MECHANICAL DREDGING WORK AT FORE BAY AND OTHER CIVIL WORKS OF INTAKE PUMP HOUSE

Assembling & commissioning of dredger: Assembling & commissioning of dredger on the river bed for one seasons including the cost of all labour, fuel, consumbles, nuts, bolts, gascats & tools, tackles etc. complete as directed by Manager-In-Charge

Assistance for operation of dredger : Assistance for operation of dredger including the cost of recording of log book, all labours, fuel, lubricant & tools & tackles etc. complete as directed by Manager-In-Charge

Minor maintenance of dredger : Minor maintenance of dredger including all labours, consumbles nuts & bolts, grease, gascats & tools tackles etc. complete as directed by Manager-In-Charge

Disassembling the dredger : Disassembling the dredger at the end of the working seasons, cleaning, painting & proper storing of the dredger components in the dredger shed including the cost of labours, painting materials & tools tackles etc. complete as directed by Manager-In-Charge

Deployment of mechanical excavator : Deployment of mechanical excavator PC-200/220 or equivalent for miscellaneous works like Dozing, spreading, levelling earth, debris, sand, house keeping debris or cutting of sand for making channel inside river including cost of operator, fuel, tools & tackles etc., all complete as per the direction of Manager-In-Charge

Transportation charges of excavator : Transportation charges of excavator PC-200/220 or equvalent from any distance including cost of Troller if required, Pilot, Helper, loading, unloading & transportation in each way, tools & tackles etc., all complete and as per the direction of Manager- In-Charge

Earthwork in excavation : Earthwork in excavation of foundation trenches drains including dressing of sides & ramming of bottoms, lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil, as directed, in all types of soil including hard soil

Earthwork in excavation over areas : Earthwork in excavation over areas, including disposal of excavated earth, lead upto 100 m and lift upto 1.5m disposed earth to be levelled and neatly dressed, in all types of soil including hard soil.

Making channel in sand/sandy : Making channel in sand/ sandy soil in river bed in dry or wet condition or within the water flow including removing the sand for directing the flow, as desired.

Supplying & filling in plinth : Supplying and filling of Sand not exceeding 200mm thick in each layer including watering, ramming, compacting, leveling, dressing etc. complete as per drawings, specifications and direction of Manager-in-charge.

Filling available excavated earth : Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20cm in depdth consolidating each deposited layer by ramming and watering lead upto 50m. & lift upto 1.50m

Surface dressing : Surface dressing of the ground including removing, vegetation & inequalities not exceeding 15cm deep & disposal of rubbish lead upto 50m & lift upto 1.5m in all types soil etc

Cleaning grass & removal : Cleaning grass & removal of the rubbish upto 100m outside the periphery of the area cleaned or firing the rubbish as required by CISF personnel

Cleaning of jungle including uprooting : Cleaning of jungle including uprooting of rank vegetation, grass, brush wood, trees & sappling etc. and removal of rubbish upto a distance of 50m outside of the periphery of the area cleaned, including cutting of trees etc. in road side berms

Uprooting of small trees & roots : Uprooting of small trees & roots from the existing bldg./ structures/ walls/ drain/ floor etc. including partial dismantling and mending good 10mm & down size chips, plastering 1:4 & finished smooth.(measurement shall be taken up for concrete & plaster separately for payment ).

Collecting sand from river bed : Collecting sand from river bed & filling into empty cement bags & duly tied up.(capacity of the bag should not be less than 1 cft.) for dumping in river bed for diverting the flow, excluding the cost of empty cement bags. Payment shall be made as no of bag basis)

Cleaning of Intake chamber : Cleaning of Intake chamber in Intake pump house which is 16.5mtr. below ground level and removal of slush/silt/sand/ other deposition etc.& taking out the same and disposal of the same within a lead of 50mtr. etc. including dewatering the sumps with supply of pump sets & other tools & plants,safety equipment etc. required for the work

Cleaning of open masonry drains & cul : Cleaning of open masonry drains & culvert etc. including removal of vegetation, slush soil, garbages, loose stones & earth deposited & disposal of the same within 50 Mtr

Cleaning of Hume pipe culvert: Cleaning of Hume pipe culvert & in the river Nandira including removal of chockages(partly or fully) complete, as and when required

Removal of slush/deposits: Removal of slush/ deposits of ash & depositing the same at a distance of 50mt. properly stacked.(measurement will be taken as per stack measurement)

Cleaning & sweeping of floor : Cleaning & sweeping of floor including necessary removal of the garbage to the area within a lead of 50mtrs. as per instruction of MIC

Cutting of felling trees/branching : Cutting of felling trees/ branching of trees & removal of debries to the area within a lead of 50m as per instruction of MIC

P/L P.C.C. (1:2:4) using 20mm : Providing & laying of PCC 1:2:4 using 20mm & down aggregates at any level, in proportion, 1cement :2 coarse sand: 4 stone aggregates excluding centring & shuttering etc. (Cement shall be issued free of cost at Nalco's store.)

P/L P.C.C. (1:3:6) using 20mm : Providing & laying of PCC 1:3:6 using 20mm & down aggregates at any level, in proportion, 1cement: 3 coarse sand: 6 stone aggregates excluding centring & shuttering etc. (Cement shall be issued free of cost at Nalco's store.)

Supplying Unskilled labour Male/female : Supplying Unskilled labour Male/female Collies. labour for miscellaneous nature of works including necessary tools and tackles etc.

Transporting from iron/wooden door,wind : Transporting from Nalco CPP & fixing in position iron/ wooden door, windows ventilators, gates etc. complete. (concrete & plastering shall be paid separately)

C/B/P Steel reinforcement for RCC work : Bending/ binding and placing in position tor steel reinforcement for RCC work including straightening, cutting, bending to required shape, binding with contractor's own binding wires with proper cover blocks, supports, chairs, spacers etc. at all depth and heights including transportation, loading and unloading etc. all complete as per specification and direction of MIC.(Steel reinforcement shall be issued free of cost at Nalco's store.)

Brick work In Foundation : Brickwork using fly ash brick in foundation and plinth in C.M 1:6 (1 cement :6 coarse sand) complete including curing etc as directed by M-I-C.(Cement and Fly ash brick will be provided by NALCO free of cost at its main store and brick manufacturing unit)

Brick work In superstrusture : Brickwork using fly ash brick in superstructure in CM 1:6 (1 cement :6 coarse sand) complete including curing etc as directed by M-I-C. (Cement and Fly ash brick will be provided by NALCO free of cost at its main store and brick manufacturing unit)

Providing C.M. 1:6 (12 mm thick) : Providing cement plaster 1:6 (12mm thick) in coarse sand with cement mortar at all elevation including supply of all labour scafolding materials etc. for repair & new works excluding cost of cement complete. (Cement shall be issued free of cost at Nalco's store.)

Providing C.M. 1:6 (15 mm thick) : Providing cement plaster 1:6 (15mm thick) in coarse sand with cement mortar at all elevation including supply of all labour scafolding materials etc. for repair & new works excluding cost of cement complete.(Cement shall be issued free of cost at Nalco's store.)

Neat cment punning : Providing neat cement punning etc. complete for all heights.(Cement shall be issued free of cost at Nalco's store.)

Providing cement concrete flooring 1:2:4 : Providing cement concrete flooring 1:2:4 finished with a floating coat of neat cement punning, rounding of edges & strips,glass strips etc. excluding cost of cement complete for 40 mm thick with 20mm nominal size chips.(Cement shall be issued free of cost at Nalco's store.)

Providing RR stone masonry : Providing RR stone masonry in CM 1:6 using hard stone boulder in Foundation & plinth superstructures whereever required including scafolding etc. complete excluding cost of cement, including levelling course in C.C 1:6:12.(Cement shall be issued free of cost at Nalco's store.)

Flush pointing : Flush pointing with 1:3 Cement mortar over stone pitching/ brick work. (Cement shall be issued free of cost at Nalco's store.)

Providing coping : Providing coping on top of compound wall with C.C 1:2:4 with 10mm nominal size granite chips, thickness 50

mm, with inserting of broken glass pieces etc. complete, excluding cost of cement as per instruction of MIC.(Cement shall be issued free of cost at Nalco's store.)

Dismantling and disposal of brickwork : Dismantling and disposal of brickwork within 100M lead including stacking and cleaning the area all complete

Dismantling and disposal of Plain cement : Dismantling and disposal of Plain cement concrete within 100M lead including stacking and cleaning the area all complete

Dismantling and disposal of reinforced c : Dismantling and disposal of reinforced cement concrete within 100M lead including stacking and cleaning the area all complete

Extra for cutting of reinforcement bars : Extra for cutting of reinforcement bars in RCC works (Payment shall be made on the cross sectional area of RCC wall) as directed by M-I-C

Dismatling of Plaster : Dismantling of Plaster including raking out joints

Removing of old tarfelting : Removing of old tarfelting/ painting & other insulations etc. from roof & wall including scrapping and cleaning the surface etc

Fixing in position new or old door/windo : Fixing in position new or old door/ window shutters, including minor adjustment to the existing choukath or to the shutter complete with all materials & labour but excluding the cost of shutter which will be suplied by Nalco free of cost

White washing with 1st quality lime : White washing with 1st quality lime on old surface (one or more coats) to give an even shade including cleaning, scraping, sand papering and smoothening of surface including repair to scratches, scaffolding etc complete for all height as per specification and direction of MIC.

Water proofing cement paint : Finishing walls with water proofing cement paint of approved brand "Snowcem plus" or equivalent of required shade (one or more coats applied @ 2.20kg/10sqm) including washing, scraping, sand papering and smoothening of old surface including repair to scratches, scaffolding etc complete for all height as per the specification and direction of MIC.

Applying Red oxide zinc primer paint : Applying priming coat with ready mixed primer of approved brand and manufacture on steel work for all height complete (Red oxide zinc chromate primer).

Applying priming coat with ready mixed p : Applying priming coat with ready mixed primer of approved brand and manufacture on wood work complete

Synthetic enamel paint : Painting one or more coats with first quality synthetic enamel paint of approved brand & manufacturer specification for steel and wood work in all shades on old work to give an even shade including cleaning ,scaffolding etc complete for all heights as per direction of MIC

Lettering with black Japan paint : Lettering with black Japan paint of approved brand & manufacturer. Payment shall be made on per letter per centimeter height basis

D/S/ fixing with new barbed : Dismantling, supplying & fixing with new barbed 2 ply, 4 point GI wire in the fencing at any height

Lettering&painting of measuring scale : Lettering & painting of measuring scale inside the forebay wall along with necessary arrangment of boat & boat man & cost of all materials complete as per instruction MIC

Distempering in one or more coats : Distempering in one or more coats with 1st quality acrylic washable distemper ready mixed of Asian paint/ Akznoble Dulux / Berger or equivalent manufacturer of required shade and colour, as per manufacturer's specification including cleaning, smoothening, sand papering, closing all holes and depressions, scaffolding to all height etc complete as per the direction of MIC

Finishing walls with premium acrylic smo : Finishing walls with premium acrylic smooth exterior paint on existing surface of Asian paint/ Akznoble Dulux / Berger or equivalent manufacturer of required shade and colour (two or more coat applied @ 1.43 ltr/10sqm over and including priming coat of extirerior primer 2.20 kg/10 sqm) over existing surface including washing, scraping, sand papering and smoothening of old surface including repair to scratches, scaffolding etc complete for all height as per the specification and direction of MIC

Renewing glass panes with putty : Renewing glass panes with putty & nails whereever necessay with 4mm thick plain glass sheet in wood or steel doors, windows & ventilators etc

P/L Ceramic wall tiles : Providing and laying premium quality ceramic wall tiles make of "RAK, Kajaria, Somany" or equivalent in dado/ skirting etc. laid over 12mm average thick in cement mortar 1:3 finishing the joints cement including grinding the tiles at 45 degree for corner joints cleaning the surface with Oxalic acid etc. complete for all heights and depths as per specifications and directions of Manager-in-charge. (Cement shall be issued free of cost at Nalco's store.)

P/F Chequered precast tiles : Providing & fixing of chequered precast cement concrete tiles 22mm thick in footpath, approch road & courtyard jointed with with neat cement slurry mixed with pigment to match the sade of tiles including rubbing and cleaning etc. complete on 20mm thick bed of cement motar (1:4) one cement: 4 coarse sand with ordinary cement without any pigment including chipping, levelling, curing etc. complete as per direction of MIC.(Cement shall be issued free of cost at Nalco's store.)

P/L Ceramic floor tiles : Providing and laying of premium quality ceramic floor tiles 300x300 make of "RAK, Kajaria, Somany" or equivalent in floor etc. laid over 20mm average thick in cement mortar 1:4 finishing the joints cement including cleaning the surface with Oxalic acid etc. complete for all heights and depths as per specifications and directions of Manager-in-charge.(Cement shall be issued free of cost at Nalco's store.)

P/L Situ five course water proofing trea : Providing & laying in situ five course water proofing treatment with APP (Atactic Polypropylene) modifies polymeric membranes over roof consisting of first coat of bitumen primer @ 0.40Kg per Sqm,2nd & 4th courses of bonding material @ 1.20Kg/ Sqm which shall consist of blown type bitumen of grade 85/25 confirming to IS 702, 3rd layer of roofing membrane APP modified polymeric membrane 2.00mm thick of 3.00 Kg/ sqm weight consisting of five layers of pre-fabricated with center core as 100 micron HMHDPE film sandwiched on both the sides with polymeric mix and polymeric mix is protected on both the sides with 20 micron HMHDPE film .5th top most layer shall be finished with 12mm layer of cement mortar 1 :3 (1 Cement : 3 Fine Sand) with 2 % integral water proofing compound by wt of cement and finished neat as directed by M-I-C

S/F 40mm thick flush steel door : Supply and fixing of 40mm thick flush steel door with frame of approved profile "B" as per relevant IS code of 18 gauge joints mitred and welded with 15*3mm lugs 10cm long including applying a coat of approved steel primer (Zinc Chromate) both inside and outside including providing 12.5 cm butt hinge, peep hole of standard size with 6 mm thick plain glass with rubber seal in the rivetted area (shutter should be of APM design with 20 SWG CRCA) complete with all fittings like tower bolt, sliding door bolt and handles complete as specification and directed by M-I-C

P/F Steel windows ventilators : Providing and fixing steel windows, ventilators etc. openable type. (Top hung/side hung) glazing using I.S:1038 section as per drawing joints mitered and welded with 15mm x 6mm lugs, 100mm long @ 750C/C (max) suitably embedded in cement concrete of 1:1 1/2:3 (nominal mix) including providing and fixing 4mm thick plain glass panels as specification with aluminium beading fitted with nut & bolt, with approved make steel oxidized fittings and 12mm M.S. square bars at the rate of 100mm C/C painting with two coats of approved synthetic enamel paint of ISI or equivalent make over a coat of red oxide zinc chromate primer etc. all complete for all heights

Providing kiln seasoned chemically treat : Provi

ding kiln seasoned chemically treated hollock wood in frames /shutter(style,rail) of doors, windows etc. fixing in position of any shape and size including tools & tackles etc complete as per specification and direction of Manager-in-charge. (for repair work)

P/F flush door shutters : Providing and fixing 35mm thick ISI marked flush door shutters decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply vennering with vertical grains or cross bands and face veneers on both faces of shutters, including ISI marked stainless steel butt hinges with necessary screws, handles etc. complete.

R.C.C. (1:1.5:3) : Providing & laying of Reinforced cement concrete work 1:1.5:3 ( 1 cement : 1.5 coarse sand :3 stone aggregate 20mm nominal size) in raft, footing, base of columns, chajja, roof slab etc. excluding the cost of centering & shuttering. (Cement & reinforcement steel shall be issued free of cost at Nalco's store.)

P/F 100mm sand cast iron "P"or"S" trap : Providing & fixing 100mm sand cast iron "P" or "S" trap for Indian/orissa type W.C. including all labours, tools & tackles etc. complete as per the direction of MIC

P/F white vitreous chain flat : Providing & fixing white vitreous chain flat back lipped front or wall corner type urinal of approved make with ISI make of size 430x260x350mm & 340x410x265mm respectively (Hindware/ Neycer/ Parryware) including all labours, tools & tackles etc. complete as per the direction of MIC

P/F CP brass waste - (32 mm dia) : Providing & fixing 32mm dia CP brass waste for wash basin/ Urinal pan/ sink etc.

P/F CP brass waste - (40 mm dia) : Providing & fixing 40mm dia CP brass waste for wash basin/ Urinal pan/ sink etc.

P/F CP brass pillor cock- (15mm dia) : Providing & fixing of CP brass pillar cock of 15mm dia for wash#basin of any approved brand & make weighing not less than 450 gms with ISI mark (heavy duty) replacing by removing/dismantling of damaged material where ever required

P/F Brass bib cock :Providing & fixing of CP brass long body bib cock 15mm dia of approved brand & make weighing not less than 690 gms with ISI mark. replacing by removing/dismantling of damaged material where ever required.

P/F Brass stop cock : Providing & fixing of C.P brass stop cock (consealed)15mm dia of approved brand & make weighing not less than 400 gms with ISI mark medium duty replacing by removing/dismantling of damaged material where ever required

P/L CP brass spreader for urinal pan : Providing & fixing CP brass spreader for half stall urinal basin of approved brand & make with ISI mark medium duty replacing by removing/dismantling of damaged material where ever required.

P/F PVC low level cistern handle set : Providing & fixing of PVC low level cistern handle set of approved brand

P/F Ball valve of (15mm dia) : Providing & fixing of 15mm nominal ball valve (brass) of approved quality complete both for high pressure & low pressure with plastic floats with all complete replacing by removing/dismantling of damaged material where ever required.

P/F 40mm dia PVC flush bend pipe : Providing & fixing 40mm dia PVC flush Bend pipe for low level cistern all associated works complete including grouting with C.C. 1:2:4 and making good the wall replacing by removing/dismantling of damaged material where ever required.

P/F Low level HDPE cistern 10 liter capa : Providing & fixing low level HDPE cistern 10 liter capacity of approved make with all necessary fittings & bracket including grouting the bracket with C.C 1:2:4 and making good the wall (Parryware/ Slimline)

P/F PVC waste pipe with union-32mm dia : Providing & fixing 32mm dia PVC waste pipe with union /couplin clamping with wall for urinal & wash basin and sink

P/F PVC waste pipe with union-40mm dia : Providing & fixing 40mm dia PVC waste pipe with union /couplin clamping with wall for urinal & wash basin and sink

P/F Plastic bibcock of 15mm dia : Providing & fixing plastic bibcock of 15mm dia of approved make

S/F PVC water tank with cover : Supplying & fixing of PVC water tank with cover of approved make with suitable locking arrangement

Supply all labours fixing inposition PVC : Supply all labours, tools & tackles placing & fixing in position PVC water tank including supply of required jam nuts gaskets etc. complete including making holes. (old and new materials supplied by contractor or NALCO)

P/F covers for PVC water tanks : Providing & fixing covers only suitable for PVC water tanks including fixing accessories & locking arrangement etc. complete

