Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.7 LAccepted-Finance | L1 | Accepted-Finance Rate is below. Thereafter accepted | |
| 2 | L2₹4.7 L+₹141 (0.03%)Rejected-Finance P K RAJ KASHIPUR DIST PURULIA | PURULIA | WEST BENGAL | 723101 | L2 | Rejected-Finance Rate is high. Thereafter rejected | |
| 3 | L3₹4.7 L+₹375 (0.08%)Rejected-Finance | L3 | Rejected-Finance Rate is high. Thereafter rejected |
Tender Value
₹4.7 L
EMD Value
₹9,384
Closing Date
11 Sept 2026, 12:30 pmClosed
EXECUTIVE ENGINEER PURULIA DIVISION PWD
EXECUTIVE ENGINEER PURULIA DIVISION PWD RANCHI ROAD POST DIST PURULIA
Annual maintenance of Circuit House and ADM (LR) Bungalow in the district of Purulia under Purulia Construction Sub Division of Purulia Division PWD during the year 2026-2027.
2026_WBPWD_5021400_3
WBPWD/EE/PRLDN/NIET_10/26-27
Open Tender
CIVIL WORKS
Percentage
365 days
PURULIA
Please refer Tender documents.
4 documents required · 4 mandatory
₹9,384
Yes
8 Oct 2026
1 Sept 2026
14 Sept 2026
5 Sept 2026
11 Sept 2026
5 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.
With cement mortar 1:4 (1 cement : 4 fine sand) | 38.85 | Sq.M. | 547.4 | ₹21,266.49 |
| 2 | Dismantling W.C. Pan of all sizes including disposal of dismantled materialsincluding malba all complete as per directions of Engineer-in-Charge. | 4 | Each | 134.1 | ₹536.4 |
| 3 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. | 10 | Each | 429.1 | ₹4,291 |
| 4 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. | 26 | Metre | 570.95 | ₹14,844.7 |
| 5 | Providing and fixing to existing door frames. 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. | 10.5 | Sq.M. | 3,720.75 | ₹39,067.88 |
| 6 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | 18 | Sq.M. | 1,176.8 | ₹21,182.4 |
| 7 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | 12.6 | Sq.M. | 3,473.85 | ₹43,770.51 |
| 8 | Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete.
14.40.1 125x70x4 mm (ordinary type) | 18 | Each | 171.05 | ₹3,078.9 |
| 9 | Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete | 15 | Each | 271.45 | ₹4,071.75 |
| 10 | Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-charge
Anodized (AC 15) aluminium | 16 | Each | 107.9 | ₹1,726.4 |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.87 MB
2911.pdf
Tender Documents • 0.51 MB
DLP.pdf
Other Document • 1.17 MB
BOQ_5099574.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .