Construction of Sub Registar office at Umargam Taluka Umargam Dist: Valsad

No figures

1 Excavation for foundation upto 1.5 m depth including 1068.00 Cumt 149.83

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(B)

Dense or Hard soil

2 Excavation for foundation for depth from 1.5 m to 3.0 m 423.00 Cumt 620.24

including sorting out and stacking of useful materials

and disposing off the excavated stuff upto 50 Meter

lead.(E) Hard Rock

3 Filling in foundation and plinth with sand in layers of 20 59.00 Cumt 460.19

cm. Thickness including watering ramming and

consolidating etc. comp.

4 Filling available excavated Earth (Excluding Rock) in 184.00 Cumt 130.39

trench plinth side of foundation . in layer not excluding

20 cm in depth consolidation each deposited layer by

ramming and watering etc. complete

soil in layer of 20 cm in thickness including ramming

watering and consolidating etc. complete

6 Applying general insecticide pest control treatment to 284.00 Sqmt 89.28

floors, cupboards etc including labour material etc.

complete. Using Imidacloprid 30.5 SC. As Per 6113 Part -

II (0.075% concentration by mass) is recommended

10.5ml chemical diluted with 5 liters of water

application 0.5 liters chemical/ sqm of surface is

recommended as per I.S.

7 Providing and laying cement concrete 1:2:4 (1 Cement : 2- 53.00 Cumt 3683.34

Coarse sand : 4- graded stone aggregates 20 mm

nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

8 Providing and laying controlled cement concrete M150 205.00 Cumt 4100.60

for curing complete including cost of formwork but

excluding the cost of reinforcement for reinforced

concrete work in (A) Foundations, footings,Base of

columns, Plinth Slab and Mass concrete. PCC

9 Providing and laying controlled cement concrete M250 428.00 Cumt 4501.87

and curing complete including the cost of formwork and

excluding reinforcement for reinforced concrete work in

(A) Foundations, footings and Mass concrete.

Item Rate In

Description of Item Quantity Unit Amount

No figures

10 Providing and laying controlled cement concrete M250 22.00 Cumt 7131.41

and curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced

concrete work in Columns, pillars posts and struts

Column Up to Plinth Level

11 Providing and laying controlled cement concrete M200 25.63 Cumt 7086.16

and curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced

concrete work in Columns, pillars posts and struts

Ground Floor

12 Providing and laying controlled cement concrete M200 12.10 Cumt 7086.16

and curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced

concrete work in Columns, pillars posts and struts First

13 Providing and laying controlled cement concrete M200 3.78 Cumt 7126.26

and curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced

concrete work in Columns, pillars posts and struts

Second Floor

14 Providing and laying controlled cement concrete M250 30.00 Cumt 6058.49

and curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced

concrete work in Ground & Plinth BEAMS

15 Providing and laying controlled cement concrete M150 50.00 Cumt 5024.12

and curing complete including the cost of formwork and

excluding reinforcement for reinforced concrete work in

(C) Plinth Slabs

16 Providing and laying controlled cement concrete M200 33.00 Cumt 6022.67

and curing complete including the cost of formwork and

excluding reinforcement for reinforced concrete work in

(C) Ground Floor Beams

17 Providing and laying controlled cement concrete M200 18.00 Cumt 6022.67

and curing complete including the cost of formwork and

excluding reinforcement for reinforced concrete work in

(C) First Floor Beams

18 Providing and laying controlled cement concrete M200 4.00 Cumt 6331.13

and curing etc. complete including the cost of form work

and reinforcement for reinforced concrete work in (C)

Chhajja for Ground Floor

19 Providing and laying controlled cement concrete M200 3.00 Cumt 6331.13

and curing etc. complete including the cost of form work

and reinforcement for reinforced concrete work in (C)

Chhajja for First Floor

20 Providing and laying controlled cement concrete M200 3.20 Cumt 7279.32

and curing etc. complete including the cost of form work

and reinforcement for reinforced concrete work in (C)

Lintal for Ground Floor

Item Rate In

Description of Item Quantity Unit Amount

No figures

21 Providing and laying controlled cement concrete M200 1.20 Cumt 7279.33

and curing etc. complete including the cost of form work

and reinforcement for reinforced concrete work in (C)

Lintal for First Floor

22 Providing and laying controlled cement concrete M200 44.00 Cumt 6578.38

and curing complete including the cost of formwork and

excluding reinforcement for reinforced concrete work in

(C) Ground Floor Slab

23 Providing and laying controlled cement concrete M200 27.00 Cumt 6578.38

and curing complete including the cost of formwork and

excluding reinforcement for reinforced concrete work in

(C) First Floor Slab

24 Providing and laying controlled cement concrete M200 6.00 Cumt 8125.07

and curing etc. complete including the cost of form work

and excluding the cost of reinforcement etc. complete in

(E) Stair case for Ground Floor to First floor

25 Providing and laying controlled cement concrete M200 6.68 Cumt 6252.33

for RCC work and curing complete including the cost of

form work but excluding the cost of reinforced concrete

work in Coping on Ground Floor

26 Providing and laying controlled cement concrete M200 1.50 Cumt 6252.33

for RCC work and curing complete including the cost of

form work but excluding the cost of reinforced concrete

work in Coping on First Floor

27 Providing and laying controlled cement concrete M200 3.50 Cumt 6292.43

for RCC work and curing complete including the cost of

form work but excluding the cost of reinforced concrete

work in Coping on Second Floor

28 Providing and placing epoxy-coated TMT reinforcement 75962.25 Kg 86.41

bars of grade Fe-500D for R.C.C. works including cutting,

bending, binding with 18–20 gauge annealed binding

wire, placing in position as per drawings and

specifications, complete in all Floor upto 2 level.

29 Providing and fixing 90 cm Height Stainless Steel Railing 30.00 Rmt 3626.51

made from anticorrocive 304 grade S S pipe of 50 mm

dia (16 Gauge) as hand rail with S S 304 grade Baluster

of 38 mm dia (16 Gauge) as a vertical support fixed in

RCC slab at 1.2m c/c including three horizontal S S

pipes of 25 mm dia (16 Gauge) at eqal distance fixed by

18.75 mm dia (16 Gauge) S S pipe with baluster

including accessories as per detailed drawing as directed

etc. complete.

30 Brick work using common burnt clay building bricks 80.00 Cumt 4051.78

having crushing strength not less than 35 kg./Sq.Cm. in

foundation and plinth in Cement Mortar 1:5. (1- Cement :

5 -fine sand) (B) Conventional below plinth

Item Rate In

Description of Item Quantity Unit Amount

No figures

31 Brick work using common burnt clay building bricks 116.00 Cumt 4326.75

having crushing strength not less than 35 kg./Sq.Cm. in

foundation and plinth in Cement Mortar 1:5. (1- Cement :

5 -fine sand) (B) Conventional {Ground FLoor}

32 Brick work using common burnt clay building bricks 49.00 Cumt 4326.75

having crushing strength not less than 35 kg./Sq.Cm. in

super structure in Cement Mortar 1:5. (1- Cement : 5 -

fine sand) (B) Conventional {First FLoor}

33 Brick work using common burnt clay building bricks 21.00 Cumt 4367.24

having crushing strength not less than 35 kg./Sq.Cm. in

super structure in Cement Mortar 1:5. (1- Cement : 5 -

fine sand) (B) Conventional {Second FLoor}

34 Half Brick masonry in common brunt clay building bricks 210.00 Sqmt 653.01

having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in

foundation and plinth (B) Conventional in super

structure. for Ground Floor.

35 Half Brick masonry in common brunt clay building bricks 94.00 Sqmt 653.01

having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in

foundation and plinth (B) Conventional in super

structure. for First Floor.

36 Half Brick masonry in common brunt clay building bricks 52.00 Sqmt 659.00

having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in

foundation and plinth (B) Conventional in super

structure. for Second Floor.

37 Providing and fixing 150 mm wide, approved quality 68.00 Sqmt 295.12

chicken wire mesh at junction of brick work and RCC

work or two dissimilar surfaces, at all heights fixed by

nails, rowal plugs or tag by cement mortar 1:3 before

applying the plaster, including curing, scaffolding all

complete as directed.

38 Providing 15mm thick cement plaster in single coat on 769.00 Sqmt 182.64

Rough (Similar) side of single or half brick walls for

interior plastering upto floor two level and finished even

and smooth in (i) Cement mortar 1:3 (1-cement:3-sand)

with (1x1)cm Grooves at juuction of structural member

etc. complete. Ground Floor

39 Providing 15mm thick cement plaster in single coat on 334.00 Sqmt 182.64

Rough (Similar) side of single or half brick walls for

interior plastering upto floor two level and finished even

and smooth in (i) Cement mortar 1:3 (1-cement:3-sand)

with (1x1)cm Grooves at juuction of structural member

etc. complete. First Floor

Item Rate In

Description of Item Quantity Unit Amount

No figures

40 Providing 15mm thick cement plaster in single coat on 81.00 Sqmt 206.03

Rough (Similar) side of single or half brick walls for

interior plastering upto floor two level and finished even

and smooth in (i) Cement mortar 1:3 (1-cement:3-sand)

with (1x1)cm Grooves at juuction of structural member

etc. complete.All Floor Second Floor

41 Providing 10 mm. Thick cement plaster in single coat for 275.00 Sqmt 140.95

plastering on ceiling and soffits of stairs and finished

even and smooth in : (I) Cement mortar 1:4 (1 cement :

4 sand) with (1x1)cm Grooves at juuction of structural

member etc. complete. Ground Floor

42 Providing 10 mm. Thick cement plaster in single coat for 161.00 Sqmt 140.95

plastering on ceiling and soffits of stairs and finished

even and smooth in : (I) Cement mortar 1:4 (1 cement :

4 sand) with (1x1)cm Grooves at juuction of structural

member etc. complete.First Floor

43 20mm thick double coat sand faced cement gutka plaster 1965.00 Sqmt 312.80

on walls upto height 10 metres above ground level

consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1

(1-cement : 1-sand) including 1cm x 1cm grooves etc.

complete. and as per pattern sample aprroved by the

architect or directed engineer in-charge

44 Providing throating or plaster drip and moulding to 70.00 Rmt 42.17

R.C.C. Chhajja.

