CA NO.CWE BLY/GE (E)/ 53 OF 2020-21 PROVN OF TOILET BLOCK IN BLDG NO. T-68 UNDER GE (EAST) BAREILLY

Amount

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.

Excavation over areas in hard/ dense soil n exc 1.5 m deep and getting out complete all as specified and directed.

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth for foundation etc. or for manholes, cesspits, shafts etc. not exc. 10 Sqm on plan and getting out in soft/ loose soil complete all as specified and directed.

M&L for providing plain cement concrete, type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work n.exc. 200 mm thick curved (horizontal or sloping ) work in rough finished flat surfaces of concrete complete all as specified and directed.

M&L for form work to sides and soffits of floor or roof beams, beam haunchings,girders, ressummers, lintels, cantilevers, shelves including supports,overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

M&L for form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L for form work to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M&L for formwork to edges of concrete flats, treads, breaks in floors, window ills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.

M&L for RCC M25 Design mix as in slab supported on walls, beams and columns in floor, roof, landing, balconies etc complete all as specified and directed.

M&L for RCC M25 Design mix as in chajjas omplete all as specified and directed.

M&L for RCC M25 Design mix as in foundations, inclduing raft, footing, foundation beam, under ramed piles and mass concrete complete all as specified and directed.

M&L for RCC M25 Design mix as in columns, piers, posts etc complete all as specified and directed.

M&L for RCC M25 Design mix as in beams, lintel beams over 1.50 meter span,cantilevers, bressummers etc complete all as specified and directed.

M & L for providing pre-cast reinforced cement concrete landing, manhole covers and similar items with plain faces in cement concrete 1:2:4 type B-1, (using 20 mm graded crushed stone aggregate) and setting in cement mortar 1:6 with and including necessary formwork complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bars 5 mm dia and over up to and including 10 mm dia as in stirrups, spacer and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

Removing excavated soil to distance n.exc. 50m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

M&L for brick work with fly ash bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L rendering 15mm thick on fair of faces brick work or concrete internal surfaces in CM 1:6, finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick on fair faces of brick work or concrete external surfaces in CM 1:4, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick in cement mortar 1:3 on ceiling of fair faces of brick work or concrete surfaces and finishing the surfaces even and smooth with out using extra cement complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and direcetd.

M&L for damp proof course to horizontal or vertical surface including necessary formwork, 40mm thick in cement concrete 1:2:4 type B-0 complete all as specified and directed.

M&L for hard core of gauge n. exc. 63 mm deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.

M&L 100mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:4 to other than fair faces of brick wall surfaces finished surface even and fair for fixing tiles etc complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding layer in CM 1:6, for laying floor finishes complete all as specified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in vertical surfaces such as skirting or dado set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for 20-22 mm thick granite stone Z black colour (of any type) work (table rubbed and polished) in floors, steps, jambs, pillars, window cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging complete all as specified and directed.

M & L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed.

M & L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surfacecomplete all as specified and directed.

M & L for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area @ 5 litres per square meter complete all as specified and directed.

M & L for Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wallcomplete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces and apply two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparation of new plaster surfaces and applying three coats of white wash on ceiling complete all as specified.

M&L for 75 mm thick cement concrete 1:3:6, type C1, with using 20 mm graded stone aggregate in floor/plinth protection, finish the surface even and smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 mtr and every change of direction and filling the same with bitumen filler/filler boards 1:3 by weight complete all as specified and directed.

M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:4, over RCC roof slabs for laying water proofing treatment mixed with using water proofing liquid @ 150 ml per bag of cement complete all as specified and directed. (Note : Water proofing liquid shall be measured and paid separately)

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

M&L 30 mm thick factory made both side prelam PVC sheet used instead of plain colour PVC sheet, style and rails feathered at edges consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel heaving a panelling of plain colour PVC sheet to be fitted in the MS frame wedded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site complete all as specified and directed.

S&F aluminium alloy powder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5.50mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed :- (a) Frame 100x44x1.48mm thick with rawl plug (b) Middle and lock rail : 150x44x1.48mm thick (c) Bottom rail : 150x44x1.48mm thick (d) Top rail/style : 85x44x1.48mm thick (e) Aluminium beading : 0.7mm thick (f) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver aluminium stopper, cleat double action floor spring hydraulically regulated made of n.less than 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other part of steel heavy duty ( Make Sandhu ISI marked or its equivalent approved make) (g) Making good of wall surface to match with existing surface complete.

S&F powder coated aluminium ventilators box type with louvers & wire mesh fixed with neoprene rubber gasket, aluminium beading, clips, frame made with powder coated aluminium section of size as appended below :- (i) Frame 45.20 mm x 35 mm x 1.15 mm (ii) Aluminium beading -0.7 mm thick (iii) Glass louvers depth 6 inch, blade angle : 38 degrees and thickness of blade 2.02 mm with 106.525 mm spacing (iv) Aluminium necessary fittings complete as required (v) Making good of wall surfaces with silicon to match exisiting surface complete all as specified and as directed.

