Minor daily repair works of factory production and non production buildings, office buildings, stores etc. in side factory area at OFMK

Surface dressing in hard dense soil, not exceeding 15 cm deep and getting out as directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep in hard / dense soil and getting out. Complete all as specified and directed

Excavating in post holes in Hard dense soil (or similar holes) each n.exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm. Complete all as specified and directed.

Excavation over areas not exceeding 1.5m depth in hard/dense soils and getting out , Complete all as specified and directed

Excavating in trenches in hard / dense soils, n. exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out . Complete all as specified and directed

Site clearance : Clarence of site as directed.

Removal of excavated material - soils exceeding 250 m but not exceeding 500 mtrs. and deposited where directed. Complete all as specified and directed

S&L of Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering. Complete all as specified and directed

Hard core : Hard core with broken stone/ boulders of gauge not exc. 63mm, deposited, spread leveled in layers not exceeding 15 cm thick, and watered consolidated to required gradient & camber including watering. Complete all as specified and directed.

PCC : Plain Cement Concrete (1:4:8) Type D-2 using 40 mm graded aggregate in foundations, floors, filling and mass concrete, Complete all as specified and directed .

PCC : Plain Cement Concrete (1:3:6) Type C-2 using 40 mm graded aggregate in foundations, floors, filling and mass concrete, Complete all as specified and directed .

PCC : Plain Cement Concrete (1:2:4) Type B-2 using 40 mm graded aggregate in foundations, floors, filling and mass concrete, Complete all as specified and directed .

RCC : Reinforced Cement Concrete (1:2:4) Type B-0 using 12.5 mm graded aggregate: Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete. Complete all as specified and directed .

RCC : Reinforced Cement Concrete (1:2:4) Type B-1 using 20 mm graded aggregate on Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like. Complete all as specified and directed .

Brick work : Brick work with sub class ‘B’ bricks straight or curved in plan with (1:4) cement mortar , Complete all as specified and directed.

Stone Masonry : Walling of Squared Rubble regular coursed Stone masonry, well bonded, bedded and solidly hearted built in with 1:6 cement mortar, Complete in all respects as specified and directed.

Stone Masonry Except stones: Walling of Squared Rubble regular coursed Stone masonry, well bonded, bedded and solidly hearted built in with 1:6 cement mortar, Complete in all respects as specified and directed.

FORM WORK : Form work to sides of concrete foundations, footings, base of columns, raft or raft beams, sides of foundations and plinth beams and similar work, vertical or batter surfaces. Complete all as specified and directed.

Floor tiles : S&F of non skid Ceramic tiles, coloured, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. of set and jointed in neat cement slurry and pointed in white or coloured cement to match. Complete all as specified and directed.

Wall tiles : S & F of Glazed ceramic coloured wall Tiles 350x250x7/450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match. Complete all as specified directed

Supply only of liquid water proofing compound for incorporating concrete. Make. BASF, SIKA

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) in patches in repairs not exc 3.0 sqm each as directed. Complete all as specified and directed.

Screed Bed or bedding layer of mortar 20 mm thick for laying floor tiles in CM 1:4 for laying floor finishes. Complete all as specified directed.

Providing precast cement concrete, Type B1 (1:2:4) using 20mm graded aggregate, in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set jointed in CM 1: 6. Complete all as specified directed.

Demolition of brick work/ stone masonry built in cement mortar for the portions order to be dismantled. Complete all as specified directed.

Demolition of cement concrete of any description in any position not other wise described specifically provided for. Complete all directed at site.

S&F of PVC (SWR) floor trap/Nahani trap, 75mm dia., plain with grating including jointing with solvent cement of approved make as directed.

S&F of PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement of approved make as directed.