45 Applying two coats of Acrylic lapy (putty) & two coats of 1512.00 Sqmt 40.59

primer of approved brand and manufacture on new wall

surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and

other foreign matter and sand papered smooth.

46 Wall painting (two coats) with plastic emulsion paint of 1078.00 Sqmt 80.35

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly

brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

47 Painting (two coats) with plastic emulsion paint of 434.00 Sqmt 85.76

approved brand and manufacture on undecorated ceiling

surface to give an even shade including throughly

brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

Item Rate In

Description of Item Quantity Unit Amount

No figures

48 Finishing wall with Weather proof exterior 100% acrylic 1963.00 Sqmt 114.53

emulsion paint With one coat of primer on wall

surface(two coat) to give an required shape even shade

after thoroughly brushing the surface to remove all dirt,

and remains of loose powdered materials.etc complete

for All floor

49 Providing And filling with good quality cinder (steam 7.00 Cumt 959.20

coal) as directed by engineer in charge in sunks in layers

of 15 cm thick,including watering,placing ,ramming well

etc as directed, for all floor.

50 Providing Water proofing Treatment on Sunk Slab 45.00 Sqmt 340.88

including cement concrete flooring 1:2:4 (1-cement : 2-

coarse sand : 4-graded stone aggregate 20mm nominal

size) laid in one layer and finished with a floating coat of

neat cement average 50mm thick to Prepare slope

including water proofing chemical etc. Complete for

Sunk Slab All Floor.

51 Providing and laying water proofing treatment with 282.00 Sqmt 1099.89

china mosaic tiles flooring over avg 50 mm C.C. 1:2:4

bedding for maintaining slope for plain and curve

surface & 12 mm to 20 mm of broken piece not more

than 2.5CM of ceramic / glazed tiles ( one for more

colour as directed ) to be laid over cement mortar

bedding of C M 1:3 (1 cement : 3 sand ) contain water

proofing materials per bag of cement useas specified by

manufactured and slops to be tempered to bring mortar

up to surface with using white cement and colour

pigment including rounding of junctions and extending

them up to 15 cm along the wall and curing with bends

any patens or design as per drawing and cleaning by

using oxalic acid etc. complete.

52 Providing and laying cement concrete flooring 1:2:4 (1- 21.00 Sqmt 322.93

cement : 2-coarse sand : 4-graded stone aggregate 20mm

nominal size) laid in one layer and finished with a

floating coat of neat cement. (B) 50mm thick.

Item Rate In

Description of Item Quantity Unit Amount

No figures

53 Providing Plinth Protection to Building including 77.00 Sqmt 2250.38

excavation in ordinary soil and laying cement concrete

1:3:6 using stone aggregates of 40mm nominal size in

foundation layer 100 mm thick below pre-cast Rubber

Dye inter locking concrete block 60mm thick with grade

of concrete M30 pnumatic compressed by mechanically

pressed and as per approved design confirming to IS

15658: 2006 including 35mm Sand layer for levelling

and filling the joint with sand in proper line and level as

per guidelines of IRC SP 63-2018 etc complete., Including

Providing and fixing pre-cast concrete kerb stone of grey

cement based concrete block 30cm length, 30cm height

and 15cm thick of M250 grade concrete as per approved

design and including excavation for fixing in proper line

and level, filling the joint with C:M 1:3 (1cement:3 fine

sand) etc. complete.

54 Providing and fixing a fixed window made of standard 7.50 Sqmt 1960.81

extruded color-anodized aluminum sections, equivalent

to frame-bottom with gutter - 20128 and frame top &

side - 20147. The window shall be fitted with 5mm thick

transparent tinted float glass, secured with rubber

gaskets, and all joints shall be sealed with transparent

silicone sealant for a seamless finish. The work includes

aluminum powder-coated fixtures, necessary

accessories, and all required materials, labor, and

hardware to complete the installation as per the

directions of the Engineer-in-Charge.

55 Providing and fixing a three-track sliding window made 2.00 Sqmt 4421.88

of standard extruded color-anodized aluminum sections,

equivalent to Series C (20 mm), with section numbers:

shutter top - 20530, shutter bottom - 20529, shutter

interlock - 20531, shutter side (handle) - 20544, frame

bottom with gutter - 21651, and frame top & side -

21650. The window shall be fitted with 5mm thick

transparent tinted float glass in each shutter, secured

with rubber gaskets, air lock strips, and finished with

silicone sealant for airtight installation. The window will

include standard extruded color-anodized aluminum-

coated fittings as per design, ensuring durability and

smooth operation. The scope includes all materials,

labor, and necessary hardware for complete installation

as per the directions of the Engineer-in-Charge

Item Rate In

Description of Item Quantity Unit Amount

No figures

56 Providing and fixing two track Sliding window having 41.00 Sqmt 4723.77

standard extruded colour anodized aluminum section

equivalent to jindal series C (30 mm) section numbers

are : shutter top/side 21675 , bottom- 20772, shutter

inter lock - 20550, frame-bottom with gutter-

frame top & side – 20877 with 5 mm thick transparent

tinted float glass in shutter as well as fix glass top of

window & Providing and fixing Nylon Mosquito net with

stitching on wall as per window size, with rubber gasket,

air lock strip and finishing joints with silicon sealant,

with standard extruded colour anodized aluminum

coated fittings as per details etc complete.

57 Providing & Fixing in position standard extruded 3.00 Sqmt 2610.85

approved colour anodized Aluminum Ventilator Size as

per design with outer frame 63.50 x 38.10 x 1.95 mm

with 5 mm thick bajari figured adjustable glass louvers

as shown in elevation for as per detailed drawing as

directed. For Ventilator

58 Providing and fixing Anodized Aluminium Door Having 4.50 Sqmt 3937.99

Side Hung Double Shutter Having Factory Fabricated Std.

Extruded Alluminium Color Anodized Hollow Section

made of Non teak wood frame inside the aluminium

section With 35mm Thick Flush Door With Both Side Pre

laminated with Alluminium "U" Type Beading With Fix

Glazing Above including with both side 15cm long

stainless steel handle and necessary fixtures & fastenings

etc. directed by engineer in charge.

59 Providing and fixing Single shuttered door having 6.50 Sqmt 3549.14

Wooden frame with , fixed by zinc coated hinges with

single shutter of factory made & stamped I.S 2202 grade

one, type one 35 mm thick solid core, melamine faced,

three layered resin, flushed door , having decorative

lamination on both sides & 12 mm thick teak wood

beading fixed around the door, Durable Grip shall be

providing with both side 15cm long stainless steel

handle and necessary Locking system, S.S. fixtures &

fastenings etc. directed by engineer in charge.

Item Rate In

Description of Item Quantity Unit Amount

No figures

60 Providing and fixing 38 mm thick flush Single/Double 9.00 Sqmt 4717.71

door shutter, solid core with Anodized Aluminium

section (jindal door section no 19552-weight not less

than 1.1 kg/mt ) frame size 63.5mm x 38mm inserted

Non teak wood frame inside the aluminium section for

durable grip of hinges & Double shutter with required

teakwood batten having 1mm thick lamination on both

side, Durable Grip shall be providing with both side

15cm long stainless steel handle and necessary Locking

system of Godrej, ,fixtures & fastenings etc. directed by

engineer in charge.

61 Providing and fixing FRP frame size 125x65 mm and 8.00 Sqmt 2019.98

35mm thick FRP shutter with wood grain raised

panneled design finish shutter having extra

reinforcement on sides & edges in Gel coat finish. The

core of the shutter & frame is to be filed up with injected

polyurethene foam done in situ alongwith embedded

wooden pieces for stiffening & also taking hinges &

fintures. The whole FRP frame & shutter is to be water

proof weather proof, termite proof & resistance to mild

acid/alkali. Rates are to be inclusive of S.S hinges with

fastener sleeve & alluminium fixtures & fastenings.

62 P & L 24" x 24" soluble salt vitrified 8 mm thick tile 191.00 Sqmt 1560.45

flooring over 20 mm (average) base of cement mortar

1:6 ( 1 cement: 6 coarse sand) on new surface or fixing

on existing flooring by adhesive material including

dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing &

cleaning the surface etc. complete (tack 10% DARK

63 P & L 24" x 24" vitrified 8 mm thick tile skirting over 12 9.90 Sqmt 1223.11

mm (average) base of cement mortar 1:3 ( 1 cement:

coarse sand) on new surface or fixing on existing flooring

by adhesive material including dismentaling of existing

flooring and jointed with color cement slurry including

finised with flush pointing & cleaning the surface etc.

complete (tack 10% DARK shade)

64 Providing and laying machine cut free edge machine 34.00 Sqmt 1082.72

polished Green Marble finished treads and risers in Max

270 cm length with 1cm projecting, nozing rounded

moulding in tread laid over 12 mm (av.) thick bases of

cement mortar 1:6 (1-cement : 6-coarse sand) jointed

with grey or colour cement slurry including rubbing and

polishing incl. making Three No.s of grooves of size

3mm X 3mm along the length of treads etc. complete

Item Rate In

Description of Item Quantity Unit Amount

No figures

65 Providing and laying 60x45 Machine cut Machine 123.00 Sqmt 1029.22

polished Blue Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-

coarse sand) or L.M. 1.1.5 laid over and jointed with grey

cement slurry including rubbing and polishing etc.

complete. (B) 30 mm thick

66 Providing and laying polished kota stone slab 25mm 4.50 Sqmt 1089.67

thick in risers of steps,skirting Dedo and pillars laid on

10mm thick cement mortar 1:3 (1-Cement : 3 coarse

sand) and jointed with gray cement slury mixed with

pigment to match the shade of slab including rubbing

and polishing etc. complete.

67 Providing and laying Porcelene tiles 60 x 60 cm size 6 6.00 Sqmt 1270.58

mm thick in flooring treads of steps and landing laid on a

bed of 12 mm thick cement mortar 1:3(1-cement:3-

coarse sand)finishing with flush pointing in white

cement etc. completed

68 Providing and laying antiskid ceramic tiles 30 x 30 cm 76.00 Sqmt 970.07

size 6 mm thick in flooring treads of steps and landing

laid on a bed of 12 mm thick cement mortar 1:3(1-

cement:3-coarse sand)finishing with flush pointing in

white cement

69 Providing and laying primium printed glazed tiles tiles 164.00 Sqmt 1441.22

size 30 x 60 cm 8 mm thick in skirting risers of steps and

dedo on 10 mm thick cement plaster 1:3 (1-

cement:3coarse sand) and jointed with colour cement

slurry etc completed.

70 Providing and laying 10 to 12mm thick ready made Full 23.00 Sqmt 2600.75

body vitrified anti skid Flutes step tiles of 120x30cm

Tread, 120x15cm riser & 60x60cm Landing with 1cm

projecting, nosing half rounded moulding in tread , laid

over 12 mm (av.) thick bases of cement mortar 1:3 (1-

cement : 3-coarse sand) jointed with grey or colour

cement slurry including rubbing and polishing incl. Full

body vitrified tiles approved by directed engineer in

71 Providing and fixing mirror polished 16mm to 18mm 78.00 Sqmt 2004.85

thick Marble stone with full round edge and polished of

approved quality in clading on sill and around the doors/

windows/ ventilation with 12 mm thick cement mortor

CM (1:4) and fixing with cement slurry & adhesive

including moulding of exposed edges as directed by

engineering in charge etc. complete.

Item Rate In

Description of Item Quantity Unit Amount

No figures

72 Providing and fixing pre-cast Rubber Dye inter locking 534.00 Sqmt 686.90

concrete block 60mm thick with grade of concrete M30

pnumatic compressed by mechanically pressed and as

per approved design confirming to IS 15658:

including 35mm Sand layer for levelling and filling the

joint with sand in proper line and level as per guidelines

of IRC SP 63-2018 etc complete.

73 Providinfg and fixing Safty grills of required pattern for 1471.00 Kg 99.99

windows/ Door using necessary 16x16 mm M.S. Square

bar, M.S flats and other structural steel at required

spacing including cutting, welding and fabriction etc.

including one coat of primer of approved quality and two

coats of oil painting as per detail drawing etc complete.

74 Providing erecting and fixing double coated Syntex PVC. 5000.00 Litre 3.95

(ISI) water tank of required capacity each with all

necessary fittings and connection etc. complete on

75 Providing laying and jointing in true line and level 50mm 58.00 Rmt 195.67

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two

metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost

of all materials.

76 Providing laying and jointing in true line and level 40mm 50.00 Rmt 148.12

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two

metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost

of all materials.

77 Providing laying and jointing in true line and level 25mm 40.00 Rmt 91.84

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two

metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost

of all materials.

78 Providing laying and jointing in true line and level 15mm 60.00 Rmt 72.65

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two

metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost

of all materials.

Item Rate In

Description of Item Quantity Unit Amount

No figures

79 Providing, laying and jointing in true line and level 160 20.00 Rmt 831.22

diametre U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall

be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size

mm diametre x 210 mm length x 196 mm heigh at every

2000 mm center to center or shall be concealed in walls

as directed including necessary fittings such as bends,

shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost of all

materials.

80 Providing, laying and jointing in true line and level 110 140.00 Rmt 836.73

diametre U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall

be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size

mm diametre x 149 mm length x 145 mm heigh at every

2000 mm center to center or shall be concealed in walls

as directed including necessary fittings such as bends,

shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost of all

materials.

81 Providing, laying and jointing in true line and level 75 20.00 Rmt 293.91

mm dia. UPVC SWRType B pipe conforming to IS 13592-

1992 with one end plain and other end socketed with

rubbering and fitting conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall

be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp at every

mm c/c or shall be conceled in walss as directed

including necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all materials.

82 Providing and fixing in PVC SWR cowel went 75mm dia 4.00 No 16.16

to pipes.(B) 75mm dia.

83 Providing and fixing in PVC SWR cowel went 110mm dia 6.00 No 29.29

to pipes.(B) 110mm dia.

84 Providing and fixing PVC SWR Nahni trap IS 14735 for 10.00 No 571.08

drain - 100 mm diameter with jali of the following

nominal diameter of self cleansing design with C.I scread

down or hinged grating including the cost of cutting and

making good the walls.

Item Rate In

Description of Item Quantity Unit Amount

No figures

85 Providing and fixing brass screw down stop tap.(A) 8.00 No 205.83

86 Providing and fixing ball cock of approved. quality as 1.00 No 132.89

directed.(A) Copper Metal (ii) 50mm dia.

87 Providing and fixing washbasin with single hole for pillar 4.00 No 1653.11

tap with C.I. or M.S. brackets painted white including

Rubber plug, sutting holes and making good the same but

excluding fittings and also including rate of C.P. brass

waste for washbasin or sink (A) 32mm dia. and M.I.

fisher union for washbasin or sink. (A) 32mm dia.; (A)

Vitreous China:(ii) Flat Back washbasin 550 mm x v

400mm size. (i) In white colour.

88 Providing and fixing 600mm x 450mm bevelled edge 4.00 No 833.74

mirrror of superior glass mounted on 6mm thick A.C.

sheet or plywood sheet and fixing to wooden pluge with

C.P. brass screws and washers.

89 Providing and fixing C.P. brass towel rail comlete with 4.00 No 603.19

C.P. brass brackets fixed to wooden plugs with C.P. brass

scews (B) 600mm x 20mm size.

90 Providing and fixing screw down bib taps of following 5.00 No 186.83

size.(A) Brass screw down bib tap polished bright. (i)

91 Providing and fixing pillar tap, capstan head, screw down 4.00 No 308.73

high pressure with screws, shanks and back nuts. (i)

92 Providing and fixing chromium plated brass half trun 4.00 No 254.78

flush cock of approved quality including fixing in pipe

line etc. complete (ii) 25mm dia.

93 Providing laying (to level or slopes) and jointing 292.00 Rmt 665.48

reinforced concrete Light duty non-pressure pipes I.S.

class NP2 of the following internal diameter with collars

and butt ends prepared for collar joints including testing

of joints complete. (D)

94 Providing and fixing S.W. gully trap with C.I. grating brick 4.00 No 1246.92

masonry chamber and water tight C.I. cover with frame

of 300mm x 300mm size (inside) with standard weight

(i) Square mouth traps (B) 150mm x 100mm size P or R

Item Rate In

Description of Item Quantity Unit Amount

No figures

95 Constructing brick masonry chamber for underground 10.00 No 3223.92

C.I. Inspection chamber and bends with briocks having

croshing strength not less than 35Kg. Cm2 in C.M. 1:5

precast RCC cover 455mm x 610mm intenal dimensions

with frame (R.C.C. top slabe with 1:2:4 mix (1-cement :2-

coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick

with cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc.

complete (i) Inside dimensions 455mmx 610mm and

450mm deep for single pipe line.

96 Constructing brick masonry chamber for underground 16.00 No 3933.95

C.I. Inspection C.I. Inspection chamber and bends with

briocks having croshing strength not less than 35Kg.

Cm2 in C.M. 1:5 precast RCC cover 500mmx 700mm

intenal dimensions with frame (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside

plaster 15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls and

bed concrete etc. complete (i) Inside dimensions

500mmx 700mm and 450mm deep for single pipe line.

