REPAIR TO SHEDS, INTERLOCKING TILES, GATES, CONCERTINA COILS, BARBED WIRES AND OTHER MISC B/R WORKS IN OMQ / SMQ / MAP AND COMMON AREA AT AF-I UNDER GE (AF) JAMNAGAR NO.2

Amount

Dismantling of paver block including demolition of cement mortar bedding or backing coat, including removal of debries to outside MOD land complete all as specified and directed.

M&L for 100mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in Sub base complete all as specified and directed.

M&L for 25mm Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M & L for Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and directed.

Relaying machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and directed.

M & L for 75mm thick granite stone kerb of roughly squared stones of size 20cm x 30cm, dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in cement mortar 1:6 and struck flush complete all as specified and directed.

Dismantling of kota stone slabs and granite tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons cills or platform etc complete all as specified and directed.

M&L for Granite work 15 to 18 mm thick (table rubbed and polished) in cooking platforms laid over and including 15 mm thick screed bed in CM 1:6, including pointing in coloured cement (1:2) using marble dust with admixture of pigment to match with granite shade complete all as specified and directed.

M&L for Granite work 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, laid over and including 15 mm thick screed bed in CM 1:6, including pointing in coloured cement (1:2) using marble dust with admixture of pigment to match with granite shade complete all as specified and directed.

M & L for machine cut & machine polished kota stone slab 18 to 20 mm thick as in kitchen platform, treads of steps laid over and including 15 mm thick screed bed in CM 1:6, jointed with grey cement slurry mixed with colour pigment to match the shade of the slab, rubbing and polishing complete all as specified and directed.

M &L for 18-20mm thick machine cut kota stone slab in riser of steps, skirting,dado and pillar laid over cement mortar in 1:4 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for rounding to edges of granite / kota stone slabs edge, such as in steps cooking platform, and other similar situation.

Demolition of concrete surfaces in ground floor and paving n.exc. 15cm thickness (below or above ground level) and removing the same to a distance of 1.5km including loading and dumping/ levelling at the destination complete all as specified and directed.

M&L for 100 mm thick cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) as in floor / hard standing etc finishing the surface even and smooth without using extra cement and spike rolling to surface or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth potection including finished the surface even and smooth without using of extra cement complete all as specified and directed.

Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debris to outside MOD land complete all as specified and directed.

M & L for 25 mm thick cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in levelling course complete all as specified and directed.

M&L for Non - skid joint free coloured Ceramic tiles (1st quality) not less than 7 mm thick of size exc 0.06 sqm but n exc 0.11 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over & including 15mm screed bed or bedding in CM 1:6 complete all as specified and directed.

M&L for Non - skid joint free coloured Ceramic tiles (1st quality) not less than 7mm thick tiles of size exc 0.11 sqm but n exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over & including 15mm screed bed or bedding in CM 1:6 complete all as specified and directed.

M&L for Non - skid joint free coloured Ceramic tiles (1st quality) not less than 7 to 8 mm thick tiles of size exc 0.18 sqm but n exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over & including 15mm screed bed or bedding in CM 1:6 complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 300 x 450 x 7mm / 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat of mortar in CM 1:4 for laying wall tiles finishes complete all as specified and directed.

Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debris to a distance exc 1.5 Km but n. exc 2 Km. complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:6 on brick or stone walls to be finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on stone / PCC block masonry wall surface, including mixing liquid water proofing compound in second layer only as per manufacturers instructions, finished the surface even & smooth without using extra cement complete all as specified and directed. Note:- WPC will be measured & paid separately

M&L for 5 mm thick rendering in cement mortar 1:3 on ceiling, finished the surface even & smooth without using extra cement complete all as specified and directed.

Supply only Liquid water proofing compound complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls & applying two coats of distemper oil emulsion over a coat of chalk whitening compatible primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings complete all as specified and directed.

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall / ridge, fixed with self tapping screws complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M & L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or rivetted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M & L for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade St.-240 complete all as specified and directed.

M & L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etcforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for preparation of new surfaces of steel exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Excavating soft/loose soil in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

M & L for PCC (1:3;6 ) type C2 (using 40 mm graded stone aggregate) cement concrete in foundation complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

S & F hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wiremesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S & F 5 to10mm dia mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.

S & F Mild steel bars 10mm dia and over (Fe-410 Gde-E-250), cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Dismantling fencing wite mesh, any type

Supply only MS galvanisd fencing, size 50mm X 50mm or any type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

S & F in repairs concertina coil of 1050mm / 600mm / 450mm dia opened with standerd specification on angle iron above boundary wall and other places complete all as specified and directed.

S & F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. Note : Each line wire to be measured.

Excavating in trenches in soft/loose soil n.exc 1.5m wide and n.exc 1.5m in depth for foundation, laying pipes, cables etc n.exc 10sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

M&L for cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) in foundation, filling and mass concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40mm graded stone as in surface channel and drains, complete all as specified and directed.

M&L for providing, cement concrete in coping or mud stops, rounded or chamfered on edges type B0 1:2:4 (using 12.5mm graded stone aggreagte) complete all as specified and directed.

Returning, filling including spreading, watering and well ramming in layers n.exc 25 cm in soft/loose and hard/dense soil complete all as specified and directed.

Removing excavated material exc 1.5 km but n.exc 5.0 km and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Demolition of brick work / stone work / PCC block masonry built in Cement mortar complete all as specified and directed.

M & L for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:4 type C1 (1:5:8) (using 20mm graded stone aggreagate), complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on other than fair faces of brick work or concrete surfaces and finish the surface even and smooth without using extra cement complete all as specified and directed.

Dismantling of existing ACP panels at height of 6-7 mtrs complete all as specified and directed.

Dismantling of existing Alphabet letters of ht not exc 30 cm at height of 6-7 mtrs complete all as specified and directed.

S & F Aluminium ACP Panels of Air force blue in colour as existing frame at height of 6 to 7 mtrs, cut to size as reqd and fixing with nails and screws or alternate arrangement etc complete all as specified and directed. Note: All electric work for fixing the panels shall be exclusive of rates quoted by contractor.

Fixing the old Alphabet letters on ACP Panels as directed.

Dismantling expanded metal, any thickness or mesh, fixed with steel, n exc 4 kg per sqm complete all as specified and directed.

M&L for running welding in repairs for thickness of metal to be welded exc 6mm but n. exc. 9mm

S & F welded steel wire fabric n exc 4 kg, to wood or steel members complete all as specified and directed.

Indice Technologies (BID ID -3124827)

Nirmal Construction (BID ID -3125511)