S&F of PVC (SWR) pipes 75 mm bore dia. single socketed in any length with rubber ring joints fixed to walls

S&F of PVC (SWR) pipes 110 mm bore dia. single socketed in any length with rubber ring joints fixed to walls

S&F of PVC (SWR) bends any radius for 110 mm dia. Bore pipes with rubber ring joints fixed to walls

SWG PIPE : Supply and fixing in Repairs of 100mm dia salt glazed stoneware (SWG) drain pipe, including cutting & removing existing damaged pipe and join the new pipe in position as specified and directed. Complete all as specified and directed.

SWG PIPE : Supply and Fixing in repairs of 150mm dia salt glazed stoneware (SWG) drain pipe, including cutting & removing existing damaged pipe and join the new pipe in position as specified and directed. Complete all as specified and directed.

IWC : S & F of vitreous China squatting pan, `Orissa` pattern, size 580 x 440 mm of make : Hindware/Cera/Parryware, with integral foot rests including P or S trap with necessary fittings for complete all including dismantling of existing water closet as specified and directed.

EWC : S & F of Wash down water closet (Pedestal pattern) of make : Hindware/Cera/Parryware, of any colour and size including P or S trap with necessary fittings for complete including dismantling of existing water closet as specified and directed.

Hand Wash basin : Supply & Fixing of vitreous china wash basin white, flat back or angle back type of size 550x400 mm including brackets including cutting for and pinning in ends of brackets, or erecting stand Make of wash basin: Parry ware, Hindware, Cera as approved for complete all as specified and directed.

Urinal bowl : Supply & Fixing of vitreous china urinal bowl white, flat back of size 465x355x265 mm including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, and union for discharge pipe fixed in repairs (excluding waste pipe, flush pipe and flushing cistern) Make of wash basin: Parry ware / Hindware / cera, Complete all as specified and directed.

Urinal partition : Supply & Fixing of vitreous china urinal partition white, of size 310x700 mm, terminating 40 cm above floor level. Make of wash basin: Parry ware / Hindware / Cera, Complete all as specified and directed.

Door Shutter (S&F) : Supply and fixing Flush door shutters 30 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides. complete all as specified and directed.

Shutter repair : Repairs to wooden shutters of any description exc. 1.00 Sqm but n. exc.2.00 Sqm each by resecuring or easing and adjusting without taking down including supply and fixing accessories like screws, nails. etc. complete all as specified and directed by EIC.

Removing to or from store of door shutters of any description of area exc. 1.0 sqm but not exc. 2.0 sqm each.

Shutter fixing : Fixing only of Wooden/Flush /PVC door shutter of any description and thickness with other connected builders hardware issued by factory in position including all necessary accessories like screws, nails, etc., refixing in other openings, complete all as specified and directed.

ALLUMINIUM TOWER BOLTS : Supplying and Fixing of size 200mm long Al. tower bolts, with bright bolt,including all necessary accessories like screws, nails, etc., complete all as specified and directed.

MS TOWER BOLTS : Supplying and Fixing of 200 mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed. including all necessary accessories like screws, nails, etc., complete all as specified and directed.

STEEL ALDROPS : Supplying and Fixing in repairs 250mm long mild steel sliding door bolts / aldrops plate type, stove enameled block with bright bolt not less then 12mm dia. With including a minimum of 06 bolts and nuts four on bolt plate & two on staple plate complete all as specified and directed

ALUMINIUM ALDROPS : Supplying and Fixing in repairs 150mm long aluminum anodized sliding door bolts/aldrops with hasp, staple and fixing clips of sheet not less then 12mm dia. With including a minimum of 06 bolts and nuts four on bolt plate & two on staple plate complete all as directed.

S & F of Hasp and staple, 100 mm long mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws

STEEL BUTT HINGES : Supplying and Fixing in repairs 125 mm mild steel medium weighty, cold rolled butt hinges, complete including welding if required all as specified and directed

STEEL BUTT HINGES : Supplying and Fixing in repairs 75 mm mild steel medium weighty, cold rolled butt hinges, complete including welding if required all as specified and directed

ALUMINIUM HANDLES : Supplying and Fixing in repairs 125mm long aluminum anodized cast type bow handles including screws complete all as specified and directed

Supply and Fixing of Mortice lock verticle type size 100 mm brass 2 levers including making hole in wooden shutter and welding hook to steel frame with all necessary accessories like screws etc., complete all as specified and directed

DOOR STOPPERS: Supply & Fixing of Floor Door Stopper of Aluminium. alloy anodized body with hard drawn Steel spring with all necessary screws, - size 150mm, complete all as specified and directed

Door closure : Supply and fixing of Door closer Aluminium extruded section body hydraulically regulated, designation No.3, universal type, suitable for door shutters of 1000 mm in width and of weight between 61 to 80 kg and fixed. complete all as specified and directed

PLYWOOD : Supplying and Fixing plywood in repairs, 9 mm thick grade BWR, type BB fixed with screws to timber frame work including removal of removal of existing damaged sheets. Complete all as specified and directed

PLYWOOD : Supplying and Fixing plywood in repairs, 12 mm thick grade BWR, type BB fixed with screws to timber frame work including removal of removal of existing damaged sheets. Complete all as specified and directed

PARTICLE BOARD : Supply only of Particle board 12 mm thick, medium density, flat pressed, single layer type or three layer type, BWR grade. Complete all as specified and directed

SHEET GLASS: Supplying and Fixing in repairs 4mm thick sheet glass of area n. exc.0.5 Sqm cut to size as per site requirement and glazing with pins & oil putty at any height including removal of existing damaged glass. complete all as specified and directed.

SHEET GLASS: Supplying and Fixing in repairs 4mm thick figured glass, pin head type of area n. exc.0.5 Sqm cut to size as per site requirement and glazing with pins & oil putty at any height including removal of existing damaged glass. complete all as specified and directed.

SHEET GLASS (except glass): Fixing only in repairs to sheet glass of area n. exc.0.5 Sqm cut to size as per site requirement and glazing with pins & oil putty at any height including removal of existing damaged glass. complete all as specified and directed.

WINDOW HANDLES: Supplying and Fixing in repairs 150mm long mild steel window handles either left or right operative , including suitable nuts and bolts, complete all as specified and directed

steel wire cloth : Supplying and Fixing in repairs stainless steel wire cloth 0.36mm nominal dia.(Guage 28) of wire and width of aperture 1.4mm to wooden / steel doors/ windows, including fixing with and necessary screws, nut bolts,nails and removal of existing damaged cloth etc., complete all as specified and directed

Mild steel wire cloth : supply only of galvanised steel wire cloth 0.56 mm nominal dia. and average width of aperture 1.0 mm to wooden / steel doors/ windows, including fixing with and necessary screws, nut bolts,nails and removal of existing damaged cloth etc., complete all as specified and directed

Nails : Supply of Plain head, lost head, lath, mild steel wire nails, bright finished of different dia. and upto 150 mm long.

Screws : supply of Mild steel wood screws, bright finished, with slotted countersunk head, designation 4 to 10 (2.74 to 4.88 mm nominal shank dia) n. exc 50 mm long .

Screws : supply of Mild steel wood screws, bright finished, with slotted countersunk head, designation 12 to 14 (5.59 to 6.30 mm, ditto), exc 50 mm but n. exc 100 mm long.

Supply glue for fixing wood, Make: Fevicol in 1 kg pack

Screw blots and nuts : S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc. 5 cm and not exc. 10 cm long and diameter of neck is 5 to 10 mm.

WOOD BEADING: Supplying and Fixing in repairs 2nd class hard wood beading section area exc. 3 sq cm and not exc. 6 sq cm, including removal of existing damaged beading and necessary screws, nails etc. complete all as specified and directed

WOOD BEADING: Supplying and Fixing in repairs 2nd class hard wood beading section area not exc. 3 sq cm, including removal of existing damaged beading and necessary screws, nails etc. complete all as specified and directed

G.I. PIPE: Supply & fixing in repairs of G.I. pipes 25mm dia(medium grade) and connections including fixing and connection in new or old position at any height (walls, ceiling, floors etc.) including pipe fittings as per site requirement. Complete all as specified and directed. make Jindal or Tata

G.I. PIPE: Supply & fixing in repairs of G.I. pipes 20mm dia(medium grade) and connections including fixing and connection in new or old position at any height (walls, ceiling, floors etc.) including pipe fittings as per site requirement. Complete all as specified and directed. make Jindal or Tata

Supply of GI Tank adaptor / Nipple 25 mm dia

PVC BIB COCK: Supply and fixing of 15mm dia PVC bib cock / tap standard of PTMT any colour high pressure screwed for iron pipe and fixed in reapirs. (Minimum weight 90 gms) Make : prayag only, damaged tap is to be deposited in stores. Complete all as specified and directed

CP pillar cock : Supply and fixing of 15mm dia cast copper alloy chromium plated pillar cock / tap of any type repairs, (make Ess, Parryware or Elvis ) damaged pillar cock is to be deposited in stores complete all as specified and directed.

STOP COCK:/ ANGLE COCK: Supply and fixing of 15mm stop cock cast copper alloy internal / external threads in repairs, min. Weight of cock 400grms, damaged stop cock is to be deposited in stores complete all as specified and directed

FLOAT VALVE: Only fixing of 15mm / 20mm /25mm dia PVC float valve in repairs at any height damaged float valve is to be deposited in stores complete all as specified and directed (Float Valves will be supplied by Factory)

PVC D/E PIPE CONNECTION : Supply and fixing of PVC Double End Pipe connection. in repairs, size:15mm with end nuts & washers of length 450mm. Make : Kohinoor. Complete all as specified and directed.

PVC D/E PIPE CONNECTION : Supply and fixing of PVC Double End Pipe connection. in repairs, size:15mm with end nuts & washers of length 600 mm. Make : Kohinoor. Complete all as specified and directed.

WASTE COUPLING: Only fixing of waste coupling any size & any type in repairs, damaged waste coupling is to be deposited in stores complete all as specified and directed

WASTE COUPLING: Supply and fixing of CP brass waste coupling any size 32mm dia. With all necessary fittings in repairs, damaged waste coupling is to be deposited in stores complete all as specified and directed

EWC SEAT COVERS : Supply and fixing of EWC plastic seat & cover in repairs, (Make: Parry ware or Hindware) to EWC Colour to match with existing damaged cover with CP or AL . hinging device. complete all as specified and directed

EWC SEAT COVERS : Fixing only of EWC plastic seat & cover in repairs, to cover with CP or AL . hinging device. complete all as specified and directed

Flush Cistern : Supply and fixing of PVC valveless, syphonic action type, flushing cistern/ flush tank of 10 llit capacity in repairs, with all necessary fittings low level, with inlet, ball valve, float and handle including brackets . (Make: Parr ware or Hindware) for complete all as specified and directed

Flush pipe / Bend pipe : Supply and fixing of polyethylene of low or high density or approved quality PVC bend pipe for flush tanks (either long or short) 32 mm dia, Complete all as specified and directed.

Wash basin : Only fixing of wash basin of any size & any type, including removal of existing and fixing suitable brackets & necessary connections complete all as specified and directed

SHOWER ROSE: Supply and fixing of shower rose Brass CP of size 125mm & any type in repairs, including removal of existing and fixing necessary connections complete all as specified and directed.

Rubber gasket : Supply of approved quality rubber or fibre board gaskets / washers for flush tanks etc. up to 80 mm dia bore any type as directed.

Ball valve : Supply and fixing of Ball brass valves for 15 mm dia bore pipe, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed. Complete all as specified and directed

Ball valve : Supply and fixing of Ball brass valves for 20 mm dia bore pipe, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed. Complete all as specified and directed

Ball valve : Supply and fixing of Ball brass valves for 25 mm dia bore pipe, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed. Complete all as specified and directed

PVC tank : Supply and fixing 1000 lit capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

PVC tank : Fixing only 1000 lit capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

Urinal spreader : Supply and fixing of Urinal spreader PTMT for fixing with 15mm dia pipe , Min. weight 60 gms, Make : Parryware only damaged tap is to be deposited in stores complete all as specified and directed

Health Faucet : Supply and fixing of Hand shower / Health Faucet along with flexible tube in chrome finish and wall hook including removal of damaged healh faucet, Complete all as specified and directed. Make : Cera, Hindware

CURTAIN BRACKETS : Only Fixing of Heavy duty M.S. powder coated wall mounting L Type Curtain Brackets (set of 2)suitable for 20/25 mm pipe including screws ,plugs complete all as specified and directed

CURTAIN BRACKETS : Supply & Fixing of Heavy duty M.S. powder coated wall mounting L Type Curtain Brackets (set of 2) suitable for 20/25 mm conduit pipe including screws , complete all as specified and directed

GRATING : Supply and fixing of 100mm SS / CP grating in repairs, complete all as specified and directed

Soap dish : Supply and fixing of stainless steel soap dish. Complete all as specified and directed.

Supply and fixing of plain Galvnised M S Sheet of thick 0.31 mm / 30 gauge fixing to Doors cut to size including necessary screws, nails complete all as specified and directed.

SS TOWER BOLTS : Supplying and Fixing of size 10mm dia, 150mm long mild steel/SS barrel tower bolts, stove enameled block with bright bolt including welding of Hook, screws, nails etc. if necessary complete all as directed.

Screw blots and nuts : S & F stainless steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc. 5 cm and not exc. 10 cm long and diameter of neck is 5 to 10 mm.

WASTE PIPE: Supply and Fixing of Waste pipe for Wash Basin or Sink of Heavy duty of Size 32mm/40mm including removing of damaged Waste pipe and fixing of new Waste pipe , complete all as specified and directed.

M-SEAL: Supply of M-seal regular epoxy compound for sealing joints, fixtures etc. in each 250gms pack

2 way Bib cock : Supply and fixing of 15mm dia cast copper alloy (Brass) Chromium plated Long Body two way bib cock / tap (Make Elvis, Camay, Parryware only) in repairs, damaged tap is to be deposited in stores complete all as specified and directed

Push cock : Supply and fixing of 15mm push cock cast copper alloy internal / external threads in repairs , weight 400grms of approved make, damaged push cock is to be deposited in stores complete all as specified and directed.

Wet Mix Macadam (WMM) with crushed stone aggregates, water, and approved an binder content and deposited, spread leveled in layers not exceeding 15 cm thick, and watered consolidated to required gradient & camber including watering. Complete all as specified and directed.

S&F of PVC (SWR) bends any radius for 110 mm dia. Bore pipes with rubber ring joints fixed to walls

S&F of PVC (SWR) pipes 150 mm bore dia. single socketed in any length with rubber ring joints fixed to walls

WPVC door frame : S & F of solid WPVC Door Frame of size 100x60 mm heavy density of 1100 kg/cum and high quality PVC laminated of choice colour. Complete all specified and directed.

PVC door shutter : S & F of Factory Made Solid WPVC Door Shutter with wood free EPS, 32 mm thick, heavy density 700 kg/cum and high quality PVC laminated on both side of choice colour.

Concrete admixtures : supply of concrete admixtures for extending workability, ideal for self-compacting concrete, high-performance concrete, improving strength, durability, and reducing shrinkage Make : SikaPlast-5203 , Fosroc Auramix 450 or equivalnt as approved and directed for complete.

CURTAIN PIPES: Supply and fixing of Stainless Steel conduit pipes of size 20mm dia - cut to length according to the size of window/door to use as curtain pipes, complete all as specified and directed.

CURTAIN PIPES: Supply and fixing of Stainless Steel conduit pipes of size 25mm dia - cut to length according to the size of window/door to use as curtain pipes, complete all as specified and directed.

Please Enable Macros to View BoQ information