97 Constructing brick masonry chamber for underground 4.00 Each 242.39

C.I. Inspection chamber and bends with briocks having

croshing strength not less than 35Kg. Cm2 in C.M. 1:5

precast RCC cover 455mm x 610mm intenal dimensions

with frame (R.C.C. top slabe with 1:2:4 mix (1-cement :2-

coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick

with cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc.

complete (i) Inside dimensions 455mmx 610mm and

450mm deep for single pipe line.

Extra over items for every additional depth of 0.1M. of

part thereof beyond 450mm depth for Brick masonry

chamber.(i) for 455mm x 610mm size.

Item Rate In

Description of Item Quantity Unit Amount

No figures

98 Constructing brick masonry chamber for underground 4.00 Each 264.86

C.I. Inspection C.I. Inspection chamber and bends with

briocks having croshing strength not less than 35Kg.

Cm2 in C.M. 1:5 precast RCC cover 500mmx 700mm

intenal dimensions with frame (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside

plaster 15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls and

bed concrete etc. complete (i) Inside dimensions

500mmx 700mm and 450mm deep for single pipe line.

Extra over items for every additional depth of 0.1M. of

part thereof beyond 450mm depth for Brick masonry

chamber.(i) for 500mm x 700mm size.

99 Providing and fixing GI Ladder of required pattern with 300.00 Kg 109.08

GI flats(30x3mm) or round or square bars (12mm) at

required spacing & with round headed bolts and nuts or

screws or welding including primer coat of approved

quality and two coats of oil paintas as directed by

engineer in charge

100 Providing and fixing wash down water closet (European 3.00 Sqmt 3890.52

type W C pan) with integral P and S trap including

jointing the trap with soil pipe in cement mortar 1:1 (1

cement five sand) including providing and fixing plastic

seat cover for wash down WC with CP brass hinges and

rubber buffers back plastic seat with a pair of C I or MS

bracket with complete fitting such as lead valve siphon

15 mm dia brass ball valve with polythene float CP brass

handle unions and couplings for connection with inlet

out let and over flow pipes 40 mm dia porcelain

enameled flush bend including cutting holes in walls and

making good the same connection the flush bend with

cistern and closet vitreous china.

101 Providing and fixing Urinal of approved quality including 2.00 Nos 1550.99

connection with trap and with integral longitudinal flush

pipe.(A) Squating plate pattern white earthenware

102 Providing and fixing 25 mm thick polished kota stone 1.00 Sqmt 667.61

Shalve with full round edge and double side polished of

any required and fixing with cement slurry & adhesive

including both exposed edges cut and Smooth Finished

as directed by engineering in charge etc. complete.

Item Rate In

Description of Item Quantity Unit Amount

No figures

103 Providing and fixing frosted finished 600mm x 1200mm 2.00 Sqmt 6008.49

glass urinal partition with crystalline Dhar polish on

exposed edges, supported by SS legs and fitting bracket

clamp with cut holes and silicon grouting, including all

accessories and labor charges directed by the

engineering in charge, etc. complete

104 Providing and fixing in position 300 mm high, 150 mm 25.00 No 707.00

wide English letters made from 1.0 mm thick stainless

steel sheet as directed by Engineer in charge with all

necessary tools & plants etc. complete.

105 Providing and fixing in position 150 mm high, English 20.00 No 404.00

letters made from 1.0 mm thick stainless steel sheet as

directed by Engineer in charge with all necessary tools &

plants etc. complete.

106 Providing and fixing MS Z clamp on Wall or celling for 60.00 No 85.85

Pipe Fitting including all type necessary fittings and

accessory etc. completed as per directed engineer in

107 Providing and Fixing a set of wall mounted 38 mm dia U 2.00 No 2671.45

shaped horizontal stainless steel collapsible grab bar

38mm vertical stainless steel fixed grab rail of grade SS

304 from round pipe supported and 75 mm dia 8 mm

thick SS 304 base flange on wall including anchor

fasteners, nuts, accessories as per detailed drawing etc.

complete as directed by Architect or Engineer in charge.

108 Providing and fixing coloured self adhesive PU-Tactile 33.00 Sqmt 4586.41

tile, ground surface indicators of Polyurethane) of size

300mm x 300mm for guiding/warning to the visually

visitors in the centre/side of the pedestrian/approach

pathway as per specification and guidelines complete in

all respect to the entire satisfaction of in charge.

Item Rate In

Description of Item Quantity Unit Amount

No figures

109 Providing and fixing acrylic multilingual Braille (raised 4.00 No 1696.80

dots) DIRECTIONAL SIGNBOARDS of size 225 x 150mm

designed as per accessibility standards and having

3.5mm thick acrylic base plate with Upper Case San Serif

words made of white acrylic non glare cut out letters of

height 15mm raised not less than 0.8mm above base

plate and the equivalent word written in Hindi with

Devanagari non glare acrylic letters of height 15mm

raised not less than 0.8mm above base plate and having

a non-glare acrylic cut arrow pointing in the required

direction. Each signboard to be fixed as per

manufacturers specifications on the wall at the approved

location and at a height of 1200mm from FFL complete

as per design / specifications and guidelines as per the

entire satisfaction of the Engineer-in-charge

110 Providing and fixing of acrylic, non-glare, tactile audio 1.00 No 43480.50

pictorial building layout as per the approved size, design

and make, having 3mm thick acrylic non glare base plate

of the approved colour and non-glare acrylic cut out

symbols raised 3mm above base plate and Grade 2/

Grade 1 Braille to be integral with the sign face and be

raised 0.5mm above base plate. The map to be installed

at the specified location as per accessibility standards,

shall be oriented to the position of the viewer and to be

installed at a height of 800 mm from the finished

ground/ floor level and using the necessary hardware

specified by the manufacturer and to be installed up to

the height of 800 mm from the finished ground/ floor

level and using the necessary hardware specified by the

manufacturer and to be installed complete as per

design/specifications and guidelines as per the entire

satisfaction of the the Engineer-in-charge

111 Providing & Fixing Braile Indicator Of Size 170 Mm X 10.00 Rmt 820.12

35mm For Handrails Of The Approved Design And Make

Have Braile Dots Raised 0.5 Mm Above Base Plate To Be

Installed At Specific Locations As Per Direction Of

Engineer In Charge

112 Providing and fixing of conspectus tape 50mm width on 16.00 Rmt 1310.98

of treads in staircase including cutting pasting etc. As per

harmonised guidelines complete in all respect to the

entire satisfaction of engineer in charge.

Item Rate In

Description of Item Quantity Unit Amount

No figures

113 Providing and Fixing 15 mm thick 300 mm x 300 mm 33.00 Sqmt 1207.96

Tactile Warning Tiles (Attention Tiles i.e. Tactile

Warning Surface Indicator {TWSI}) of Johnsan Endura

Tac Button Yellow Plus or equvqlent make in flooring

laid on 20 mm thick cement mortar 1:6 (1 cement :

coarse sand) on new surface and jointed with cement

slurry including finished with flush pointing & cleaning

the surface for all floors as per detailed drawing etc.

complete as directed by Architect or Engineer in charge.

Thse tiles shall be Anti Skid, Chemical Resistant, Fade

Proof, Frost - Heat & Weather Proof, High Flexural

Strength, Highly Durable, Stain Resistance . All Tactile

Warning Tiles meet the specific size and dimension

standards as required by ISO/FDIS

114 Providing & Fixing 114mm wide G.I. Sheets lovers having 35.00 Sqmt 4537.93

weight not less than 490 Gm/m roll formed to create

84mm wide louver snap fixed on special shaped GI

channel. Fix louvers & channels shall finished with

powder coating of 55 micron (1) 0.55mm thick sheet.etc.

complet as per detail drawing as directed.

Item Rate In

Description of Item Quantity Unit Amount

No figures

115 Providing and fixing eco-friendly light weight 52.00 Sqmt 1648.96

calciumsilicate false ceiling tiles having Tegular edge &

15 mmThick Densified edges on the Tile Periphery for

ExtraStrength The Light weight calcium silicate ceiling

tilesshall have , light reflection 85% non-combustible as

perB.S. 476 part IV, 100% humidity resistance and

alsohaving thermal conductivity0.043° w/m KC.for the

bestthermal Insulation . The Light weight calcium

Silicatetile shall be of approved texture Fine

fissured/Spintone/Cosmos having NRC value of 0.5 &

Globehaving NRC value of 0.75 NRC or equivalent of size

595X 595 mm to be laid on true horizontal level

suspendedinter locking metal grid of hot dipped

galvanized steelsections (galvanizing @120 grams per

sqm includingboth side) consisting of main ‘T’ runner

suitably spacedat joints to get required length and size of

24X38mmmade from 0.30 mm thick (minimum) sheet,

1200mmcentre to centre, and cross ‘T’ of size 24X28mm

madeout of 0.33mm (Minimum) sheet spaced 1200mm

alongspaced between main ‘T’ at 600mm centre to centre

toform agrid of 1200X600mm and secondary cross ’T’

oflength 600mm and size 24x28mm made of 0.30 mm

thick(Minimum) sheet to be interlocked at middle of

the1200X600mm panel to form grid of size

600X600mmresting on periphery walls/partitions on a

perimeter wallangle pre-coated steel of size

(24X24X3000mm made of0.40mm thick (minimum)

sheet with the help of rawlplugs at 450mm centre to

centre with 25mm long drywall screws @ 230mm

interval and laying 15mm thickDensified edges light

116 Excavation for foundation for depth from 3.0 m to 5.0 m 209.00 Cumt 642.90

including sorting out and stacking of useful materials

and disposing off the excavated stuff upto 50 Meter

lead.(E) Hard Rock

117 Constructing brick masonry chamber for underground 12.00 No. 7180.44

C.I. Inspection chamber and bends with briocks having

croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x 610mm intenal

dimensions, total weight of cover with frame to be not

less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame

15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2-

coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick

with cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc.

complete.(iii) Inside dimensions 600mm x 850 mm and

450mm deep for pipe lines with three or more inlets.

Item Rate In

Description of Item Quantity Unit Amount

No figures

118 Box cutting the road surface to proper slope and camber 443.63 Cum. 104.04

for making a base for road work including removing the

excavated stuff and depositing on the road side slope as

directed upto 50Mt.lead.

119 Filling in plinth with sand under floors including 102.38 Cum. 532.27

watering ramming, consolidating and dressing complete

for road work

120 Construction of granular sub-base 150 mm thick by 102.38 Cum. 1241.29

providing coarse graded machine crushed B.T. material

satisfying MOST specification of grading I (B.T. stone

aggregate 53 mm to 26.5 mm 35 %, 26.5 to 4.75 mm -

% and 2.36 mm below - 20 % )including spreading in

uniform layer with motor grader on prepared surface,

mixing by mix in place method with rotavator at OMC

and compacting with vibratory roller to achieve the

desired density etc. complete.

121 Providing and laying wet mix macadam base course 250 170.63 Cum. 1262.50

mm thick using machine crushed B.T. chips as per

required gradation mixing with required optimum

quantity of water, conveying the mix to site of work,

spreading in to grade and camber with mechanical paver

and consolidation each layer with vibratory roller

including cost of material labour plant and equipment

etc. complete.

122 Compaction and finishing of cement concrete road by 682.50 Sqm 63.63

trimix M.250 process providing extra Labour charges for

the trimix vacume dewatering service process on cement

concrete road sutface by using vacuum dewatering pump

floater surface vibrator including making groves and

rough finish to surface including leveling etc complete.

123 Providing and Laying homoginious Grey cement based 354.00 Rmt 361.64

concrete kerbing of size 30 cm x 30 cm x 10 cm size as

per detailed drawing having grade of concrete M25

grade, including necessary excavation, BBCC 1:5:10

cm as per ddetailed drawing fixing in line and level,

filling joints in CM 1:3 with smooth finished, white

washing three coats etc. complete as directed by

Engineer in charge.

124 Steel work, welded in built up sections framed work 4620.00 kg 90.48

including cutting, hoisting, fixing in position and

applying a priming coat of read lead paint & two coat oil

paint. (A)In beams and joists, channels angles Tees, flats,

with connecting plates or angle cleats as in main and

cross beams. Hip and jack rafters, purlins conneted to

common rafters and the like..

Item Rate In

Description of Item Quantity Unit Amount

No figures

125 Providing and fixing of Ridge flashing for roof panel shall 174.00 Sqm 858.67

be made out of 0.5 mm thick pre coated GI sheet . The

Precoated sheet shall be of minimum 240 mpa steel

grade confirming to IS 14246:1995 and shall have zinc

coating of minimum 120 gsm as per IS:277:1992 , 5-7

microns epoxy primer on both side of the sheet and

polyester top coat 15-18 micron. The PPGI Sheet shall

have plastic protective guard film of minimum

microns to avoid scratches during transportation. The

ridge shall be fixed to the steel members by pop rivet or

self drilling/self stitching fastners @ maximum 450 mm

c/c along length of capping/flashing etc complete .

126 Providing and fixing to wall ceiling and floor 10.0 Kg. 84.00 Rmt 336.24

F/Cm2 working pressure poluthene pipes of the

following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall clipsetc.

including making good the wall ceiling and floor.(G)110

127 Providing and fixing to wall ceiling and floor 10.0 Kg. 30.00 Rmt 696.90

F/Cm2 working pressure poluthene pipes of the

following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall clipsetc.

including making good the wall ceiling and floor.(G)160

128 Providing junction for rain water juncton chamber of 2.00 No 8981.93

size 0.60x0.60x0.75m with excavation of size 1.96x1.96

m & 0.15m thick c.c.1:2:4 bed concrete including brick

masonary wall in CM 1:6 of 0.75m height & 0.23m thick

with 15mm thick cement plaster inside & outside &

1.06x1.06 RCC (1:2:4) slab of thickness 0.15m with CRS

steel and 0.60mx0.45m cast iron manhole cover with

frame weight not less than 35 kg as per directed by

Engineer-in-charge

129 Providing Filter chamber of Brick work in C:M 1:6 of size 1.00 No 16360.99

2.06mx1.20m x1.20m & excavation dimension of 2.66mx

1.81x1.35m including C.C 1:2:4 bed concrete of 0.15m

thick including brick work in c.m 1:6 for 23cm thick wall

including 15mm thick cement plaster inside & outside

with cement slurry & 10cm thick RCC 1:2:4 top cover

with frame of minimum weight of 35 kg & filling filter

material kapchi in layers (25-40mm & 10-20mm) & BT

metal 40mm & sand as per directed by Engineer-in-

Item Rate In

Description of Item Quantity Unit Amount

No figures

130 Providing Recharging pit of size 2.0m Dia. & 5.0m depth 1.00 No 15223.73

of water logging with excavation filling the pit with

gravel & sand in layers including making 300mm dia

bore depth of 5.0 mt & above concrete with kapchi in

layers (20-40mm & 10-20mm) & BT metal 40mm &

filling brick as directed by Engineer-in-charge.

131 Supplying FIRE bucket round bottom of 9 litres capacity 6.00 No 353.50

made out of 24 gauge G.I Sheet with extra handle at

bottom duly painted white inside and Red out side with

FIRE mark. Filled with dry-sand and kept on existing

stand provided or hung on wall hook.

132 Supplying and erecting floor mounting Stand for keeping 1.00 Rmt 2676.50

four nos. of FIRE buckets comprising 1500 mm in length,

900 mm height frame made out of 30mm x 30 mm x

mm angle iron with cross suports legs, welded with

hooks and duly painted with one coat of red lead and two

coats of approved enamelled silver paint.

133 Supply & Installing of ABC Type - 6 Kg, Capacity Fire 4.00 No 2166.45

Extinguisher as per IS -2171 ISI - mark , with necessary

Fittings etc. complete.

134 Supply, Filling and Fixing of approved make CO2 type 6.00 No 4797.50

fire extinguisher. Capacity 4.5 Kg. (conforming to IS-

135 Design, supply & installation of Safety Signage made of 4.00 sqmt 3282.50

zinc sulphide based glow in the dark rigid sheet with

high luminous property enclosed in a transparent

weather proof U/V stabilized plastic pasted on 3mm

thick clear acrylic sheet such as EXIT, EMERGENCY EXIT,

CASE OF FIRE, FLOOR MARKINGS, FIRE LIFT, STAIRCASE

EXIT or any other Word etc.

136 Providing and laying controlled cement concrete M-200 13.00 Cumt 9112.32

and curing etc. complete including the cost of form work

and excluding the cost of reinforcement etc. complete in

RCC Vertical and horizontal wall for Ground floor

137 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. 1.00 Nos 958.17

size having weight not less than 35Kg.

138 Providing & erecting open well horizontal mono block 1.00 Nos 36107.50

pump set with cast iron body, complete for three phase

submersible motor having [H]For 15 H.P,3 phase open

well horizontal mono block pump set suitable for

LPM to 1025 LPM @ 33 to 42 MTR head suitable for

65/80 mm dia delivery pipe

Item Rate In

Description of Item Quantity Unit Amount

No figures

139 Supplying & erecting approvedmake 3 phase motor 1.00 Nos 19695.00

control cubicalpanel (Star-Delta) made from 16G.CRCA

sheet duty painted with epoxy powder painted inside

and outside with hinged doors and locking arrangement,

consisting suitable size of ON-OFF isolator (AC-

3/23duty) main fuses,single phasing preventer cum

water level, Guard(Compe unit), Toggle switch to by pass

Single phase preventercum WLG,indicating lamps forR-Y-

Bphases, over load relay.Automatic water level

controller, Ammeter &Voltmeter each with two way

Crimped,Panel to be erected on angle iron frame grouted

on wall as overload relay,thermal/Electronics star delta

cutoff timer,start-stop push buttons.The isolator

overload relay &cntractors ofL&T,Siemens or Cuttler

Hamer make only.Panel to be erected on angle iron

frame ground on wall (e)S/D upto 2.5 H.P.

140 Providing and fixing rolling shutters of approved make 5.00 Sqmt 3503.41

made of 80 mm wide M.S laths inter-locked together

through heir entire length and jointed together at the

ends by end locks mounted on specially designed pipe

shaft with bracket plates,guide channels and

arrangement for inside and outside locking with push-

pull operation including the cost of hood cover and sprig

etc.complete(A) Shutters having width below 3.5M

141 Drilling of min. 250 mm dia. bore hole in all strata 155.00 Rmt 1270.58

including dualover burden strata by combination

DR/DTH rig including lowering 200 mm dia MS ERW

pipes in bore hole and testing etc.all work as per directed

engineer incharge.

142 Manufacture, supply and delivery of cage 100.00 Rmt 1682.66

typeTrapezoidal shape ( ' V ') wire wound low carbon,

Galvanized screen pipe and Stainless Steel Screen pipes,

confirming IS: 8110 For (B) 200mm dia 1) 1.00mm Slot

143 Bore plug having 100 mm height made from M.S. plate 1.00 No 1161.62

with 3 holes at equal distance on circumference for nut-

bolts type, locking arrangement with nuts-bolts & lock

nuts of std. Make complete. For 250mm dia

144 Providing PVC insulated flat submersible cable as per 200.00 Rmt 180.79

detailed technical specifications of R/C of GWSSB

conforming to IS 694, IEC 60227 / 60228.d)1 R x 3 C x

Item Rate In

Description of Item Quantity Unit Amount

No figures

145 Suppling and installing 3 Phase Borewell 15.00 HP 1.00 No 37160.93

Submersible Pump Sets Electric motor driven

conforming to I.S. 8034 and motor conforms to IS-9283

working at 3 phase 400/440 volt 50 C/S A.C. supply &

2900 R.P.M. cat

146 Providing and fixing check or non return pully wheel 2.00 No 1111.00

valve of 50 mm diameter.

147 Providing and fixing to wall,ceiliing and floor galvanised 150.00 Rmt 787.40

mild steel tubes ( Medium grade ) of the following

nominal bore, tube, fittings and clamps included making

good the wall, ceilling and floor (F) 50 mm

148 Supplying and lowering ISI-mark edunplasticized PVC 40.00 Rmt 393.90

(uPVC) casing pipe,200 mm outer diameter,as per

150 Geohydrological ground water investigation including 1.00 Nos 14428.86

vehicle charges for three phase DTH bore/DR tube well

including water sample testing & chemical analysis

151 Providing and laying controlled cement concrete M-250 207.00 Cumt 6087.27

and curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced

concrete work in Retaning wall

152 Providing and filter media 600mm thick as directed at 69.00 Sqmt 1248.74

the back of Protection Wall as per detailed specification.

153 Providing and fixing concertina coil fencing with 115.00 Rmt 590.85

punched tape concertina coil 600 mm dia 10 mt

openable length having 24 no rounds per 6 mt length,

upto 3mt height of wall with existing angle iron (50mm

x50mm x5mm )requird shaped As per Directed

Engeenier in charge. placed 2.4mt or 3.00mt apart and

with 4 horizontal R.B.T. reinforced barbed wire(3 mm)

stud tied with G.I. staples and G.I. clips to retain

horizontal, including necessary bolts or G.I.barbed wire

tied to angle iron, all complete as per direction of

Engineer-in-charge, with reinforced barbed tape

(R.B.T.)/Spring core (2.5 mm thick) and weight

gm/meter at compound wall for ESR M4/ intakewell.

Item Rate In

Description of Item Quantity Unit Amount

No figures

154 Providing and fixing decorative entrance gate made out 750.00 Kg 179.78

of cast iron and various mild steel tabular section

combination , the Ornamental entrance gate should be

fixed at compound wall including pattern and die making

, cutting , welding , grinding, fabrication , fixing in

position at compound wall with necessary pedestal,

bearing block and other locking arrangement. The

entrance gate should be painted with two coats of

priming coat of paint, and two coat of oil paint etc

complete. As per detail design and instruction of

architect.

155 Earth work for Embankment including breaking 3426.00 Cum 161.22

clods,dress ing,with all lead and lift.( excluding watering

and consolidation)(E) From borrow pits within 3 km

156 Rolling of Earth work in layers with power roller 3426.00 Cum 22.63

including filling in depressions which occure during the

157 Point wiring for Light / Bell with 2-1.5 sq.mm & earth 68.00 Pt. 485.81

wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires up

to 10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed. (f) with medium class Rigid

PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III

158 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 23.00 Pt. 674.68

1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade

FRLS PVC insulated multi strand copper wires up to

mtr length, in below type of pipe erected with 6A

Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with

earth continuity of following type erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose / H.D.Connector as

directed. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete

Item Rate In

Description of Item Quantity Unit Amount

No figures

159 Point wiring for on board Looped Plug with 6A Modular 20.00 Pt. 257.55

type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected on / in wall / ceiling with following

type accessories Cat. III

160 Providing following type of Modular Type Accessories 5.00 Ea. 151.50

mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured /

metallic/white front plate , modules erected with

necessary connections as per site situation directed by

Engineer In charge. (1)One No. SP 6 Amp. Cat.III

161 Providing following type of Modular Type Accessories 5.00 Ea. 151.50

mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured /

metallic/white front plate , modules erected with

necessary connections as per site situation directed by

Engineer In charge. (2) One No 5 pin plug Cat.III

162 Providing following type of Modular Type Accessories 5.00 Ea. 160.59

mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured /

metallic/white front plate , modules erected with

necessary connections as per site situation directed by

Engineer In charge. (3) Two Pin/RJ-11 Telephone

Socket. [A] For One Gang Cat.III

163 Providing following type of Modular Type Accessories 24.00 Ea. 25.25

mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured /

metallic/white front plate , modules erected with

necessary connections as per site situation directed by

Engineer In charge. (7) Blank Plate Single Cat.III

164 Providing following type of Modular Type Accessories 17.00 Ea. 160.59

mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured /

metallic/white front plate , modules erected with

necessary connections as per site situation directed by

Engineer In charge. (8) Computer RJ-45 socket Cat.III

165 Providing following type of Modular Type Accessories 4.00 Ea. 180.79

mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured /

metallic/white front plate , modules erected with

necessary connections as per site situation directed by

Engineer In charge. (9) 16 Amp. SP one way switch

Item Rate In

Description of Item Quantity Unit Amount

No figures

166 Providing following type of Modular Type Accessories 3.00 Ea. 199.98

mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured /

metallic/white front plate , modules erected with

necessary connections as per site situation directed by

Engineer In charge. (10) 6/16Amp. Universal socket

167 Providing following type of Modular Type Accessories 1.00 Ea. 410.06

mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured /

metallic/white front plate , modules erected with

necessary connections as per site situation directed by

Engineer In charge. (14) 16A Double Pole Modular MCB

Switch Cat.III

168 Providing and erecting ISI mark Medium class RIGID PVC 325.00 Mtr. 24.24

PIPES of following size complete to be erected on/in wall

or ceiling erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & Clamps with

following dia of pipes, in approved manner as directed

169 Supplying and laying UPVC cable trunking system 10.00 Mtr. 277.75

comprising unplasticised polyvinyl, chloride rigid

material with ignition free and flame proof confirming

BS with necessary end caps Internal and external bend,

flat bends, coupler, tee etc..All necessary accessories and

measuring of following sizes (1) 75 mm x 50 mm

170 Providing and fixing approved make Perforated C type 20.00 Rmt. 622.16

cable tray. Made from sheet steel. The cable tray should

be single or double bended as per required and as per IS

2062/1079 and shall be coated with hot dip galvanizing

as per IS 2629/4759. with max 17.5% perforation with

coupler plate / Fish plate and GI hardware like nut - bolt

and washers etc. erection with necessary support(

included) as per Specification and as per instruction of

engineer in charge..(5) 300 X 50 X 2.0 mm Thick

171 Providing and erecting Mains with 1.1 KV grade FRLS 828.00 Mtr. 82.82

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size (A) With

medium class Rigid PVC pipe and accessories (b) 2 wire

Item Rate In

Description of Item Quantity Unit Amount

No figures

172 providing and erecting Mains with 1.1 KV grade FRLS 25.00 Mtr. 112.11

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected in / on wall /

ceiling with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth

continuity of following size (A) with medium class Rigid

PVC pipe and accessories (a) 2 wire 4 sq. mm

173 providing and erecting Mains with 1.1 KV grade FRLS 30.00 Mtr. 147.46

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected in / on wall /

ceiling with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth

continuity of following size (A) with medium class Rigid

PVC pipe and accessories (b) 2 wire 6 sq. mm

174 providing and erecting Mains with 1.1 KV grade 30.00 Mtr. 260.58

FRLSPVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected in

/ on wall / ceiling with 2.5 sq. mm copper conductor

FRLS PVC insulated stranded wire of green colour for

earth continuity of following size (A) with medium class

Rigid PVC pipe and accessories (h) 4 wire 6 sq. mm

175 providing and erecting Mains with ISI marked, 1.5KV 46.00 Mtr. 56.56

grade electrolyte multi stranded, annealed copper

conductor with heat resistant PVC insulated conforms to

IS 694, IEC - 227 erected in existing pipe of following

size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with

required size of copper lugs, nuts and bolts if required.

(e) One wire 6.00 sq. mm

176 providing and erecting Mains with ISI marked, 1.5KV 12.00 Mtr. 236.34

grade electrolyte multi stranded, annealed copper

conductor with heat resistant PVC insulated conforms to

IS 694, IEC - 227 erected in existing pipe of following

size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with

required size of copper lugs, nuts and bolts if required

(h) One wire 25.00 sq. mm

177 Supplying and erecting Flexible PVC insulated multi 54.00 Mtr. 46.46

strand multi core 1.1 kv grade ISI marked copper wires

of following size to be erected as directed. (e)

Sq.mm 3 core round PVC sheathed

Item Rate In

Description of Item Quantity Unit Amount

No figures

178 Supplying & erecting approved make Telephone Cable 20.00 Mtr. 199.98

electrolytic copper conductor PE insulation twisted in

two pairs, & wrapped with FRLS PVC tape & sheathed

with FRLS PVC or HFFR outer Jacket suitable for

telephone wiring & confirming to C-DOT erected in

existing pipe. of following size of conductors & nos.of

pairs. With necessary connections. (b) Armoured [Jelly

Filled] (2) Twenty Pairs

179 Supplying & erecting approved make LAN cable of 660.00 Mtr 76.76

following size in existing pipe as per direction [D] CAT -

180 Providing & erecting main Distribution (MDF) indoor 1.00 Ea. 1368.55

type, back mounted frame as per DoT standard approved

with krone strips (b) Suitable for 20 pair

181 Providing & erecting Switch board for Computer or 17.00 Ea. 1133.22

electric apparatus consisting of following modular type

accessories mounted with PVC / Metallic

concealed/open box with single mounting base frame

covered with textured/metallic /white front

plate,modules erected with necessary connections as

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories Cat.

182 Decorative call bell Ting-tong box type 250 volts 2.00 Ea. 71.71

complete erected

183 Supplying and erecting LED indoor fittings with LEDs of 46.00 Ea. 535.30

wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than 0.95,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage

any wattage capacity between the ranges shown.) (A)

Tube Light with integral driver (v) 36-40 Watts, Surge-2

KV, IP-20, conventional 4 feet Cat-lll

Item Rate In

Description of Item Quantity Unit Amount

No figures

184 Supplying and erecting LED indoor fittings with LEDs of 8.00 Ea. 1794.77

wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated

and high U.V. & corrosion resistance with diffuser

housed in aluminium casted body with company

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage

any wattage capacity between the ranges shown.) (B)

LED Panel Light with provision for Plane front frame

with translucent cover fixed to housing complete.IP20

(vi) 36 watts, 24" x 24", Surge- 2KV Cat-lll

185 Supplying and erecting led lamps with following wattage 8.00 Ea. 112.11

capacity of 220 to 240 voltage, minimum 15000 burning

hours life, 500 V in built-surge protection,Polycarbonate

diffuser, mounting suitable for E14 / E27 / B22 lamp

holders, pf >= 0.5 (A) LED Lamps integral type, with PC

diffuser suitable LAMP holder (ii) 5 to 8 watts Cat-III

186 Supplying & erecting approved make low noise 4.00 Ea. 1703.87

decorative exhaust fan having square frame ABS body

with inbuilt lowers & square frame. 200mm with

1350RPM Cat.II

Item Rate In

Description of Item Quantity Unit Amount

No figures

187 Supplying and erecting LED street light / Flood light 9.00 Ea. 4997.48

fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated

and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT

K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of

wattage capacity between the ranges shown.) (A) Street

Light (IP-65), Surge protection -4KV integral and ,Light

must have 440VAC line supply with over-voltage

protection. (ii) above 48 to 60 Watts Cat-lll

188 Supplying and erecting LED street light / Flood light 2.00 Ea. 4819.72

fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated

and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT

K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of

wattage capacity between the ranges shown.) (C) Post

Top Lantern LED fitting comprises of finish cast

aluminum spigot and spun aluminum canopy fixed with

opal polycarbonate, pipe arrangement for vertical

mounting driver and accessories wired upto terminal

block.IP 65(ii)32-40W Cat-lll

189 Providing & erecting Approved make Power Saving 50 23.00 Ea. 1948.29

Watt Ceiling Fan with double ball bearing ISI mark with

Condenser 230 volt A.C. 50 Hz 1200 mm sweep

complete having 3blades with aluminium blades with

canopy & 30 cm. down rod erected with earthing.(Make

shall be approved by Engineer in charge))

Item Rate In

Description of Item Quantity Unit Amount

No figures

190 Supplying and erecting 19 / 20 mm. nominal bore 23.00 Mtr. 108.07

Medium Class M.S. Pipe down rod erected duly painted

for fan complete with proper insulation without leakage

and earthing.

191 Supplying & erecting fan hook box of 10 mm M.S. round 23.00 Ea. 108.07

bar bounded to the RCC bars up to 50mm length each

side and pierced through a 16 Gauge M.S. box / Heavy

Duty PVC box complete erected concealed in Ceiling with

necessary finishing.

192 Providing 2.5mm.thick laminated acrylic sheet to cover 23.00 Ea. 18.18

the fan hook or Fan box.

193 Providing and erecting XLPE(IS:7098)(I)-88 ISI 155.00 Mtr. 378.75

armoured cable multistrand Aluminium conductor for

1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables (D)

1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core)

194 Providing and erecting XLPE (IS:7098)(I)-88 ISI 294.00 Mtr. 126.25

armoured cable multistrand / Solid Aluminium

conductor for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe of following size of

cables (B) 4 core 6 Sq. mm

195 Making trench in soft soil of suitable width of 90 cm deep 345.00 Mtr. 55.55

for laying cable or locating the fault all over the run and

back filling the same and making the surface as normal

196 Providing & laying approved make Double walled 345.00 Mtr. 62.62

corrugated pipes (DWC) of polyethylene(conforming to

IS 14930 II )with necessary connecting accessories of

same material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable (A)50 mm outer dia

197 Providing and, fixing heavy duty flange type brass cable 5.00 Ea. 38.38

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables. (B) 2 to 4 core 6 Sq. mm

198 Providing and, fixing heavy duty flange type brass double 4.00 Ea. 103.02

compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables. (C) 3 &

1/2 core 70 Sq. mm

199 Solder less crimping type Aluminium lugs conforming to 26.00 Ea. 6.06

IS suitable for cable of following size evenly crimped

with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an

approved manner. (A) 6 Sq.mm

Item Rate In

Description of Item Quantity Unit Amount

No figures

200 Solder less crimping type Aluminium lugs conforming to 4.00 Ea. 20.20

IS suitable for cable of following size evenly crimped

with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an

approved manner. (D) 35/50 Sq.mm.

201 Solder less crimping type Aluminium lugs conforming to 12.00 Ea. 25.25

IS suitable for cable of following size evenly crimped

with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an

approved manner. (E) 70 Sq.mm.

202 Providing and erecting Approved make Four pole 3.00 Ea. 6173.12

moulded case circuit breaker having breaking capacity

ICU of 25 KA. at 415 V,having normal current rating up to

25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal

connections, spreader tinned copper & complete erected

in existing 16 G.M.S. housing. ICS=100% of ICU only

203 Providing and erecting Approved make Four pole 2.00 Ea. 8055.76

moulded case circuit breaker having breaking capacity

ICU of 35 KA. at 415 V. having normal current rating

125A. with Fixed thermal & magnetic release suitable to

work on A.C.supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing

16 G.M.S. housing. ICS=100% of ICU only

204 Supplying & erecting approved make Four Pole 415V 1.00 Ea. 7790.13

change over switch interior for panel mounting with

operating mechanism A.C.23 duty confirming to IS for

(C)100-125A Cat-lll

205 Supplying and erecting triple pole & neutral 440V / 500V 1.50 Rn.Mtr 1961.42

panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence

of following current carrying capacity, erected with

necessary bus bar supports /insulators, main cable

socket to each bar, erected in existing cubical panel with

necessary connections. (A) Suitable for 100 Amp.

206 providing and erecting Miniature circuit breaker single 37.00 Ea. 112.11

pole 6A to 25A suitable to operate on 240 V A.C. system

and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark

207 Providing & erecting 240 V MCB double pole switch for 5.00 Ea. 295.93

lighting Load (B Curve) having 10 KA breaking capacity

& confirms to IS : 8828 in existing box having following

capacity (B) 40 Amp. Cat.III

Item Rate In

Description of Item Quantity Unit Amount

No figures

208 providing and erecting Approved make RCCBs 4.00 Ea. 2235.13

conforming to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 10 KA and

suitable for operation on single phase 240 V,50Hz.

having characteristic of quick action & tripping with all

advance feature & do not incorporate any electronic

component. for following Max. rating erected as directed

(ii) 40Amps. DP Cat. III

209 Providing & erecting 415V MCB Four Pole Switch for 8.00 Ea. 638.32

Lighting Load (B curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following

capacity (b)40 Amp. Cat.III

210 Providing & erecting 415 V MCB Four Pole for Motor & 1.00 Ea. 737.30

Inductive Load (C Curve) having 10KA breaking capacity

& confirms to IS :8828 in existing box having following

capacity (c)63 Amp. Cat.III

211 Providing and erecting Sheet Steel powder coated MCB 1.00 Ea. 1492.78

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to

IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of

same company of MCB to be used) suitable for (A) single

phase incoming and horizontal single phase outgoing (b)

sheet steel double door (IP-43) (iv)12 way

212 Providing and erecting Sheet Steel powder coated MCB 1.00 Ea. 2913.85

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to

IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of

same company of MCB to be used) suitable for (B) three

phase incoming and single phase horizontal type

outgoing Per phase isolation type (PPI) (b) sheet steel

double door (ii)6 way

213 Providing and erecting Annealed bare Copper wire 8 to 3.00 Kg. 794.87

214 Providing and erecting HOT deep Galvanised iron strip 10.00 Kg. 77.77

wire 8 to 16 SWG.

