Loading…
Loading…
Tender Value
₹22.7 L
EMD Value
₹25,000
Closing Date
5 Sept 2026, 11:00 pm
Karnataka Power Corporation Limited
DURGAPPA
9480682533
Providing Sliding Windows and other improvement works to Switch gear buildings in CHP area at RTPS
KPCL/2026-27/OW/WORK_INDENT4696
KPCL/2026-27/OW/WORK_INDENT4696
Reserved
Other Works
Two Tender Document System(Two Cover)
KPCL Executive Engineer RTM Office RTPS Raichur
The intending bidder should have satisfactorily completed as a prime contractor (at least 90% of the contract value) at least one Similar/Civil work of value not less than Rs. 6.682 Lakhs (inclusive of GST) in the preceeding Five financial years (i.e 2021-22, 2022-23, 2023-24, 2024-25 & 2025-26). The certificate issued by the Competent Authority not below the rank of Chief Engineer in case of KPCLworks and not below the rank of Executive Engineer and equivalent in case of other Government Organizations is to be uploaded in the Technical bid. (Work done of previous years shall be given weightage of 10% per year to bring them to the present price level of financial year 2026-27).
The Intending bidder in his name should have achieved in at least one financial year a minimum Financial Turnover (in all classes of civil engineering construction works only) of Rs.26.73 Lakhs (inclusive of GST) during the preceding five financial (i.e 2021-22, 2022-23, 2023-24, 2024-25 & 2025-26). The bidder shall submit certified copy of the turnover certificate duly certified by the chartered Accountant for the respective two years & the same shall be uploaded along with the technical bid. (Financial turnover of previous years shall be given weight at 10% per year to bring them to the present price level of financial year 2026-27)
Any reputed individual/company registered KPWD Class-III and above contractor is eligible to apply and valid certificate issued in this regard shall be uploaded
Income tax PAN
Independent PF code.
Valid GST registration certificate
The bidder shall belong to CAT-II(A) Caste community as per Govt. of Karnataka. Valid CAT-II(A) Caste certificate issued by Govt. of Karnataka shall be uploaded
The bidder shall be a domicile of the State of Karnataka for more than 10 years certified by Govt. of Karnataka. Valid Domicile certificate issued by Govt. of Karnataka shall be uploaded
Tenderers who meet the specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under. Tender capacity: (A x N x 5 - B), where, A - Maximum value of works executed in any one year during the last five years (updated to 2026-27 price level) taking into account the completed as well as works in progress. N - Number of years prescribed for completion of the works for which Tenders are invited for 0.33 Years. B - Value at 2026-27 price level of existing commitments and ongoing works to be completed during the next 0.33 year period of completion of the works for which Tenders are invited
The Bidders should upload the following declarations by duly signed, I/we shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by KPCL or by any State Government/Government of India/ Union Territory. I/we declares that EMD has not been forfeited and None of my contracts have been terminated/foreclosed on account of default in KPCL or elsewhere during the past 3 (Three) years. My/our offer has no conditions contravening the commercial conditions of the bid. I/we have studied the site conditions, labour conditions and read the Bid documents and related matters carefully and diligently and that he has submitted the bid having studied understood and accepted the full implications of the agreement. I/we shall pay fair and reasonable wages, which shall not be less than the minimum wages fixed by GOK to the labours/workmen employed in the contract. I/we have accepted the condition that KPCL reserves the right to foreclose the contract at any point of time without assigning any reason
₹570
₹25,000
22 Aug 2026
22 Aug 2026
7 Sept 2026
24 Aug 2026
Providing Sliding Windows and other improvement works to Switch gear buildings in CHP area at RTPS
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) inc...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Providing & fixing of 2 track 2 panel sliding windows made out of multi chambered UPVC (Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastome...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windo...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Bid document.docx
Tender Document • 18.70 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].