REPAIR AND REPLACEMENT OF BnR NATURE WORKS (FLOORING, TILING, JOINERY, PLUMBING ETC) AND MISCELLANEOUS REPAIR TO SECURITY WALLS, GATES, FENCING, DRAIN, PATH AND OTHER ALLIED WORKS IN LASTEC, JCB, MSHU (I), OTM/RESIDENTIAL AREA, CEPTAM, KASHMIR HOUSE

Amount

S&F in repair 15 mm bore fancy type stop valve/Angle valve with wall flange, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or brass ferrule etc complete all as specified and directed.

S&F in repair 15 mm bore angular fancy type stop valve/Angle valve with wall flange, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe etc complete all as specified and directed.

S&F in repair 15mm bore brass chromium plated single lever basin mixture without pop up waste system with 450 mm long braided hoses etc complete all as specified and directed.

S&F in repair 15 mm bore two way angle valve with wall flange brass chromium plated,long body, complete all as specified and directed

S&F in repair Bib Tap fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe of 15 mm bore etc complete all as specified and directed

S&F in repair for 15mm bore brass chromium plated fancy type pillar tap with capstan head screwed down high pressure with or without lettred hot or cold with long screw shank & fly nuts complete all as specified and directed

S&F in repair for brass chromium plated fancy type towel ring square shaped and fixed complete all as specified and directed.

S&F in repair brass chromium plated fancy type towel rail 600 mm long complete all as specified and directed .

Repairs to leakage in bib tap, pillar tap, stop cock, Angle valve and low level flushing cistern etc of any description by changing the unserviceable washer,Faces etc, complete all as specified and directed.

S&F in repairs flush pipe PVC for low level flushing cistern including jointing to WC complete all as specified and directed.

S&F in repair Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers including taking down old unserviceable complete all as specified and directed.

S&F in repair floor mounted premium/1st quality EWC white with integrated flushing cistern closed pattern including all necessary accessories like ray bolts/gel gaskets etc complete all as specified and directed.

S&F in repair PVC connection 45/60 cm long with brass check nuts on both sides suitable for 15 mm bore iron pipe etc complete all as specified and directed.

S&F in repair brass chromium plated toilet Paper Holder with Flap complete all as specified and directed.

S&F in repair 125 mm Stainless steel Grating Square /Round with or with out hole complete all as specified and directed.

S&F in repair brass chromium plated soap dish fixed to wall with CP brass screws etc complete all as specified and directed.

S&F in repair Stainless steel (AISI 304 grade) Satin finish automatic hand dryer complete all as specified and directed.

S&F in repair looking mirror 5.50 mm thick of superior quality, any size, with approved border design fixed with commercial plywood 6 mm thick or AC board and with teak frame complete all as specified and directed.

S&F in repair Corner shelf 12" made out of 5 to 7 mm thick superior quality glass with CP brackets and railing fixed etc complete all as specified and directed.

S&F brass chromium bottle trap (with internal partition) 32mm size with 300 mm & 190mm long wall connecting pipes & wall flange complete all as specified and ditrected.

S&F in repair Push Button Soap Dispensers with ABS body of capacity 0.80 ltr complete all as specified and directed.

S&F in repair brass chromium plated health faucet, telephonic type,with CP flexible arms and Jet,of approved make, suitable to fixed to 15mm bore CP angle valves, etc complete all as specified and directed .

S&F in repair brass chromium plated toilet paper holder w/o flap complete all as specified and directed .

S&F in repairs PVC waste pipe 32/39 mm bore for WHB/Urinal/Sink with union etc complete all as specified and directed .

S&F in repair 500 ltr capacity triple layered heavy duty blow moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PVC float valve complete all as specified and directed.

S&F in repair 1000 ltr triple layered heavy duty blow moulded polyethylene water storage tank, (cylindrical vertical with closed top) hosted and fixed in position including 20 mm dia PVC float valve complete all as specified and directed.

Taking up or down 15 mm bore steel tubing & connection etc complete all as specified and directed.

