Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.2 LAccepted-AOC 59 NEW MARKET CLOCK TOWER DEHRADUN UK PIN 248001 | DEHRADUN | UTTARAKHAND | 248001 | ₹20.2 L Quoted ₹20.9 L | L1 | Accepted-AOC LOWEST BIDDER |
| 2 | L2₹22.8 L+₹1.9 L (9.21%)Rejected-Finance FLAT NO C 401 LORD KRISHNA GREEN OPPOSITE DOON SCHOLAR SCHOOL KEDARPUR DEHRADUN UK 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | ₹22.8 L+₹1.9 L (9.21%) | L2 | Rejected-Finance Other than lowest bidder |
Tender Value
Refer Docs
EMD Value
₹48,000
Closing Date
4 Aug 2021, 6:00 pmClosed
GE UTILITY AMBALA CANTT
GE UTILITY AMBALA CANTT - 133001
REPAIR REPLACEMENT OF NON CLOG SEWAGE SUBMERSIBLE PUMP SETS CAPACITY 5HP TO 60HP AND CONNECTED UNDER GE UTILITY AMBALA CANTT
2021_MES_453246_1
GE(U)/AMB-25/2021-22
Open Tender
Civil Works
Item Rate
270 days
AMBALA CANTT
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE UTILITY AMBALA CANTT
₹48,000
Yes
24 Aug 2021
7 Jul 2021
6 Aug 2021
7 Jul 2021
4 Aug 2021
22 Jul 2021
7 Jul 2021 - 20 Jul 2021
Amount
Taking out Non clog submersible sewage pumping set from sewage well foundation (after and including dewatering of sewage well) of 60 HP capacity Make- Kirloskar by lifting and dismantling the same for assessing and carrying out the repair/serving and replacement of unserviceable parts with new parts as listed in subsequent items and making good in running condition with hydraulic air testing and balancing, reassembling and lowering the same in well & fixing on the foundation making connections and testing complete ass as specified & directed by Engineer-in-Charge. Note:- (a) The replaced parts of pump shall be measured & paid separately here-in-after as supply only. (b) Dewatering of sewage well shall be included in the quoted rate of item.
Description all as per Srl item No 1.00 above but of capacity 40 HP
Description all as per Srl item No 1.00 here-in-before but of capacity 30 HP
Description all as per Srl item No 1.00 here-in-before but of capacity 20 HP
Description all as per Srl item No 1.00 here-in-before but of capacity 7.5 HP to 10 HP
Description all as per Srl item No 1.00 here-in-before but of capacity 3 HP to 5 HP
Taking out old unserviceable lubricating oil from the chamber, cleaning and refilling the fresh lubricating oil complete all as specifed & directed by Engineer-in-Charge.
Taking out non clog submersible sewage pumping set from sewage well including all electrical connections and rewinding of motor 60HP non clog submersible sewage pumping set Make- Kirloskar with suitable size and proper guage of winding wire using best quality of insulation material provided with thermal switches for protection against excessive temp flee and replacing O ring set full fastner set, Nitrile O ring and bearing, seals and varnice the motor using fine quality varnish complete all as specified & directed by Engineer -in- Charge.
Description all as per Srl item No 8.00 above but of pump motor 40 HP.
Description all as per Srl item No 8.00 here-in-before but of pump motor 30 HP.
Description all as per Srl item No 8.00 here-in-before but of pump motor 20 HP.
Description all as per Srl item No 8.00 here-in-before but of pump motor 7.5 to 10 HP
Description all as per Srl item No 8.00 here-in-before but of pump motor 3 to 5 HP
Supply only CI impeller with guide bush suitable for 60HP Non clog submersible sewage pumping set complete all as specified & directed by Engineer-in-Charge
Description all as per Srl item No 14.00 above but cap of pump 40 HP.
Description all as per Srl item No 14.00 here-in-before but cap of pump 30 HP.
Description all as per Srl item No 14.00 here-in-before but cap of pump 20 HP.
Description all as per Srl item No 14.00 here-in-before but cap of pump 7.5 to 10 HP.
Supply only lubricated upper/lower bearing for non clog submersible pump of 60 HP complete all as speicified & directed by Engineer-in-Charge. Make : NBC/SKF
Description all as per Srl item No 19.00 above but for non clog submersible pump of 40 HP
Description all as per Srl item No 19.00 here-in-before but for non clog submersible pump of 30 HP
Description all as per Srl item No 19.00 here-in-before but for non clog submersible pump of 20 HP
Description all as per Srl item No 19.00 here-in-before but for non clog submersible pump of 7.5 to 10 HP
Description all as per Srl item No 19.00 here-in-before but for non clog submersible pump of 3 to 5 HP
Supply only hard metal double upper and lower mechanical seal assesbly combination for non clog submersible pump, of capacitor 60 HP complete all as specified & directed by Engineer-in-Charge. Make : Unique/Verman/Delta
Description all as per Srl item No 25.00 above but cap of pump 40HP
Description all as per Srl item No 25.00 here-in-before but cap of pump 30HP
Description all as per Srl item No 25.00 here-in-before but cap of pump 20 HP
Description all as per Srl item No 25.00 here-in-before but cap of pump 7.5/10 HP
Supply and fix in replacement PVC insulated submersible copper cable flat/round of size 10 Sqmm 3 core complete all as specified & directed by Engineer-in-Charge
Description all as per Srl item No 30.00 above but 16 Sqmm 3 core.
Description all as per Srl item No 30.00 here-in-before but 25 Sqmm 3 core.
S&F in replacement CI column pipe both end flanged ISI marked of size 100mm dia including lowering down the new column pipe complete all as specified & directed by Engineer-in-charge.
Supply and fix in replacement MS adjustable spiral bottom plate suitable for 40 to 60HP Motor complete all as specified & directed by Engineer-in-Charge.
Description all as per Srl item No 34.00 above but for size 20 to 30 HP motor.
Description all as per Srl item No 34.00 here-in-before but for 7.5 HP to 10 HP motor.
Supply and fix in replacement shaft AISI-410 suitable for 20 to 30 HP Motor.
Description all as per Srl item No 37.00 above but suitable for size 40 to 60 HP motor.
Supply and fix in replacement MS hexagonal nut and washers MS Steel eye Bolts, Allen Screws etc ISI Marked.
S & F in replacement GI tubing medium grade 40mm dia complete all as specified & directed by Engineer-in-Charge.
S & F in replacement Rubber gasket 150mm dia ISI marked complete all as specified & directed by Engineer-in-Charge.
Description all as per Srl item No 41.00 above but 100 mm dia -do-.
S & F in replacement profile gasket (MS bracket) 100mm dia ISI marked suitable for non clog submersible pump complete all as specified & directed by Engineer-in-Charge
M&L PCC foundation of size 75cmx75cmx20cm with PCC 1:2:4 type B-1(ushing 20mm graded crushed store aggregate) including 8mm thick frame base plate of size 40cmx40cm suitable for 40 to 60HP Non Clog Submersible Pump including self drill bolt of size 150mm long and 15mm dia of shank fully threaded 04 Nos made of stainless steel complete all as specified & directed by Engineer-in-Charge. Note : The platform shall be constructed in sewage well of approximate 12mtr deep including dewatering if required and the contractor shall quote rate keeping in view the depth of sewage well and dewatering.
S & F in replacement single pahse preventor suitable for low/high voltage cut, over current, phaase failure complete all as specified and directed by Engineer-in-Charge
S & F in replacement over load relay suitable for 60 HP motor complete all as specified and directed by Engineer-in-Charge.
Description all as per Srl item No 46.00 above but 40 HP motor.
Description all as per Srl item No 46.00 here-in-before but 20 HP motor.
Description all as per Srl item No 46.00 here-in-before but 10 HP motor.
S&F in replacement 3 pole power contactor 415 volt, complete all as specified & directed by Engineer-In-Charge.
Description all as per Srl item No 50.00 above but 95 Amp -do-
Description all as per Srl item No 50.00 here-in-before but 80 Amp -do-
Description all as per Srl item No 50.00 here-in-before but 50 Amp -do-
S & F in replacement electric over load relay 0.6 to 60A 220V complete all as specified and directed by Engineer-in-Charge.
S & F in replacement fully automatic star delta starter in sheet metal enclosure with contactor 7 Penumatic timer of Cap 20 to 50 HP 3 phase complete all as specified and directed by Engineer-in-Charge.
S & F in replacement fully automatic star delta starter in sheet metal enclosure with contactor 7 Penumatic timer of Cap 20 to 40 HP 3 phase complete all as specified and directed by Engineer-in-Charge.
S & F in replacement fully automatic star delta starter in sheet metal enclosure with contactor 7 Penumatic timer of Cap 10 to 30 HP 3 phase complete all as specified and directed by Engineer-in-Charge.
Supply and fix Cast iron sluice valve 150 mm dia, flanged ends, stem (spindle) of SS, PN rating 1.6, conforming to IS :14846 with all new rubber gaskets of suitable size, and flanged ends having drilling as per IS:1538 including taking down old unserviceable sluice valve complete all as specified and directed by Engr-in-Charge. .
Description all as per Srl item No 58.00 above but 200 dia.
S & F in replacement MS Nut, bolts and washers of size 5/8"x3", 5/8"x4" long complete all as specified and directed by Engineer-in-Charge.
S & F in replacement rubber gasket joint for 150mm dia CI pipe complete all as specified and directed by Engineer-in-Charge.
Description all as per item No 61.00 above but 200mm dia CI pipe.
Taking down old earthing complete and M & L earthing complete with galvanized steel plate earth electrode 60cmx60xmx6mm thick surrounded by char coal and salt buried directly in ground vertically in pit of depth not less than 2.25 mtr below gound level with top edge of the earth plate at depth of not less than 1.5mtr below ground level surrounded from all sides by char coal dust and common salt in alternate layers of 15cm depth and earth plate lectrode connected to galvanised earth lead wirewith GI strip of 32x6mm by means of GI nuts bolts, check nuts and washers and connected to earthing test point drawn through and including 40mm dia GI pipe for protection including 20mm dia GI pipe for watering GI funnel, PCC earth pit (1;3;6) type C-2 with CI frame and RCC cover all as shown in electrical Plante No 3 on SSR Part-I including testing all as directed by Engr - in - Charge.
Desiliting/cleaning of sewage well of depth 12 Mtr and 9 Mtr dia taking out sludge by sludge vacuum truck in the form of solid also and getting out and removal to as distance exceeding 250mtr but not exc 500 Mtr and burried the same in low laying area as directed by Engineering - in- Charge.
Dismantling the UNSV sign board in sewage wells of Sector 'A', 'b' & 'C' . Supply and fixing of retro reflector board of size 4'x3' with high quality retro reflector tape green base high intensity prismatic sheeting (HIP) grade white retro tape cutting good quality with 3mm thick ACP sheet base including 40mm x 40mm square size MS pipe legs and all around the board appx 18 feet incl welding the MS flat plate of size 25mm x 3mm across the board appx 10 feet including grouting the sign board in PCC 1:2:4 complete all as specified and directed by Engr-in-Charge
S&F LED fitting surface and wall mounted, extruded Alumininum housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver including flexible wire for electrical connection and testing. Product Code: ENDURALINEARNEOBS20WLED830SPCWH and HSN Code:9405 complete as specified and directed by Engr-in-Charge.
Scraping old existing paint from MS board installed at Sector 'A' of any size installed at plant including making smooth surface and applying one coat of synthetic enamel red paint on surfaces and black paint on angles/channels including installation data written with white paint including earth work, PCC and welding of board complete of approved colour as directed by Engr-in-charge.
Scraping old existing paint from delivery line of any size inside and outside the sewage well including making smooth surface and applying one coat of synthetic enamel paint of approved colour as specified and directed by Engr-in-charge.
Dewatering sewage well and taking up rusty & chocked CI rising main 100 m dia from sewage well 10 to 12mtr deep opening up rusty & worn out nut & bolts cleaning the same with wire brush, bocky & refixing in sewage well by replacing nut, bolts & rubber gasket etc, complete all as specified and directed by Engr-in-Charge
Description all as per ser item No. 69.00 above but 200 mm dia.
S & F in replacement non clog dewatering motor complete set of 5HP including startor Panel connected items all as specified and directed by Engineer -in-charge.
Note :- Amount of credit of Rs. 74140.00 for retrieved materials is mentioned in Schedule of Credit mentioned in tender documents in pdf form which will be deducted offline while acceptance of tender.
Ansh Enterprises
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .