Civil and Electrical renovation works at Administrative Building of BTPS.

Amount

CIVIL PART:

Cement concrete with graded stone ballast (40 mm size excluding shuttering) in ground floor. (A) [Pakur Variety] (a) 1:3:6 proportion.

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge.

Neat cement punning about 1. 5mm thick in wall, dado, window, sills, floor, drain etc. Note:-Cement 0. 152cum per 100sqm.

Brick work with 1st class bricks in cement mortar (1:6) (a) In Super Structure.

125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface]. i) With 1:6 cement mortar a) 15mm plaster.

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface thoroughly, complete as per manufacturer' s specification and as per direction of the EIC. (In Ground Floor)/a) One Coat/i) Water based interior grade Acrylic Primer.

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) :(Two coats)/i) Standard Quality

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface thoroughly, complete as per manufacturer' s specification and as per direction of the EIC. In Ground Floor:(a) One Coat

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer' s specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat)/b) Premium 100% Acrylic Emulsion.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16-gauge black annealed wire at every intersection, complete as per drawing and direction. (a)For works in foundation and up to roof of ground floor/up to 4 m.

Ordinary Cement concrete (mix 1:1. 5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Variety.

Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27. 5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in ground floor:(a) 35mm thick shutters (single leaf)

Supplying fitting & fixing in position 10-15 micron anodised 40 series aluminium sliding windows/ventilator as per drawing & specification made of ISI approved heavy duty extruded sections & shutters fitted with 4mm thick bubble free tilted float glass wit.

Cleaning the walls and ceiling by scraping, sand papering and Smoothening down the surface including putting.

M. F. suspended ceiling made with 12. 5 mm thick Gypsum plaster board including G. I. perimeter channel of 0. 55 mm flush (having two flanges 20 mm and 30 mm respectively and web 27 mm) along with perimeter of ceiling with G. I. intermediate channel of 0. 9 mm thick size 45 mmx15mm placed at 750 mm c/c with G. I. ceiling angle of size 25 mmx10mmx0. 55 mm thick fixed to the ceiling with G. I. Cleat and steel expansion fastener ceiling section 0.55 mm thick of size 51. 50 mmx26mm fixed to the intermediate channels with the help of connecting clip and in the direction of perpendicular to the intermediate channel of 300 mm c/c 12. 5 mm thick Gypsum plastered board are to be fixed under ceiling section as above by machine screws. The boards are to be joined and finished with jointing compound, paper tape and application of top coat etc. as per the direction of Engineer-in-charge. (The rate includes of cost of all materials including taxes, cost of accessories, fittings and fixtures, scaffolding and labour charges etc. complete) In ground floor.

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary/(a) On timber or plastered surface :/With super gloss (hi-gloss) -/(iv) Two coats (with any shade except white).

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary//(b) On steel or other metal surface: With super gloss (hi-gloss) -(i) Two coats (with any shade except white)

Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand. (1. 5 mm thick)

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame excluding cost of concrete, Iron Butt Hinges and M. S clamps. (The quantum should be corrected upto three decimals)

Removal of rubbish, earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal/ Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge.

Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar 1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2. 91Kg. /sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1. 75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer' s specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr]e) I (I) With application slurry @1. 75 kg/ Sq. m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0. 2 kg/ Sq. m white cement for joint filling with pigment. /(A) Deep Colour & White

Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1. 75 kg/sq. m all complete including all materials and labour. In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). (i) 20 mm. thick

Supplying, fitting & fixing true to line and level digital elevation Ceramic tiles of approved brand conforming to IS:15622:2006 Group B III and tested as per IS:13630:2006 as ornamental cladding on external wall in natural stone, brick, wood, bamboo pattern/ design fixed with adhesive 4. 5 mm thick at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. With polymerised adhesive and epoxy grout pointing including spacer - 2mm (When tiles are laid over existing hard ready surface) all complete as per direction of Engineer-in-charge. /Add extra for each addl, floor over the rate for Ground Floor.

Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [Excluding the cost of supporting frame work and teak wood batten/Lipping] In Ground Floor (I) 12mm

Supplying fitting, fixing decorative lamination conforming to IS: 2046: 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge. The rate includes the cost of labour, adhesive and all incidental charges thereof. In ground floor; Glossy/Matt/Suede excluding surface texture or metallic lustre. (i) Thickness of laminate 1. 5mm.

Supplying, fitting and fixing Auto hinge.

Supplying, fitting and fixing full decorative 6 inch S. S Handle

Supplying, fitting and fixing full decorative 10 inch S. S Handle.

Supplying and fitting fixing wall wooden paneling by 12 mm ply and finish by 3 mm-4mm veneer with Polyurethane Polishing to woodwork Polyurethane Polishing to woodwork with required colour as approved by Engineer-in-Charge with preparing surface including scaffolding and hire charges of compressor machine including cost of filler and hardener material such as P. U. Sealing, P. U. Top coat (Matt/Glossy), Thinner, Spirit etc. and inclusive of all operation, material and labour complete as per direction of Engineer-in- Charge .

Supplying fitting and fixing of vertical blind.

Acoustics Treatment in wall paneling: Supplying and fixing wall paneling which includes stud section (0. 55 mm thick having web of 70 mm, unequal flanges of 36 mm and 34mm made of GI sheet) placed horizontal /Finally the boards are to be jointed and finished so as to have a flush look which includes fitting and finishing the tapered and tapered and square edges of the boards with jointing compound. joint paper tape and two coats of drywall topcoat suitable for.

Supplying, fitting and fixing boiling water proof block board conforming to IS:1659-1990 conforming to IS:848-1974 of approved make and brand, fitted and fixed as per design as per direction of Engineer-in-charge. [Excluding the cost of supporting frame work and teak wood batten/Lipping]. In Ground Floor/(ii) 19mm.

TOUGHNED GLASS CLADDING -12MM THICK Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987 . xiv) 12mm thick coloured / tinted / toughened glass conforming to IS:2553-1992 (Part-II).

FABRIC PANELLING (Pinup/soft board) Providing and fixing of fabric paneling made of 10mm thick acoustic husk board, sample as approved by the Engg- in charge and wrapped with approved shade of fabric and fixed to existing partition/paneling all as per direction of the Engg-in-charge.

Wall paper Providing and fixing of wall paper on existing partition/paneling approve adhesive as per details technical characteristics : with approx. 130cm(50/51-51/52 inches) technical value light fastners all group 7, test according to ISO 105, fire classification class-I - class0 adhesive only use manufactures specified adhesive. A. S. creation/Elemento make.

Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Stainless steel pipe and base/cover plate with Stainless Steel GRADE 304 containing 7. 5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Stainless Steel railing per metre 6.5 Kg (approx).

French polishing to wood work including preparing surface(ordinary gloss)/(b) On old French polished surface including complete removal of the old polish.

Polyurethane Polishing to woodwork Polyurethane Polishing to woodwork with required colour as approved by Engineer-in-Charge with preparing surface including scaffolding and hire charges of compressor machine including cost of filler and hardener material such as P. U. Sealing, P. U. Top coat (Matt/Glossy), Thinner, Spirit etc. and inclusive of all operation, material and labour complete as per direction of Engineer-in- Charge.

Supplying ' Godrej' mortice lock chromium plated with keys 6 levers including fitting & fixing complete.

Door stopper - Brass.

Scraping of moss, blisters etc. thoroughly from exterior surface of walls necessitating the use of scraper, wire brush etc. (Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge).

Supply and fitting & fixing Wall mounted cascade type closet with all system.

Mirror Paneling Providing & fixing 6mm thick frame less beveled (25mm) edge mirror fixed with mirror compatible double sided adhesive tapes (3mm make make mirror tape) or with mirror compatible adhesive (use only neutral binding agent such as Alkoxy silicone or oxime silicone) as per the manufacturer commendation on 19 mm thick marine ply fixed to wall including sealing the edges or mirror with neutral silicone to protect the backing paint from damage as per manufacturing specification & installation guidelines complete in all respect as per details.