215 Providing and erecting Pipe type earthing having 150 5.00 Ea. 368.65

cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

216 For using salt and charcoal / coke as required for pipe 5.00 Ea. 171.70

type earthing.

Item Rate In

Description of Item Quantity Unit Amount

No figures

217 Supplying & erecting earth pit of minimum bore 2.00 Ea. 4591.46

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for

following type of applications with chamber and heavy

duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of

installation duly stamped and signed by agency and

officer Incharge has to ensure the value of earthing

resistane mentioned in test Certificate) & having back

filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 ohm / meter testing as per

IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry

form, Sulphar content:- <2%(C) Back fill Compound :-

Earthing compound should be capable to retain moisture

for long time Necessary test report must be submitted

by Agency. (a) For Electrical Installation up to 440V in

normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Item Rate In

Description of Item Quantity Unit Amount

No figures

218 Providing & erecting weather proof, dust & vermin proof, 2.30 Sq.Mtr 14902.55

floor mounted front operated indoor type cubical panel

board necessary IP-42 and above protection as per

approval from engineer incharge made from 14 SWG

thick CRC M.S. sheet for outer body & doors, 16 SWG

thick CRC M.S.sheet for internal partitions with

necessary accesories , supporting angles/ flats channel

including cutting, bending, drilling, welding, riveting with

internal partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of

supplied switch gears, BUSBARS, suitable size of inter

connecting PVC copper wire / copper-aluminium strips,

rubber grommets, rib, bakelite control fuses/MCB for

measuring instruments, earth bus & earth bolts,

foundation flange - bolts-base Plates, sufficient nos. of

hinged doors, handles with locking arrangement and

rubber gasket,heavy duty end terminal

connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be

painted with epoxy powder coating. (The rates excludes

the cost of switchgears, bus bars, inter connecting mains

& Copper Aluminium strips, meters, Fuses etc. The

dimension shall be measured excluding base beams) The

panel shall be supplied with following approved

manufacturers with following size. (B) The standard

companies switch gear shall be used and only

manufacturers at CPRI approved factory (i) with 350mm

219 Providing , erecting , fabricating the M.S. structure as per 45.00 Kg. 77.77

requirement on site incorporating proper size of M.S.

angles,square,round, flats, bars, channels, sections

complete with cutting, welding, grinding & finishing duly

painted with one coat of red oxide with erection on site

as per direction of engineer in charge with necessary

grouting, cementing, plastering & finishing complete.

Item Rate In

Description of Item Quantity Unit Amount

No figures

220 Supplying and erecting approved make Octagonal pole 9.00 Ea. 6874.06

made from HR sheet steel. The pole should be made as

per IS. and shall be coated with hot dip galvanizing as per

IS 2629/2633/4759, suitable suspend local wind speed

with integral Junction box consist of terminal plate of

min 6mm Hylam sheet, standard profile 35mmX7.5mm

Din-Rail for MCB Mounting, stud type terminal and

arrangement for cable termination to be erected With

Suitable foundation (Included) as per details given by

manufacturer considering site requirement. (C) 5 Mtr.

Long 70 mm Top X 130 mm bottom dia, 3 mm thickness

with 200mmX200mmX12mm base plate, 4-M16 Bolts

and 600mm long with necessary G.I. J Bolts .Approx Pole

weight 46 kg

221 Supplying & erecting approved make SMC press 2.00 Ea. 515.10

moulded composite FRP. loop-in, loop-out approx. 2mm

thick box complete with Bakelite connector strip

5way(3P+N+E),DIN rail for mounting mob & hinged

doors as per requirement having locking arrangements

with mounting clamp with nuts, bolts & washers suitable

for erection on pole with cable clamps& earth bolt of

following size of box.(B) 250mm x 200mm x 100mm

222 Supplying and erecting Street light pole bracket 9.00 Ea 491.87

comprising main B Class GI pipe of 4.2 cm/require

outside dia. complete with suitable B Class G.I. sleeve

tubing of approx. 45cms.length and suitable for

76.5mm/80mm/require size of pole top having nuts and

bolts for fixing the brackets and having spread of 0.5 mtr.

Length with 110 deg.with vertical plane and suitable

welded stiffener reducer and nipple with check nut

complete painted with one coat.of Red oxide / PU base

primer and two coats of Aluminium / PU paint. paint

with following nos of arms. [A] Single Arm bracket

223 Supplying & erecting approved make IP 55 grade 1.00 Ea 13350.18

Company fabricated Timer Panel of following capacity

for switch On-Off street lights on time scheduling basis

made from 16G CRCA sheet duly epoxy power painted

inside and outside with hinged doors and locking

arrangement consisting of suitable size of 4 Pole MCB

and 4 pole contactor (cat-III)with analog time switch,

auto manual switch of same make and suitable input

and output Bakelite terminals and with door earthing

approved by Engineer in charge. (B) 40 Amp

Item Rate In

Description of Item Quantity Unit Amount

No figures

224 SITC of Digital / PCM / TDM EPABX System having SMT 1.00 Ea. 45398.49

design, system with flexible universal slots. Inbuilt Auto

attendant facility, Minimum 15 Nos. conference, Analog

extension line, Calling GSM, E&M line, PRI / EI & VOIP

program me through Analog telephone digital key from

Ethernet, public address cord, shall have unrestricted

simultaneous dialing facility,

QSIG protocol on PRI, 95 / STD / ISD / Local-Locking,

Class of Service, Quick Dial-Single Digit dialing of any two

external number, Once only ring device, Chairman /

Secretary - Do not disturb Facility, Power Down Mode,

Hot Line, Hot Outward Dialing, Day Night Mode, Auto Call

Back, Barge-in, Call Pick Up & Call Transfer, Call transfer

while Ringing with Voice Guide System, (DISA), Caller ID

(CLI), CLI Base ECF, CLI Base routing Internet Ready

Port, External Music Port, Call Budgeting, Call Most

Calculation (ASMDR), DID Direct Inverse Dialing,

External Music Input, Fax Homing, Global Directory

Printing with following capacities [[Approved by

Competent Authority i.e. not Below the rank of Executive

Engineer ] [A] No of Extension 16, No of Junctions 6,

Port IP Resource in-built, 4 Port Web base Video

Conferencing, No of expandable ports : 48, Operators

Console - 01 Compatible : ISDN

225 Supplying & erecting push button type telephone 5.00 Ea. 898.90

instrument having speaker phone Caller ID & speaker

phone with one touch memory (min.6 nos.)&

memories with display system Single line [[Approved by

Competent Authority i.e. not Below the rank of Executive

Engineer ]

226 Providing & erecting water cooler having storage 1.00 Ea. 55893.40

capacity 150 Ltr. & cooling capacity 150 Ltr.per hour @

an ambient temp of 45˚ C. The outlet temp. of the water

should drop by 15˚C within a hour, The water cooler

should be comprising of hermetically sealed compressor,

fan motor, condensing unit, water tank surrounded by

evaporating, coil, thermostats, relay etc.complete with

necessary inlet & outlet connection. The body of water

cooler will be made from Stainless Steel.

Item Rate In

Description of Item Quantity Unit Amount

No figures

227 Supplying & erecting 5 stage single reverse osmosis 1.00 Ea. 29187.99

water purification system with M.S. powder coated

frame, prefilter housing with 'O' ring presediment filter

GAC filter, carbon filter suitable buster DC pump capacity

80 psi, mention with 40 psi inline type post carbon filter

auto low & high pressure switches with following size of

storage tank & LPH capacity & erected as directed [C]

Ltr / Hr with 150 psi 2 nos booster pump

228 Supplying and erecting approved make panel mounting 2.00 Ea. 1275.63

type Digital Voltmeter having 3 digits LED display, 0 to

750 AC Volts range erected on existing panel board with

all connection, wiring etc .with manufacturers

calibration certificate.

229 Supplying and erecting approved make panel mounting 2.00 Ea. 1558.43

type Digital Ammeter having 3 digits LED display,

external CT operated, calibrated for 0 to 1000 Amps

suitable to operate on 500 Volt AC , erected on existing

panel board with all connection, wiring etc .with

manufacturers calibration certificate.

switch for 3 phase AC Supply 500 V on existing panel

board with necessary connections.

231 Providing & erecting L.T. Current Transformer with bar 6.00 Ea. 274.72

primary 50/5 to 1000/5 ratio 15 VA burden erected in

existing CRCA box duly secured with insulating materials

connected to the meter

232 Supplying and erecting approved make suitable panel 6.00 Ea. 43.43

indicator LED type lamp, lens cover, complete erected

with necessary connections.

Total Rs.

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures and

words) of the estimated rate mentioned above. Amount of my /our

Tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

The Contractor shall exhibit a board with detailed specification and details of work as directed by the

1 Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 Income tax TDS will be deducted at a source while making payments of bills

Item Rate In

Description of Item Quantity Unit Amount

No figures

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where

4 there is a change as per actual mix design the cost of difference of cement consumption have been deducted

from the rate of original item at the rate of input rate mentioned in all the tender.

Deputy Executive Engineer Executive Engineer

Vapi ( R & B ) Sub Division Valsad ( R & B ) Division

Vapi Valsad