Taking up or down 20 mm bore steel tubing & connection etc complete all as specified and directed.

S&F GI water tubing 15 mm bore, medium grade , galvanised with all fittings and fixed complete to walls and ceiling or laid in floors including cutting in wall /floor for pipe etc complete all as specified and directed.

S&F GI water tubing 20 mm bore, medium grade , galvanised with all fittings and fixed complete to walls and ceiling or laid in floors including cutting in wall /floor for pipe etc complete all as specified and directed.

Supply and fix 32 mm dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and a n t i m i c r o b i a l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed. Note:- Cutting chases for concealing the pipes & fittings etc wherever required and making good, disturbed surface in Cement mortar 1:3 complete shall be included in the quoted rate.

All as per item ser No 31.00 above but 20 mm dia .

S&F in repairs vitreous china wash down water closet pedestal pattern white excluding fixing bolts, flushing cistern and flush pipe complete but including PVC seat cover with aluminium hinging devices & EWC CP Jet chromium plated with 1.00 mtr long, PVC connection pipe etc complete all as specified and directed.

S&F in repairs WC Orissa pattern size 580 x 440 mm of vitreous china (white) fixed with all fittings and accessories with including integral footrest & taking down old WCs etc complete all as specified and directed.

S&F in repair PVC low level flushing cistern 10 ltr capacity sleek having weight not less than 1.80 KG including PVC bend, supporting brackets and complete accessories white colour as in repair etc complete all as specified and directed.

S&F in repair urinal, Half stall type,white with grating, union for discharge pipe, flush pipe and waste pipe, CP urinal Spreader fixed to water supply pipe etc complete all as specified and directed.

Supply and fixed in repair 10mm thick glass urinal partition of size 450 x900mm complete all as specified and directed.

M&L for painting on road hinting/lines with hot applied thermo plastic compound paint confirming to MOST specified painting as per manufactures specification / directions, mechanically applied to form 1.5mm thick film on road limit including cleaning and drying the existing dust oil, grease and moisture free surface before applying paint complete all as specified and directed.

Dismantiling floor, hearth or wall tiling including cement mortar bedding but not backing and rubbish off the premises complete all as specified and directed.

M&L for fully vitrified tiles 9 to 10 mm thick, double charge in light shade, (Square/rectangular), area of each tile not exceeding 0.82 sqm, in floors etc. set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed

M&L for Ist quality glazed ceramic designer coloured tiles, 7 to 8 mm thick area of each tile not exceeding 0.36 sqm on vertical surface as in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over & including 10mm thick rendering in CM 1:4 complete all as specified and directed

M&L for Ist quality glazed ceramic designer coloured tiles of size 450x300x7-8 mm thick on vertical surface as in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and directed.

M&L for Ist quality glazed ceramic designer coloured tiles of size 600x300x7-8 mm thick on vertical surface as in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and directed.

Dismantling wall and ceiling board with frame work of ceiling (Fibre,pulp,insulation etc.) or insulation board /slab/blankets any thickness including cover fillet etc complete all as specified and directed.

S&F powder coated Gl frame work for ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers rod of 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including 9 to 10 mm thick gypsum ceiling tile/board of size 600 x 600mm decorative type with silver foil coating on back side of ceiling board for insulation and accoustic purpose, adjustable arrangement & washers etc complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar etc complete all as specified and directed.

M&L for 18 to 20mm thick granite over cooking platform, shelves, window cills etc machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixtur of pigment to match the shade of granite stone including grinding, moulding and polishing and beveling half round edges of stones laid over & including 20 mm thick sereed bed in CM (1:6) complete all as specified and directed.

M&L for 18 to 20mm thick granite on vertical surfaces as in pillars, skirting, dados etc set and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone and bevelling half round edges of stones fixed over and including rendering 10 mm thick in CM (1:3 ) complete all as specified and directed.

