Development of Park

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations of cc drains and culverts upto 3.00m depth RBR-FNDN-1 1(A)

Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408 MORD. (Using gravel or black cotton soil ) unit 1.00 cum( with roller)

Filling with Read Earth / sand /gravel as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH RBR-FNDN-2(1)

Pycas panda Black (bag 21 x 21 feet)

fox tale Plam (8 to 10 feet size )

Song of India New White (15x16)

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH etc., complete as per SS and as directed by the Departmental officer in charge of the work by Manual means upto 3.00m depth in ordinary soils

Filling Sand in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH . The rate including cost and conveyance of all material, labour charges for filling, watering, ramming, etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniroage charges.

Filling Dust in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH. The rate including cost and conveyance of all material, labour charges for filling, watering, ramming, etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniroage charges.

Plain Cement concrete (1:4:8) using 40 mm metal with concrete mixer. All work upto plinth level including cost of all materials and labour charges etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges

Providing Concrete for plain/ reinforced concrete (1:2:4) Nominal mix using 20 mm nominal size graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including cutting for 14 days complete as per drawings and technical specifications as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges.

Supply, Delivery and Commissioning of wide slide Height of 1.5 Mtr Metal:- All pipes make should be Tata or Jindal. All pipes should be of "medium grade" as per IS1239 are galvanized and zinc dipped. Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs. All metal parts should be coated using primer for GI up to 40 microns follwed by powder coating to the thickness of 80-120 microns. Powder and Primer should be of Ackzonobel make.Slide Chute :- Wave slide chute made from best quality FRP (Fibre Reinforced Plastic) with thickness of 5mm in attractive colours.Safety & Maintenance:-All products of equipment should be tested as per EN1176 safety norms and ce certification must. Maintanance should be followed as per EN 1176 guidelines. The equipment should be withstand for the weight of user more than 100Kg.Hardwares :- All Nuts, Bolts,Washers should be of high tensile galvanised material. Including all excavation and Concrete work

Supply, Delivery and Commissioning of Arch Swing 3.0 Mtr x 1.25 Mtr x 2.6 Mtr.(L x W x H) Metal:- All pipes make should be Tata or Jindal. All pipes should be of "medium grade" as per IS1239 are galvanized and zinc dipped. Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs. All metal parts should be coated using primer for GI up to 40 microns follwed by powder coating to the thickness of 80-120 microns. Powder and Primer should be of Ackzonobel make.Bearing :- The bearings used are “6202” permanent lubricated sealed bearing of repute brand. Bearings are mounted in specially designed M.S. bush.Safety & Maintenance:-All products of equipment should be tested as per EN1176 safety norms and ce certification must. Maintanance should be followed as per EN 1176 guidelines. The equipment should be withstand for the weight of user more than 100Kg.Hardwares :- All Nuts, Bolts,Washers should be of high tensile galvanised material. Including all excavation and Concrete work

Supply, Delivery and Commissioning of Circular Swing 2.0Mtr x 1.25 Mtr x 2.1 Mtr.(L x W x H) Metal:- All pipes make should be Tata or Jindal. All pipes should be of "medium grade" as per IS1239 are galvanized and zinc dipped. Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs. All metal parts should be coated using primer for GI up to 40 microns follwed by powder coating to the thickness of 80-120 microns. Powder and Primer should be of Ackzonobel make.Bearing :- The bearings used are “6202” permanent lubricated sealed bearing of repute brand. Bearings are mounted in specially designed M.S. bush.Safety & Maintenance:-All products of equipment should be tested as per EN1176 safety norms and ce certification must. Maintanance should be followed as per EN 1176 guidelines. The equipment should be withstand for the weight of user more than 100Kg.Hardwares :- All Nuts, Bolts,Washers should be of high tensile galvanised material. Including all excavation and Concrete work. Including all excavation and Concrete work

Supply, Delivery and Commissioning of Four Seater MGR Dia.1.5 Mtr Metal:- All pipes make should be Tata or Jindal. All pipes should be of "medium grade" as per IS1239 are galvanized and zinc dipped. Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs. All metal parts should be coated using primer for GI up to 40 microns follwed by powder coating to the thickness of 80-120 microns. Powder and Primer should be of Ackzonobel make.MGR Seat :- Seats are made from best quality F.R.P. material with thickness of 5mm in attractive colours. Bearing :- Bearings are used are of “6209” and “30206” of reputed make. Bearings are mounted in specially designed M.S. bush.Safety & Maintenance:-All products of equipment should be tested as per EN1176 safety norms and ce certification must. Maintanance should be followed as per EN 1176 guidelines. The equipment should be withstand for the weight of user more than 100Kg.Hardwares :- All Nuts, Bolts,Washers should be of high tensile galvanised material. Including all excavation and Concrete work. Including all excavation and Concrete work

Supply, Delivery and Commissioning of Platform MGR Dia.1.5 Mtr Metal:- All pipes make should be Tata or Jindal. All pipes should be of "medium grade" as per IS1239 are galvanized and zinc dipped. Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs. All metal parts should be coated using primer for GI up to 40 microns follwed by powder coating to the thickness of 80-120 microns. Powder and Primer should be of Ackzonobel make.MGR PLatformt :- GI Plate are made from best quality F.R.P. material with thickness of 5mm in attractive colours. Bearing :- Bearings are used are of “6209” and “30206” of reputed make. Bearings are mounted in specially designed M.S. bush.Safety & Maintenance:-All products of equipment should be tested as per EN1176 safety norms and ce certification must. Maintanance should be followed as per EN 1176 guidelines. The equipment should be withstand for the weight of user more than 100Kg.Hardwares :- All Nuts, Bolts,Washers should be of high tensile galvanised material. Including all excavation and Concrete work

Supply, Delivery and Commissioning of Four Seater Swing 2.0Mtr x 1.25 Mtr x 2.1 Mtr.(L x W x H) Metal:- All pipes make should be Tata or Jindal. All pipes should be of "medium grade" as per IS1239 are galvanized and zinc dipped. Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs. All metal parts should be coated using primer for GI up to 40 microns follwed by powder coating to the thickness of 80-120 microns. Powder and Primer should be of Ackzonobel make.Bearing :- The bearings used are “6202” permanent lubricated sealed bearing of repute brand. Bearings are mounted in specially designed M.S. bush.Safety & Maintenance:-All products of equipment should be tested as per EN1176 safety norms and ce certification must. Maintanance should be followed as per EN 1176 guidelines. The equipment should be withstand for the weight of user more than 100Kg.Hardwares :- All Nuts, Bolts,Washers should be of high tensile galvanised material. Including all excavation and Concrete work. Including all excavation and Concrete work

Supply, Delivery and Commissioning of Sea Saw 2.4 Mtr X 0.5 Mtr x 0.5 Mtr (L x W x H) Metal:- All pipes make should be Tata or Jindal. All pipes should be of "medium grade" as per IS1239 are galvanized and zinc dipped. Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs. All metal parts should be coated using primer for GI up to 40 microns follwed by powder coating to the thickness of 80-120 microns. Powder and Primer should be of Ackzonobel make.Sea Saw Seat :- Seats are made from best quality F.R.P. material with thickness of 5mm in attractive colours. Bearing :- The bearings used are “6202” permanent lubricated sealed bearing of repute brand. Bearings are mounted in specially designed M.S. bush.Safety & Maintenance:-All products of equipment should be tested as per EN1176 safety norms and ce certification must. Maintanance should be followed as per EN 1176 guidelines. The equipment should be withstand for the weight of user more than 100Kg.Hardwares :- All Nuts, Bolts,Washers should be of high tensile galvanised material. Including all excavation and Concrete work

Supply, Delivery and Commissioning of Multi Sea Saw 2.4 Mtr X 0.5 Mtr x 0.5 Mtr (L x W x H) Metal:- All pipes make should be Tata or Jindal. All pipes should be of "medium grade" as per IS1239 are galvanized and zinc dipped. Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs. All metal parts should be coated using primer for GI up to 40 microns follwed by powder coating to the thickness of 80-120 microns. Powder and Primer should be of Ackzonobel make.Sea Saw Seat :- Seats are made from best quality F.R.P. material with thickness of 5mm in attractive colours. Bearing :- The bearings used are “6202” permanent lubricated sealed bearing of repute brand. Bearings are mounted in specially designed M.S. bush.Safety & Maintenance:-All products of equipment should be tested as per EN1176 safety norms and ce certification must. Maintanance should be followed as per EN 1176 guidelines. The equipment should be withstand for the weight of user more than 100Kg.Hardwares :- All Nuts, Bolts,Washers should be of high tensile galvanised material. Including all excavation and Concrete work

Supply, Delivery and Commissioning of Rocking Boat 2.0Mtr x 1.25 Mtr x 2.1 Mtr.(L x W x H) Metal:- All pipes make should be Tata or Jindal. All pipes should be of "medium grade" as per IS1239 are galvanized and zinc dipped. Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs. All metal parts should be coated using primer for GI up to 40 microns follwed by powder coating to the thickness of 80-120 microns. Powder and Primer should be of Ackzonobel make.Bearing :- The bearings used are “6202” permanent lubricated sealed bearing of repute brand. Bearings are mounted in specially designed M.S. bush.Safety & Maintenance:-All products of equipment should be tested as per EN1176 safety norms and ce certification must. Maintanance should be followed as per EN 1176 guidelines. The equipment should be withstand for the weight of user more than 100Kg.Hardwares :- All Nuts, Bolts,Washers should be of high tensile galvanised material. Including all excavation and Concrete work. Including all excavation and Concrete work

Supply, Delivery and Commissioning of Flying Butterfly 2.0Mtr x 1.25 Mtr x 2.1 Mtr.(L x W x H) Metal:- All pipes make should be Tata or Jindal. All pipes should be of "medium grade" as per IS1239 are galvanized and zinc dipped. Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs. All metal parts should be coated using primer for GI up to 40 microns follwed by powder coati ng to the thickness of 80-120 icrons. Powder and Primer should be Bearings are mounted in specially designed M.S. bush.Safety & Maintenance:-All products of equipment should be tested as per EN1176 safety norms and ce certification must. Maintanance should be followed as per EN 1176 guidelines. The equipment should be withstand for the weight of user more than 100Kg.Hardwares :- All Nuts, Bolts,Washers should be of high tensile galvanised material. Including all excavation and Concrete work. Including all excavation and Concrete work

Sky Walker 1.Metal:- The pipes Should of 'C' class of Jindal/TATA make of Galvanized With minimum of 100 microns ionized coated and ziinc dipped joint with robotic welded prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process Should dressed of removing all sharp edges and burns .All pipes and metal parts should be applied itch Primer then apply powder coated using standard powder of imported paints with international standards to the total thickness should not be less than 120 microns of. All metal parts should be tested accordance to iso 7227 2.Plastic:- All plastic parts should solid polyethylene and UV-stabilized should be used 3.Rubber:- High quality grip rubber should be used for the handle 4. Bearings:- All bearings should be reputed make and press fitted for smooth rotation, and does not require relubrication i.e., maintenance - free ball bearing 5. Nylon Alloys:- Should be used. 6. Safety &maintenance:- All products of equipment should be tested as per EN 16630 safety norms and certificates should be issued by the reputed notified national/international certified agency i.e., IPEMA, TUV, CPSC, SGS, Euro Tech, Universal Registrars and clearly display the GS test mark on the product as per EN 16630 safety certificates. Maintenance should be followed as per EN 16630 guidelines. The equipment should be with stand for the weight of user more than 100.00 Kg. Note: 1. Size of the equipment mentioned and reach must be maintained about plus or minus 15% variation will be considered provided they shall be confirmed to standards of ISI or international equivalent standard certifications as per document listed S No.7(e) of data sheet 2. Specifications mentioned for the items is minimum. Higher specifications can be considered 3. Supplier should provide Safety Instruction Display Board. SKY WALKER (L x W x H): 1800x780x1780 mm 1 No Safety Area:3400x3498 mm User:2 Person (With out GST )

Thaichi Spinner Tai Chi Spinner Specification: TAI CHI SPINNER 4 WHEEL with center pipe shall be of minimum 100mm NB dia of thickness not less than 5.00mm, Support frame shall be minimum of 32mm NB dia of thickness not less than 3.6mm & TAI CHI SPINNER rings shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded with Handle knobs are made from high quality nylon material. The rings are hinged over 32NB support frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require relubrication i.e., maintenance - free ball bearing. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm. The instruction plate of size 150mmX230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with APG&BC emblem and your company emblem at two sides facing to users with LASER printing. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV- stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity to EN16630. ( with out GST)

Air Walker Air Walker 1.Metal:- The pipes Should of 'C' class of Jindal/TATA make of Galvanized With minimum of 100 microns ionized coated and ziinc dipped joint with robotic welded prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process Should dressed of removing all sharp edges and burns .All pipes and metal parts should be applied itch Primer then apply powder coated using standard powder of imported paints with international standards to the total thickness should not be less than 120 microns of. All metal parts should be tested accordance to iso 7227 2. Plastic:- All plastic parts should solid polyethylene and UV-stabilized should be used 3.Rubber:- High quality grip rubber should be used for the handle 4. Bearings:- All bearings should be reputed make and press fitted for smooth rotation, and does not require relubrication i.e., maintenance - free ball bearing 5. Nylon Alloys:- Should be used. 6. Safety &maintenance:- All products of equipment should be tested as per EN 16630 safety norms and certificates should be issued by the reputed notified national/international certified agency i.e., IPEMA, TUV, CPSC, SGS, Euro Tech, Universal Registrars and clearly display the GS test mark on the product as per EN 16630 safety certificates. Maintenance should be followed as per EN 16630 guidelines. The equipment should be with stand for the weight of user more than 100.00 Kg. Note: 1. Size of the equipment mentioned and reach must be maintained about plus or minus 15% variation will be considered provided they shall be confirmed to standards of ISI or international equivalent standard certifications as per document listed S No.7(e) of data sheet 2. Specifications mentioned for the items is minimum. Higher specifications can be considered 3. Supplier should provide Safety Instruction Display Board. HD DOUBLE HEALTH WALKER/AERIAL STROLLER DOUBLE/ EQUIVALENT SIZE (L x W x H ). 2015x15x1300 Safety Area 51115x015 mm User:2 Persons (With out GST )

Shoulder Exercise Press Supply delivery and fixing of shoulder expercise Gym Item including all labour charges etc., complete as directed by the departmental in charge of the work

Seated Chest Press Shoulder Cum Chest Press Specifications 1.Metal:- The pipes Should of 'C' class of Jindal/TATA make of Galvanized With minimum of 100 microns ionized coated and ziinc dipped joint with robotic welded prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process Should dressed of removing all sharp edges and burns .All pipes and metal parts should be applied itch Primer then apply powder coated using standard powder of imported paints with international standards to the total thickness should not be less than 120 microns of. All metal parts should be tested accordance to iso 7227 2. Plastic:- All plastic parts should solid polyethylene and UV-stabilized should be used 3.Rubber:- High quality grip rubber should be used for the handle 4. Bearings:- All bearings should be reputed make and press fitted for smooth rotation, and does not require relubrication i.e., maintenance - free ball bearing 5. Nylon Alloys:- Should be used. 6. Safety &maintenance:- All products of equipment should be tested as per EN 16630 safety norms and certificates should be issued by the reputed notified national/international certified agency i.e., IPEMA, TUV, CPSC, SGS, Euro Tech, Universal Registrars and clearly display the GS test mark on the product as per EN 16630 safety certificates. Maintenance should be followed as per EN 16630 guidelines. The equipment should be with stand for the weight of user more than 100.00 Kg. Note: 1. Size of the equipment mentioned and reach must be maintained about plus or minus 15% variation will be considered provided they shall be confirmed to standards of ISI or international equivalent standard certifications as per document listed S No.7(e) of data sheet 2. Specifications mentioned for the items is minimum. Higher specifications can be considered 3. Supplier should provide Safety Instruction Display Board. PULL DOWN CHALLENGER/ SHOULDER EXERCISER DOUBLE /EQUIVALENT SIZE (L x W x H) : 2570 X 805 X 2685 MM Safety Area: 6297 x 4858mm User 2 persons. (With out GST )

