Repairing and Rewinding of various size of submerged (SCF) type Motor /Pump set

Name of Work :-2215-Water supply and sanitation. - 101- Gandhinagar water supply scheme.

Repairing and rewinding of different size S.C.F. pumps and motors at charedi water supply head works in G.T.S.

BILL OF QUAINTITIES

MEMORANDUM SHOWING THE ITEM OF WORKS TO BE CARRIED OUT

Item Description of Item Quantity Unit Rate In figures Amount

Repairing and Rewinding of 300 H.P. (SCF)

submerged centrifugal pump set by

Repapering/ Replacing following parts and

putting the pump set in to working order. . (1)

Motor Rewinding charges.

(2) "O" ring Set.

(3) Upper and lower bearing.

Item Description of Item Quantity Unit Rate In figures Amount

(4) Cable Sealing, Gromet.

(5) Mechanical seal Upper and lower.

(6)Thermostate and Moisture sensor.

(8) Oil 20W 40 Castrol CRV

Item Description of Item Quantity Unit Rate In figures Amount

(9) Labour charge for pump set dismantling

and fitting etc.

(10) Impeller repairing and balancing.

(11) Installation charge with transportation,

labour charges for pump set lifting and

lowering with tools, tackles etc.

(12) Supply and fitting of guide pipe of size

2.5" by welding new support and fitting the

pipe in one line with necessary safety

equipment required to go down in trolley the

welder with helper.

Item Description of Item Quantity Unit Rate In figures Amount

Repairing and Rewinding of 180 H.P. (SCF)

submerged centrifugal pump set by

Repapering/ Replacing following parts and

putting the pump set in to working order. . (1)

Motor Rewinding charges.

(2) "O" ring Set.

(3) Upper and lower bearing.

(4) Cable Sealing, Gromet.

(5) Mechanical seal Upper and lower.

Item Description of Item Quantity Unit Rate In figures Amount

(6)Thermostate and Moisture sensor.

(8) Oil 20W 40 Castrol CRV

(9) Labour charge for pump set dismantling

and fitting etc.

(10) Impeller repairing and balancing.

Item Description of Item Quantity Unit Rate In figures Amount

(11) Installation charge with trasportation,

labour charges for pump set lifting and

lowering with tools, tackles etc.

(12) Supply and fitting of guide pipe of size

2.5" by welding new support and fitting the

pipe in one line with necessary safety

equipment required to go down in trolley the

welder with helper.

Rupees Twenty seven lakhs seventy one thousand seven hundred eighty one and paise eighty eight

Executive Engineer,

Capital Project Division No.3

Item Description of Item Quantity Unit Rate In figures Amount

I/We am/are willing to carry out the above work @ ____________ % below/above percent (should be written in figures

and words) of the estimated rates mentioned above Amount of my/our tender works out as under.

Estimated cost put to tender Rs. 27,71,781=88 Estimated cost put to tender Rs. 27,71,781=88

Deduct ___________% below Add__________% above

In words In Words

Note 1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for

which no extra payment shall be made.

Note 2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

Note 3 GST and Income tax TDS will be deducted at a source while making payments of bills

Note 4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017

Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual

mix design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate

mentioned in all the tender.

Executive Engineer,

Capital Project Division No.3