P/F Unplasticised PVC pipes - 15mm dia : Providing & fixing of Chlorinated polyvinyl Chlorinated (CPVC) pipes 15mm dia pipes, having thermal stability for hot or cold water supply, including all CPVC plain & brass threaded fittings of any approved make confirming IS-1239 all complete including cost of fittings, accessories etc as per instruction of the engineer in charge

P/F Unplasticised PVC pipes - 20mm dia : Providing & fixing of Chlorinated polyvinyl Chlorinated (CPVC) pipes 20mm dia pipes,having thermal stability for hot or cold water supply, including all CPVC plain & brass threaded fittings of any approved make confirming IS-1239 all complete including cost of fittings, accessories etc as per instruction of the engineer in charge

P/F Unplasticised PVC pipes - 25mm dia : Providing & fixing of Chlorinated polyvinyl Chlorinated (CPVC) pipes 25mm dia pipes, having thermal stability for hot or cold water supply, including all CPVC plain & brass threaded fittings of any approved make confirming IS-1239 all complete including cost of fittings, accessories etc as per instruction of the engineer in charge

Prov. of medium duty GI pipes- 15mm : Providing & fixing of 15mm dia nominal bore medium duty G.I pipes for repair & maintenance of water supply work and laying of new lines etc having ISI mark and of TATA MAKE or equivalent. with all fittings (except union) and clamps, including cutting & making good the wall etc for internal/external works.

Prov. of medium duty GI pipes- 20mm : Providing & fixing of 20mm medium duty G.I pipes for repair & maintenance of water supply work and laying of new lines etc having ISI mark and of TATA MAKE or equivalent. with all fittings (except union) and clamps, including cutting & making good the wall etc for internal/external works

Prov. of medium duty GI pipes- 25mm : Providing & fixing of 25mm medium duty G.I pipes for repair & maintenance of water supply work and laying of new lines etc having ISI mark and of TATA MAKE or equivalent. with all fittings (except union) and clamps, inclding cutting & making good the wall etc for internal/external works

Prov. of medium duty GI pipes- 32mm : Providing & fixing of 32mm medium duty G.I pipes for repair & maintenance of water supply work and laying of new lines etc having ISI mark and of TATA MAKE or equivalent. with all fittings (except union) and clamps, inclding cutting & making good the wall etc for internal/external works

L/C. for L/F of GI/PVC pipes-15mm : Labour charges for laying & fixing of 15mm nominal bore GI/PVC pipes with fittings including all tools tackls jutes & red oxide excluding cutting trenches, floors & walls (internal & external works)

L/C. for L/F of GI/PVC pipes-20mm : Labour charges for laying & fixing of 20mm nominal bore GI/PVC pipes with fittings including all tools tackls jutes & red oxide excluding cutting trenches, floors & walls (internal & external works)

L/C. for L/F of GI/PVC pipes-25mm : Labour charges for laying & fixing of 25mm nominal bore GI/PVC pipes with fittings including all tools tackls jutes & red oxide excluding cutting trenches, floors & walls (internal & external works)

L/C. for L/F of GI/PVC pipes-32mm : Labour charges for laying & fixing of 32mm nominal bore GI/PVC pipes with fittings including all tools tackls jutes & red oxide excluding cutting trenches, floors & walls (internal & external works)

Removing chockage & cleaning of floor : Removing chockage & cleaning of floor trap/ WC 'S' or 'P' trap/ inespection chammber & gully trap & cleaning of pipes up to insopection chammber from trap including refixing the door vent & grating

Removing chockage & cleaning of sewerage : Removing chockage & cleaning of sewerage pipe line depth up to 2 meter from main hole to main hole or IC to main hole including disposal of waste materials as directed

Cleaning of man hole chamber : Cleaning of manhole chamber & disposal of rubish, waste materials sludges etc. within lead of 50 meter up to any size including all labours, tools & tackles etc. complete

Cleaning of septic tank : Cleaning of septic tank including removal of deposited sludge, soil & pump out the water etc. & disposal the same to a distance within 2 KM etc. complete all as per instruction of MIC (Measurement shall be taken as per actual volume sludge inside septic tank

Reparing of leakage valves/stopcock/bibc : Reparing of leakage valves/ stopcock/ bibcock/ pillorcock etc. by putting washer including all labour, tools & tackles etc complete

Disinfection cleaning of PVC over head : Disinfection cleaning of PVC over head water tank by applying bleaching powder, rubbing by coconut berum brush & wasging cleaning with clean water & refixing the drain nut in position including all labours, toos & tackles etc. complete

P/F Bevelled edge 5mm thick mirror : Providing & fixing Bevelled edge 5mm thick mirror of size 600x450mm of approved quality complete 6mm thick AC sheet ground fixed to wooden cleats with CP brass serews and washer

SYMET Shelf of size 450/600mm long : Providing & fixing PTMT Symet Shelf of size 450/600mm long 120/124mm width and 36mm height having appx. Wt. of 300gms of Prayag polymers (P) Lttd. Make or equivalent of approved quality as per specification & instruction of MIC

PTMT Towel rail 24" : Providing & fixing PTMT Towel rail 24" with total length of 645mm width 78mm & effective height 88mm with concealed arrangement and approx. weight of 190gms of Prayag polymers (P) Lttd. Make or equivalent of approved quality as per specification & instruction of MIC

PVC connection pipe of 450mm(18") long ; Providing & fixing PVC connection pipe of 450mm(18") long with PTMT collar and bush of Prayag polymers (P) Lttd. Make or equivalent of approved quality as per specification & instruction of MIC.

P/F Centering and shuttering : Providing and fixing centering and shuttering with shuttering ply wood/ steel plate including curved, hexagonal, octagonal and such other shaped shuttering for foundation, footing mass concrete, machine and equipment foundations columns, pillars, posts, struts and pedestals, lintels, beams, girders, cantilever and brackets, suspended floors, roofs staircase waists, landing steps, shelves and their supports, balances, chajjas, underground tunnels, ducts, trench foundations, etc, and any other similar items as directed including strutting, racking, propping etc. keeping the same after specified period etc. complete for all depth and heights.

PTMT ballcock of 15mm nominal sizePTMT b ; Providing & fixing PTMT ballcock of 15mm nominal size 110mm long, 70mm high and 40mm wide with piston travel of minimum 5mm of Prayag polymers (P) Lttd. Make or equivalent of approved quality as per specification & instruction of MIC

PTMT ballcock of 20mm nominal size 125mm : Providing & fixing PTMT ballcock of 20mm nominal size 125mm long,77mm high and 42mm wide with piston travel of minimum 5mm of Prayag polymers (P) Lttd. Make or equivalent of approved quality as per specification & instruction of MIC

P/F Existing door frame with 30mm thick : Providing and fixing to existing door frame with 30mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire- retardant grade unsaturated polyester resin, moulded to 3mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels and conforming to IS: 14856-2000 including fixing to frames all complete as per direction of MIC

Supplying & stacking of Morum : Supplying & stacking of Morum/crusher dust of approved quality (the rates inclusive of stacking, transporting, royality cost if any other taxes etc.)

Supplying & stacking of 45to63mm graded : Supplying & stacking of 45 to 63mm graded aggregate of broken granite stone (the rates inclusive of stacking, transporting, royality cost if any other taxes etc.)

Supplying & stackingof G.stone screening : Supplying & stacking of Granite stone screening 12mm & below (the rates inclusive of stacking, transporting, royality cost if any other taxes etc.)

Laying water bound macadam : Laying water bound macadam base course with stone aggregate 63mm to 40mm including stone screening, sand, binding materials and including screening, sorting spreading to camber and a gradient and consolidating with road roller complete as per the specification etc complete (materials will be taken rom stack) layer thickness will be as per the instruction of M-I-C. Measurment will be taken for compacted thickness only.

Cutting of road berm : Cutting of road berm for removal of stagnant water on the road surface including disposal of rubbish lead up to 50mtr and lift up to 1.5mtr in all kinds of soil complete as per direction of M-I-C.

Painting road surface marking-Tow or mor : Painting road surface marking, humps with two or more coats to give uniform finish withready mixed road marking paint conforming to IS:164 on bituminious surface in approved colour including cleaning the surface of all dirt, scales, oil, grease and foreign materials etc complete

Supply of JCB machine : Supply of mechanical excavator JCB/ equivalent for miscelaneous works like Dozing, sprading, levelling earth, debris, sand, house keeping debris or cutting of sand for making channel inside river including cost of operator, fuel, tools & tackles etc.,all complete as per the direction of MIC.

Providing & fixing concertina coil 600mm : Providing & fixing concertina coil 600mm dia stretched to 6meter/51 spiral( minimum 125 clips per coil of 96 meter length per boundle) with 3 horizontal stands fencing comprising of horizontal lines of reinforced barbed tape (RBT) of srping steel wire thickness of 2.5mm as per IS-4454 with steel sheet thickness on 0.52mm as per IS:513 length tensioned and fixed Y shape MS angle posts. Reinforced barbed tape should be fixed with the posts by means of HT fastener clips, RBT clips, C clips etc. as instruction of MIC all complete

Laying dry stone pitching 22.5cm thc : Laying, Supplying, Transporting, stacking & spreading of dry stone pitching 22.5cm thcik including preparing the surface etc. complete. of approved quality and authorised sources. The rates inclusive of stacking, transporting, royality, other levies and other applicable taxes etc. complete as per instruction of the Manager-in-charge

P/F white vitreous china closet : Providing & fixing of white vitreous china water closet squattering pan(Orissa type)size 580x440mm of Parryware/Hindware/Neycer make including making all connections but excluding the cost of other fitting as per direction of MIC including replacing by removing/dismantling of damaged material and stacking or disposal of debris to identified area within a lead of 2.0KM where ever required etc complete

Spreading of moorum/sand/crusher dust/m : Spreading of moorum/ sand/ crusher dust/metal for road work (without roller) & ramming, watering complete. (materials will be taken from stack)

Fabrication of misc.steel struct : Fabrication of miscellanous steel structure made out of M.S joist, angles, channels, flats, plates rods, chequred plate, pipe rails etc. including the cost of all transportation, labour consumables, tools all complete as per the direction of MIC.

Synth.ename Painting of misc.steel strct : Painting two coats of synthetic enamel paint over a coat of red oxide primer on miscellanous steel structure of any approved brand & shade as per direction of MIC

Fabrication of MS grill : Fabrication of MS grill/ grating hand ralling made out of angles, flats, pipe, rods etc. including welding,cutting & cost of all transportation, laboures,consumables, tools & tackles complete all as per direction of MIC.

Erection of MS grill : Erection MS grill/ grating hand ralling made out of angles, flats, pipe,rods etc. including welding, cutting, hoisting arrangement, cutting grooves/ holes for proper alignment & necessary jointing with old grills/grating & cost of all transportation, laboures, consumables, tools & tackles complete all as per direction of MIC at all elevation complete

Synth.enamel Painting MS grill : Painting two coats of synthetic enamel paint over a coat of red oxide primer on MS grill/ grating hand ralling of any approved brand & shade as per direction of MIC

Dismantaling of steel structure made : Dismantaling of steel structure made of single or build up section with joist, angles, flats, rods, plates, chequred plates etc. by necessary gas cutting/chiseling, hammering ,cuting groves, making holes i

f necessary by chipping and removing the dismantaled structure to place for reuse or to NALCO store as per the direction of MIC at any elevation complete

Painting with One coat of red oxide pain : Painting with one coat of red oxide paint over old steel surfaces, after removing of all pillow out paint, rust, dust & any other foregin materials with necessary scaffolding and removal of the same after the completion of the work at any elevation complete