Wash basin Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C. I. brackets on 75mmX75mm wooden blocks, C. P. waste fittings of 32 mm dia, one approved quality brass C. P. pillar cock of 15 mm dia, C. P. chain with rubber plug of 30mm dia, approved quality PVC waste pipe with C. P. nut 32mm dia 900 mm long approved quality PVC connection pipe with heavy brass C. P. nut including mending good all damages and pointing the brackets with two coat approved paint. 630mmX450mm size 610X390X310 mm having pre & post flushing with water (250ml & 350ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge model; Parryware make. 15mm normal bore.

IR sensor operated urinal Supplying fitting & fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610X390X310 mm having pre & post flushing with water (250ml & 350ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge model; Parryware make. 15mm normal bore.

Long body sensor faucet supplying fitting and fixing Jaquar long body sensor faucet.

Supplying fitting and fixing health faucet with 1mtr. Flexible.

Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid separately). (i) 450 mm X 350 mm

Supplying, fitting & fixing granite slab 15mm to 18mm thick in floor, lobby, stair, landing and treads etc. over 20mm (avg) thick base of cement morter (1:2) laid with white cement slurry @ 4. 40Kg per Square meter before placing of granite and jointed with white cement slurry @ 2. 0 Kg per square meter with necessary pigments and complete as per direction of Engineer-in-charge including cost of all materials, labours, curing and roughening of concrete surface complete. In ground floor. (b) Area of each Granite slab 0. 6 to 1. 0 Square meter.

Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75m. In ground floor including roof. (a) upto 150 mm. thick.

Dismantling R. C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75m. including stacking of steel bars. in ground floor including roof.

Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. a) In ground floor including roof.

Supplying, fitting and fixing towel rail with two brackets. (a) C. P. over brass (iii) 25 mm dia. and 750 mm long

Supplying, fitting and fixing porcelain soap tray of approved make. (i) Recessed soap tray of size 150 mm X 150 mm

Supplying, fitting and fixing shower of approved brand and make. Hand Shower (Health Faucet) with 1mtr Fexible Tube with Wall Hook (Equivalent to Code No. 573 & Model ALLIED of Jaquar or similar).

Full extension ball bearing slides channel at drawer & key Board.

Miscellaneous jobs not covered by above mentioned item (Payment will be made As per PWDSOR (Bldg.) w. e. f 01/11/2017 up to 14th corrigendum w. e. f 08/03/2021 and PWDSOR(S&P) w. e. f. 01/11/2017 up to 7th corrigenda dtd-22/01/2020.

ELECTRICAL PART:

Supply installation of ceiling mounted 48" Fan with electronic regulator.

Supply installation of wall mounting type 15" dia Fan.

Supply installation of 12" dia Exhaust Fan of Crompton make including lubber type canopy made of GI.

Supply installation of 15 Watt Duraslim Light.

Supply installation of 15 Watt Wiz Downlight.

Supply installation of 12 Watt WIZ Cob.

Supply installation of 6 Module Switch Board.

Supply installation of 4 Module Switch Board.

Supply installation of 2 Module Switch Board.

Supply installation of LAN Port.

Supply installation of Intercom Port.

Supply installation of 5 Amp Switch & Socket.

Supply installation of 20 Amp Switch & Socket

Electrical wiring by copper cable (2 x 1. 5 + 1x 1. 0 Sq. mm.) through PVC pipe/ casing.

Electrical wiring by copper cable (2 x 2. 5 + 1x 1. 0 Sq. mm.) through PVC pipe/ casing.

Electrical wiring by copper cable (2 x 4. 0 + 1x 1. 0 Sq. mm.) through PVC pipe/ casing.

Electrical wiring by copper cable (2 x 6. 0 + 1x 1. 0 Sq. mm.) through PVC pipe/ casing.

Supply installation of 1 inch PVC pipe.

Supply installation of 12 way SPN MCB-DB

Laying of 1 inch PVC pipe properly.

Supply installation of 20A socket and AC Starter.

INSTALLATION OF AIR CONDITIONING SYSTEM:

Supply installation of 2TR capacity Cassette type Conditioning machine.

Supply installation of 3TR capacity Cassette type Conditioning machine.

GST (CIVIL, ELCETRICAL & AIR CONDITIONING PART)