/2025-2026:Providing and fixing Aluminum profile sheets .46mm or nearest available thickness .The sheet shall be fixed using self drilling /self tapping screws of size (5.5x55mm)with EDPM SEAL,COMPLETE UP TO ANY PITCH IN HORIZONTAL/ vertical or curved surfaces, excluding the cost of purlins ,rafters and trusses and including cutting to size and shape wherever required . | 188.16 | sqm | 790 ₹1,48,646.4 | 663.3 ₹1,24,806.53 | 567.97 ₹1,06,869.24 Lowest |
| 1.01 | OD275759/2025-2026:od1282598/2021_2022 :Providing and fixing precoated Aluminium sheet roofing accessories 0.50 mm (+0.05%) total coated thickness, using self drilling/self tapping screws complete: Ridges plain (500-600 mm) OD 70/21-22 Modified DAR 12.51.1 | 35 | metre | 440 ₹15,400 | 452.94 ₹15,852.9 | 387.53 ₹13,563.55 Lowest |
| 1.01 | OD294486/2025-2026::Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of stone aggregate, etc. all complete as per the direction of Engineer-in-charge. OD 80/21-22 | 45.3 | sqm | 850 ₹38,505 | 886.97 ₹40,179.74 | 759.5 ₹34,405.35 Lowest |
| 1.01 | OD508007/2025-2026:Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: a) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 3mm thick aluminium composite panel material The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. c) The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. Modified data 25.7 | 32 | sqm | 2,400 ₹76,800 | 2,720.32 ₹87,050.24 | 2,329.38 ₹74,540.16 Lowest |
| 1.01 | OD508062/2025-2026:Providing and fixing 200mm wide uPVC rain water gutter including all necessary fittings and making all necessary connections etc complete as per direction of E-in-C | 32 | metre | 400 ₹12,800 | 418.75 ₹13,400 | 358.57 ₹11,474.24 Lowest |
Tender Value
₹8.5 L
EMD Value
₹21,181
Closing Date
10 Mar 2026, 3:00 pmClosed
Executive Engineer
O/o the Executive Engineer, LSGD Division, Kakkanad, Ernakulam
Refer tender document
2026_LSGD_843013_1
ET252/DPEKM/AE/LSGD/25-26
Open Tender
Civil Works - Others
Item Rate
180 days
O/o The Executive Engineer
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,870
Yes
₹21,181
Yes
6 Jun 2026
3 Mar 2026
11 Mar 2026
3 Mar 2026
10 Mar 2026
3 Mar 2026
Maintenance
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
OD275760/2025-2026:Providing and fixing Aluminum profile sheets .46mm or nearest available thickness .The sheet shall be fixed using self drilling /self tapping screws of size (5.5x55mm)with EDPM SEAL,COMPLETE UP TO ANY PITCH IN HORIZONTAL/ vertical or curved surfaces, excluding the cost of purlins ,rafters and trusses and including cutting to size and shape wherever required .
OD275759/2025-2026:od1282598/2021_2022 :Providing and fixing precoated Aluminium sheet roofing accessories 0.50 mm (+0.05%) total coated thickness, using self drilling/self tapping screws complete: Ridges plain (500-600 mm) OD 70/21-22 Modified DAR 12.51.1
OD294486/2025-2026::Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of stone aggregate, etc. all complete as per the direction of Engineer-in-charge. OD 80/21-22
OD508007/2025-2026:Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: a) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 3mm thick aluminium composite panel material The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. c) The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. Modified data 25.7
OD508062/2025-2026:Providing and fixing 200mm wide uPVC rain water gutter including all necessary fittings and making all necessary connections etc complete as per direction of E-in-C
OD508097/2025-2026:Supply and fixing 3D acrylic letters english letters 25-30 cm or malayalam letters 20-25 cm for name board etc complete as per direction of Engineer in Charge
OD508112/2025-2026:Engaging man coolies
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1422672.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.06 MB
BOQ_1422672.xls
BOQ • 0.26 MB
Requisitionfore-payment.pdf
Tender Documents • 0.17 MB
viewsbd.pdf
Tender Documents • 1.69 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .