SPECIAL REPAIR/REPLACEMENT OF LT OH LINES TO LT UG CABLE AND CONNECTED WORKS AT GTC AREA AND LT ELECTRIC SUPPLY AT ABHERA UNDER AGE E/M AT MIL STN KOTA

Amount

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth or n exc 10 Sqm on plan and n exc 1.5 m in depth & getting out, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes or for laying underground cable, pipe lines etc. in soft/ loose soil, complete all as specified & directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5M in depth and getting out in hard/dense soil for laying of under ground cables/pipes and foundation etc, complete all as specified and directed.

Rough excavation inside defence land, not exceeding 1.50 metre deep and getting out in hard/dense soil and removing the excavated soil to a distance exceeding 250 m but not exceeding 500 m for the purpose of returning filling in trenches, complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5M in depth and getting out in hard rock for laying of under ground cables/pipes and foundation etc, complete all as specified and directed.

Returning, filling in soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed.

Removing excavated material (soil) n exc. 50m distance and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and directed.

Cutting of road / hardstanding upto a size not exceeding 20 cm in width and not exceeding 60 cm in depth for laying of LT UG cable protection pipe line, making good the disturbed portion so as to match existing finishing or with PCC 1:2:4 type B1 complete all as specified and directed.

M&L dry clean sand cushioning to PVC under ground cable with screened and washed sand and punning to provide a required cover complete all as specified and directed. Note:- Thickness after punning shall be considered for payment.

M&L for pulverized fuel Ash-lime bricks (Fly ash bricks - non modular size), class 10, laid dry and flat adjoining each other over sand cushion in trenches as protection to UG cable, complete all as specified and directed.

Dismantling of ACSR conductor of any description from LT poles, complete all as specified and as directed.

Dismantling of cross arms of MS channel or angle iron section etc. complete all as specified and as directed.

Dismantling of insulator of any type complete all as specified and as directed.

Disconnecting and taking down existing LT panel of any type/capacity and making good disturbed surfaces, complete all as specified and as directed.

M&L for Earthing with galvanized steel earth plate electrode of size 600 mm x 600mm x 6.0 mm, buried directly in ground (earth plate not less than 2.25 Mtr below normal ground level) connected to galvanized earth strip of 25x4 mm dia by means of bolts, buts, check nuts and washers of galvanized iron on steel including 40 mm bore light grade GI tubing for protection of earth strip, MS sheet metal funnel with wire mesh, watering pipe medium grade 20 mm bore, charcoal or coke and common salt in alternative layer of 15 Cm compacted thickness all around the electrode with concrete earth pit of PCC 1:3:6 type 75 mm thick precast RCC (1:2:4) type B1 pit cover reinfored with 8 mm dia deformed bar and suitable handle made of 10 mm dia round bar including necessary excavation, earth work, in soft/loose soil and disposal of spolis to a distance not exc 50 Mtr and necessary connection and testing complete all as shown in electrical plate No. 3 and including dismantling of old u/s earthing complete all as specified and directed.complete all as specified and directed. Notes: - (a) Irrespective of whatever is shown in plate No 3 of SSR, earth pit shall be casted in PCC (1:3:6) type C-1 and precast cover of RCC (1:2:4) type B-1 with suitable handle. (b) Item includes the cost of GI pipe for protection of earth wire and earth lead strip upto 7.5 m.

M&L for Earthing with galvanized steel earth plate electrode of size 600 mm x 600mm x 6.0 mm, buried directly in ground (earth plate not less than 2.25 Mtr below normal ground level) connected to galvanized iron earth wire of 4 dia by means of bolts, nuts, check nuts and washers of galvanized iron including 15 mm bore light grade GI tubing for protection of earth wire, MS sheet metal funnel with wire mesh, watering pipe medium grade 20 mm bore, charcoal or coke and common salt in alternative layer of 15 Cm compacted thickness all around the electrode with concrete earth pit of PCC 1:3:6 type 75 mm thick precast RCC (1:2:4) type B1 pit cover reinfored with 8 mm dia deformed bar and suitable handle made of 10 mm dia round bar and necessary excavation, earth work, in soft/loose soil and disposal of spolis to a distance not exc 50 Mtr and necessary connection and testing complete all as shown in electrical plate No. 3 and including dismantling of old u/s earthing complete all as specified and directed. Notes: - (a) Irrespective of whatever is shown in plate No 3 of SSR, earth pit shall be casted in PCC (1:3:6) type C-1 and precast cover of RCC (1:2:4) type B-1 with suitable handle. (b) Item includes the cost of GI pipe for protection of earth wire and earth wire upto 7.5 m.

S&F GI wire of 4 mm dia suitable for earth continuity conductor or main earthing lead (beyond 7.5 m) fixed on wall/burried in ground/drawn in pipes or any other indicated situation for loop earthing etc, complete all as specified and directed.

S&F in renewal of 40 mm bore Steel water tubing, light grade, galvanised, with all fitting, laid in trenches/fixed to walls/poles etc as protection to cables, with and including necessary MS clamps, nuts botls, washers etc required for fixing, complete all as specified and directed.

S&F in renewal of 50 mm bore Steel water tubing, light grade, galvanised, with all fitting, laid in trenches/fixed to walls/poles etc as protection to cables, with and including necessary MS clamps, nuts botls, washers etc required for fixing, complete all as specified and directed.

S&F in renewal of 80 mm bore Steel water tubing, light grade, galvanised, with all fitting, laid in trenches/fixed to walls/poles etc as protection to cables, with and including necessary MS clamps, nuts botls, washers etc required for fixing, complete all as specified and directed.

M&L steel water tubes 80 mm dia, 'medium grade', galvanised, with all fittings; and laid in trenches, complete all as specified and as directed.

Supply only 63mm bore RRL hose pipe with and including Gun metal Male & Female coupling Each Roll of 15 RM, ISI marked complete all as specified and directed.

S & F of Gun metal nozzle of 63mm bore, ISI marked, complete all as specified and directed.

Taking down old unserviceable existing XLPE LT UG cables of any size/capacity including taking down existing GI pipe wherever used as protection to cable and making good disturbed sufaces to match with the existing surface, complete all as specified and directed.

Supplying, laying, jointing, testing and commisioning XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with multistranded aluminum conductors, 1100 Volt grade (ISI marked), laid in trenches / ducts / encased in GI pipe / fixed to pole/wall with necessary angle iron support, clamp, nut , bolts etc complete all as specified and directed for following cross sectional areas of cables :- Cross Sectional area of cable 150 Sqmm, 3.5 core

Cross Sectional area of cable 120 Sqmm, 3.5 core

Cross Sectional area of cable 95 Sqmm, 3.5 core

Cross Sectional area of cable 70 Sqmm, 3.5 core

Cross Sectional area of cable 50 Sqmm, 3.5 core

Cross Sectional area of cable 25 Sqmm, 4 core

Cross Sectional area of cable 10 Sqmm, 2 core Notes for Srl item Nos. 24.10 to 24.70: - (i) Excavation, earth work, sand cushioning, cable protection cover & GI pipes shall be measured and paid for separately under respective items of BOQ. (ii) Rate deemed to be inclusive of connecting up with control gear including cable glands and cable lugs.

Supply, installing, testing and commissioning of manufacturer's factory assembled and tested monoblock pump set, 5 HP Capacity, 415 Volt, 3 Phase, 50 Hz, Dishcharge not less than 6 LPS, Head not less than 15 Meters with and including automatic star delta starter for 3 phase 5 HP capacity monoblock pump set and connected accessories, complete all as specified and directed.

S & F of Cosmic Star- Standard automatic star delta monoblock motor starter in steel sheet enclosure AC 3 phase, 415 Volts, 50 Hz type MUG with single phase preventer, dry run preventer, overload protection, reverese phase protection suitable for 15 HP monoblock pump set (Contactor size 65Amps, Overload Relay Range 37 to 50 Amps), complete all as specified and directed.

Supply, transporting, erection and fixing steel tubular swaged pole, 9.00 metres long, type 410 SP-31, complete with cast iron base plate, pole cap, finial taper plug, bolts, nuts, washers etc & including necessary earth work and excavation, PCC in foundation 1:3:6 type C2, using 40 mm graded stone aggregate and PCC 1:2:4 type B1, using 20 mm graded stone aggregate as in plinth block, disposal of surplus soil to a distance not exceeding 50 m, painting the pole with two coats of aluminium paint over one coat of red oxide primer including 3 nos band/straps with red post office box colour (300mm wide each) synthetic enamelled paint at a distance 300mm from plinth block and marking pole nos with black synthetic enamelled paint including tarring one coat on steel surface embedded in concrete and including taking down old unserviceable PCC pole, complete all as specified and directed.

Supply and fixing of new generation energy saving and environmental friendly long life versatile pressure die- cast body with heat resistant toughened glass having IP 66 protection level, roadway luminaire 72 Watt LED fitting with high power LEDs as light source (minimum 100 lumens per watt), electronic driver & other accesories including disconnecting and taking down existing unserviceable street light from the pole, complete all as specified and directed.

S & F in renewal of junction box made out of PVC of size 250mm X 190mm X 80 mm with hinged door and locking arrangement, including 4 Nos aluminium bus bar of size 20mmX4 mm fixed on epoxy insulators with and including B-curve type one MCB SP 6 Amps, rupturing capacity 10KA, fixed on the pole with and including suitable mild steel clamps, nut bolts etc. complete all as specified and directed.

S & F in renewal of circuit main wiring for junction box to street light fitting with 1.5 sqmm 3 core PVC insulated and PVC round sheathed multistranded copper conductor flexible industrial cable 1100 V grade and drawn through and including suitable size PVC conduit in street light poles with and including fixing arrangement complete all as specified and directed. Note :- Cost of Necessary tools and plants such as ladders, hydra for connection to street light fittings etc shall be deemed included in the unit rate quoted.

M&L for street light Time lite distribution boards (Astronomical type) 20 Amp, 3 pole/230 Volts suitable for out door operation and including Astronomical time switch infra red sensor for automatic operation of lights as per seasonal variation of daylights, relay, MCB complete all as specified and directed.

S&F of bus bar chamber, 4 pole, factory made using CRCA sheet of 3.15 mm thickness and epoxy powder coated with locking arrangements, comprising of 4 Nos aluminium strip bus bars of adequate length, air insulated and PVC sheathed capacity 400 Amps rating with colour coding and mounted on porcelain insulators housed in a box of size 800x400x250 mm, including connection with LT cable with appropriate lugs, complete all as specified and directed.

Supply, install, connecting and testing of 80mm bore sluice valve, class PN- 1.6 flanged ends, with CI body, wheel and brass spindle and nuts etc, non rising type IS- 14846:2000 marked and including jointing materials i.e. rubber gaskets, nuts, bolts etc. complete all as specified and directed.

Supply, install, connecting and testing of 80mm bore cast iron non return valve, ISI marked, heavy duty, conforming to IS 5312, flanged ends, including jointing materials such as rubber/fibre board gasket, nuts, bolts and twin washers etc, complete all as specified and directed.

S & F in renewal of factory made MCB DB made of sheet steel phosphatised, powder painted with bus bar 200 A, neutral link, IP-43-IK09 protection grade, earth bar and Din rail, 415 Volts TPN with 4 ways, Double door, complete all as specified and directed. Note : - (1) The unit rate includes for cutting the brick walls to accommodate DB to make flush to wall. (2) The unit rate includes for making good the disturbed surfaces including finishes to match with the adjoining surface.

S&F MCB, 6 to 32 Amps, Single Pole & Neutral, 240 Volt, 10 KA 'B' curve including all accessories, complete all as specified and directed.

S & F MCB TPN 63 Amps, 415 volts, four pole, B-curve, rupturing capacity 16KA conforming to IS-8828-1996, IEC-60898, complete, all as specified & directed.

K B Enterprises

NISHA CONSTRUCTIONS

M/s Prem Associates