Cutting openings, through brick walls built in cement mortar, for door, windows and other openings or enlarging existing openings, converting window into door openings, etc. including providing, fixing and removing shoring, cleaning stacking bricks, removing surplus serviceable bricks,hard core, etc. to store and rubbish off the premises not exc.50 mtr. complete all as specified and directed .

Taking down chowkhats or frames n.exc 1.5 sqm (without taking off shutter from the frame) each and removing from the site including making good the disturbed surface complete all as specified and directed.

Taking down chowkhats or frames Exc 1.5 sqm but n.exc 4 sqm (without taking off shutter from the frame) each and removing from the site including making good the disturbed surface complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but n.exc 2.00 Sqm each complete all as specified and directed.

S&F IInd class hard wood plain, solid, straight, chowkhat and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at joints complete all as specified and directed

S&F in repair 40 mm thick flush shutter, solid core construction with block board core and ply wood face panels, commercial type on both side, complete all as specified and directed.

M&L for Melamine polishing on wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats etc complete all as specified and directed .

S&F 100 mm size cast brass with mild steel hinge pin bright polished and fixed, type B-11 fixed/ welded to frame complete all as specified and directed.

S&F 200 mm long,brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts etc complete all as specified and directed.

S&F 300mm long brass, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F brass handles cast type 150mm size complete all as specified and directed.

S&F 150mm long Floor door stopper of brass body and anodised , with hard drawn steel spring. Fixed in floor complete all as specified and directed.

M&L for aluminum alloy powder coated (50 micron) anodised door frame of section 100 mm x 44 mm x 2mm thick,door shutter of aluminum section of size 85 mm x 44 mm x 2mm thick, top rail and both styles of size 100mm x 44 mm x 1.6mm thick, lock rail and bottom rail of size 150 mm x 44 mm x 1.6 mm thick including aluminum anodized snap beading and rubber packing & 5.0 mm thick colour designer glass complete all as specified and directed.

S&F powder coated aluminium window shutters of aluminium section of size for all member 47.50x44.40x1.60mm thick with chowkat made out of hollow aluminium section size 63.5x38.10x1.60mm thick suitable for aluminium shutter and aluminium guard bar each shutters having two Nos aluminium hinges 100mm long, 100mm size aluminium handle and two nos 150mm long aluminium tower bolt and glazing with 4.8 mm thick sheet glass ordinary quality in square exceeding 0.5 sqm each pane coloured and fixed with glazing clips/ pins rubber beading and aluminium beading etc complete all as specified and directed.

M&L aluminium alloy powder coated (50 micron ) anodized frame as in aluminium partition including aluminium anodized snap beading and rubber packing complete all as specified and directed .

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed etc complete all as specified and directed.

S&F in repair aluminum alloy door closer hydraulically regulated, desination No 2 universal type, suitable for door shutters of 701 to 850mm in width and weight between 36 to 60 Kg and fixed to door frame complete all as specified and directed.

Hacking out old broken glass (any thickness) size quality or description from wooden/steel frame etc complete all as specified and directed.

S&F 5.00mm thick tinted glass with glazing clips rubber beading and aluminium beading for aluminium door /window area exc 0.5 sqm complete all as specified and directed

S&F 5.00mm thick tinted glass with glazing clips rubber beading and aluminium beading for aluminium door /window area n.exc 0.5 sqm complete all as specified and directed.

S&F in repair 12mm thick prelaminated particle board with glazing clips rubber beading /gasket and aluminium beading for aluminium door complete all as specified and directed.

S&F in repair any size brass mortice lock four levers with duplicate key for aluminium door , complete all as specified and directed.

S&F in repair wooden flooring of 8mm thick size 1216x192mm with interlocking pannels with plastic and silicate mixture as the core material and surface with PVC foil on the top with thickness of 10mm width of 200mm and length of 2.74/3.05 (9'x10') meters , small embossed surface with glory finishas per manufacturer instruction including taking down old wooden flooring complete all as specified and directed.

S&F in repair L/H/U profile and corner profile molding with fillet at top ,bottom and corner to hold the wooden flooring and wall panelling with exactly the same shade as that of the flooring planks as per manufracturer instruction complete all as specified and directed.

S&F in repair 10 mm thick toughened frosted glass door with side & Tops glass fixed with openable door , comprising of height 2100 mm and width 1000 to 1200 mm ( as required at site) with pivot door of appropriate width including stainless steel chrome finish hardware fitting , floor machine and all fittings as required including and fixture as per manufacturer's instructions complete all as specified and ditrected.

S&F in repair toughened frosted glass 12mm thick fixed on wall with clits /Aluminium frame including fixing acessories complete all as specified and directed.

S&F in repair rolling vertical veniation blind consisting of aluminium head rail, of approved tint and traverse cord fixed in position complete all as specified and directed.

S&F in repair double rolling vertical veniation blind consisting Flip cover of aluminium head rail, of approved tint and traverse cord fixed in position complete all as specified and directed.

S&F in repair vertical venetian blinds consisting of aluminium head rail vanes/ louvers of 100 mm wide of approved tint and traverse cord fixed in position complete all as specified and directed.

Supply and fixed Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick wood grain printed PVC sheet reinforced with M.S. Square tube, suppling and fixing in opening as per specification & drawing shown in SSR etc complete all as specified and directed.

S&F Factory made solid panel PVC wood grain printed door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat molded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side &as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to gathers with solvent cement supplying & fixing the frame at site etc complete all as specified, shown in SSR and directed.

S&F mild steel butt hinges 100 mm long medium weight cold ralled complete all as specified and directed.

S&F aluminium anodised extruded fabricated type handle 150mm long complete all as specified and directed.

Supply & fixing Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 250 mm long and fixing with bolts extruded sections complete all as specified and directed.

S&F 200 mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

Taking down of Aluminium door/window shutter of any description area of each shutter not exceeding 1.5 sqm and refixing in same opening after carry out necessary repair including oiling, tightening the joints/bolts , fixed to floor spring / hinges, rubber beading, aluminum beading, handles, sliding bolts, hinges, tower bolts etc complete all as specified and directed. NOTE: i) Floor spring to be paid under relevent Item of BOQ. ii) The rates for T&P required for repair including fixing of rubber packings, screws etc complete to make good the shutter as directed are deemed to be included in the quoted rates.

All as per item Ser No 84.00 above but area exceeding 1.5 sqm and n exc 4.00 sqm each shutter.

Repair only collapsible gate, of any size, any description, in any position, by easening greasing repair and welding of cross channels,bottom & top running wheel including taking down and refixing in same opening complete all as specified and directed.

S&F in repair double legged door stopper of aluminium alloy with rubber base, 150mm long complete all as specified and directed.

S&F in repair Collapsible steel gates, top hung, consisting for channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., erected in position and securing runners with holdfasts and brackets including taking down old collapsible door ,complete all as specified and directed

S&F in repair powder coated anodised aluminium frame / shutter frame for door, window,ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and directed.

Easing of door shutters of size n.exc 1.5 Sqm each for easy closing/opening and tightening of hinges or changing the position of hinges, adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed.

Easing of window shutters, kitchen cupboard shutters, show case shutter drawers up to size of 1.5 sqm including fixing of screws adjusting handles, knobs tightening piano hinges including misc small adjustments complete all as specified and directed.

All as per item ser No 91.00 above but for steel windows repair by welding, filing etc. complete work for smooth closing/opening of windows

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples or including wooden beading & necessary welding to steel windows complete all as specified and directed.

S&F in repairs sheet glass 3 mm thick ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane including hacking out old broken glass any thickness complete all as specified and directed.

M&L for 19/20mm thick prelaminated particle board interior grade prelaminated on both sides with decorative choice lamination fixed with screws to timber framed work including dismantling of old unserviceable boarding any description complete all as specified and directed.

S&F in repair continuous (Piano) hinges, mild steel bright finish or electro galvanised (width of flap when open 30 mm) complete all as specified and directed.

S&F in repair 30 mm dia, cupboard knobs fancy type fixed with nutscrew and washer of mild steel, bright finished complete all as specified and directed.

M&L for removal of plant growth by injection with chemical glyphosphate solution (4 % concentration) @ 20 ml or till refuse by cutting or injection in stem of plants or roots at 30 mm. The area shall then be sprayed with solution 25 ml glyphosphate (4% conc) diluted with 1 ltr of water. The size of bldg shall be of vary in of each floor and vary in number of floors. All roots of plants shall be removed completely and making good the disturbed surface and painted with cement base or acrylic paint complete all as specified and directed.

M&L for Water proofing treatment over roof at any height consisting evenly applied bitumen primer coat @ 0.30 litre/ Sqm on surfaces,Applying evenly a tack coat of bitumen @1.20 Kg /Sqm and a layer of APP polymer 3 mm thick even membrane weight not less than 3.00 Kg/ Sqm duly sealed at over laps joints with flame (complete by torch application) again applying a coat of bitumen @1.20 Kg /Sqm on the top of APP all as per manufacturer's instructions, including taking out old roof treatments complete all as specified and directed. Notes:- (i) Application of polymeric membrane shall be by torch application. (ii) The over lap shall be minimum 100 mm on transverse direction and 75 mm in longitudinal direction. (iii) Primer shall be applied after preparing & cleaning of fully dried cement plastered surface.

BLANK

M&L for draining out water, cleaning by removing silt/sludge, all scales, dust from RCC/AC/PVC water storage tank exceeding 500 ltres and not exceeding 2000 ltres capacity from mouth of circulating pipes and writing letters of height not less than 10 cm with white synthetic enamel paint such as date, month & year of cleaning including removing old waste/dust complete all as specified and directed.

M&L for welding in repairs to hinges of steel window/pressed steel door and making good for opening of doors/window shutters thickness of metal to be welded exc 6 mm but n exc 9 mm complete all as specified and directed.

M&L for welding in repairs to steel ladder of various guard post /watch towers and making good thickness of metal to be welded exc 6mm but n-exc 9mm complete all as specified and directed.

M&L for Welding in repairs exc 2.5 cm but n.exc 5 cm in length and making good thickness of metal to be welded exc 6mm but n-exc 9mm complete all as specified and directed.

M&L for treatment of soil under existing floor /plastering wall using chemical emulsion @ 0.5 ltr per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floor complete all as specified and directed.

M&L for treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based emulsion) @ 0.5 ltr per hole by drilling 6mm dia holes at a downward angle of 45 degree and sealing the same complete all as specified and directed.

S&F in repair stainless steel plate rack of size 900x750x250mm and design as approved made out of 1.00mm thick stainless steel sheet complete all as specified and directed .

S&F in repair aluminium anodized partition wall or fixed type window/ventilator made out of aluminium anodized standard hollow section 100x40x1.60mm thick snap fit beading standard rubber gasket 5.5mm thick glass or 12mm thick prelaminated particle board , interior grade prelaminated both side with decorative choice lamination & other side balancing light grey lamination including taking down old partion wall etc complete all as specified and directed .

M&L for oil based putty for securing glass to wooden beads or steel frame including removing old putty, cleaning the surface etc complete all as specified and directed.

S&F in repairs extruded aluminium alloy handles, fabricated type, anodised 125 mm size complete all as specified and directed.

M&L in repairs aluminium sheeting 1.00 mm thick fixed to wooden shutters or crumpled joint with self CP screw including cutting to required size upto G+6 floor etc complete all as specified and directed.

M&L for repairs to MS rolling shutters, of size exc. 10 sqm with ball bearing, manual type operated, easening with welding if required, replacing defective or unserviceable parts as necessary to make it fully functional including taking down and refixing in same opening and painting with two coats of synthetic enamel paint all over complete all as specified and directed. Note :- Defective parts to be replaced shall be measured and paid separately under respective item of BOQ as supply only.

Supply only for mild steel spring for rolling shutters exc 10 Sqm including dismantling old unserviceable complete all as specified and directed.

Supply only for mild steel anchor rod for rolling shutters exc 10 Sqm including dismantling old unserviceable complete all as specified and directed.

Supply only mild steel ball bearing for rolling shutter exc 10 Sqm including dismantling old unserviceable complete all as specified and directed.

Supply only mild steel gear box and crank handle for rolling shutters exc 10 Sqm including dismantling old unserviceable complete all as specified and directed.

BLANK

Taking down shutters of any description exc 1 sqm but n.exc 2.00 Sqm each complete all as specified and directed.

Demolition of brick work or stone / boulder masonry, built in cement mortar incl all quoins, arches, pillars etc but excluding ashlar facing dressed stone work & precast concrete articles complete all as specified and directed.

M&L for brick work with sub-class 'B' bricks straight or curved on plan exc. 6M mean radius built in cm (1:6) complete all as specified and directed.

All as per item ser No 116.00 above but except bricks. Note : old serviceable bricks retreived from Srl item No. 115 shall be reused

Taking down cement plaster on brick or stone walls incl raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces to be finished even and smooth with out using extra cement in CM 1:4 complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of alkali resistent primer complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coats of acrylic emulsion paint over 2mm thick wall care putty (each coat min 1mm thick) complete all as specified and directed.

M&L for PCC 1:2:4 type B-1, (using 20mm graded crushed stone aggregate) as in coping including water trough and the like weathring, slightly rounded or chamferred angles and throating including formwork complete all as specified and directed.

Demolition of cement concrete n exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1, (using 20mm graded crushed stone aggregate) as in surface channel & drain complete all as specified and directed.

Taking down barded wire including concertina coil etc complete all as specified and directed.

S&F 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, incl securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc (each line wire to be measured) complete all as specified and directed.

S&F in repair galvanised steel concertina coil fencing with punched tape, 730mm dia, having 50 Nos rounds per 6m length, complete all as specified and directed.

Demolition of reinforced cement concrete in ground floors and powing n.exe 15 cm thickness (below or above ground level), drain covers, manhole covers etc complete all as specified and directed.

S&F Factory made precast heavy duty drain/ manhole covers including MS frame and including reinforcement as per IS 12592 : 2002 with specified thickness complete all as specified and directed.

M&L for cleaning of storm water drains by removing mud, grass etc and sweeping the sides and botton of drains in foul condition complete all as specified and directed.

M&l for removing excavated demolished material to a distance exc 250 M but N exc 500 M and depositing were directed complete all as specified and directed.

M&L for PCC (1:4:8), type D2 (using 40 mm graded stone aggregate) as in foundation, filling, mass concrete and sub base of floor complete all as specified and directed.

M&L for coloured chequred cement concrete. tiles 30cmx30cmx25 mm thick jointed and pointed in neat cement slurry in floors with grey cement and pigment laid over & including 20mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F for Fe-410-W (Gde E-250 ) quality B Joist, channel, angle or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and directed.

S&F Mild Steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; wall ways; railings; framework of water tanks and similar work con-forming to Fe.290. Gde-E-165 complete all as specified and directed.

M&L for preparation of new steel and iron surfaces exc 10 cm in width or girth and applying two coats of synthetic enamel (ordinary tint ) paint over a coat of red oxide/zinc chrome primer complete all as specified and directed.

M&L for Sand filling under Machine pressed precast concrete interlocking paver block of any description including watering and consolidation complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 with grey cement and pigment of 60 mm thickness, M-35 grade complete all as specified and directed.

S&F MS framed work as in doors or gate of angle or other section with gusset plates rails braces etc complete drilled for fixing of steel sheeting or other covering door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting and hanging also fastening and fixing complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness complete all as specified and directed.

S&F 1.60 mm thick MS plain black sheet in steel gates etc cut to size, holes punched including screw clout nuts, revieted and welding etc complete all as specified and directed.

S&F in repair sensor kit with battery for sensor type usual pot of size 75x50mm for proper functining complete all as specified and directed.

m/s Kailash Chander

V M CONSTRUCTION