S&F viteous china squating pan "ORISSA PATTERN" of size 580mm x 440mm, white with integral foot rest, with P or S trap size 100 mm dia front or back inlet (exclusing flushing cistern and flush pipe) including PCC 1:2:4 type B-1 for making good the floor complete all as specified and directed.

S&F vitrous china wash down water closet pan (padestal pattern), white including connection to drain or out going pipe and to flushing pipe etc inclduing plastic seat cover complete all as specified and directed.

S&F PVC low level flushing cistern 10 litres, valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flushing pipe complete all as specified and directed.

S&F 15 mm dia ball valve high pressure of PTMT with epoxy coated Alumunium rod and high density plastic ball screwed (Wt not less than 142 gm) complete all as specified and directed.

S&F 1000 litre ISI Marked rotational moulded polyethlene tripple layer water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F vetreous china table top wash basin of size 550 x 400mm including SS bottle trap, HDPE waste pipe including fixing on counter with SS waste coupling complete all as specified and directed.

S&F vitreous china urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F 15mm bore PVC connections of length 450mm with PTMT nuts on both ends complete all as specified and directed.

S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (minium weight 60 gms) complete all as specified and directed.

S&F 15 mm bore fancy type chromium plated bib taps, cast copper alloy capstan head, screwed down,screwed for iron pipe or for brass ferrule chromium plated with flange fixed complete all as specified and directed.

S&F 15 mm bore fancy type brass angle valve, cast copper alloy chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F 15 mm bore fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F stainless steel of AE - SI 316 grade tubular towel ring including a pair of CP brass bracket complete all as specified and directed.

S&F toilet paper holder coloured, vitreous china, box type complete all as specified and directed.

S&F soap dish, vitreous china white, approximate size 160 x 160 x 90 mm complete all as specified and directed.

S&F 8 mm dia brass CP health faucet with 1.0 meter long flexible tube and wall hook screwed for iron pipe fancy type long body complete all as specified and directed.

S&F GI tubing of 15 mm dia, medium grade with all fittings and fixed to walls or ceiling or laid in floors complete all as specified and directed.

S&F GI tubing of 20 mm dia, medium grade with all fittings and fixed to walls or ceiling or laid in floors complete all as specified and directed.

S&F PVC (SWR) multifloor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed.

S&F PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and directed.

S&F PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and directed.

S&F PVC (SWR) 110mm bore bends any radius complete all as specified and directed.

S&F PVC (SWR) 75mm bore bends any radius complete all as specified and directed.

S&F PVC (SWR) 75 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and directed.

S&F PVC (SWR) 110 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and directed.

S&F PVC (SWR) 'P' or 'S' trap 110 mm dia complete all as specified and directed.

M&L for 60 mm thick machine pressed precast coloured glazed interlocking paver block factory casted using grey cement with pigment, any shape and any size confirming to IS 15658-2006, M-35 grade complete all as specified and directed.

M&L for sand filling under floors or in foundation, UG cable including watering and consolidation complete all as specified and as directed.

M&L for precast (factory casted) cement concrete kerb stone casted in PCC (1:2:4) type B-1 using 20mm graded stone aggregate with plain or interlocking joints (as directed), making groove in ground of desired dimension, placing in erect position Kerb stone in edging and set and jointed in cement mortar 1:4, making good distrubed surface of ground complete all as specified and directed.

M&L for cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in concrete bed to drain pipes of 150 mm bore including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.

M&L PCC 1:2:4 type B-1, using 20mm graded stone aggregate as in coping/benching inside manhole including necessary from work finished even and smooth without using extra cement complete all as specified and directed.

S&F 150 mm dia reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trench complete all as specified and directed.

M&L for septic tank 25 users with brick masonry wall, PCC in foundation, floor, RCC cover slab including sludge chamber, CI vent pipe, CI cowl, inlet and outlet pipe , RCC baffle wall and all necessary excavation and earth work complete all as specified, shown in drawings No. TD/217 sheet No 1/7 to 7/7 and as directed.

M&L for soakage well of size 1.20M x 4.50M deep in ordinary soil with foundation in PCC 1:3:6, brick masonry in cement mortar 1:4, RCC in M25 (design mix) filtration material consisting of brick bats, complete all as specified, shown in drawings No TD/309 sheet 1/4 to 3/4 and as directed.

M&L for cutting steel water tubing and inserting GI Tee, union, elbow fittings etc upto 50 mm dia complete for alteration or addition water pipe connection complete all as specified and directed.

Supplying & laying GI tube 25 mm bore medium grade with all fittings in trenches complete all as specified and directed.

S&F 15mm bore stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed.

E/M Part:- M&L for point wiring with 1.5 sqmm cable PVC unsheathed and insulated copper multistranded conductor FRLS 1100 Volts grade cable (red colour cable to be used for live connection and black colour cable to be used for neutral connection) controlled by one way switch drown through and including PVC concealed conduit with all accessories including 1.0 sqmm copper multistrand conductor FRLS 1100 Volts grade unsheathed PVC insulated (green colour) continuity earth wire connected to common earth dolly and sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switch , socket and fan regulator with 3 mm thick hylum laminated sheet cover incl cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and as directed for one light/fan/bell point controlled by one switch/bell push complete all as specified and directed.

All as per item No 84 here-in-before but for 3 pin 5 Amps socket outlet point controlled by one switch on independent board

S&F switch piano flush type polycarbonate 5 A single pole one way complete all as specified and directed.

S&F socket outlet polycarbonate 2 in 1, 3 pin Amps 5 pin multipurpose flush type complete all as specified and directed.

S&F of ceiling rose PVC polycarbonate, isolated body, 3 terminals AC 230 volt complete all as specified and directed.

S&F Lamp Holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F lamp LED retrofit lamp B-22 holders base with polycarbonate diffuser 9 watt, 230 volt complete all as specified and directed.

S&F ultra slim LED MS batten light fitting, 1 x 20 watt powder coated decorative end cap complete with retrofit poly carbonate glass tube 4' long including electric connection with three core flexible PVC insulated copper conductor multistranded cable of 1.0 sqmm from ceiling rose to batten complete all as specified and directed.

S&F ultra slim LED MS batten light fitting, 1 x 10 watt powder coated decorative end cap complete with retrofit poly carbonate glass tube 2' long including electric connection with three core flexible PVC insulated copper conductor multistranded cable of 1.0 sqmm from ceiling rose to batten complete all as specified and directed.

S&F of exhaust fan 250 mm sweep, PVC body, AC 230 volts with louvres including making suitable size hole in the wall for air flow and grouting of nuts, bolts and washers including electric connection with three core flexible PVC insulated copper conductor multistranded cable of 1.0 sqmm from ceiling rose complete all as specified and directed.

S&F security light fitting, LED type, 25 watt, IP-65 pressure die cast housing with prismatic polycarbonate diffuser & individual LEDs as light source with integrated electronic driver complete with M&L GI pipe mounting bracket of size 25/32 mm dia and 2 m long bend including nut, bolts and 2 Nos GI clamps of size 50 x 6 mm as required and making connection with three core 1 sqmm copper conductor cable complete all as specified and directed.

M&L for sub main wiring 2 runs of single core 4 sq mm (FR) PVC insulated unsheathed, cable 1100V medium grade , multi stranded copper conductor drawn through and including adequate sizes PVC conduit, medium grade, concealed in wall for sub main connection with accessories and fittings and one run of 4 sqmm (FR) single core multi stranded copper conductor cable as earth continuity conductor. (Note:- Two runs of 4.0 Sq mm cable one length and one run of 4.0 sq mmm copper conductor shall be measured as one unit length.)

S&F sheet metal enclouser DBs when MCBs to be used 8 way double door single pole & neutral with 200 Amps rated bus bar complete all as specified and directed.

S&F sheet metal enclouser DBs when MCBs to be used 4 way double door single pole & neutral with 200 Amps rated bus bar complete all as specified and directed.

S&F MCB SPN 32A to 40A, 230V, 10kA, B curve complete all as specified and directed.

S&F MCB SP 6A to 32A, 230V, 10kA, B curve complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.3 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metres below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts,check nuts, nuts and washers of GI or steel all as shown in electrical plate No 5 of SSR-I connected to earth test point by means of nut, bolts and washers made out of galvanised iron or steel all including earthing pit in PCC (1:3:6) type C1,RCC (1:2:4) type B1 precast cover slab with one handle made out of 8 mm dia round bar,20 mm dia (medium grade) protecation pipe and providing layer of charcoal or coke and salt in alternative layers,necessary earth work complete as specified or indicated including testng on completion complete all as specified and directed.

Supply and laying bricks old size, well burnt sub class 'B' bricks as in protection cover over under ground cable laid flat across the cable adjoining each other, laid dry complete all as specified and directed.

Bore holes under road or cutting the road /pavement /hard standing or any other situation by mannual or other means for 25mm bore GI pipe for crossing the cable and making good both the end complete all as specified and directed.

S&F of galvanized iron pipe of 25 mm bore Light grade with all fittings for cable protection for road crossing/ culvert/ path/ on wall/ floor/ pole or laid in floor complete all as specified and directed.

Supply, lay jointing testing and commisioning XLPE insulated screened PVC bedded, armoured, heavy duty electric cable with stranded aluminium conductor, 1100 Volts grade, cross sectional area 10 Sqmm 2 core complete all as specified and directed.

M/S ABHISHEK ENTERPRISES

M/S Gupta Builders

UTTRAKHAND BUILDERS

R K CONSTRUCTION

REHAN CONSTRUCTION