CA NO CWE/FZR- 54/2019-20 SPECIAL REPAIR TO ROADS FROM POST NO 06 TO POST NO 7 IN DEPOT AREA AT FAD BADDOWAL AND CETC DORAHA MIL COMPLEX UNDER GE LUDHIANA

Amount

Material and Labour for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, applying evenly a priming/tack coat with bituminous primer (VG-30) @ 5 kg per 10 Sqm of road surface by sprayer operated by hot pressure mechanism and laying Bituminous premixed semi-dense asphaltic concrete 30 mm consolidated thickness (Design Mix) using minimum 5.5% binder content paving bitumen (VG-30) by weight of total mix laid with self propelling mechanical paver and rolling with 8 to 12 tonne power road roller to the required camber and gradient to uniform smooth surface, complete spread with mechanical paver all as specified and as directed.

Material and Labour for preparing existing top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, applying evenly a priming/tack coat of paving bitumen (VG-30) @ 5 kg per 10 Sqm of road surface by sprayer operated by hot pressure mechanism to receive bituminious macadam (as per item no 3 below), complete all as specified.

Material and Labour for Premix bituminous macadam (Design Mix), laid/rolled and compacted to required gradient and camber (consolidated) thickness 75 mm or less by binder content (paving bitumen(VG-30) @ 4% by weight of total mix laid with self propelling mechanical paver and rolling with 8 to 12 tonne power road roller to the required camber and gradient to uniform smooth surface, complete all as specified and as directed.

Material and Labour for Repair to pot holes in road surface not exceeding 1 Sqm in area & depth 25 mm (average) of each including sweeping free from dust and mud or water, scoring sunken surfaces in roads etc cutting around edges at least 30mm in depth, making good by applying a tack coat of bituminous primer paving bitumen (VG-30) @ 5kg/10sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg, blinded with 0.09 cum of stone chipping, 6.3 mm size as specified for semi-dense asphaltic concrete, 30 mm thick (quantities of stone chippings & bitumen to be proportionally increased for 30 mm thick) well rammed, complete all as specified.

Material and Labour for Providing and marking broken/continuous central/end line on the road pavement and the like of any description and width using hot applied thermoplastic compound 2.50mm thick (excluding thickness of glass beads) and providing reflective glass beads @ 250 gm per square metre as per IRC-135,confirming to MOSRT&H, complete all as specified and as directed.

Supply and Fixing in repair road studs/cat eye the body of studs is made of ABS material two reflectors fitted in the body. The road stud is dyanamically designed so that it can bear load upto 25 Tons and its impact strength is about 230 KN and weight of stud is 130gms. Body colour yellow with swareflex beads of size 100mmx19mm fixed on roads by nails at suitable intervals complete all as directed by Engr-in-Charge.

ANUJ ABROL CONTRACTOR