MAINT/REPAIR/REPLACEMENT OF INCOMING/OUTGOING CABLES OF POWER GENERATORS, ALTERNATORS, ENGINE OVERHAULING, SENSING, GATE LIGHTS, GARDEN LIGHTS, FLOOD LIGHTS, WATER LEVEL INDICATORS, RISING MAINS, DELIVERY PIPES OF OVER HEAD TANKS, STARTER PANELS

Supply and Repair/Replacement of Laying in trenches or passing through pipe, 240 Sqmm 3.5 core LT XLPE cable with stranded aluminium conductor heavy duth for 1100 volts grade cross sectional area complete all as specified and as directed.

Supply and Repair/Replacement of Laying in trenches or passing through pipe, 70 Sqmm 3.5 core LT XLPE cable with stranded aluminium conductor heavy duth for 1100 volts grade cross sectional area complete all as specified and as directed.

Earth work in all kind of rocks excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the soft / disintegrated rock and disposal of surplus excavated rock as directed, within a lead of 50 m complete all as specified and directed.

Earth work in all kind of soil excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the hard / dense soil and disposal of surplus excavated soil as directed, within a lead of 50 m complete all as specified and directed.

Returning and filling in trenches incl spreading, levelling watering and raming in layer n.exc 25 cm soft / disintegrated rock complete all as specified and directed.

Returning, filling in including spreading levelling, watering and well ramming in layers n exc 25 cm using hard / dense soil obtained from excavation complete all as specified and directed.

Removing of excavated mtrls n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point.

Removing surplus hard dense soil obtained from excavation/ demolition exc 250m but not n exc 500m and depositing at places allowed by BMC all as specified and directed.

S & F and testing Electronic Governor Controller for capacity 160 KVA DG Set including taking down old Governor Controller.

S & F and testing Electronic Governor Controller for capacity 62.5 KVA DG Set including taking down old Governor Controller.

S & F and testing Electronic Governor Controller for capacity 30/40 KVA DG Set including taking down old Governor Controller.

S & F and testing Electronic Governor Controller for capacity 15 KVA DG Set including taking down old Governor Controller.

Supply and Cladding with glass/rock wool and aluminium sheets of exhaust manifoldfor for DG sets 160 KVA includung removing of existing asbestos rope or any other type of insulation complete all as specified and directed.

All as per Ser item No 13.00 but of capacity 62.5 KVA

All as per Ser item No 13.00 but of capacity 40 KVA

All as per Ser item No 13.00 but of capacity 15 to 30 KVA

Supply & Fix in replcement of Voltmeter analog type for voltage range of (0-24V) as per matching to existing complete with all accessories and wiring.

Supply & Fix in replcement of Ammeter analog type for current range of (0-24Amps) as per matching to existing complete with all accessories and wiring.

Checking the tappet clearance and adjustment of valve including replacement of tappet gasket for DG Set 15 to 30 KVA.

Checking the tappet clearance and adjustment of valve including replacement of tappet gasket for DG Set 40 to 62.5 KVA.

Checking the tappet clearance and adjustment of valve including replacement of tappet gasket for DG Set 160 KVA.

Draining out the diesel tank, cleaning/washing out the sludge and re-filling with diesel for the DG Set of capacity 15 to 30 KVA complete all as specified and directed

Draining out the diesel tank, cleaning/washing out the sludge and re-filling with diesel for the DG Set of capacity 40/62.5 KVA complete all as specified and directed

Draining out the diesel tank, cleaning/washing out the sludge and re-filling with diesel for the DG Set of capacity 160KVA complete all as specified and directed

Taking Down the AVR system and supply and fix new AVR system for DG set of capacity 40/62.5 KVA complete all as specified and directed

Taking Down the AVR system and supply and fix new AVR system for DG set of capacity 15 to 30 KVA complete all as specified and directed

Taking down the old U/S Actuator from its position and S&Fnew actuator for 160 KVA DG Set complete including taking down old actuator.

Taking down the old U/S Actuator from its position and S&F new actuator for 40/62.5 KVA DG Set complete including taking down old actuator.

Taking down the old U/S Actuator from its position and S&F new actuator for 15 to 30 KVA DG Set complete including taking down old actuator.

M&L for Replacement of turbo chargers repairs kit suitable for DG set 160 KVA.

M&L for Replacement of turbo chargers repairs kit suitable for DG set 40/62.5 KVA.

M&L for Replacement of turbo chargers repairs kit suitable for DG set 15 to 30 KVA.

M & L for sand cushioning for LT cable laid in trenches using screened sand of approved quality as per SSR Part-I all as specified & directed.

S & F unreinforced pre-cast concrete cable covers class LV types 2 flat size 250mm x 150mm x 40mm including removal of old covers.

Supply and Repair/Replacement of laying/jointing GI Pipe light grade 80mm dia with all fittings laid/fixed on wall/pole or under road/PCC crossing and all as specified and directed.

S&F inreplacement of ACP retro sign board of size 1.5 x 1.2 Mtr using retro reflective high intensity prismatic reflective sheeting. The back ground of board is Blue Colour with white border and writing letter, numbers white colour mentioning the DG Set subtation Details of substation. Retro sign board shall be pasted on 3 mm thick ACP sheet. The board shall be fixed on Wall including fixing of fastners , nuts, bolts, washer etc complete all as directed by Engineer-in-Charge at site.

Supply and Fix inreplacement of complete control wiring with single core multistranded copper cable with flexible conduit for DG set of various capacities.

M & L for Opening the DG set of 160 KVA greasing of all movable parts & equipments and replacing all flexible/steel wire mesh type hose pipes including fuel pipe line , belts & Bearings including re-assembling the complete Parts and testing complete and spare parts of the following shall be measured and paid under relevent items all as specified and as directed by Engineer-in-Charge

S & F Piston, Piston ring and liner for 160 KVA DG Set as per existing make & OEM complete.

Supply only Packing Kit for 160 KVA DG Set as per existing make & OEM complete.

M&L for Head and fuel injector assembly complete for 160 KVA.

Opening the DG set of 62.5 KVA greasing of all movable parts & equipments and replacing all flexible/steel wire mesh type hose pipes including fuel pipe line , belts & Bearings including re-assembling the complete Parts and testing complete and spare parts of the following shall be measured and paid under relevent items all as specified and as directed by Engineer-in-Charge

S & F Piston, Piston ring and liner for 62.5 KVA DG Set as per existing make & OEM complete.

Supply only Packing Kit for 62.5 KVA DG Set as per existing make & OEM complete.

M&L for Head and fuel injector assembly complete for 62.5 KVA.

Opening the DG set of 30/40 KVA greasing of all movable parts & equipments and replacing all flexible/steel wire mesh type hose pipes including fuel pipe line , belts & Bearings including re-assembling the complete Parts and testing complete and spare parts of the following shall be measured and paid under relevent items all as specified and as directed by Engineer-in-Charge

S & F Piston, Piston ring and liner for 30/40 KVA DG Set as per existing make & OEM complete.

Supply only Packing Kit for 30/40KVA DG Set as per existing make & OEM complete.

M&L for Head and fuel injector assembly complete for 30/40 KVA.

Supply and Fixing in Replacement of Chemical earthing with copper earth plate 90x60cmx5mm & copper earth strip 32x6mm as per SSR Part -I complete all as specified and as directed.

M&L in replacement for earthing complete with galvanized steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground to a depth not less than 2.25 mtr below the normal ground level with top edge of earth plate not less than 1.50 mtr below the normal ground level and connected to GI strips 25 x 4 mm by means of nut, bolt & washer and protected by 40mm dia GI pipe light grade and watering pipe of 20mm dia GI pipes light grade and connected to earth test point including necessary excavation, earth work, PCC chamber (1:3:6) type C-1 and 40 mm thick RCC pit cover in RCC (1:2:4) type B-1 using 6 mm dia MS round bars @ 150 mm C/C both ways all as shown in electrical plate No. 3 of SSR Part-I all as specified and directed.

Supply and Repair/Replacement installing, testing and commissioning factory made, floor mounted outdoor type LT panel board, cubicle type, suitable for 415 Volts, 3 Phase, 4 wire, 50 Hz, AC supply system, CPRI approved manufactures having bus bar chamber with insulated Copper bus bar four wire system, colour coded for each phase of rating as per under for phase and neutral, insulated on epoxy type insulators. The panel shall be dust and vermin proof, IP-54 class protection and made 3.00 mm of outer body and inner body 2.00 mm thick CRCA MS sheet , powder coated finish over one coat of red oxide primer on outside surface and painted inside with two coats of red oxide primer, both side opening type, including internal wiring with PVC insulated solid copper conductor cable, IS-694 marked, 1100 volts grade of appropriate size (but not less than 2.5 sqmm) including grouting of panel 30 cm above ground level by providing 60 cm long angle iron frame of size 40x40x5mm, welded on all the four corners, embedded in pcc 1:2:4 using 20 mm stone aggregate upto 30 cm complete all as specified and directed including the following accessories:- (Make :- CPRI approved) INCOMING :- (i)Thermal magnetic MCCB 4 pole,250 Amps 36 KA -01 No, (ii) Aluminium bus bar 400 Amps with insulator-04 Nos (iii) Digital Voltmeter three phase - 01 No. (iv) Digital Ammeter three phase - 01 No (v) Instrument control fuses and indication lamp LED Type set of three– one set OUTGOING :- (i) Thermal magnetic MCCB 4 Pole 160 Amps 25 KA -02 Nos (ii) Thermal magnetic MCCB 4 Pole ,100 Amps 25 KA -02 Nos (iii) Thermal magnetic MCCB 4 Pole 63 Amp 16 KA - 02 No (1 No for Spare) (iv) MCB TPN 63A - 04 Nos (v) Indication lamp LED Type set of three– one set

M&L for Cement Concrete 1:4:8 (40mm Graded Stone Aggregate) as in Foundation of Poles, Stays, etc. including Formwork (as/if required), complete all as specified and as directed.

M&L for Cement Concrete 1:2:4 (20mm Graded Stone Aggregate) as in Coping of Poles, etc. including Formwork (as/if required), complete all as specified and as directed.

M&L for Cement Concrete 1:3:6 (40mm Graded Stone Aggregate) as in Foundation of Poles, Stays, etc. including Formwork (as/if required), complete all as specified and as directed.

M&L and Repair/Replacement for erecting of steel tubular swaged poles swan neck type complete with cast iron base plate, finial taper plug, Cap, mild steel bolts, nuts,screw, etc. type 410 SP-31(9.0 meters long) complete all as specified and directed by Engineer - in - Charge

M&L and Repair/Replacement for erecting of Prestressed concrege pole 9.0 metres long, 102x152mm at top and 102x289mm at bottom, class 10 complete all as specified and directed by Engineer - in - Charge

S&F in replacement on pole street light bracket fabricated out of GI Tubing light grade 40 mm bore Bend to the shape as directed and of length 1.5 mtr complete with mounting MS clamp of flat iron of suitable size 02 Nos incl nut bolts Etc of suitable size all as specified and directed by Engr In charge

Supply and Repair/Replacement of hot press moulded SMC junction box door fixed with left side hinged inside dimension of 240x130x95 mm Fixed with cable terminals with one number of 16 Amp SP MCB incl fixed on pole with clamp nuts,bolts etc complete all as specified and directed by Engineer-in-charge.Make-Sintex/Hensal

M&L For repair and maintanance to Highmast Pole including cleaning/ Greasing/ oiling of swr and wrench. The crown of highmast taking down by using ladder or hydra and to check all connections of light, contactor & MCBs and making servicable complete all as specified and directed by Engineer - in - Charge.

Supply and Repair/Replacement of LED Solar street light fitting 15 Watt including in built, lithium ion battery, solar panel, charge controller with dusk down sensor complete all as specified and directed by Engineer - in - Charge Make-Havells/Surya/Bajaj

Supply and Repair/Replacement of LED street light fitting 70/72 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp IP 65/66 protection complete in pole/post/wall position by connecting the electrical connection and tightening the nut,bolts and clamps and all as specified and directed by Engineer - in - Charge including taking down the u/s street light fittings.

Supply and Repair/Replacement of LED street light fitting 120 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp IP 65/66 protection complete in pole/post/wall position by connecting the electrical connection and tightening the nut,bolts and clamps and all as specified and directed including taking down the u/s street light fittings.

Supply and Repair/Replacement of flood light LED luminaire white120 watt IP -65 flood light with highlighting architecturel facade highmast/basket ball court/squash court/batmittan court light complete all as specified and directed including taking down the u/s flood light fittings.Havells/C&S/CG

Supply and fix of Integral LED aviation luminaire light comprising of aluminium housing with polycarbonate enclosure complete in highmast light in position by connecting the electrical connection and tightening the nut,bolts and clamps and all as specified and directed including taking down the u/s aviation light fittings.

Supply and Repair/Replacement of new generation post top energy saving environmental friendly,long life aesthetically designed with symmetrical light distribution,spun aluminium landscape luminaire with high power LED as light sourse Coral (opal) - IP65 suitable for pole dia 76 mm with 25 watt LED lamp complete all as specified and directed by Engineer - in - Charge.

Supply and Repair/Replacement of Garden Bollard light BGBOM 650 9W LED Bollards lightDie cast aluminium graphite grey powder coated GI Pipe Housing ,Mushroom shape opal acrylic diffuser if fixed in die-cast aluminium base for pleasant light output,LED mounted on die-cast aluminium base,IP-65, 240 Volt,Luminaire is provided with base plate and fixing holes for directely mounting on the concrete pedestal including including taking down the u/s street light fittings complete all as specified and directed by Engineer - in - Charge

Supply and Repair/Replacement of Laying in trenches or passing through pipe,16 Sqmm 4 core LT XLPE cable with stranded aluminium conductor heavy duth for 1100 volts grade cross sectional area complete all as specified and directed by Engineer - in - Charge

Supply and Repair/Replacement of Laying in trenches or passing through pipe,25 Sqmm 4 core LT XLPE cable with stranded aluminium conductor heavy duth for 1100 volts grade cross sectional area complete all as specified and directed by Engineer - in - Charge.

Supply and lay Double Walled Corrugated (DWC) Pipes of dia 50mm having corrugation on the outer wall and plain surface on the inner wall confirming to IS14930 (Part-II) for protection of UG cables size 50 mm outer dia laid in trenches/ road/ drain or fixed along wall, poles or laid under floor all as spd and as directed by Engr-In-Charge.

Supply and Repair/Replacement for weather proof flat twin core 6 sqmm multistrand Aluminium conductor cable with PVC conduit of dia 25mm with accessories complete all as specified and directed by Engineer-in-Charge.

Supply and Repair/Replacement for Cable with copper conductor PVC round sheathed (flexible) 3 core 4 sqmm industrial cable complete all as specified and directed by Engineer-in-Charge.

Supply and Repair/Replacement of Water level indicator for water tank including 25mtr copper wire water tank over flow & empty alarm with four level indicator 230 Volt AC operated specified and directed.

Sypply and Repair/Replacement laying of 3 layer PP-R pipes of dia 160mm SDR 7.4 & SDR 11 UV stabilised and antimicrobial fusion welded having thermal stability for Hot & Cold water supply all PP-R plain and brass threded polypropylene random fittings including fittings such as bends, tees, elbows, short pieces, connectors, back nuts and connections fixed in new or old position in trenches, walls, floors etc complete all as specified and directed.

All as per above item No. 65.00 but dia 63 mm

All as per above item No. 65.00 but dia 50 mm

Supply and Laying of replacement of Ductile iron pipes of dia 150 mm with K-9 spigot and socket ends centrifugally cast. Class LA, in any length, laid in trenches complete all as specified and directed.

Supply and Laying of replacement of Ductile iron pipes of dia 100 mm K-7 with spigot and socket ends centrifugally cast. Class LA, in any length, laid in trenches complete all as specified and directed.

Dismantling and taking down old u/s starter of any make and Supply and fix starter suitable for upto 10 hp motor type MK-1 complete with sheet-steel enclosure complete all as specified and directed.

Supply and Repair/replacement of 6 Sqmm 3 core electric supply cable PVC insulated copper cable, PVC round sheathed Submersible cable multicore industrial Cables for voltage grade upto 1100 V complete with copper lugs all as specified and directed by Engr-in-charge.

M&L in Replacement of earthing complete with copper plate 60×60cm ×3.15mm thick buried directly in ground to a depth not less than 2.25 mtr below the normal ground level with top edge of earth plate not less than 1.50 mtr below the normal ground level and connected to Copper earth strip 20x3mm by means of nut, bolt & washer and protected by 40mm dia GI pipe light grade and watering pipe of 25mm dia GI pipes light grade and connected to earth test point including necessary excavation, earth work, PCC chamber (1:3:6) type C-1 and 40 mm thick RCC pit cover in RCC (1:2:4) type B-1 using 6 mm dia MS round bars @ 150 mm C/C both ways all as shown in electrical plate No. 3 of SSR Part-I all as specified and directed.

M&L for replacement Copper strip 20 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground

Supply and Repair/Replacement for 200 AMP, MCCB 4 pole 415 volt, AC 50 Hz, 4 pole, 25 KA with adjustable thermal and fixed magnetic setting system against over load and short circuit conditions incl neutral adjustment (Ics=100% of Icu) of capacity suitable of Existing panel board for replace of unserviseble MCCB complete all as specified and directed. Havells/Legrand/L&T

S & F inreplacement of Dosing pump suitable for chemical dosing in raw water/treated water with Max injection pressure 4 Bar (4 Kg/Sq cm) Capacity - 10 LPH as per requirement at site complete all as specified and directed.

Supply and fixing inreplacement of PVC Dosing tank of capacity 100Ltr capacity for pump house for dosing chemical complete all as specified and as directed.

Supply and fixing inreplacement of Multiport valves Suitable for RO plant complete all as specified and as directed.

Supply and Repair/Replacement of power contactor 3 pole suitable for starter complete all as specified and as directed.

S&F in replacement Volt meter suitable for pump house panel complete all as specified and directed.

S&F in replacement Ammeter suitable for pump house panel complete all as specified and directed.

M&L in repair for Pump house panel control wiring with checking and tighten all connection with suitable lugs complete all as specified and directed.

Supply & fix in repair and testing Water meter flange type ,Bulk enclosed Dry Dial Type, Hydraustatic pressure 16 Kg /cm 2, 100MM Dia bore inlet outklet with all fitting (Nut,bolts, washers, rubber packing etc) complete all as specified and as directed.

Supply in replacement of coupling hub suitable for single/multi stage centrifugal pump set of capacity upto 5 to15HP of any make complete with all plates, nuts, bolts and connected accessories.

M&L inreplacement of cast iron fittings upto 150mm dia pipe ie. bend, Tee pieces, Y junction, cross, collars, caps and plugs, connecting pieces etc including taking out/dismantling old unserviceable fittings, complete all as specified and directed.

S&F inreplacement of ACP retro sign board of size 1.5 x 1.2 Mtr using retro reflective high intensity prismatic reflective sheeting. The back ground of board is Blue Colour with white border and writing letter, numbers white colour mentioning the Pump House Details. Retro sign board shall be pasted on 3 mm thick ACP sheet. The board shall be fixed on Wall including fixing of fastners, nuts, bolts, washer etc complete all as directed by Engineer-in-Charge at site.

Please Enable Macros to View BoQ information