Horse Rider Horse Rider 1.Metal:- The pipes Should of 'C' class of Jindal/TATA make of Galvanized With minimum of 100 microns ionized coated and ziinc dipped joint with robotic welded prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process Should dressed of removing all sharp edges and burns .All pipes and metal parts should be applied itch Primer then apply powder coated using standard powder of imported paints with international standards to the total thickness should not be less than 120 microns of. All metal parts should be tested accordance to iso 7227 2. Plastic:- All plastic parts should solid polyethylene and UV-stabilized should be used 3.Rubber:- High quality grip rubber should be used for the handle 4. Bearings:- All bearings should be reputed make and press fitted for smooth rotation, and does not require relubrication i.e., maintenance - free ball bearing 5. Nylon Alloys:- Should be used. 6. Safety &maintenance:- All products of equipment should be tested as per EN 16630 safety norms and certificates should be issued by the reputed notified national/international certified agency i.e., IPEMA, TUV, CPSC, SGS, Euro Tech, Universal Registrars and clearly display the GS test mark on the product as per EN 16630 safety certificates. Maintenance should be followed as per EN 16630 guidelines. The equipment should be with stand for the weight of user more than 100.00 Kg. Note: 1. Size of the equipment mentioned and reach must be maintained about plus or minus 15% variation will be considered provided they shall be confirmed to standards of ISI or international equivalent standard certifications as per document listed S No.7(e) of data sheet 2. Specifications mentioned for the items is minimum. Higher specifications can be considered 3. Supplier should provide Safety Instruction Display Board.. RIDER/AERO RIDER/ EQUIVALENT SIZE(L X W x H): 910x655x1270 mm Safety Area:3310x3000 mm User: 1 person (With out GST )

Standing Tripple Twister Supply, Delivery and Commissioning of TRIPPLE TWISTER STANDING -SIZE(LXWXH): 1200 x 1200 x 1450mm prime pipe shall be minimum of 100 NB dia of thickness not less than 5.00mm, twister plate support pipe shall be minimum of 65 NB dia of thickness not less than 3.6mm, Bottom frame support shall be minimum of 32NB dia of thickness not less than 3.6mm & Handle ring shall be minimum of 25 NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded. The twister plate is hinged over 65NB standing pipe with the help of specially heavy duty bearings should be SKF make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. All pipes shall be uniformly powder coated with AkzoNobel up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes shall be of SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750 mm deep with minimum of 100mm NB dia supported with M.S. Angle 24 X 24 X 3.8mm. The instruction plate of size 90mm X 160mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with "Tirupathi TUDA" emblem and your company emblem at two sides facing to users with LASER printing. All Nuts, Bolts,Washers should be of SS 304 material. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity and also with DIN 79000 and CE 45001. includingExcavation and Concreting the base of Equipment and installation.( Model No:OG 24) Make: Sansun, Arahanth.

Elliptical Cross Trainer Supply, Delivery and Commissioning of CROSS TRAINER -SIZE(LXWXH): 1200 X 500 X 1500 with prime Support and Bottom frame pipe shall be minimum of 80 NB dia of thickness not less than 3.6mm, Handle Pipe shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDALpf length of 2100mm with make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded. The Peddle hinged over 60NB pipe with the help of specially heavy duty bearings should be SKF make and press fitted for smooth rotation, and does not require relubrication i.e., maintenance - free ball bearing.Seat & Back rests are made with the GI Sheet of size 300X300X2mm with uniform bending radius to avoid sharp edges. All pipes shall be uniformly powder coated with AkzoNobel up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes shall be of SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750 mm deep with minimum of 60 NB dia supported with M.S. Angle 24 X 24 X 3.8mm. The instruction plate of size 90mm X 160mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with "Tirupathi TUDA" emblem and your company emblem at two sides facing to users with LASER printing. All Nuts, Bolts,Washers should be of SS 304 material. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity and also with DIN 79000 and CE 45001. includingExcavation and Concreting the base of Equipment and installation.( Model No:OG 02) Make: Sansun, Arahanth

Supply and delivery and fixing RCC Benches including all labour charges and transportation charges and loading and unloading charges etc., complete as directed by the departmental in cahrge of the work